Tap to unmute

I Am Luthier | Do Not Question My Methods | Using My Furniture Repair Skills On An Old Guitar

  Рет қаралды 290,603

Dashner Design & Restoration

Dashner Design & Restoration

Күн бұрын

Пікірлер: 536
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@valeriehowden471
@valeriehowden471 2 жыл бұрын
I see what you are doing ... trying to hypnotize us into watching the next installment with a swinging guitar. Lol. Worked on me.
@svenhohne2697
@svenhohne2697 2 жыл бұрын
Thank God we managed to convince you into publishing this video Dash, it would have been a shame not showing this awesome piece of work to the public. Great job, mate.
@liamfallon3139
@liamfallon3139 2 жыл бұрын
Please give us part two. I am dying for it!!
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part 2 is now up here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars.
@SlartiMarvinbartfast
@SlartiMarvinbartfast Жыл бұрын
@@DashnerDesignRestoration Still waiting for part 3 .......... 🙂
@jman70ify
@jman70ify 2 жыл бұрын
Been watching your channel for a few years and love your restorations. As a guitarist, even better when you move into guitar restorations.😃 intrigued to see how Dashner luthiery evolves…❤️🎸
@thetoneknob4493
@thetoneknob4493 Жыл бұрын
if you had a heat gun you could have pulled the finish up in huge sections some small spots might fight it but its worked evry time for me. i start by chipping a small spot to get s small air pocket under the finish than heat it up and carefully cut under it and lift witch peels large peaces off at a time without damage or gouges or scratches just whatever was under the paint.
@GilaMonster971
@GilaMonster971 Жыл бұрын
The big hole is where the Jack was until someone stepped on the cord. That’s why you always wrap the cord around the guitar strap.
@caroltanzi29
@caroltanzi29 2 жыл бұрын
Patching that larger hole was quite a job. Very cleverly done. This guitar was in bad shape when you found it. Looking forward to seeing the rest of the restoration. Carol from California
@SpiderSkot
@SpiderSkot 2 жыл бұрын
Nice work so far! Every time I caught myself wondering wtf you were doing, I'd stop and tell myself "He is luthier. Do not question his methods"
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you!
@ThelBosch
@ThelBosch 2 жыл бұрын
Wow I love your furniture restorations and guitars and guitar restoration is my hobby! My worlds have collided! Awesome!
@ZackVieira
@ZackVieira 2 жыл бұрын
I loved the patina’d look of the post-sand stage where the black was still in the wood grain. Throw a matte or satin clear coat on that and I’d be a happy customer!
@jeffbaker8074
@jeffbaker8074 2 жыл бұрын
Fantastic finish. Doesn't matter if you are not a "luthier" as so many of these "experts" are wont to point out. You are a craftsman who's skills translate easily to repairing this instrument. I mean it's not a Stradivarius people. As a guitar player this is my favorite video yet!!
@jimfranklin9770
@jimfranklin9770 2 жыл бұрын
Friend, I’m not familiar with guitar repair or glues to use. I am just astounded that you are using your skills to bring life back to an old soul. I think it is wonderful what you do with restoration.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you.
@Tom_Emody
@Tom_Emody 2 жыл бұрын
I’m new…….glad to be here. Thank you very much.
@MinionofNobody
@MinionofNobody 2 жыл бұрын
Over the years, I have acquired a couple of dozen electric guitars at very low prices because a prior owner had developed big plans for a guitar, stripped it, realized they were in over their heads, and given up. I have managed to bring every one of those guitars to better than new condition. Building, repairing, and modifying electric guitars is not rocket science. While I recommend that people avoid tackling a rare or expensive guitar as a first project, the narrator does an excellent job of showing what can be done with some basic skills and willingness to tackle a project.
