I Bought THE WORLD'S SMALLEST IMPACT DRIVER from Japan And it has a CABLE CUTTER Attachment!

This is one of the coolest Drivers on the market! Yet hardly anyone knows about them.
It's also the world's smallest impact driver... kinda.
EZ1PD1 (Bare Tool) amzn.to/3FDWrcW
EZ1PD1 Kit (AS SEEN IN THIS VIDEO) amzn.to/40iHTJw
Crimping Attachment amzn.to/3QHbF7i
Cable Cutter Attachment amzn.to/49tgRDs
EZ1PD1 Slim 3Ah Kit (No attachments) amzn.to/3QkMLJp
If this description contains links to Amazon or Ebay, as an Amazon Associate and EPN Associate I may earn from qualifying purchases. This doesn't cost you a thing! But it means I can make more videos for you.
/ toolsandstuff
/ toolsandstuff
My Other Channels
/ buildsstuff
/ @voicelesstoolreviews
GRAB ONE
18v Heat Gun ebay.us/vsRUCs
40v Metal Cutting Circular Saw ebay.us/NxKKAW
40v Polisher ebay.us/S6JHTH
40v Trim Router Clear Base ebay.us/icqSKI Plunge Base ebay.us/sk9HEB
40v ebay.us/tq4djd 260mm (10-1/4") Circ saw with a 97mm depth of cut, adjustable & removable front, AWS and track compatible!
40v Recip FASTEST IN THE WORLD ebay.us/jv9KUy
40v Planer ebay.us/XDkiiK
40v Plunge Saw ebay.us/rpuYi5
40v AS001G Dust Blower shop.handyhardware.co.nz/maki...
40v CF002G Fan shop.handyhardware.co.nz/maki...
18v FR451D Screw Gun ebay.us/4NjFZH
SANDER ebay.us/31FcGM
KETTLE ebay.us/HsAqPJ
125mm FLUSH CUT SAW ebay.us/mIts9Z
PURPLE MAKITA IMPACT DRIVERS (& OTHER COLOURS) MADE IN JAPAN
NEW 18v Makita TD172D in all available colours ebay.us/HADzgU
18v Makita TD171D in all available colours ebay.us/b7erGy
40v Makita TD001G in all available colours ebay.us/kzI7Uq
My Other Channel / buildsstuff
VOICELESS TOOL REVIEWS / @voicelesstoolreviews
►►►I get most of my tools from shop.tradierepublic.co.nz/
►►Get some 40v tools in the UK & Europe amzn.to/3306Htf
►Makita 40v finally available in the US! amzn.to/3tszyAP
More Makita XGT 40v Videos
40V DUST BLOWER • Makita 40v Dust Blower...
40v 125mm CIRCULAR SAW • Makita 40v 125mm Circu...
40V 165mm CIRCULAR SAW • Makita 40v 165mm Circu...
40V 185mm CIRCULAR SAW • Makita 40v Circular Sa...
40V 185mm TRACK COMPATIBLE CIRCULAR SAW • Makita 40v Track Saw O...
40V 235mm TRACK COMPATIBLE CIRCULAR SAW • 40v Makita 235mm Circu...
40V 270mm TRACK COMPATIBLE CIRCULAR SAW • Makita 40v 270mm Track...
40V 185mm REAR HANDLE CIRCULAR SAW • Makita 40v Rear Handle...
40V 260mm REAR HANDLE CIRCULAR SAW • Makita 40v 260mm Circu...
40v PLUNGE SAW • Makita 40v Plunge Saw ...
40V CHAINSAW #1 • Makita 40v Chainsaw Re...
40v MITRE SAW • Makita 40v 216mm Mitre...
40V BRAD NAILER • Makita 40v Brad Nailer...
40V INFLATOR • Makita 40v Inflator VS...
40v STICK VAC • Makita 40v Stick Vac V...
40v 125mm CIRCULAR SAW • Makita 40v 125mm Circu...
40V 165mm CIRCULAR SAW • Makita 40v 165mm Circu...
40V 185mm CIRCULAR SAW • Makita 40v Circular Sa...
40V 185mm REAR HANDLE CIRCULAR SAW • Makita 40v Rear Handle...
40V 260mm REAR HANDLE CIRCULAR SAW • Makita 40v 260mm Circu...
40V GRINDER REVIEW • Makita 40v grinder Vs ...
40V 6" 150mm ANGLE GRINDER • Makita 40v 6" Grinder ...
40V 7" 180mm ANGLE GRINDER • Makita 40v 7 Inch Angl...
40V 9" 230mm ANGLE GRINDER • 40v Makita 9" Grinder ...
40V FAN • Makita 40v Fan Review ...
40V BLOWER • Makita 40v Blower Revi...
40V WORKLIGHT #1 • Makita 40v Worklight R...
40V ALL DRILLS COMPARED • Makita 40v Drill Revie...
40V IMPACT WRENCH #1 • Makita 40v Impact Wren...
40V IMPACT DRIVER #1 • Makita 40v Impact Driv...
40V ROTARY HAMMER DRILL • Makita 40v Rotary Hamm...
40V RECIPROCATING SAW (SAWZALL) • Makita 40v Reciprocati...
40V COMBI DRILL (HAMMER DRILL) • Makita 40v Hammer Dril...
40V CHARGER & BATTERIES • Makita 40v Batteries a...
40V DUAL RAPID CHARGER • Makita 40v Dual Rapid ...
40V DRILL CLUTCH SETTINGS • Makita 40v Hammer Dril...
40V RADIO #1 • Makita XGT 40v Radio |...
40V BATTERY CHECKER #1 • Makita Battery Checker...
EVERY 40V CIRCULAR SAW • Every Size of Makita 4...
MORE VIDS
My Top 5 18v Makita • My TOP 5 Makita 18v Co...
My Top 5 36v (18v x2) Makita • My TOP 5 Makita 36v Co...
Homemade Hot Tub • How to Build a Hot Tub...
MY AMAZON STORE www.amazon.com/shop/toolsstuff
Correspondence
[e-mail]
If this description contains links to Amazon, as an Amazon Associate I may earn from qualifying purchases. This doesn't cost you a thing! But it means I can make more videos for you.
#ToolsandStuff
#BuildsandStuff
#KiwiToolReviews

