I Built a 100hp dune bike!

In todays video i completely restyle my banshee swapped kawasaki, I bore and stroke the engine to 500cc's of awesomeness .
Parts for banshee here: bpratv.com/col...
Use code: Vas10 for 10% off
🔥NEW MERCH!!
shopvasilybuil...
Cold cut Chop Saw: aspireiq.go2clo...
CODE: Vasily5 for 5% off
MY WELDERS:
usaweld.com/?r...
*USE CODE: VASILY5% for 5% off your next order*
Top quality abrasives: (Code: Vasily 10)
benchmarkabras...
Follow on Instagram: / vasilybuilds
For all inquires email me vasily1fab[at]gmail.com
Want to contribute financially?
/ vasilycustombuilds
🎵 Music used from www.epidemicso...

[@2strokerides]

2 stokes banned in Europe??? We have street legal 2 strokes here in Europe😂

[@homelessmike2068]

indeed, legal or not well drive them! :p

[@noidontthinksolol]

2strokes banned in europe? ive been riding 2smokers all my life and im from Belgium

[@noidontthinksolol]

almost all our mopeds are 2strokes lol

[@noidontthinksolol]

Americans tend to have some weird ideas about how Europe works in many cases. Then they go on and talk about how they have guns. while i have 7.62 "AsSAuLt rIfLeS" right here in europe lol.

[@2strokerides]

@@noidontthinksolol I'm also from belgium, also a 2 stroke rider :D

[@ButBigger42]

I've been watching a lot of car videos. I'm like it's only 100hp why is he extending the swing arm. And then my brain caught up. Lol. 100hp on a dirtbike is nuts. Can't even keep the front wheel down on my buddys yz450 with 50 some hp.

[@kadehammons1343]

take it to the dunes!

[@hubertkam7647]

in europe most manufactures still make road legal two strokes unlike in the usa and most bikes that younger people buy are two strokes even sport bikes are 2t

[@hubertkam7647]

honda suzuki yamaha still all make road legal two strokes in europe

[@Niels-booij]

2 strokes banned in Europe? 😂 idk where you got that from

[@dukie1616]

You have to admire Vasily the way he goes into builds/mods in such a genuine way with humble confidence too.

[@jpesicka492]

U really need a proper exhaust for this build. I saw a video of the 700cc 2 stroke "megaladon" where HGS built a custom pipe and silencer for it. Maybe they can help.

[@VasilyBuilds]

This will work fine

[@Berm_Blaster]

He just likes having some ragged hillbilly rigged piece of crap

[@jpesicka492]

@@VasilyBuilds word

[@Berm_Blaster]

The pipes just look terrible lol

[@LanceChuculate-se3qp]

Your the only person I would trust to weld a swing arm😂

[@motomule]

Bring that beast to the Oregon Dunes and throw some sand around with me!!!

[@MLAuto69]

Its honestly insane how good your are at this kinda stuff. Im about to be doing a engine swap on my grom and this gave me some motivation!!

[@charliepapa5835]

Is there anything u haven't put a banshee motor in? Awesome build as usual 🔥

[@richardsmiths518]

Looks great, you have such a good attitude towards building. No aftermarket swingarm so you make your own . The bike is incredible

[@hayes831]

cool bike build. can't wait to see it run in the sand dunes.

[@clitzcustom66420]

You should come up to silver lake sand dunes this summer. I'd love to show you around the dunes

[@benmiller5015]

I was actually thinking of asking him which dunes he's gonna ride n if he's heard of silver lake dunes lol crazy that someone else is like dude hit up silver lake lol

[@rickburnout666]

2 smokes aren't banned in the UK, but thankfully, we are still in Europe, but thankfully now out of the EEC ballox and still race & use them on the roads, This would be crazy set up as a supermoto, keep the great videos comin

[@hannoez]

I really like this build. Looks so Nice the 4 inch stretch! I cant wait to hear it rip!

[@Wil_Liam1]

I see no red and no blue loctite.. maybe it'll stay together even though he was yanking on the torque wrench rather than pulling slowly and squarely to get a true torque value... Fingers crossed that he snuck up in small increments to total torque values as it's steel or metal into aluminum blocks/cases...

