I 3D Printed a Toilet

cursed
PATREON: / emilytheengineer
Check out 3D Gloop!: www.3dgloop.com/
Sign up for a free Onshape account here: onshape.pro/EmilyTheEngineer
Instagram: emily.the.engineer
Tiktok: tiktok.com/@emily.the.engineer
Twitter: emilydaengineer
Dan: ​⁠​⁠‪@BuildDanielBuild‬
Merch: www.emilytheengineer.shop
Polymaker Filament: us.polymaker.com?aff=40

[@InsanityPlusOne]

I believe the falling in thing would be a problem with any toilet without a seat, the fact you eventually added a lid without adding the seat is extra cursed

[@anastasiszaro]

Please pin this comment.

[@johnecker]

@Emilytheengineer why do you think Frank has over a million subs but can not get this many views?

[@xathridtech727]

​@@johneckerbecause subs stopped meaning anything 3-4 years ago. With the customized home feed it matters who you watch not who you are subscribed to.

[@Deja117]

Realistically... You don't need a toilet seat. Not when toilet is seat. No really though, if people sit down and toilet then no seat needed. Unless the toilet bowl is really wide and you might fall in i-... Oh. Apparently seats also help separate your tuchus from the nasties that be. Seems obvious to me now...

[@InsanityPlusOne]

in general bowls have a wide lip, try sit on any toilet with the seat up, the width tends to be so you can clean them more easily@@Deja117

[@SkivaksXD]

now make it open source. call it OpenToilet. community will improve it. make mods and attachments. and next year you bring the original toilet that started it all to Open Sauce, set up a booth like a toilet room for people to use (optional)

[@dcurry7287]

Gridfinity compatible OpenToilet when?

[@Pappagar]

I can't wait to mod my 3d printed toilet

[@jan_harald]

don't forget to make it compatible with gridfinity while at it! and perhaps also lego while at it, just make it covered in the little lego nubbins all over (except seat, probably)

[@LKLM138]

inb4 this "open toilet" is blown out proportions and people are walking around in 20 ton toilet mechas made out of PLA

[@danwellington3571]

@@LKLM138Everything devolves into skibidi toilet eventually

[@pluggedinpete]

I think this is the ultimate expression of Ian Malcolm's Principle: "your scientists were so preoccupied with whether or not they could, they didn't start to think if they should."

[@UhrwerkKlockwerx]

This is like if William Osman and Michael Reeves had a daughter, the chaotic energy is hilarious and I love it. Definitely subscribing.

[@YossiRafelson]

William Osman did have a daughter. He calls her potato.

[@MaliohammadDesigns]

He meant a daughter of both william and michael reeves@@YossiRafelson

[@iambear.6526]

@@YossiRafelson So you're saying Emily's channel is a viewport into the future because Emily is Potato?

[@E-dart]

They were roommates, they couldave and that cept it secret

[@melonoverlord243]

Just curious how would 2 men have a daughter…

[@dolphin64575]

The toilet's comedic timing for the "last flush" @ 12:07 is perfect.

[@narxic]

You’re right. Got me good!!

[@spiritedkodama3508]

There's a certain amount of love and adoration I have for the determination to direct your ADHD through a series of 3D Printers, at the risk to Dan's mental health.

[@Srfingfreak]

And physical health!

[@soulsbreaker]

this is so accurate, and somehow also represents my life with my wife.

[@MR.JUSTCOD]

and sanity

[@tobyCornish]

Collab idea: Have James Bruton build some walking legs for this masterpiece, use AI vision to have it follow you around, and tell people it is an emotional support toilet.

[@martinschroederglst]

This is a magnificent idea!

[@hamsterbuilder7796]

Yes!

[@polerix]

Crab walking crap chair

[@OmniversalInsect]

The toilet from better call saul

[@jonathandill3557]

If my daughter 3D printed a working toilet with all of those features, I'd sincerely be beaming with pride despite my wife's review of this video.

