Tim deserves a dream build of his own. Make it happen Dut.
@KhaiNguyen-wx6sh4 күн бұрын
Tim bro is a big part of this channel!! Nice work tim!!
@UWSHonch4 күн бұрын
Tim killin’ it….he needs a build on the channel he puts in the work
@lex6124 күн бұрын
Agreed
@UWSHonch4 күн бұрын
@@shb9641 precisely…a while ago!time to run it back for Timbro
@vithursan.b4 күн бұрын
@@shb9641 we need another build then
@BjorkensteinvanJurgenheim4 күн бұрын
@@shb9641 We had one build, sure. But what about second builds? And elevensies?
@TheSaw4104 күн бұрын
@@shb9641 🎉😂😂😂
@TeamCupNoodles-nn9og4 күн бұрын
Shout out to Tim for putting in work
@ty.carnes4 күн бұрын
TIMBRO came in clutch for this series! awesome job with the camera and explaining things. pat on the back for him!
@dustiinw4 күн бұрын
He killed it!
@RODZGARAGE4 күн бұрын
Bro tim is just a beast 🔥🔥🔥🔥
@DLivingston4 күн бұрын
The best part about all of these videos is you get to do it with a friend from home. Tim is THE man. LETS GO!
@matthewmohri99904 күн бұрын
Dustin, that last vid was awesome, it was great to see you and Tianna relaxing and experiencing the culture of Iceland. It was good to see Tim get some camera time, he works his ass off to do quality work and it shows. I'm proud of you both for getting your father's dream car up and running, and on the 1st turn start with no problems(well besides the leak but hey it started).
@TreyOates4 күн бұрын
Can’t say how awesome it is to give your Father such a gift from the heart. Most respect buddy!
@JK-tu1xx4 күн бұрын
23:52 How to brick all your electronics on your fresh build almost immediately! You guys got out so lucky that didn't spark and weld immediately and melt down everything, time to get a rubber insulated single ended wrench set for electronics.
@Malar18982 күн бұрын
its not that deep, happened cause they were distracting each other.
@cj410794 күн бұрын
Never seen Tim smile like that, great job guys ❤
@daleschlepp94224 күн бұрын
Let’s goooo! Great work Tim! Super excited for your dad’s first drive and reactions! This is an awesome gift from son to Dad and all car guys would be love to be able to do this for their Dad.
@key2shawn1544 күн бұрын
It’s good to see the project still going
@xacoviex4 күн бұрын
I know it might not be intended but.. Title should have been : ''WE BUILT MY DAD...'' and not ''I BUILT MY DAD...'' give Tim some credit haha.
@lifebidesign4 күн бұрын
Great Video! You guys SENT IT for sure! Thank you for taking us on this adventure Dustin and Tim you guys rock! You can get some custom LED headlights for this build it would look KILLER for SEMA for sure!!!! Of course light up the road much better than the old school factory headlight.
@dustiinw4 күн бұрын
Thanks for watching man!!
@calmakj4 күн бұрын
Much appreciation for Timbro! 👏👏
@MELBehairy4 күн бұрын
Next Vid Idea: Surprising Tim with his dream car please!!!! We all love Tim ❤
@stilife19424 күн бұрын
Tim is a BEAST!! I came to realize, this might be my favorite build you guys have done. I understand how and why you guys are on the Porsche…. So seeing this is amazing! The only race I was taught mattered was the 1/4 mile. So muscle car gang all the way
@rperez101604 күн бұрын
Yeah it’s been long enough Tim deserves his own dream car and build …. Make it happen Dustin 🙏🏽
@dustiinw4 күн бұрын
It’s already in the works 🤙🏼
@hazzyperez66403 күн бұрын
Grandmaster Tim is a mad genius…. You guys are killin it…
@rjauto72153 күн бұрын
tim you are the man brother .dustin so happy for you pops is a lucky man great videos guys
@OutcastPerformance4 күн бұрын
Love the build brother!! Only suggestion I have is double check the cam/ lifter set up in the engine. If it has MDS system swap it for a non MDS cam and lifters, they are known to spin a lifter and wipe out the cam.
@BrokenStream74 күн бұрын
Dustin…. The video production is insane! From the edits to the voiceovers. Not only are you an artist when it comes to cars, your videos are top notch! Keep it up!
@BrokenStream74 күн бұрын
Also Tim man, you’re killing it! Huge credit to him as well! You guys kick ass
@dustiinw3 күн бұрын
Glad you enjoyed it!
@MegaPlatinum34 күн бұрын
Lets go Tim bro!!! You’re always killin it!
@C.J.Bragg_CreatorКүн бұрын
Hard work paying off! Awesome to watch.
@IDv8I4 күн бұрын
Daddy Dut is gunna be cruisin. Great job Tim, oh ya and Dut, lol. Nicely done boys.
@Jon_Jon_Phenomenon4 күн бұрын
Dutt….. you need to link up with your sponsors and make Timbro an appreciation build. That would be so sick.
