I Built a LEGO Water Park Lazy River!

Рет қаралды 217,411

Build it with Bricks

Күн бұрын

Пікірлер: 82

@icy7851 3 ай бұрын

Anything that has water and lego combined is cool

@robinhood184xD 3 ай бұрын

facts

@vplayz398 2 ай бұрын

True

@LegoAutoTech 2 ай бұрын

7:20, all island and park are moving :)))

@SillyGadda 2 ай бұрын

TRUE

@JessterTheFifth 3 ай бұрын

Awesoke build, but my only concern are the corners inside the lazy river. There are 3 that are large enough for the flow to turn into it's own whirlpool. I saw that the lower half had some texturing, increasing the height and width of it to over the water line would allow more riders and less pile-ups. Every lazy river ive seen/been in never had a corner for that reason.

@BuilditwithBricks 3 ай бұрын

Yeah - 3 little whirlpools did develop - I thought they added to the gentle nature of the ride! If I had more space to build a bigger box (the one in the video is around 1.05m x 1.05m!) then I would definitely have smoothed and curved the corners more to create even better flow! Thanks for watching!

@de-bodgery 2 ай бұрын

Amusing! Now go for speed! 1. Your inlets need to be low to the bottom so they don't pull in surface water near your "riders" and slow them down. 2. Put in water ramps so that water flows up and over things more smoothly. 3. Corners are whirlpools that trap "riders" and slow the water down. 4. Pump outlets are too turbulent. See if you can get the water flow to become more laminer.

@nihilconsortium5518 3 ай бұрын

I would have liked to see the same structure, but with a little difference in level between the start and the finish (with a conveyor belt to raise the tires). And then, putting the water inlets of the pumps towards the outside would surely improve the continuity of the water flow. But these are only details and the video is great!

@BuilditwithBricks 3 ай бұрын

Hi - I have literally made this ride in another video called ‘I built a LEGO Water Park Rapids Ride!’ Take a look and see what you think! Let me know in the comments..

@dravermangaming7404 2 ай бұрын

@@BuilditwithBricksI'm not him but it's cool

@nihilconsortium5518 2 ай бұрын

@@BuilditwithBricks (If I sound weird, it's because I'm using Google Translate) I just watched it and it's even better than I could have imagined! Honestly, what you're doing is really really cool!

@jc7241 3 ай бұрын

Cool but could be much better using slopes and wedges for better water flow! Let’s see V2!!!

@natsunaorathegodofillusion7915 2 ай бұрын

That is one COLD AF lazy river... XD

@markc.7984 2 ай бұрын

Hmm, maybe bring the outlet of each pump around and behind the inlet to remove those "dead zones" between inlet and outlet where the floaters can get stuck, or even go in reverse.

@mitchib1440 3 ай бұрын

One of the things you could do for future water+lego stuff is add some pepper to the water (or some food colouring I guess) to visualise the current a little better :)

@BuilditwithBricks 3 ай бұрын

Hi! Thanks for the comment - I did consider food colouring etc. but then I thought about the effect on the thousands of bricks and decided not to risk it! Maybe I could experiment with a few to see if it stains and incorporate into any future LEGO / Water videos down the line!

@mitchib1440 3 ай бұрын

@@BuilditwithBricks if you use small grains like pepper, it won't do any damage. Best do some small scale testing though, good idea.

@GaryTheGoose884 2 ай бұрын

I would have made at least the island sand coloured and add some more little builds around it like trees or a little hut, but this is still cool either way!

@LegoBoomSG 3 ай бұрын

I love water park and its nice to see a water park made by lego

@BuilditwithBricks 3 ай бұрын

I'm glad you enjoyed it!

@theknexpert 3 ай бұрын

This is super cool! An entire waterpark build next would be amazing...

@BuilditwithBricks 3 ай бұрын

Ah thanks! Maybe at some point in the future…..

@HelloEightDays Ай бұрын

Very goood idea, this looks perfect ! 👏

@BuilditwithBricks Ай бұрын

Glad you like it!

@aslamc9288 3 ай бұрын

Amazing that you can build all this in under 10 minutes. It takes me longer just to do a Battle Pack! (I’m just kidding, I know this isn’t real time)

@BuilditwithBricks 3 ай бұрын

I’m just super efficient!

@bakuza567 Ай бұрын

4:44 it just farted

@Retrobricks 3 ай бұрын

its a hot day in my country and im happy to seee this video, chill vibe

@Chadmiral 3 ай бұрын

I used to work at a waterpark,I can't imagine the lazy river over there having a 7 person capacity 😂

@BuilditwithBricks 3 ай бұрын

Hi, thanks for the comment! Yeah - they can get pretty wall-to-wall, can't they! Especially at the tube pick-up / drop-off points!

@itsmelankysus1234 2 ай бұрын

i used to build Lego marble tracks ONLY THAT.

@Darkhunter190able 2 ай бұрын

A couple notes: Obviously the elephant in the room is that legos are a) not watertight and b) bouyant, but that aside. The widening of the channel in front of the medium pump slows down the water significantly, due to Bernoulli's principle. When the slow moving water there meets the fast moving water at the outlet, this creates a circulation effect known as a hydraulic jump, potentially trapping minifigs. Additionally, the sharp corner splits the flow, exacerbating the issue. Addint the weir after the large pump causes a similar issue with recirculation. As an example, look at the crystal river in Schlitterbahn's 'blastenhoff', in my hometown of new Braunfels - circulation is provided primarily by runoff from the boogie board ride, which pumps, at high velocity, tens of thousands of gallons per minute to create high velocity flows, which then creates a hydraulic jump shortly before it reaches the river. The intakes are typically very large, numerous, and low flow to prevent localized areas of stagnation, as you want all water to reach the treatment plant and pumps several times a day (this is for hygienic reasons). There is actually a lot of science involved, so weeeee! Also, weirs (a dam in which the water is designed to overtop the structure) are among the most dangerous structures in open channel hydraulics, and are therefore typically avoided in waterparks.