[@samhassall1926]

My old boss had one of those Makita cases for 5 years before I showed him it had another compartment 😂😂he was blown away

[@richiejames928]

Panasonic used to make the innards for everyone else’s batteries, dunno if they still do tho. they made really good tools but just got left behind because they never expanded the range! they where brushless before most of you had even heard the term brushless.

[@riba2233]

They make cells for tesla still, but were never big for tools cells. Some use sanyo which is a sister company, but most tool brands use Samsung, LG, and murata/sony

[@abelgerli]

Seems that impact driver addiction is still going hard 😂😂😂

[@toolscientist]

I always thought one of the smaller brands could shake things up by releasing a whole lot of specialised heads for an installation driver. The big players wouldn't do it as they want to you to buy more skins rather than attachments. I was hoping Hilti would do it, but this seems pretty good. Need a nibbler, polisher, die grinder, sander, riveter, etc.

[@robertrada6040]

Bruh, Black & Decker have eleven hundred attachments for their drill.

[@ToolsAndStuffOFFICIAL]

Remember those old B&D circ saw attachments... ahh memories.

[@toolscientist]

​@robertrada6040 i meant a serious brand. Those are dinky DIY tools. What I want is to not have 50kg of skins to haul around to cover nibbler, shears, dremel, rivet, etc. You can already get 3rd party drill attachments for these, but they often require you to hold it, or have a flimsy arm that clamps on the battery.

[@ToolsAndStuffOFFICIAL]

It would be nice if Stanley Black & Decker had a premium brand of power tools.

[@toolscientist]

@@ToolsAndStuffOFFICIAL Dewalt is in the business of selling you 50 different skins, so they'd never make a premium version of this

[@davetaylor4741]

Haven't had any Panasonic tools in over 30 years. Had some of their early cordless drills. The ones they would probably have liked to bury. They had high speed chargers with them. That destroyed the batteries in not many charges. You got free replacement batteries. No questions asked. Until you didn't. And the tool went in the bin. Think I had an electric drill about the same era. Don't see them around much. Mostly the big three. Milwaukee. Dewalt. And Makita. Would love to try the new Hilti Nuron stuff. But nowhere near any outlet. And a bit pricey. Tough being a tool junkie.

[@MightyHawx]

First impact driver I ever saw was a Panasonic back around 2008 or 2009, blew my mind! Fairly sure it was brushless too!