@marekbage
@marekbage 2 жыл бұрын
Nice work so far! Pro tip for hole patching; put clear packing tape over the hole, trace the hole with a fine point marker, remove tape and stick it to some 4mm MDF (or similar), cut tracing with scroll saw. You now have a rigid template of the hole which, with an exacto knife, can be used to cut your veneer patches. Ask me how I know! 😉
@chappy675
@chappy675 2 жыл бұрын
LOVE the venture into new restoration territory. Your channel is my absolute favorite but it is even more exciting to see new and different things brought back to life! Especially love the guitar idea. Please do more things like this. But please be careful with those sharp razors around those beautiful hands!!! I am in love with your hands!😉✋🏻🤚🏻
@toddhall7416
@toddhall7416 2 жыл бұрын
Your videos are very therapeutic. Watching you do some interesting work to the calmness of your voice is relaxing. Your videos might be good for people with anxiety.
@maelstrom218
@maelstrom218 2 жыл бұрын
I'm primarily a hobbyist luthier with very measly woodworking skills, so it's a treat to see my hobby come up in this channel. Very impressive work on filling the input jack holes; I would've never thought of fixing them that way. Looking forward to the next video in this series--it's always a treat to see guitars (or basses) modded and/or spruced up.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you.
@pat_an466
@pat_an466 2 жыл бұрын
This is really interesting, and my goodness, I loved your ingenuity in the way you filled that big hole! Though I always worry when you use those utility knives, because I know how sharp they are!
@colinmartin9797
@colinmartin9797 2 жыл бұрын
I wouldn't worry about utility knives! I've been a paramedic for ten years and only ever seen one injury from them that was bad enough to need my help (and it involved tripping and falling into a ten foot deep hole as well!) Remember the saying, "cut towards your chum, not your thumb!"
@rhykko77
@rhykko77 2 жыл бұрын
I have modified, built bodies, and refinished electric guitars for years......and when you first said "I will use my furniture refinishing skills to do the job" I thought .....oh nooooo ! ...... but overall you've really done a decent job ! Strangely I kinda like the look of the stripped body just before you sprayed on the undercoat .......might have used that myself with a transparent slightly amber finish over top of the 'rustic' rough wood ......but that's me .... Thanks , great , fun video !
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thanks, wood is wood.
@colinmartin9797
@colinmartin9797 2 жыл бұрын
@@DashnerDesignRestoration I also thought it might have been a fun idea to put a clear varnish or shellac on the scraped surface. Cool contrast. But I have tried it on a bedside table and it turned out looking awful, lol.
@M5TABBYCAT
@M5TABBYCAT 2 жыл бұрын
I also like the look of the scrapped wood before the white base coat.
@bennyfactor
@bennyfactor 2 жыл бұрын
I'm not a guitarist or bassist or whateverist, but that shape of guitar - like BB King's - is my favorite looking one. Looking forward to how you finish it!
@robertw1871
@robertw1871 2 жыл бұрын
Gibson ES-335…
@renegadechic
@renegadechic 2 жыл бұрын
Looking forward to seeing the result. The state it was in before, can only be an improvement! Be interesting to see what you do with the neck. If you can get that feeling good, along with the body cleaned up, it's gonna really bring it back to life!
@customtailored1
@customtailored1 2 жыл бұрын
I enjoyed this video, and I can’t wait to see the final outcome. You should consider doing more of these types of restorations.
@82Matly
@82Matly 2 жыл бұрын
Génial le coup du "j'aurais pu enlever le vernis de façon propre mais ça aurait pris du temps, alors j'ai pris le racloir"! Ça en dit tellement sur la qualité du travail...
@loisbolton1800
@loisbolton1800 2 жыл бұрын
Also, I appreciate your working outdoors on such a nice day. It makes for a pleasant & relaxing, soft background sound. 🥰
@rpc717
@rpc717 2 жыл бұрын
As interested as I am to see the finished product, I'm looking forward to hearing you shred on it twice as much! 🤘🏼
@michaeltreadwell777
@michaeltreadwell777 2 жыл бұрын
WOW, that was different from your 'usual' renovations. Very clever way you filled that bigger hole. Can't wait for the next installment 🙂
@oldschoolkrist
@oldschoolkrist 2 жыл бұрын
Thank you for sharing all your magic tricks! Forming the patch to the body, plastic bags inside to prevent over spray…
@SophieT1416
@SophieT1416 2 жыл бұрын
Hello Barry. Very interesting video. I admire you problem solving skills. I look forward to the finished piece. Thank you. Janice
@pteddie6965
@pteddie6965 2 жыл бұрын
I was surprised to see a guitar when I selected your channel today. At first, I thought that I was not interested in watching. I am normally looking for furniture restoration videos. Since it was on your channel, I decided that I would see what you were doing. I'm glad that I did. I enjoyed watching you plug the holes in the guitar and I'm looking forward to watching you give this old instrument a fresh finish.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thanks for watching.