@andrewfairhall6044 күн бұрын
Been waiting all week for this mate!!
@derekgarcia3336Күн бұрын
TIM IS THE MAN!!!🤘🏼
@Andy45434 күн бұрын
Mr Williams must be a proud father!! 👍🏾👍🏾
@671underground4 күн бұрын
Awesome build series!!!…Timbro is a beast!!!
@takumimiami65504 күн бұрын
Being grateful to our parents is the greatest blessing that life can give you. Everything comes back multiplied by a thousand. That's why my friend Dustin is so successful. Enjoy buddy…
@cd5sircoupe4 күн бұрын
I mentioned this before, I used to deal Cold Case radiators at my old place. They're actually spun off of Pypes Performance Exhausts, cool guys if a bit aggressive trying to push their product over other brands on our site. It's a quality product though, good choice. I hung out with them at one Sema after hours, they had a sick bar setup for their booth with a lot of top shelf liquor. Fun times, I don't even like liquor, definitely a beer guy myself. Nitron shocks? I thought I saw a bunch of QA1 boxes in a previous episode, figured their coilovers were for sure going on. They make a high quality product as well. I worked with them too, everyone I've ever talked to there was super helpful. I'm surprised they didn't go with a B&M or Hurst shifter tbh. I have no clue if they make one that works with that transmission, but it is cool seeing the OE one integrated. I don't care what car it is on, having an x-pipe always sounds better than an h-pipe or a straight pipe. That's why my VQ doesn't sound like an elephant farting into a trumpet, the Stillen system I have. Well worth it compared to Tomei US or ISR or whatever cheap shit most VQ owners use.
@andrewfairhall6044 күн бұрын
As cool as it is starting first go....it's abit of an anticlimax having no issues on start up.😂😂 well done Tim you killed it mate. And dut cool build man ya dads gonna love it.
@RocketGruntMark4 күн бұрын
Lets go Tim!
@willfrank13644 күн бұрын
Tim is a certified bad ass. Where did you find this guy !!! You two are absolutely killing it with this build!!!
@arturorocha30194 күн бұрын
Tim bro is killing it!!
@dustiinw4 күн бұрын
Always!
@Jon64scale4 күн бұрын
Dut sick vid/epic car Challenger is so iconic and the SRT perfect swap 👌 I'd keep it silver but do a T/A Trans Am Racing/Pro street look that'd be epic great work 👍
@Jon64scale4 күн бұрын
And can't wait to see it at SEMA gonna be insane 👍
@DNChxnkz3 күн бұрын
Big Tim!!! Let’s go!!!
@achanctf4 күн бұрын
Awesome team works 🎉, get it in 1st start that’s sick !
@iondat10 сағат бұрын
My favorite build so far!! I'd only dream to be able to do something like this for my dad one day
@ofthenearfuture4 күн бұрын
Congrats on the first start! Such an awesome and special build, can't wait to see it and your dad's reaction at SEMA
@dustiinw4 күн бұрын
Thanks so much!!
@IvanAceves-gt1li2 күн бұрын
I NEED TO SEE END RESULTS ALREADY!!! Give us all the sauce daddy Dut!!!!
@richardpierre79464 күн бұрын
I really wish with the new engine and power you guys would of upgraded the brakes. Do you guys think the stock diff will take the added power and what is the gear ratio of the old diff vs what was for the new trans?
@dustiinw4 күн бұрын
We have a lot of things we are going to do. The most important thing is that it runs and drives into the show.
@matthewmohri99904 күн бұрын
He does make a good point, Dustin.
@Wontawn01014 күн бұрын
Ngl when I saw tim w the wrench being used to tighten the battery bolts how did I know he was gonna accidentally make her spark 😅
@joshchaides4 күн бұрын
Same! I was like “oh no!”
@robertmarcelina39104 күн бұрын
Nice work fellas! Such a smooth build.
@dustiinw4 күн бұрын
Much appreciated!
@joshchaides4 күн бұрын
Tim for the win! Definitely scared me when I saw hit hit both posts of the battery. 😅
@Shankmeyster4 күн бұрын
Tin should get another cheap project car just for this alone. 😍
@keino-paulkeane-dawes9962 күн бұрын
Awesome work Dustin 👏🏾 much respect to Tim 👍🏾
@darksideemtКүн бұрын
Bravo gentlemen!!!! Amazing build and man is your dad going to love that car. My buddy is going to Sema so he is going to get to see it in person and I'm super jealous I can't come to see it and meet you in person.
@nickwalston13224 күн бұрын
Hell yeah. Been waiting for this
@nickwalston13224 күн бұрын
I want to see your dads face when he actually drives it
@baileystine89464 күн бұрын
Dustin i love you and your content but I'll give you my personal feelings on this swap 1 great job 2 it does sound good but..... as a classic muscle lover I think it's a bit sacrilegious to do to such a perfect clean car but with that said I know it's for your dad and I know he will love it your a wonderful son
@junebaka78774 күн бұрын
Sounds so good damn!! Tim looked cooked lol but man you guys did it, great job guys 👏🏼👏🏼👏🏼
@DamnChinn4 күн бұрын
Wish I have a buddy like tim.