[@chipperkeithmgb]

Yeah I have had one since then got it in Florida when on holiday from oxford England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@niskytank]

Nice review, good to see Panasonic getting some love! There is also a EZ9HX504 drill chuck attachment that is physically compatible, but isn't really designed for use with an impact. Could be a fun test!

[@designerprojects8137]

Been using Panasonic for years. Still have my first batteries bought so long ago I can't recall how many years old they are. Replaced 3 impact bodies, 2 drills & one charger but same old batteries lol. Best ergonomics, great drill speed, plenty of power. Absolutely love them. When I seen their tiny impact from Japan I had to grab one. What can I say...they know how to make a great tool (few seem to be aware of). When I get around to it or feel I need them sooner, I'll order the offset/angle attachments one day. Highly recommended this drill, you won't be disappointed

[@riba2233]

Very nice concept with all those attachments! Crimper one would be useful if it went all the way to 120mm2. Btw this new location is looking so nice, I'm a bit jealous 😁

[@is5032]

I’d love a compact 18v installation drill/impact driver from the major brands. It’s one of the only M12 tools I have as an M18 version doesn’t exist. A DEWALT version with their super compact Powerstack battery would be ideal as I love my DCF850. I think Panasonic are on to something with this great looking tool.

[@toolscientist]

Bosch has an 18V Flexiclick

[@BlueHeron598]

If you want the most compact impact driver the Milwaukee M12 Gen 3 Fuel is the best. I have that Dewalt and a Makita 40v. Best part is that the battery goes into the handle..Bosch 12v has one similar with all the attachments too. Haven't tried that one, but I'm very happy with the power of the Milwaukee

[@joshsmith981]

Haha, love the ending, you the man tools, love the reviews mean bro.

[@dustinkrebs8229]

That bit storage is genius 👏👏👏👏👏

[@maxkarlsson7326]

The Hikoki installation driver is available in Europe👍

[@alexdumford8044]

Awsome review! Would like a review of the bid11xr ryobi/kyocera if possible thanks!

[@Joethetoolguy]

Some day we’ll have a brushless motor with a collet on a wrist strap for the ultimate compact 😅

[@l...]

Measure from top to the center of the pit

[@donlamb1800]

Used a Panasonic Impact driver years ago on a roofing job... we ended up burning it out fairly quick. The failure was primarily in the batteries, the contractor was miffed cause the tool wasn't cheap. 😅

[@Tyro207]

Now that the new DCF860 is out, you know what to do 😉. You might be the first one if you put it up against the M18

[@markr1142]

I've been using Panasonic for 20 years, never had one break can't say that for Dewilt...😂

[@RTTRn]

You have a stinking hot day and over here it’s bloody freeezing! 🥶

[@ToolsAndStuffOFFICIAL]

It's never bloody freezing here. 😁

[@RTTRn]

@@ToolsAndStuffOFFICIAL NZ gets cold too in the winter 😅 I lived in Adelaide, Oz and i’ve never been so cold as there in the winter because the houses aren’t insulated. At least in Finland it’s warm inside even when it’s -30 outside.

[@ToolsAndStuffOFFICIAL]

Adelaide is cold by Australian standards for sure, but not bloody freezing. I live in Auckland where the lowest recorded high was only 9°C. You may be warm inside at -30, but at least we can go outside in jandals all year round 😂

[@RTTRn]

@@ToolsAndStuffOFFICIAL My goal is to walk in sandals all year round too 😎👍

[@pablo.michelin5362]

Nice tool and review, envious of the battery easy slide on/off. Makita 18v batteries are ok but my newish of kit 40vMax real difficult, lots of friction there and as a builder tools get very dirty and it only gets worse. Haven’t heard anyone complain, I have 7 batteries and it’s just painful. I like how with the Panasonic you were able to slide the tool on the battery just sitting on the table, good stuff. That is my whinge for today, thank you.

[@hamishcoyle1283]

When did we start drinking beer in over sized wine glasses?

[@Pete.Ty1]

👍👍👍.Thank you

[@johndalessandro6433]

Pretty cool set up. Do you think the battery holds tightly to the tool better? Especially after a few years?