[@ZephyrysBaum]

Your wife seems very critical, looking at the comments you’ve made on this channel lol

[@jonathandill3557]

@@ZephyrysBaum 😆 It's terrible, but honestly my daughter and I love to see her reaction to this and The Water Jet Channel 🤣 "Oh, God. What are these idiots up to now?!" I think she might put out a restraining order on Backyard Scientist to make sure there's no possibility that we can ever be neighbors, I suspect owing to my stories about high school.

[@ZephyrysBaum]

@@jonathandill3557 She's probably a nice person nonetheless!

[@jonathandill3557]

@@ZephyrysBaum Yes, she is, it's more like a family joke that my daughter and I bond over. This channel has made me more enthusiastic about actually getting a 3D printer. Printing something actually useful?✋🏻 Printing something that I probably shouldn't be printing? 👉🏻

[@ajreukgjdi94]

Emily: "You deserve one, last, good flush" Toilet: "How about no"

[@gabrieldudlicek8206]

Now that you’ve mastered printing large parts and welding them together, you should make a life size 3DBenchy and boat around in it.

[@johanbjorkman1914]

This is gold.

[@nathanielhill8156]

get a motor and make a 3D printed toroidal prop. (also, for the love of God, add a bilge pump and a triple hull)

[@clownwreck]

Have you considered getting one of those home filament recycling rigs, so you can turn your toilet back into useable filament for future projects? I've heard they are pretty expensive, but it might be worth it for the amount of filament you are using. And it might keep the EPA from nuking you from orbit.

[@potteryjoe]

So now you make a grinder & filament maker & recycle the whole thing. And all those other things. It'll be a hoot.

[@AceOfBlackjack]

Shush you horrible person, they are a great creator.

[@jackmuchukot7201]

boring

[@twinsunianlp7359]

It feels like Emily is reviving a phase of kids playing with “pooping” dolls

[@winter99999]

This video taught me how a toilet works.

[@kaboomgaming4255]

same

[@shelbyseelbach9568]

For the most part. It's not completely accurate.

[@Flyingcar100]

if you could print a clear one you could better see how it works

[@magebear7]

Unlikely as it is that you could orchestrate the exact timing of the collapse, I'm going to give you the credit anyway since it was an absolutely PERFECT ending.

[@spartenz14]

0:09 While everyone is talking about the toilet gag, I want to know, WHY HAVEN'T YOU PAINTED THAT ROOM PROPERLY????

[@UncleKennysPlace]

This was a gag?

[@uiopuiop3472]

nO TIME FOR THAT NO MORE NEVERM

[@draxgoodall3685]

My thought exactly

[@uiopuiop3472]

and nevermore@@draxgoodall3685

[@BruceNJeffAreMyFlies]

Good enough is GOOD ENOUGH!!! Welcome to ADHD, I built my house like 5 years ago and I still haven't finished painting half of it :/ Why paint, when there are things that haven't been 3d printed yet!?!?!?

[@nimoy007]

Somebody put that toilet in an art museum

[@dragonboii7864]

you could totally turn this into a flower bed, I mean its a rainbow of colours it would fit right in a garden it even has that art gallery vibe to it

[@_irdc]

I am *so* there for more of whatever this is.

[@drzruler]

The swirl of the toilet I fairly important for getting velocity to remove and travel the solids (for actual poops that is) very solid engineering though!

[@JustLost1030]

Truly the cursed content I am here for.

[@tdata545]

Kind of really like the weird 70s ArtDeco thing you got going on. It's like if Mondrian made a toilet.

[@nicholasmcintyre4166]

I like to imagine the inventor of the flushable toilet getting equally exited at the first successful flush.

[@ZaxstUser]

PLA toilets are little hobby of mine, I also love chaos and abstraction, this video checkss more marks than i thought its possible

[@midnightstudio3742]

DAN AS THE EPA LOL

[@Kinekitsu]

Emily’s war on the Environmentalists continues😂- This was absolute beautiful chaos and I’m here for it!

[@mandoreforger6999]

She is going to collect their rage and bottle it up. Then, of course, she should remind them that porcelain is among the least biodegradable manmade substances around. At the Titanic wreck, much of what is salvageable is the porcelain dishes, sinks, tubs and toilets. It will still be there, intact in a thousand years. PLA will have degraded 100 times over.

