I Built the QUIETEST Keyboard Again... But The Easier Way!

#keybored I Built the QUIETEST Keyboard Again... But The Easier Way!
For 21 FREE meals with HelloFresh plus free shipping, use code 'KEYBORED21' at bit.ly/3VSdUVw
So, out of all the videos that I have made in a while, the one with the most views is... the quiet keyboard one. Yes... Not the one with all of the mods, or how to improve your keyboard sound. Nope! The one that makes the keyboard sound like nothing... I get it. You can't always use a loud mechanical keyboard everywhere... and some people hate noise. So guess what... I made another video for you guys to make quiet keyboards... but easier than last time. Let's go!
Check out my Instagram and Discord!
/ ig_keybored
/ discord
Links to Products Shown in this Video
KBDFans ODIN V2 Kit (In stock... For Now)
kbdfans.com/r?id=v6i5lg
Drop DCX Camilo (Olivetti) Keycaps
massdrop.7eer.net/P0oDLq
Owlabs Owlstabs
bit.ly/3W4LuHi
Boba U4S Silent Tactile Switches
ringerkeys.com/products/gazze...
Keychron V5 Keyboard
bit.ly/3QCNrto
Keychron Silent K Pro
www.keychron.com/products/key...
Kailh Midnight Pro Switch
amzn.to/3CP583f
Milktooth Switch Tester at Home!
www.milktooth.nu/
KBDFANS - For international Viewers
kbdfans.com/r?id=gj29u8
Shot on Sony A7 III + Sony FE35mm F1.8 and Shure MV7 Dynamic Mic
Sony A7 III
amzn.to/3cGUjma
Sony FE35mm F1.8
amzn.to/3bPHpTu
Shure MV7
amzn.to/2TXIpOO
A Quick Disclaimer - Some links I have provided are affiliate links that generate a small commission to support this channel. It helps me buy more stuff to create content if you shop through those links at no cost to you! Thanks for the support! :)

[@PeteCotton]

I know the Kailh Midnight Pros weren't the most silent of the bunch, but I thought the typing sound from them was really good... With the other switches, you could almost hear a little squeak from the silicone, but the midnights had a lovely soft bottom out.

[@konsolidated]

Bit of a late reply here but I recently picked up a set of these and they really are great.

[@myselph1761]

In my opinion any silent switch that is manufactured by Outemu is by far the best option if you want absolute silence. I have an RK100 that I outfitted with Outemu silent Peach switches and there is more noise made my your fingers hitting the keycaps than the actual volume of the switch.

[@MrDylanMcNasty]

Ditto. I'm a big fan of Outemu's Silent Peach for linear switches and Silent Cream Yellow for tactile switches. Factory pre-lubed on both of these switches are incredibly silent. The tactile Cream Yellow have a slight spring noise, so maybe you can hear that in an absolutely silent room, but I prefer the tactile feeling over linear. I have two boards that I go back and forth on, even though the Silent Peach is probably less noisy, I find myself always reaching for the board with the Silent Cream yellows. If I could just fix my stabilizers.... :D

[@goemon4]

Try the Haimu switches, they are incredibly silent with their unique stem design. Ws switches are made by Haimu as well, super silent switches

[@Vibislo]

😮😮😅

[@underskillednunderpaid]

Maybe I should try them! I've had Outemu's blue switch and they suck really bad. But I feel like most blue switches do lmao

[@KcCake]

Haimu x geon might be louder by a bit but they definitely feel the best

[@bscubed]

I've been using the Boba U4's for over a year now in the build I bring into the office, and I couldn't recommend them more. Perfectly silent and smooth, never had a single complaint from those I work near. Thanks for this awesome video, Scott!

[@Keybored]

:) It's like the perfect medium I believe

[@quikspecv4d]

Same

[@robmarth2226]

Do you think it's worth it to lube the Boba U4S?

[@yaseenislam2269]

Oh man, this was fun to see. Just a few weeks ago I was inspired by your Wind silent video to mod a keychron v6 to make it silent for in office typing. I used lubed/filmed silent cherry reds and used o rings for the tray mount, combining your old keychron mod with the silent switch mod. Turned out way quieter than I thought the kb could get with its lack of gaskets. Thanks for your videos, Scott!!