@thompson1374
@thompson1374 2 жыл бұрын
I’m with you. I check daily this channel among others. I’m addicted to this stuff.
@nathansmith6860
@nathansmith6860 2 жыл бұрын
Love seeing you experiment and do something different. Can't wait to see the finished product.
@lynetteswinburn5408
@lynetteswinburn5408 2 жыл бұрын
This is one episode that definitely ended too soon. I was enthralled! Looking forward to the next installment.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@jaycoob5821
@jaycoob5821 2 жыл бұрын
I recently bought a beat up Super Lynx to try and refurbish myself! Thanks for the video, and the comments explaining your hole-patching techniques!
@clivesilk3501
@clivesilk3501 2 жыл бұрын
i'd never question your methods i think they are just perfect ... amazing when finished ...
@ronniewilliford3449
@ronniewilliford3449 2 жыл бұрын
A fun project. Some of these methods would not have been my choice for a musical instrument, but the thought process was logical and methodical. I like seeing people just try stuff. The guitar was jacked up anyway. It's not like you could hurt it. (The white primer made my teeth hurt a little bit.) It's OK, though. Everything is going to be OK.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thanks for watching. Can you explain how any of the methods used would be detrimental to a musical instrument? The white primer coat for instance. How is a coat of paint going to hurt an electric guitar? I’m genuinely curious.
@doomprophet
@doomprophet 2 жыл бұрын
@@DashnerDesignRestoration The white primer is going to make it sound bad some how lol
@NotThatOneThisOne
@NotThatOneThisOne 2 жыл бұрын
@@DashnerDesignRestoration the white paint wouldn't effect the tone, but I'm confused as to why you'd paint before finishing the wood considering you said the previous paint had sunk into the grain. Wouldn't it be a better finish to really sand it (much finer grit), grain fill it (since it sunk in last time), sanding that back (even finer), and then giving it the first coat? Just concerned that it'll be a pain to get a really good finish on a rough, spongey surface. On the other hand, the constant sanding for a guitar is a real pain in the bum for a casual project.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
@matt lang I painted it before filling the grain because the mottled color of the unpainted wood made it too difficult to see the imperfections that needed to be filled. Having it all one color made it a lot easier to pick out the imperfections that needed to be fixed. Since I uploaded this video, I've grain filled it and now have a nice smooth finish for the color coat.
@ronniewilliford3449
@ronniewilliford3449 2 жыл бұрын
@@DashnerDesignRestoration Can't wait to see the next vid. I like seeing these kind of things come together.
@1959Berre
@1959Berre 2 жыл бұрын
I admire your guts for entering this field of craftsmanship. As always, your methods are "down to earth" and without any snobbery. This may not be the most perfect way, but it certainly is better than not trying or being afraid of doing it. BTW, the types of glue have little or no effect on the sound. After all it is an electrical base guitar, though I would not recommend these methods when restoring a high end acoustic instrument. But I am pretty sure you know that yourself.
@ReconstructingEmily
@ReconstructingEmily 2 жыл бұрын
I am loving this change and explanation of the instruments construction. Looking forward to the color choice you made!
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thanks!
@jupiterlegrand4817
@jupiterlegrand4817 2 жыл бұрын
Since I have been a guitar builder for 40+ years, I can confidently say that you most certainly have furniture repair skills. Cheers.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you. I’m also a licensed Luthier.
@MyName-nx1jj
@MyName-nx1jj 2 жыл бұрын
@@DashnerDesignRestoration Better keep it on you because you're bound to be pulled over.