[@chipperkeithmgb]

Got the yellow one nice impact I was in yellow house at school 😂

[@gf2e]

That right angle attachment seems a lot longer than the one on my Bosch installation driver. The Bosch main body is quite a lot longer so I’d assume that the Panasonic is still shorter. But that’s kinda annoying :) The thing I personally love most about the Bosch is the low speed trigger control. I’m using it a lot in my RV where there are a lot of annoying self tapping wood screws in plywood or particle board. The Bosch lets me remove and reinstall screws like that with very little risk of damage. It’s even better than a manual screwdriver because they go in straighter. So, for my personal use, as tempting as that Panasonic is, an impact scares me :) Thanks for saving me lots of money. I got most of the joy of playing around with the tool, with none of the regret of realizing that it has annoying features that will make me not use it enough to justify the $$$.

[@Greg....]

one of the companies in the background..... Big ryobi guy

[@rene5861]

Pretty strong for a installation driver

[@samhassall1926]

Haha the old 309 road. Had a very buzzy experience there

[@Hand-Driven]

Beat me to it

[@josephmerz2666]

love it but i still want a dedicated right angle impact .bought my makita 30yrs ago it seems .yes makitas right angle is gutless but still gets used often .it is a daily carry ,always with me . please tool Gods can we get a more powerful brushless right angle impact in makita 12v ,dewalt 20v[powerstack battery] or milwaukee m12 . Makitas has a very small head which is amazingly helpful .You need one !

[@moozeex1]

Been using panasonic tools for 7years Bateries are unkillable

[@RobertVisser]

Hi. Thanks for the Panasonic EZ1PD1 review. It's option for a wire cutter looks like it'd be a useful addition. What's the model number of the Hikoki Installation driver? Thanks again.

[@stevejobs5533]

Best scotch tool reviewer on youtube

[@ToolsAndStuffOFFICIAL]

Are you trying to wind me up Steve Jobs? If that is even your real name???🤔

[@stevejobs5533]

@@ToolsAndStuffOFFICIAL which brand would you recommend for the highlands of scotland?

[@ToolsAndStuffOFFICIAL]

@@stevejobs5533 You're huffing something wrong. Your real name isn't Rob by any chance?

[@stevejobs5533]

​​@@ToolsAndStuffOFFICIALmy name is Brett McDonalds

[@ToolsAndStuffOFFICIAL]

Then you should know that no part of Scotland looks like this video.

[@robertrada4783]

You should review a sawblade sharpener next.

[@ToolsAndStuffOFFICIAL]

That's a fucken wicked idea 💡

[@Max_Marz]

Please god makita, bit storage!!!! and not at the expense of my hook!!! Love this thing.... damnit

[@GeneCaralde119workshop]

Is it shorter than the Kyocera Ryobi XR?

[@EliotTruelove]

A patent just dropped in america for a stubby XGT impact, although I dont think it will be that short and doesnt seem to be an installation driver

[@riba2233]

Really, didn't see that one, nice info :)

[@aaronoconnor606]

That's pretty slick will makita be making one?

[@ToolsAndStuffOFFICIAL]

There is a patent I showed in one of my videos for something similar.

[@exit-zero]

Can we get a review of your orange juice, looks awesome

[@ToolsAndStuffOFFICIAL]

It is.

[@moddedimlose]

Can you tell us more about the 97mm Makita you reference? I can't seem to find any leaks/info online.

[@ToolsAndStuffOFFICIAL]

Look harder.

[@leoionita8083]

Those are also available herein the nederlands. Only in black tho

[@blueturkey]

Did you keep the receipt?

[@pe456nj]

Are you able to get the battery delivered to you from Japan where you are? I'm in the US and could not get any shipped to me.

[@ToolsAndStuffOFFICIAL]

Yes. As long as they are under 100Wh or 6Ah, you can air freight up to 2 batteries.

[@marcandrelegermusic]

Orange Juice LOL che brah!

[@Digital_Decay]

i too am a big fan of "orange juice" on a hot day

[@whya2ndaccount]

Is the opening scenic views of Footrot Flats - "Slice of Heaven"?

[@vink6163]

Is the charger really 120V only? I thought thanks to economy of scale most chargers are universal so they can sell the same internals just with a different plug on the end.