[@alveolate]

emily needs to do a collab with greta thunberg

[@sciencex-wissenschaftundte2587]

The Wheel breaking off the second time right before you wanted to pour the water in is such comedic timing, this Toilet is a paid actor

[@TheNextDecade]

I am so there with you on starting long prints that become failures. Just moved, all my machines are outta whack. Also for that neptune 3 layer shift? Tighten the belt, or grab yourself a linear rail upgrade!! Great vid Em!!

[@josuelservin]

The line between genius and madness is very thin, Emily came, murdered the line, chopped it to pieces and used it to feed 3D printers...

[@jaya-surya-t]

This is the best video I've watched in a while 😂. Please keep on doing whatever this is, Emily.

[@oo2454]

i think itd be a nice ride with 2 rear hub motors and 1 front fork for steering. so close to a street legal mobility toilet

[@pisskut]

Oh man I laughed so hard when the toilet broke at the end

[@Letsplayer9998]

As an engineer; I am screaming in my head. What a f-ing chaos 😂 no thoughts, just dos.

[@memejeff]

that thing looks incredible

[@bernardtarver]

The amount of direct and indirect waste (no pun intended) with 3dp is astonishing.

[@Fragdemented]

This was utter chaos and I loved it!

[@hawkings22]

Emily's just insane enough to be amazing

[@novamaster0]

I am really surprised that nobody tried putting a candy bar inside to see if it would flush.

[@BakeBakePi]

How do you keep coming up with more absurd ideas every video?! I love how you didn't just 3d print an ordinary toilet, but you added so many upgrades! Great video lol

[@EvilSpyBoy]

Ive discovered those garbage 3d pens are actually awesome 3d welders. Their tips melt the seam you trace and they fill it with filament

[@Nightowl423]

I think Emily should lose her 3-D printing pass for a week😂

[@turtleisaac]

Never until I found this channel a few days ago had I seen someone with such relatable levels of ADHD. I approve.

[@ecchikitty1395]

That was insane and I loved every moment of it.

[@TheAustralianDog]

congrats on 400k! well deserved!

[@ecoKady]

I've been waiting for a reason to justify to my wife purchasing a 3D printer. I feel this will surely tip the balance in my favor. I'm so glad I found you on the Maker Secret Santa. Have a happy new year!

[@shagreobe]

Thats where I found her too

[@Real_Name_Redacted]

How can you see this title and NOT click ?

[@Texans_fan-b8v]

Honestly I agree like the title of this video is just too good to not click

[@RealSnail3D]

You guys are doing a great job with these vids! Great dedication

[@lordmemester8798]

been looking forward to this video!

[@RandomPerson_860]

I did a thing but a girl

[@RG-3PO]

Where can I find an engineer wife with questionable creative tendencies, but with a solid level of mental stability like Emily? To appease the Woke Gods, she needs make a plastic recycler next. Even if she didn't use it as filament, she could figure out a way to "repurpose" it.

[@3dPrintCreator]

This is one of the funniest videos I have seen this year. Thanks Emily.

[@_SamDoesStuff_]

I love the chaos in your videos, such and inspiration to us all.

[@lennon4710]

This is literally the best video I've ever watched

[@alexphelps7042]

This channel is like the alternate timeline where william osmans house didnt burn down & he still builds stuff

[@jlnrdeep]

This is the amount of chaos for what i suscribed, Kudos !!!.

[@TheSpoonieSloth]

The absolute chaos was beautiful 😂😂😂

[@Aura-Of-Syrinx]

I love the whole vibe, reminds me of the sphere plastic puzzles!

[@wkdpaul]

First time viewer, and this was the most ridiculous thing I've seen in a while !!! Love it! *subscribed*

[@ZSchrink]

This video is absolutely amazing 🤣

[@skibdenhollander7361]

Your videos are a pendulum that swings between well engineered ideas and absolutely unhinged chaos.... and I'm here for it.

[@SomeoneNone123]

This would make a cool flower pot.

[@splsam8834]

I hope your Christmas video to This Old Tony has gotten you some more subs. You have great content, and your humor has me rolling.

