I am DONE with this loader!

[@crslyrn]

Nice job getting the V Plow to work with the loader. Glad to see that you finally got a door for the loader. Thanks for sharing what you learned with this part of the project. Take care.

[@farmertylerranch4399]

Your dog was cracking me up!

[@brianworley7705]

Blake, when I saw the title, I thought oh no what went wrong. I guess nothing went so wrong that the loader is not sticking around the farm. That is good to know. Nice troubleshooting the wiring and getting the new harness to function correctly. Thank you for sharing the video, it is much appreciated.

[@Dudeya86]

I need to find a loader like that! Handy little dude

[@geoffburrill9850]

Great to see that door on, bet you could have used it in the winter. Well at least you have it now. Wow that plug and harness seems complex.

[@patcb829]

Tip of the diagnostic hat for that pin jumper fix. I can only imagine the time involved in figuring that out.

[@calumanderson5617]

Great video Blake!!👍 Love how Ivy is presenting her toy's on the camera on the loader and found a new use for a tug toy holder! 😄🐕‍🦺👍

[@frankponte4031]

Wow! Great work with the electro-hydraulic diagnostics Blake. Now you've got a tremendously versatile plow rog with a "fully" enclosed cab!

[@bfkpwd2]

As always, impressed by your ability to figure things out! Thanks for the video.

[@royosborn7869]

Nice job of problem solving - as you normally do. That loader should be a bit more comfortable to run now that you have a door.

[@danbeardshear1356]

glad you finally got your door. maybe you wont freeze as bad this coming winter

[@brianworley7705]

Watched this video again after your latest video on why you chose it and your workload, etc. Just wanted to go through it again. I was surprised to see you using the light blue tool to insert the pins for your jumper. I thought that was the removal tool for those terminals, not to insert. The plastic on ones similar I have used was so thin it likely would have split or broken if attempting to press to insert terminals. Obviously your mileage varied, which is good for you. 😉

[@georgeenriquez612]

Good job Blake! It’s always nice to see you posting videos

[@Nf6xNet]

I love how the dog was saying "I'm just going to set my toy here... right here, where you're filming..."

[@johncoleman1935]

I thought maybe the dog knew all along 😎.

[@Nf6xNet]

@@johncoleman1935 Oh, I think she knew exactly what she was doing!

[@michealsousa559california5]

Blake, you have a lot of Patience , great job.

[@artmrosla67]

Hello Blake, Nice video and glad you got this attachment figured out and working!!! I have ran this v-blade attachment for over a decade and they have their place when it comes to snow removal. As with most blades, … you will love it for opening up a driveway as long as the ground is frozen. I’m hoping you don’t get frustrated if it keeps tripping on you or digging in. That controller you took off is around $900 so don’t throw it out. They made two styles of these v-blades. One was rigid and the other could tilt for uneven ground. Another word of warning ⚠️ You have a big machine with a lot of weight and momentum. Take it slow until you get a feel of the attachment or you will have a folded up paperweight. I’ve seen quite a few new pieces totally wrecked from guys going wide open and hooking the tip on an obstruction. Good luck and best wishes!!! Art

[@timheasley612]

Goodness I'd be ripping my hair out over that wiring great video thanks for sharing 💪💪💪👍😎

[@AlextheDutchDairyfarmer]

I always think it's pretty cool to see something work like the designer intended. Nice job!

[@johncoleman1935]

Blake!, will you PLEASE keep the wind up there, wearing me out here in Egnar CO 😎.

[@simonstanyer8082]

Great to see you got the door, even if it has taken months

[@michaelowen1750]

Glad you were able to decipher the "security loop" in order to enable the other functions...

[@bloodydeath1222]

so i have some questions ok one when did you buy the loader and what is that shop you fix the loader in

[@bb38313]

Takes after his grandpa!

[@jaredcutshall4600]

It works, it truly was the blue wire

[@kmcwhq]

A door! Congrats! You have a lot of patience with the electronics.

[@shamrock56gargan96]

Always a way around the plugs

[@Glazed_Donut1776]

Are you out on the plains southeast of Cheyenne? Do you have issues with rattlers or bullnose snakes around the homestead? Asking for my dogs...;-)

[@jakeminogue]

66 series sheet metal 👀

[@tomki6asp]

Your dogs are hilarious

[@dehavenfamilyfarm]

Great job! I don't do well with electrical repairs lol

[@fredbrooks6488]

Good job

[@787Earl]

Thank you, I enjoy your videos.

[@ronniewalker2881]

Really enjoyed the video looking forward to seeing more

[@joelmollenkopf3767]

Excellent

[@PAYNEKILLER..]

I've always been told that bobcat uses some sort of proprietary pulse current to control their attachments. It's their way of keeping themselves separate from other manufactures or some shirt.

[@JD3D67]

I enjoy all of your videos Blake. I'm just wondering if you still have the Ford 8N tractor? My grandfather had one, and I have some early memories riding on it. Also, I learned to drive it when I was a young teen. Good stuff.

[@kangarafarmer6552]

Hey blake good to see you back in the vids , what ever happened to the ford ferguson you were doing up ,hope to see more content

[@jaredcutshall4600]

It works it was the blue wire

[@dbriggs1689]

I was wondering if you were still making videos? Its been along time.

[@canvids1]

Very interesting. You sure know your stuff

[@kenuber4766]

Blake....Are you still alive out there in Wyoming?? 5 month's is a long time to wait for a video. Hope all is well.

[@joeblan9426]

Sure have been missing your great videos.

[@beaseac]

awesomeness!

[@Theblindfarmer]

👍👍👍

[@chanceengelhardt3095]

Where you at Blake? I miss your videos man.

[@tedwpx123]

✔👌👍👍 Good job

[@dpeagles]

I've never been impressed with bob cat stuff.

[@wagon9082]

Good video

[@merrymanrc]

Are you gonna put a flashing warning light

[@tillman40]

Buy Japanese when possible

[@carlthor91]

Yep, Small Kubota made in Japan, Medium Kubota, made in USA. Largest Kubota made in Canada.😂😎

[@tillman40]

Takeuchi > all others

[@carlthor91]

@@tillman40 Varies.

[@WilliamTMusil]

Hiya Blake