@loisbolton1800
@loisbolton1800 2 жыл бұрын
The guitar body swinging at the end was mesmerising, like being hypnotised: “You will watch the next instalment.”
@Flecha57
@Flecha57 2 жыл бұрын
The moment I saw those two holes I thought about how in the world you would repair them... I always learn something (and new words too) from watching your videos. But this time, wow... I would have never thought about making those kerf linings. Not to mention how to get them inside the bass body. Simply brilliant. You have taken your skills to the next level. I would have taken the easy way out and would have converted that hole into a rectangle. But, what do I know? I have been waiting for this video... but I was not expecting a cliffhanger!!!! I want part 2 by tomorrow. 😆 P.D. If you haven't heard the podcast, I strongly suggest you do! 🥰
@nuthinbutlove
@nuthinbutlove 2 жыл бұрын
Great job at taking what looked like someone's trash and attempting to turn it into someone else's treasure. Looking forward to seeing the final product!
@fabiotommasi5273
@fabiotommasi5273 2 жыл бұрын
It was stunning without any colors..!!! Suppose to use an oil finish or a transparent primer on the body... Gorgeous!
@staleyexplores
@staleyexplores 2 жыл бұрын
I actually watch your channel for hints on how to finish guitars lol....my worlds collide, keep up the good work!
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you!
@ShellyCline
@ShellyCline 2 жыл бұрын
Oh man, a cliffhanger??!! I'm on the edge of my seat lol. Seriously I was really into it and looking forward to seeing you perfect the surface and paint it. Loved this video. Definitely looking forward to part 2.
@janice5108
@janice5108 2 жыл бұрын
He never posted it
@ShellyCline
@ShellyCline 2 жыл бұрын
@@janice5108 he probably will eventually. Let's hope 🥰
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@incognitiously
@incognitiously 2 жыл бұрын
I really enjoyed watching you take on a different kind of project! Can't wait to see the next installment.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you.
@raspberrycream
@raspberrycream 2 жыл бұрын
Its looking nice so far! Excited to see where you decide to take this project
@shannonschwab3754
@shannonschwab3754 2 жыл бұрын
CLIFFHANGER!!!!
@traceyrice
@traceyrice 2 жыл бұрын
What an interesting project! I can't wait to see the finished guitar. 💜
@indie825
@indie825 2 жыл бұрын
I think this is the first cliffhanger repair video I've ever seen BRAVO!!! I'll be white knuckling it till them. 😱
@barbaracatalano6299
@barbaracatalano6299 2 жыл бұрын
This is awesome! Love the furniture but this is great!! Looking forward to the next installment.
@Timhey0912
@Timhey0912 2 жыл бұрын
You do YOU! That's it! I respect the work you've done over the years and I believe you respect the items you work on also. 'nough said.......... can't wait to see it completed!
@neilmorten6416
@neilmorten6416 2 жыл бұрын
This is AWESOME! I can't wait for part two.
@huckleberry12
@huckleberry12 2 жыл бұрын
this is sick! I can't wait for part 2. Also, thank you for calling it the output jack, too many people call it the input jack but that's not the way the sound travels.
@stevee1692
@stevee1692 2 жыл бұрын
The strings are the input
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@Bangkokguitar
@Bangkokguitar Жыл бұрын
Very nice approach! I like your thinking process. Well-done!
@xdoctorblindx
@xdoctorblindx 2 жыл бұрын
It's fun watching a non-luthier do this kind of work! Totally "wrong" in many ways, but so creative in the approach!
@MrZerohour1967
@MrZerohour1967 2 жыл бұрын
Even though I have no expertise in this area, just seeing the "Do Not Question My Methods" in the title, makes me feel compelled to question your methods!
@demcomp
@demcomp 2 жыл бұрын
From coffee tables to Vintage Guitars.. now it's getting interesting! 😊
@petestaint8312
@petestaint8312 2 жыл бұрын
Can't wait to see the end result! Good selection of bass guitar. 👍
@redfullmoon
@redfullmoon 2 жыл бұрын
Your narration and voice are so calming for me, it feels like watching something on PBS or like a wood restoration version of Bob Ross. Subscribed.