[@Keybored]

:) glad to hear that!

[@tyrosine87]

It's always cool to hear when someone makes up some of the maybe higher priced features with clever modding. Your build sounds pretty awesome.

[@ed32568]

do you like the feel of it? When I put o-rings on my keeb it just felt too much like membrane for me to justify using them.

[@yaseenislam2269]

@fundthementally I def like the results I'm working with. I don't think i notice any squish from the o rings themselves. And for office typing, it's super quiet even compared to my coworkers membrane kbs. . Primarily, the reason I used o rings was to isolate the steel plate from the standoffs for the mounting hardware. It didn't really affect how hard my bottom out was, more so the sound isolation. I guess technically there is a very small amount of give since the screws are compressing o rings very lightly, but not enough for me to feel a difference when typing. Plus, using silent cherry reds means I get a slight mushy bottom out anyways due to the elastomer dampeners on the stems.

[@mintlata]

These silent switches still use silicone dampeners, which to some can feel mushy and they don't like that. Switches made by Haimu, such as the Heartbeat and Whisper switches, or the WS silent tactile/linear use a new mechanism with a flex cut on the stem and holes in the bottom housing to kill sound. The result is a very nice silent with no mushiness.

[@Keybored]

Yup, the midnight pros are the same as well!

[@tinfoilfox]

@@Keybored The Kalih Midnight Pros? They use a dampening pad in the housing. The Haimu Heartbeat/Whisper switches are different and don't use rubber or silicone pads at all. It's all plastic so less mushy but still silent. They also use the same stem design in the Skyloong Glacier switches as well.

[@mre6659]

I'd love to see you review the Haimu silent switches! I recently got some Haimu heartbeat and put them stock in a board with only one piece of bottom foam, and it's still alot quieter than my fully foamed up board with U4's. And not having that rubber dampening really helps with the feel of the switches, mind-blowing!

[@GENEZ619]

When compared, the keychron silent switches still sounded louder than the other 2 switches, for budget option, I guess the Outemu Silent Lemon or the newer Haimu Whisper could be viable to the build

[@Keybored]

Yeah, the Keychron version is not as quiet as something like the gats or cherry. But even Vs. those it's cheaper, so I guess there is a trade off

[@brendanl.1809]

I've been using Outemu silent grays! Those are nice as well and soo cheap

[@user-qn1zj5bs5p]

but for me the keychron silent is just makes me love it , its not totally muted , and also it still has a little bit sound left off

[@mr6291]

The new style silents out there that use relief cuts in the stem vs. silicone inserts seem really nice. Plus, no mushy feel on bottom-out. I've been meaning to get some.

[@WTFA54]

If you need a more accessible version of the Haimus, the Wuque Studio switches are also made by Haimu and have silent linear and tactile versions!

[@offbrandDavid]

Another option for silent switches are the newly released WS Switches from Wuque Studios! They have silent linear and tactiles that are crazy quiet from what I've heard, and I even order a set of the silent tactiles for my work keyboard.

[@lazybee4267]

Yup, WS silent tactile feel very 👍

[@a_mEmE]

For those that can't find those, try the Skyloong Glaciers/ Epomaker Icebergs (but the silent version ofc, since they use the same type of silencing on the stem, but with varied actuation points and spring weight)

[@gearsgamer7115]

​@@lazybee4267not anywhere close to a hiamu heartbeat linear

[@jw4d]

Those U4s sound pretty dang good! I'm in the middle of making a silent board for work so this video couldn't have come out at a more useful time

[@ivovass195]

Now this is more my preference. The expensive one turned out very nice but it's cost is a bit much. Either way the concept can be applied to any board so great job showing us examples of what's possible, well done

[@Rhino42680]

Great video Scott! I previously owned (and broke) a Keychron K2 and waited months and months thinking of a replacement. When the holidays hit, I saw that the V1 was part of the Black Friday/Cyber Monday sale as were the Keychron silent switches (which I wasn't aware of) and one of their Cherry profile, double-shot PBT keycap sets. I am just blown away by the quality improvement relative to that early Kickstarter K2 and I'm glad you spotted this option for people as well. Great value if you want to get into keyboard/keycaps/silent linears. I don't want to become one of those people with 12 keyboards so at most, I may one day upgrade my switches to my original picks of Silent Alpacas but that's more than half the cost of my entire setup.