@BuilditwithBricks 2 ай бұрын

Hi thanks for the detailed comment! Some great fluid dynamics knowledge there! The level of engineering design that goes into waterpark rides is pretty awesome!

@Darkhunter190able 2 ай бұрын

@@BuilditwithBricks kzbin.info/www/bejne/baXNl2t-jM6Fabssi=IqSFvueTFO2FUr6R Grady at practical engineering has a bunch of videos on open channel hydraulics

@bricklejar 2 ай бұрын

You have must made 8 year old me extremely happy. Well done.

@LegendaryCursor 3 ай бұрын

that one unemployed friend on a tuesday morning:

@SmartLegoSG 3 ай бұрын

Wow, this video is amazing! I learned so much from it. Keep up the great work!

@jonwundersitz1650 2 ай бұрын

So cool - love the build. Where did you get the clear box from?

@BuilditwithBricks 2 ай бұрын

I made the acrylic box! It took as much effort to build that as the LEGO build took!

@Eye-am-Metalchip 3 ай бұрын

This is really cool! I see that the scale of these builds and the still good level of bricksmanship sets this channel apart well 😊

@BuilditwithBricks 3 ай бұрын

Ah thanks for the kind words! Glad you enjoyed it!

@Eye-am-Metalchip 3 ай бұрын

Thanks 😊@@BuilditwithBricks

@EasyMachine 3 ай бұрын

Incredible content as always! Keep up the great work!

@BuilditwithBricks 3 ай бұрын

Thanks! Will do!

@DungĐoànPhương 2 ай бұрын

Amusing! Now go for speed!

@AdamJ03 3 ай бұрын

Awesome!

@BuilditwithBricks 3 ай бұрын

Thanks!

@TheEmeraldWeirdo 2 ай бұрын

I think it might have worked better if there were fewer right-angled turns. If I remember my physics correctly, that sort of thing weakens the current. Maybe add some of those macaroni bricks to those areas?

@BuilditwithBricks 2 ай бұрын

Hi, thanks for the comment! Yep, smooth corners work best but I was dealing with a fixed area in which to build which made the turns pretty tight!. You'll notice under the water the turns are relatively smooth in places which helps water flow. Fluid dynamics is pretty interesting!

@brickaversion 3 ай бұрын

Nice !1

@Dinoslay Күн бұрын

Since the wave wall sped things up why not add one or two more of them elsewhere in the ride to help the floaters move?

@EricInTampaAcoustic 2 ай бұрын

nice!!!!

@gascogne3622 3 ай бұрын

ADD SOME SAND AND PLANTS PLS

@BuilditwithBricks 2 ай бұрын

My last video was all about moving sand with LEGO - after that clean up I wasn't in a hurry to use sand and LEGO together for a while....Thanks for commenting!

@gascogne3622 2 ай бұрын

@@BuilditwithBricks o np, i meant like tan yellow bricks and a lot of lego plants and trees to make the river a lot more vibrant

@gascogne3622 2 ай бұрын

@@BuilditwithBricks OMG and maybe like a bridge or arcway somewhere along the river as well for the minifigs to go under

@dragonskull1447 2 ай бұрын

What motors did you use?

@BuilditwithBricks 2 ай бұрын

A combination - BuWizz motors and LEGO Power Functions / Powered UP!

@YuxiZhang-g8c Ай бұрын

My broken Lego submarine 😂

@PROTOTYPE-hg9gg 12 күн бұрын

Maybe you need some waterfalls becous they get stuck

@mebluewater 2 ай бұрын

Can you mail the larger one and put it in my backyard? Lol

@Deston_lee 7 күн бұрын

Make wave pool

@timpie9346 3 ай бұрын

Apparently just two are enough to block the flow - if they are in the wrong place at the same time.

@BuilditwithBricks 3 ай бұрын

Yes! You are correct - I ran out of room to have it any larger! It was a challenge to get it this big.. With 7 minifigs they never really got that close together however so this became the ‘max capacity’ Thanks for watching!

@timpie9346 3 ай бұрын

@@BuilditwithBricks It was a pleasure to watch!

@Kaffelop 2 ай бұрын

Why fill water on the outside? Was curious to see if it was water right 😮

@SomneStudios 2 ай бұрын

Lego builds aren’t watertight. That’s why the boats have single piece bases.

@rustysshorts 2 ай бұрын

needs water to spray at the Legos

@throwaway-lo4zw 2 ай бұрын

can someone tell me how he does this transition thing at 2:18 where the blocks are being placed? like how does he hide himself from the camera?

@elisecoxhell4139 Ай бұрын

This is called Stop Motion. It's basically a bunch of still images put together. You place one brick, then take a photo. Place a second brick, take a photo, third brick, photo etc. Then you connect all the photos together into a piece of film. It the same principle as old flip books with cartoons, with each picture having a tiny adjustment so when you flip the pages quickly the subject looks like they're moving. Hell, it's the basic principle for all animation!