@olinewman
@olinewman 2 жыл бұрын
I have an almost identical bass, that some a-hole painted in almost identical black paint. Can't wait for Ep 2. xx
@Jenisonc
@Jenisonc 2 жыл бұрын
So fun! Bringing life back to her. Can't wait to follow the process.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thanks for following along.
@ardentea
@ardentea 2 жыл бұрын
I hope we get a part 2 this time.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@MB-xw1tu
@MB-xw1tu 2 жыл бұрын
This amused me because I spent quite awhile looking at some repair videos to do very minor crack repair of my husband's acoustic. Then the world collide.
@brettkramer
@brettkramer 2 жыл бұрын
Wow, so excited to see this brought back to playability, nice work !!
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank You!
@psykoelvis
@psykoelvis 2 жыл бұрын
Nothing to question here!You are amazing!!!
@dodgyboy8318
@dodgyboy8318 2 жыл бұрын
Very clever idea using the kerfing to help plug the hole.
@foodforthegods
@foodforthegods 2 жыл бұрын
I almost gasped when the binding became visible. What a nice surprise!
@rirkc
@rirkc 2 жыл бұрын
A bit outside of your wheelhouse, but so far, so good. Thanks!
@MDJeeper
@MDJeeper 2 жыл бұрын
This isn’t his first guitar restoration video. Go back a couple of years. 😉
@ughhhh6953
@ughhhh6953 2 жыл бұрын
Love the deviation from your norm, while still keeping it relevant to the channel.
@SockyNoob
@SockyNoob 2 жыл бұрын
Wow! Never thought you'd repair wooden instruments. Can't wait for a piano restoration.
@moonchildjs59
@moonchildjs59 2 жыл бұрын
Hey, I got a 1966 Vox Teardrop! I’m excited to see you restore that guitar!
@bierce85
@bierce85 2 жыл бұрын
The best way to see imperfections in the substrate is to take the piece into a pitch black room and shine a flashlight over it, or move it around in relation to a lamp. Even the smallest imperfection sticks out like a sore thumb.
@mica_micasa
@mica_micasa 2 жыл бұрын
So interesting. So quiet and peaceful, too. I enjoyed watching this from the beginning to the end. 🙂👍🏻
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Thank you.
@cathyb2204
@cathyb2204 2 жыл бұрын
I have a Gibson A-5 that was painted with black automotive paint a la Johnny Cash. It's great to see guitars brought back from the dark side like this.
@gaard601
@gaard601 2 жыл бұрын
Looking forward to the next installment. Thanks.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@gailgaddy5340
@gailgaddy5340 2 жыл бұрын
Dang didn’t want it to end, can’t wait for part two 👍
@mikemackinaw
@mikemackinaw 2 жыл бұрын
Ok,you got me hooked. I subscribed..I am waiting for the next installment.. I would love to see more guitar work.
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@wordsofjed
@wordsofjed 2 жыл бұрын
Great video as always! Excited for part 2!
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@andrewmize823
@andrewmize823 2 жыл бұрын
I have some experience with guitar repair, though it's been a few years since I worked on a guitar. There are a few things in building and fixing guitars that require specific, craft-oriented knowledge, but luthiers and repair guys rely just as often on basic general wood-working skills. A person skilled at furniture restoration is actually a really good fit for this kind of work, because there's a good deal of overlap when it comes to making good, stable repairs that don't stand out too much. Good job, man!
@dianneroney1572
@dianneroney1572 2 жыл бұрын
Look forward to seeing your next part of this restoration 👍🇦🇺
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@tilehilder
@tilehilder 2 жыл бұрын
That primer trick is pretty clever. Thanks!
@dustinatwater9478
@dustinatwater9478 2 жыл бұрын
I hope you are enjoying the fall weather. I was just wondering if you still plan on doing a second installment of this video. Thanks!
@DashnerDesignRestoration
@DashnerDesignRestoration 2 жыл бұрын
Part two of this video can be seen here kzbin.info/www/bejne/Y3qbqoSDot6qhJI . It's on my other channel, Dashner Guitars. I combined parts 1 & 2 into one video. Thanks for watching!