[@sukinelson2153]

I think the reason people say membrane is more quiet is because offices are synonymous with that sound so people learned to tune it out in some way. I’ve never seen someone bring a MK to the office yet so when a new sound is introduced people hyperfixate on it even if it isn’t loud. Loved the video!

[@XemnasTM]

For my personal office board I actually use the Odin V2 myself with boba U4 silents lol. The only modding I did to the switches was I spring swapped my bobas to use 2 stage springs for the snappier feel. Great video as always!

[@spinkey4842]

the bonus switches you threw in the end sound much better than the average silent switches but how do they feel compared to the others? i'm not to big on normal silent switches due to the squishy feeling when typing so i shy away from silent switches

[@Cannibeasty]

Just finished my Keychron K4 v2 with lubed+filmed durock dolphins. Also added a bigger battery and poron plate and case foam sheets. I was 100% inspired by your first silent keeb video! I love how quiet my keyboard is.

[@cognition26]

The best silent switches by far are the new Haimu Heartbeat silent linears. They are also sold under different names and look in different regions.

[@sneakytowelsuit]

I haven't used a wide variety of silent switches, but I have both the Haimu Heartbeat and Haimu Whisper (the names are backwards IMO, heartbeat is a linear and whisper is the tactile?). Both are amazing, but I agree the heartbeat is the best. Definitely worth checking out for anyone who wants a silent board. The whispers are quiet as well, but they have a louder top out due to how the silencing is implemented with the relief cut only being on the bottom of the stem. Still good switches, but the heartbeats are better for noise

[@bropez3506]

@@sneakytowelsuit the ingenuity in this design made my jaw drop. Such a clever implementation that I understand is much less mushy than most other silent linears

[@disarmyouwitha]

Nice^^ I started using zilents because I felt like my zealios were a little too loud at my office (no one ever said anything) but after trying them on different boards I think maybe lubed zelios are even quieter / nicer to type on.

[@christmasitv9890]

I call switches like the Midnight Pros, muted switches. Another example would be the Gateron Black Crystel Silent Reds. These switches are just in between silents and normal switches. I love them for their sound profile, truly recommend trying them out.

[@Keybored]

:) It's the perfect gateway switch

[@voronovychda]

I just "built" (assembled) my first keyboard but this video made me extremely impressed with what can really be achieved with readily available products. Thanks!

[@rikun9368]

The first time I was introduced to this channel was when I was searching how to make a silent keyboard and stumbled upon your video on the first silent keyboard build you did. It's really cool and fun on how you build keyboards and insert some science to the vid very creative!

[@Keybored]

Thank you so much! Will continue to see what I can do to help the community!

[@TIB1243S]

@@Keybored Honestly the mushiness wasn't what killed silicone-dampened switches for me - it's the silicone sticking onto the plastic housing (or vice-versa, for the Kailh Midnight Pros) that killed it for me I like to rotate my switches once in a while and as long as you don't use them regularly they all stick to the top when you press, it's so bad I stopped using them The Haimu switches can also be found called "WS Silent Tactile" or "WS Silent Linear" for the more generic versions, I think a genuine better stock silent keyboard you could compare to is against a silenced topre OR you could get that Fold 2000 (nicknamed "Breast Implant") as well, since you literally just press on silicon on those xD

[@zombie512]

I would love to hear your opinion on Haimu switches. I've been using heartbeat linears for a little while now and they are great. Haimu makes silent linears and tactiles for Wuque studios and Geon Works. Keep up the great content.

[@bigleggy]

the membrane keyboard was a jumpscare after how nice all the other boards sounded

[@p.e.r.c.y]

Would be interested to see your thoughts on the Haimu Heatbeats or Whispers that don't use rubber dampeners to silence the switches.

[@brianong7518]

Would be cool if he did one of the more technical explanations for how it works too!

[@Keybored]

That would be an interesting option! I'll have to really look into those!

[@starplatinumrqm]

Super nice video man, thanks and keep it up! Liked the kailh midnights a lot, silent but also has that subtle pop to it, really nice

[@Keybored]

Thank you so much! I appreciate the support!