@vincenttran6214 күн бұрын
Good job Tim bro!
@BB-pm6xb4 күн бұрын
i love this car, greetings from germany
@kdmoutcast354 күн бұрын
This is the first time I hear someone say SRT the way Dustin did lol 0:15
@kevkrohn3 күн бұрын
Kinda cringe
@davidyarbrough21974 күн бұрын
I have a friend thats truck and his wifes jeep Gladiator will be at Sema. Its with Drop Racks. In fron of the Paris Casino entrance!! Great guy. Hit him up. Tell him Project 7 sent you. 2:50
@emilewihby37353 күн бұрын
Tim Bro needs a surprise build !!!
@TheSaw4104 күн бұрын
TimBro! 🎉🎉🎉🎉
@garrettknight50184 күн бұрын
Can you drop a link to where I can order a Timbro?? My hawkeye needs a LOT of work Hahah what a beautiful car man🤘incredible job guys
@Borp564 күн бұрын
I’d like to see Dut in an American car lol, get a Camaro SS 1LE on track!
@kennethmiller55344 күн бұрын
You should put a new center console in it from a new challenger
@996Revival4 күн бұрын
This is awesome 😊
@FABCasso3 күн бұрын
Grand Master Tim 🙏🏾
@Scott-rr7dy4 күн бұрын
Yyyyeeeaaaaahhhhhhh.
@indy718gts3Күн бұрын
Good work boys!
@djplurboy20004 күн бұрын
Tim you did a good job 👏 👍🏽 keep up the good work... 👍🏽 🎉😊
@blgJohnn4 күн бұрын
timbro did work!!
@Notasheepleandneverwillbe4 күн бұрын
I would reinforce the frame/chassis , I've seen guys do a rebuild on these with a big powerful engine . And then twist the frame on their first pull . I saw one where it twisted it so bad the rear end came out .
@Miles67yusof4 күн бұрын
Lovee it
@rileydeitz7114 күн бұрын
luv the vids dut. been watchih 6 years now, and i will keep watchin
@rileydeitz7114 күн бұрын
and the amount of shirts n sweatshirts ive got of yours, sheesh
@rileydeitz7114 күн бұрын
"well fill urrr up then"
@b16hooligan403 күн бұрын
Timmy's a savage.
@RiveraGarageКүн бұрын
Dustin- “Fuel has arrived” Tim- “ Well filler up then” 😂😂😂😂
@Be5serk3 күн бұрын
Big up Tim
@evoemperor37764 күн бұрын
Putting a newer engine in a classic car is kinda meeh if 340 lacks power just put in the 440 and add efi conversion. You don't want that much power on a death trap you're gonna send your dad to heaven.
@Junior-nh9tqКүн бұрын
Great video series! Your dad is gonna love this car. But question… did you guys wire the Speedo up? In the driving video it wasn’t working
@SpaceBarbarian4 күн бұрын
Ehhhh being a mopar guy it would be way more of a flex to us the og shifter but probably not easy to do
@ItsCyberBugs4 күн бұрын
Tim appreciation video coming soon?!
@TheRussLee3 күн бұрын
Tim is a badass
@Goyito814 күн бұрын
Needs some big boy wheels
@lewischafer33334 күн бұрын
Another epic Content ever 👌
@TerenceY3 күн бұрын
Timbro came in clutch.
@kennym45214 күн бұрын
The stache I like ❤
@refillz5281Күн бұрын
"That felt good" 😂😂😂😂
@Viacam3 күн бұрын
Send Tim to whatever school he hasnt been to help him be a better tech/eng
@BoostedDilly3 күн бұрын
Needs a rallye cluster. Was a factory option.
@welcome2gapplebees9523 күн бұрын
Also they don’t like 2.5” exhaust they come stock with 2.75” and aftermarket is normally 3.0”
@mintberry6014Күн бұрын
Of topic question, is Dustin going to GTR fest in Ennis, TX on November the 15-17?
@ArquelCudia_xAMTCxКүн бұрын
Tim deserves a new car! It's almost Christmas so here's a hint hehehe
@xsspeed4194 күн бұрын
23:52 saw that coming a mile away
@rborges26142 күн бұрын
Great build! Are you rust proofing the cuts/holes that are being made?
@Young_LAI4 күн бұрын
Vote Tim for president 2026👍🤣
@TheSaw4104 күн бұрын
😮.. non existent 2026... how about TIM 2024? Write it in this Tuesday people, we are counting on your vote!
@michaelkillerman4 күн бұрын
I dont know. Old Gs like the feel of the old v8s. The sound, the vibration...
@patak85434 күн бұрын
Heey! First one. :D
@Descatane630794 күн бұрын
Just to let you know that it's not srt but S.R.T. stands for "Street and Racing Technology. so you are supposed to actually spell it out to say it 😅