[@mansikkamies9146]

You would go crazy if you saw me rebuild an engine

[@Mad-Duk_Machine_Werkes]

Exactly the OPPOSITE - NEW Two stroke street bikes were banned in USA in the mid 80's, Dirtbikes about ten or twelve years ago - Europe and Asia still gets all the best Two stroke stuff - everything cool still till this day

[@erichaight9347]

That bikes going to be crazy can't wait to see it

[@Wil_Liam1]

2 smokes aren't banned anywhere in the world except for Califreakinfornia and some gayted communities across America.. 2 smokes are still legal almost everywhere except they have mandated cutting back on any new smokers,instead demanding only 4 strokes or electrics now... Great build and hopefully it'll turn out to be an amazing burner that makes your balls shrink up and crawl inside when wicking that throttle...😂 Kids nowadays have no clue but I think Vasily has caught the mixer bug and embraced it totally... 😊

[@ruvdan]

crazy one man show 💪🏽

[@slimekinglp9194]

I love how Americans think of Europe as one country 🤣🤣🤣 just the cultural differences across Europe should be enough to see that its not

[@bryduhbikeguy]

Awesome build Vasily ! Can you fit a wider tire up front so it doesn't sink in the soft sand,and to give you better control?

[@mossoconnor4417]

You don’t need a wide front, just more throttle

[@tassiejeeper01]

Typically run a "fatty" on sand with is a 90 instead of an 80, (80's are better everywhere else for 90's are better for sand)

[@benscootin4329]

There's something about a 2t parallel twin that gets me excited..

[@kylermayfield8927]

“Only extended it 4 inches” 4 inches is a lot tho I thought

[@josephcervantes6872]

Amazing!

[@andrewhippeli6951]

Bike is looking sick!!

[@nobodyonline8454]

Where did u hear that 2 strokes are illegal?

[@Just-InTimeRepairs]

That bike is going to absolutely rip man, solid build as always.

[@bluestripes1]

love the two stroke builds you should get this thing on a dyno if you can

[@highlightzilla9581]

Ur amazing bro we appreciate everyone of ur videos please keep them coming 🔥🔥🔥🔥❤️❤️

[@stuartsatterwhite6008]

first

[@bobmanzi7712]

great stuff thanks

[@JMKGarage]

This build turned out awesome man, nice work as always 👏

[@jamesmcgee9279]

This is coming together nicely! Looking forward to the full send.

[@cade566]

Every single video that pops up just by the title and pic I have to click and watch every time🤣 this man’s videos are just pure gold no one is doing it like him💪🏻👏🏻

[@larrydavidson3402]

It is looking like a fresh off the showroom floor bike. Great job.

[@inmyopinion6836]

Wow , so , that only set you back 10 or 15 grand , right ? ? ? 😉 0k 100 HP, paddle tires, sand dunes, young buck on the throttle ..... I guess Yamaha must have some SuperDuper bad ass "STOCK" clutches. Good luck with that bro. LOL. 0k, after reviewing I see it was a stock ENGINE /W/ mod. clutches. I couldn't read the poster in 1/16 of a second. Sorry. That has got to be wicked as hell. Can't wait to see you ripping it

[@milspecmachine]

This Beast is Sick Bra !! Very Well Done 👏🏼👍🏼

[@68-72mmALKYstyle]

U said to comment so I am commenting to your post. Kinda a weird request but I’ve been asked to do some wild stuff before but this one takes the cake!! Hope u liked my comments and I will catch ya later bro! If this comment I typed is okay awesome! I’ve forwarded ur vid to another phone and SLAMMED THE LIKE @ the bottom left part of the screen. Bro, if this is all I can do to keep u doing more builds I got ya! I foresure did u a solid and will do it to all vids I c that you make. I can’t wait to see what comes next in the near future…. 10mm DM 611cc banshee motor 😎🏁👍💨💨

[@calholli]

How many CC's are your cool head domes? The banshee I currently have came with 19cc domes, and I think that was too high of compression; for race fuel, and I don't want to buy that sh^t. So I put in 22 or 21cc ( I forget now)-- but it seems to have slightly week compression, so I think I'm going to bump it down one size. What size are yours? (I'm sure it's different anyway, with it being such a bigger bore.

[@jesse1136]

One of the European continent's surprising (and only) advantages over us here in the States.... They're still Braaping new Braaps. KTM, GasGas, amd Husqvarna all have current machines that are 2 stroke. I know all three of those companies are owned by the same parent, I'm just making the point that 2 strokes are prevalent, and a lot more advanced, than most people probably realize.

[@Wil_Liam1]

Word of advice from a 58 ur old builder of almost every type and brand of engine known in America,always use assembly lube on any and every rotating or moving part when assembling and only use the best quality oils you can get for both break in and first short changes to the oil and fluids... Once it's up to operating temps,run it through semi heavy heat runs for up to 15 minutes 3 to 5 times,drain and change oil/fluids&filters, rinse and repeate.. You're fully broken in and ready for wot flogging IF YOU assembled it correctly,used loctite on every screw,bolt,nut/ fastener and torqued properly... Also getting the fuel to air ratio stoichiometry close to 14.5:1ish immediately after fire up..