@grammybear4226
@grammybear4226 2 жыл бұрын
🐼 Big Panda Bear Hugs from a 68 yr old grandma in Texas, USA 🐼 ❤ 🎀 ❤ 🎀 ❤
@davidoviedo7851
@davidoviedo7851 2 жыл бұрын
Thank you for your ingenuity and the inspiration
@DarkGT
@DarkGT 2 жыл бұрын
That will be interesting. I will enjoy to see other musical instruments restored too.
@ssourick
@ssourick 2 жыл бұрын
Love this video as always. Can't wait for part 2 to see what you do with this piece of woodwork.
@fluturisialbine2585
@fluturisialbine2585 2 жыл бұрын
good luck , you re very skillful! a nice voice too, sounds like a story teller!
@stevenfolino405
@stevenfolino405 2 жыл бұрын
Brand new here! Highly interesting! Loved how you did the kerf thing! That was cool. Also big thanks for sharing the tonal qualities of assorted glues! StewMac does NOT publicize THAT information!🤣 I’m hooked! Looking forward to the next installment, PEACE!
@RM-vw3ov
@RM-vw3ov 2 жыл бұрын
Oooo interesting! And it’s lovely to see an old misused instrument get a second chance at music making!
@dnantis
@dnantis 2 жыл бұрын
Amazing old output jack huge hole fix !
@that_thing_I_do
@that_thing_I_do 2 жыл бұрын
Looks brutal to start,, waiting to see it finished!
@fannycraddock99
@fannycraddock99 2 жыл бұрын
Nice job, can't wait to see the final reveal.
@howardperlin3016
@howardperlin3016 2 жыл бұрын
Loved the patina before the primer
@lustucrugf5591
@lustucrugf5591 4 ай бұрын
Little tip if you wanna make better patches ; bevel the area you wanna fit it to, with the right wood and fitting, will be completely invisible and much more durable too.
@DashnerDesignRestoration
@DashnerDesignRestoration 4 ай бұрын
I am luthier. Licensed in three states and two commonwealths.
@BlueberryStinkFinger62
@BlueberryStinkFinger62 10 ай бұрын
Gibson uses veneer and lots of it....Gibson's semi-hollowbodies like the ES-335 and ES-339 have tops and backs constructed of layers (either 3 or 4) of maple veneer. My understanding is that the veneers are assembled in successive cross-grain layers with the top layer having its grain longitudinal to the length of the guitar. The tops and backs are approximately 1/4" in thickness after layup.
@DannyBrooks1
@DannyBrooks1 2 жыл бұрын
I liked the vintage look of the body before you painted it.
@colorfullyme
@colorfullyme 2 жыл бұрын
I laughed out loud when the pencil lead fell out at 11:10 xD No one is expert enough to avoid the traps of a faulty pencil apparently haha
@milosnipez2753
@milosnipez2753 2 жыл бұрын
i didnt want you to paint it! it looked so unique!
@Thoracius
@Thoracius 2 жыл бұрын
How are you going to attach the output jack back in its original location with all that new support kerfing in the way?
Rattle Can Refinish On A Vintage Electric Guitar
23:18
DashnerGuitars
Рет қаралды 46 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Total restoration of a broken guitar | Martin Classical Guitar (Part 1)
37:58
Restoring a 1958 Fender Stratocaster with NOS 1950s Lacquer!
21:30
Mike & Mike's Guitar Bar
Рет қаралды 284 М.
1977 Fender Telecaster - Restoration
21:26
TON - Guitar workshop
Рет қаралды 109 М.
Martin D-28 restoration with Lars Dalin
15:20
Lars Dalin
Рет қаралды 1,9 МЛН
Fender Stratocaster | Old Guitar Restoration
42:27
Rusty Restore
Рет қаралды 3,2 МЛН
Saving a guitar from the trash - Repairing an electric guitar
28:53
Gabriele Réti
Рет қаралды 221 М.
Total restoration of a broken guitar | Martin Classical Guitar (Part 2)
28:42