[@josephmerz2666]

Makita Does have a 12v Right angle impact . Can you review this ,it is very expensive and not brushless .Does it have more power then the 18v . If you get one to review you will then wish you had one sooner

[@riba2233]

It doesn't have more power than 18v, even the cheap skill unit is more powerful

[@craigedgar2828]

High Output LJ batteries = Large Joules 😉

[@banusbaby]

Like to see the real Japanese Ryobi kyocera .....was the original for the short DeWalt...and has the best case ever

[@banusbaby]

Some of the older Japanese Ryobi drills take the DeWalt xr batts

[@nascorob]

i've had a few panasonic's in the past, no bueno unfortunately

[@user-fx7ic1tw6d]

Макита приятнее Булатный лайк мой👍

[@Tom-sd5ru]

Do a video with scott brown carpentry

[@ToolsAndStuffOFFICIAL]

He lives too far away now.

[@Tom-sd5ru]

@@ToolsAndStuffOFFICIALu need to review makita miter saws that are only availble in japan. Its gonna piss me off but i gotta see them lol

[@richiejames928]

also it seems a shame they are clearly sacrificing power to try and claim a nonsensical accolade of having the shortest tool. then adding loads of unnecessary plastic at the bottom? very weird. Panasonics tool designers have come back from a decade long vacation and forgotten a thing or two.

[@reeley]

sadly we can't get these in the UK.

[@designerprojects8137]

I ordered the body on Ebay from a Japanese seller, works with my old 14v and newer 18v batteries and uk charger

[@PropGuys]

Панасоник сила! 💪

[@sergeisekarev3049]

А толку?

[@PropGuys]

@@sergeisekarev3049 Для нашего европейского - ничего, своих хватает + засилие китайских инструментов( в частности рынок России и СНГ) А для самой Японии и юго-восточной Азии и рядом Панас всегда был и будет, и довольно широкий перечень инструментов вполне профессиональных. Как ни странно такой же Хитачи (Hitachi) присутствовал на нашем рынке, а Panasonic & National нет

[@pekaesy1]

Definitely more reviews from bitches, please. Does the driver have an air flow between the tool and battery? It looks as if there was such at the end of it...

[@shotgunreloader4964]

Noooo ! not another battery

[@gnolls]

FYI, Japan is 100v @ 50 or 60 hz whereas the US and Canada are 120v @ 60 hz for regular outlets utilizing most of the same receptacles. The 110 volt standard is a myth. You can plug in stuff from Japan in a US/Can plug, but you may wear it out due to over voltage.

[@Hand-Driven]

309 on the intro.

[@Hand-Driven]

Okay I’m guessing rings beach Maybe? Kuaotunu?

[@ToolsAndStuffOFFICIAL]

Kuaotunu

[@Hand-Driven]

@@ToolsAndStuffOFFICIALshoulda sung out. You could’ve come around for a barbie and meet the wife and kid. And some ……. Orange juice.

[@ToolsAndStuffOFFICIAL]

@@Hand-Driven Or met up at Luke's Kitchen.

[@Hand-Driven]

@@ToolsAndStuffOFFICIAL nah I don’t like that guy. I shot a toy BB gun at him when he was a kid. He told the cops and I have a common assault charge because of it. I was enrolled to do a blasting course down south once and got knocked back the day before it started because I have a criminal record. Fuck that guy

[@frenchyroastify]

Correction. The Makita right angle impact driver is the shortest. ;)

[@ToolsAndStuffOFFICIAL]

Only counting "standard" shaped impact drivers and well you know it.

[@MsMad555]

1-st!

[@robertrada4783]

Panasonic is nice for taking Instagram shots on the beach alongside your painted toenails, but DeWalt is the only choice for heavy duty professionals.

[@ToolsAndStuffOFFICIAL]

🤣

[@justinvanaulen2478]

DeWalt = Default. Team yellow makes ok stuff, but as a former user, the all day balance of a tool matters to me, and DeWalt doesn’t have that. As far a heavy duty professionals only use DeWalt? Nope.

[@niskytank]

Aww poor wittle dewalt feeling emasculated by a girly instagram tool 😂😂💋💋

[@robertrada4783]

@@justinvanaulen2478Sleep well at night knowing that I’m taking the piss.

[@robertrada4783]

@@niskytank 💅

[@brianf9619]

It looks like the Panasonic is only shorter😮 because it has a slightly shorter Collit , and the DeWalt 850 is Definitely more powerful and has a smaller Overall footprint with its PowerStack Battery .... Just Sayin ... 🤷‍♂️👍🖖

[@A6D6E6]

Good review. Almost as good a view as North Wales .... Almost .....

[@ToolsAndStuffOFFICIAL]

Careful... don't you start me off on a view off... I haven't lost one yet 😊