[@tassiejeeper01]

Europe is single-handedly keeping 2T bikes on the road. Ktm, husky, gas gas, sherco, beta, TM all European all build top notch 300 enduro's

[@dakotapajak96]

Hi

[@matthewsmith6330]

hey vas, I guess 2 strokes can't be completely banned as Gas Gas are made in Spain and KTM is from Austria, those 2023 Gas Gas 500cc 2 strokes are fully fuel injected and hardly smoke

[@sidecarbod1441]

Personally I would have drilled some large holes through the swingarm either side of where the weld was going to be, maybe 2 inches either side, you could have then 'plug welded' that inner pieces of ali to the swing arm in addition to the main welds. You could then grind down the 'plugs' flush with the sides of the swingarm so nobody would even know they were there. Anyway nice engine, I wonder if anyone has fitted one to an RD350 LC? (RZ350 LC).

[@landrelarose745]

Vasily, they're banned every place. There is an exception to this, though. Do you know what this is? KTM, which is a European dirt bike manufacturer from Austria. They continue to build two cycle engines over there. The reason why they're allowed to do this is because those engines are fuel injection, and because they're quite efficient. They additionally pass the stringint emissions requirements they have over there.

[@calholli]

Make sure you bring a LOT of water when riding this at the dunes. Get one of those 3qt camel packs.. It's like a little back pack that holds water. Because riding a dirt bike at the dunes is a WORKOUT; depending on how much you ride. It's not a comfy cruise like it is on a quad or a buggy. you're constantly wrestling the bull by the horns and fighting for balance a lot more often. So just bring a lot of water and keep your energy up. Trust me

[@snakeskinproductions7500]

Great build. Would make a great hill climb bike too. Have a friend up here in New England that races along with his whole family. You should come on up and give it a try?...🤓

[@jasonlewers6396]

My God I'm making two stroke noises just watching these Videos ! I always wanted to build a Frankenstein bike LOL I'm thinking a newer ktm 250 or 300 with a 360 or 380 engine then gear it wide so I can go 90 in the Desert ! If I can find one God dammit

[@caroflage6260]

Great build man! Btw: If you think 2strokes are banned in europe......go visit former east germany😅

[@СергейЕлисеев-ц6р]

Длинный маятник без усилительных накладок? И внутрь стоило запрессовать по куску прямоугольной трубы нагорячую.

[@justincoats7236]

Awesome. What dunes do you ride at? I'm in Utah and we have Little Sahara by Delta Utah and St Anthony, Idaho. It would be fun to see you beat everyone drag racing up Sand Mountain.

[@kylesyx8432]

You ended up looking a little tired! I would have passed out from the stress of not fkn’ up ! Great job! Truly professional job!!

[@lennym1636]

Man I had a hard enough time keeping my KX125 in control, I can't imagine that bike, crazy lol...

[@lesbianalien3435]

Great build. But I would definitely have gone for the maico 700cc single cylinder engine. Its the beast of all 2 strokes

[@VasilyBuilds]

Too much vibration no aftermarket support

[@freeridemoto7133]

the banshee is outdated

[@coloradodirtbike5930]

​@freeridemoto lol 🤡... not many motors can put out over 100 horsepower when it comes to dirt bikes or quads... the banshee has been tested tried and true and good luck finding anything that can touch it.

[@tassiejeeper01]

​@freeridemoto7133 old doesn't mean bad! People still run banshee engines cause they're powerful, smooth (depending on tune) and reliable. If it ain't broke don't fix it

[@lesbianalien3435]

@Vasily Builds still a great build. The only reason I would have gone for the maico is the torque if you are doing hill climbing. I'm not sure of the torque of a tuned banshee. Also the maico engine works well in the sidecars. And they very heavy machines. I still enjoy all the work you put in to your builds

[@backwoodsmotocross3364]

Europe is best known for their 2 strokes and u can order some really sweet smelling IPONE strawberry scented 2 cycle oil from europe also.. ive ordered it over seas many of times..