[@Sillybutts]

First video I've seen of yours, knocked it out of the park.

[@Lizlodude]

At some point in the assembly process I had the deluded idea that you could color code the sections in the model to match the random filament so that you could use that to assemble it.

[@haphazardprism]

I dont know what i stumbled on here, its chaotic and i love it 😂

[@jasonlewis810]

New to this channel, and I took me literally 5 seconds of this video to know... I need to see more. Fantastic intro!

[@wingknutt1130]

Ah, the chaos! I love it!

[@erinkarp]

This is incredibly unhinged. I'm extremely glad that I'm subscribed

[@hazzard_destroyer]

Ok here me out Toilet racing. Also why is this one of the most glorious things I have ever seen 🤩

[@inactiveaccount8851]

For an actual toilet race, Check out the "dunny derby" in Winton Aus, as well as the toilet speedsters Colin Furze, Edd China, Paul Sender and Jolene Van Vugt

[@ZeroScapes]

This is so unhinged, I wish I had this kind of energy

[@_djengis]

I just saw a video from you for the first time. You had me impressed within the first 5 seconds. Subscribed.

[@witchdoctor6502]

what a chaos :D more please

[@christiankm8820]

how have i not discovered you sooner? this is hilarious

[@yan3748]

I just discovered this channel and i think i fell in love with it... what an amazing content

[@evilpenguin219]

another trick to help waterproofing is paint the inside of all the pieces with UV resin, even a 1000g bottle would do all of that size of print with room to spare

[@psirvent8]

And then set them in the sun for the UV resin to cure ? Would it work under winter sun though ?

[@heyspookyboogie644]

“I already committed to the bit” oh I feel you. 😅

[@UmasPapa]

I really don't want to admit how entertained i am by this😅 well done

[@TheArtOfSolo]

This is quality entertainment for sure 10/10

[@ExactlyThreeBraincells]

This is your first video I've ever seen, and I've been cackling the entire time. Thank you for sending off my 2023 with a high note holy crap lmao

[@thomasvlaskampiii6850]

This is the first video of yours I've ever seen. And you just earned a sub

[@KevinTurner-aka-keturn]

Using the non-hoverboard to provide motive force was truly inspired.

[@ngdeez]

I’ve been looking forward to this since that Safety Third episode

[@Zeldur]

This is so chaotic... So cursed.... Chaos engineering next to cursed robotics. Totally subscribing

[@yanickberthelot]

i hope you are keeping all your creations

[@mrglayden1690]

Just found your channel, love the insanity, reminds me of me, and setting up multiple prinnters then coming back to multiple failed prints *chefs kiss*

[@bonovoxel7527]

you guys are crazy 😂 happy New Year!

[@aianyoung]

This makes me so happy.

[@adolphbot]

This is amazingly funny. How about you make a huge 3D printer and print an igloo, next?

[@JoelCreates]

It's not wasteful if it's full of waste

[@theguildofthetranquilpine5360]

these are the videos I searched for in the past but no one had made a video yet

[@IllInformedHuman]

This was fun. My favorite part is how much this hurts the environment 😊

[@mbainrot]

I am so glad I found your channel via maker secret santa and safety third, the chaos levels, they're more than Michael Reeves and it's bloody awesome! Huge props for the immense amount of dedication to pull off what sounds like over a month of printing.

[@adirmugrabi]

having my dad telling you: "you're good" is my life long dream

[@OnnieKoski]

You’re a king. And a king deserves a throne!

[@bitzbox]

I'm actually quite impressed by the whole flushing mechanism. Very enjoyable and chaotic video

[@thewolfstu]

with the leftovers of the toilet you might need to do an episode on making your own filament recycler. lol

[@nathanielvanrumpt4126]

100% top tier A class content that I am here for always

[@opamitstinkefinger9962]

very funny!^^ pls more of them ^^

[@KevinTurner-aka-keturn]

So many pieces for something that large. You could really use a bigger printer. Maybe a 10' tall one?

[@nofunallowed3382]

So this is what unfiltered creativity looks like... So much fun should be illegal