[@HaileyThiccc]

I literally can’t go 10 minutes on my way to school without hearing or seeing an obnoxiously load 2 stroke moped screaming down the street at 45 km per hour

[@MrStevo440]

I would put a slick on it and send it on the dragstrip .. I would bet very low 10`s or maybe into the 9`s in the quarter mile

[@saschakorner9317]

In Germany 2 Strokes not banned, the old ones are perfectly fine, it is just not allowed to import new 2 Strokes 😉😂

[@HbeipHuuj-ek1jg]

Nice bro I love the sound of the dirt bike 😍 can you make a video of it revving dirtbike please I'm gonna be one of your best friend i will pay for the video ❤️

[@evelynsalazar6057]

WOW that's so amazing with your build you amazing with the best of the best job very well done with it

[@PowerWash2022]

Your welding gap on the swing arm was way to big should only be as wide as a piece of paper for aluminum because aluminum melts very easily so the smaller the gap the better the bond.

[@brodi5367]

My brother in christ.....how could 2 strokes be banned in europe... that is where the majority are made.

[@project4stroke876]

U did a great job as always, But where is the assembly lube for that bottom end?!?!?!?!

[@jamesleonard4607]

Love you channel, but you have to be kidding about Europe, they are the ones keeping the 2stroke alive.

[@iancampbell6002]

Case savers are designed for the chain breaking.. nothing to do with sprocket size.. when the chain breaks it tends to bunch up between sprocket and case and brakes the case

[@Oberhelmanoutdoors]

Plz get a break line guide that goes on the front number plate that's messing with my OCD

[@derekguenette6642]

Good that you’re building your own engine how come you didn’t use any assembly lube on anything not even the Pistons very bad habit

[@calholli]

What CC's are your cool head domes? It should say right on the side of it. (but I guess you already put it together)

[@Kornatzz]

You should have drilled holes in each side of the existing swing arms so you can weld through to the inner tube, making it stronger. Still a great job regardless

[@davidjensen6542]

I was going to say that

[@andrewcarter215]

This is so sick! If you’re near northwest Oklahoma little Sahara is where I ride dunes, would love to connect and can always hold a camera for ya lol!

[@bighomieJ5X]

Vas, thanks for the awesome content, Preciate it 👏🏾👏🏾

[@VasilyBuilds]

You bet

[@tejdz1337]

2 strokes banned in europe lol. we got more 2 strokes in europe than anywhere else in the world.

[@robertchaplow]

How much did one of these builds cost and what was that app you have on your phone when you were installing the clutch?

[@alielabdimarras7965]

Dobro kollega

[@The1withlogic]

That was a proper weld job! So often people just but the two sides together and then grind. No penetration .

[@sjv6598]

I tHoUgHt tWo sTrOkEs wErE bAnNeD iN eUrOpE 😂🤡

[@imtonedeaf1]

I think you find the pipes out the bottom will be lots nicer on your inner legs or you have burt frog legs

[@EmxBrandon]

Have you had any issues with the front tire scrubing the pipes?

[@esbenskovbynielsen1769]

2 strokes banned in europe... ktm is made in Austria witch is in europe😂

[@lolligaggin63]

a banshee swapped, stretched, dune bike. this mans going places.

[@finanmathias59]

they cant make 2 stroke bikes that street legal cuz emissions and what so but the old ones can still ride on the street legaly

[@zoltannemeth9132]

Europen like 2t dirt bikes. I have 10 2t enduro bikes

[@jasonjaeger4042]

Looks like an L chassis KX, loved my '01 KX250L3

[@jarnosaarinen4583]

I'm sure it will go good, BUT 100hp Prove it! I doubt it!

[@budgetbasswilson3866]

That front wheel doesn’t hit the rad on full suspension compression?

[@homelessdrifter9508]

I think we have more street legal 2 strokes in europe than usa has street legal and non street legal 2 strokes on the road

[@bryanspanjer3213]

Yeah, I thought Ronnie Mac was also banned in Europe

[@darkone9572]

If noone else said it yet " Hill Climber " !!!!!! "Beast hill climber

[@dandlugolecki3408]

As a suspension mechanic, that shit makes me hella nervous my guy.

[@asbjrnkvisle5831]

Two stroke engines with carburettors boat engines are banned I think.

[@brianhohmann4176]

So sick 🔥🔥

[@tngtacticalmiata1219]

Love the Banshee engine... Just a cool platform..

[@suamenbolliisi3342]

Why would 2strokes be banned in Europe😂

[@mikehunt3987]

He's thinking of California not Europe. Lol

[@imtonedeaf1]

Boy howdy your not as silly as I thought nice work on the swing arm

[@knuckleheadpro8658]

Your a maniac dude. Flat out bad ass. Get this man a whiskey!

[@derjan236]

In Germany we call this "Stecktuning"