[@I1S1337]

Your videos got me to take the step into making my first board, and I have to say for my first board It’s come out really well and I’m very pleased, I just need to find some Keycaps in a color way I like

[@daicaghund3587]

Inspiring and the sound comparisons were amazing. Thank you! As I type this on a G815 with GL clicky switches now many months later wonder what I was ever thinking..... Its nice though compared to my work keyboards.

[@drycleanonly]

This is great!! I'm debating between getting the Haimu Whispers, the Wuque Studio Silent Tactiles, and the U4s

[@otek_]

Hello, thanks for the great video! Did you notice any double-clicking on the kailhs? Keypresses registering twice intermittently? My kailh box silent browns had some of those and it really made me nervous to try their other silents. Haven't had this issue with their box white v2's, fwiw!

[@xpinoyxgoodness]

I know this may be a random loaded question to answer in the comments, but how do you go about planning the timeline/flow of your videos. Since you have made so many videos at this point in time does it come naturally or do you still plan out heavily what points you want to make and when in the video.

[@Keybored]

I still have to think about and plan pretty heavily :(

[@xpinoyxgoodness]

@@Keybored gotcha, thats 100% understandable as your videos are amazing and I have started to dabble into making videos and the production of them can be quite the process.

[@myeyesarewaiting]

thanks so much. I'm just starting to put together my first custom keyboard, which will be used in an office environment, so going down the silent route. This video is concise and informative. Thank you very much!

[@shadowasii4492]

I built a color matching mechanisk urskog build with blue macaws. Theyre not as quiet as u4s are, but I kind of see that as a plus as it is quiet enough to be used in lectures while still having a reduced "mush" when bottoming out

[@letoxicm8930]

Been using the Boba U4 for a very long time too. One of the most satisfying tactile yet silent switches I ever use.

[@BraveClam]

This was an excellent ' rebuttal ' video, Scott! Well, rebuttal isn't quite the right word... But excellent revisit on the topic, with more options!

[@anthonyharding4380]

@Keybored As a newbie to this, do I need to purchase anything extra when you say you've used the "silencing pads" as well as the "silicon wire dampeners" ? Does this come with the set of Owlabs Owlstabs? Cheers.

[@chriswheatley3146]

I'm kind of curious how the boba's would sound on the keychron keyboard and vice versa with the odin and keychron keys. In other words between the two builds, is it the switches or the keyboard itself causing the sound difference. Based on the kaihl/boba comparison, I'm thinking its the switches. And yes, I highly recommend the Boba U4's as I'm using them and they are quite silent; while still tactile.

[@WTFA54]

Would also love to see these compared to the most silent topre build possible! The membrane keyboard is so rattley but a well tuned topre just sounds delightful

[@WTFA54]

Ope also highly recommend ttc silent bluish whites for another silent tactile option! It's not as quiet as the U4S, but it's a very satisfying tactility!

[@mojolotz]

I love that the easy Odin build sounded a bit like muffled rainfall. Really nice, But dang... That ultimat silent build crushes the other two in terms of audibility.

[@DaveRessler]

Great video examples! I built my partner a v6 with the Keychron silents (she doesn't like loud keyboards) and everything but the spacebar is pretty dang quiet. Your vid is making me think of swapping hers with U4s though...

[@Keybored]

:) You can also grab some U4s and put them in the larger keys only as well :)

[@imohsoconfused]

i was hoping you'd revisit the quiet keyboard! those frankenswitches was too much for me, so I hoped you'd look at other silent types switches!

[@Keybored]

:) the Boba u4 and bobagums are the best alternative!

[@tca83]

I keep the membrane keyboard provided for work in an office closet! I work on a Keychron Q6 + Durock Dolphin lubed silent switches + Keychron doubleshot PBT cherry MX keycaps! [and the same setup at home just diffent colour keycaps] 😁

[@michaelbakker5720]

When I got my Ducky 1|0 Edition with Roselios silent linear switches, I expected it to be really quiet, but due to the plastic case and no foam in back, it echoed horribly and the switches were pretty scratchy! I resolved this with clear gorilla tape mod (to keep the LEDs shining through) and lubed the switches from the top with 205G0. Huge improvement, but still not as good as these boards!

[@nataliesantana3309]

The Kaihl aren’t as quiet as the Boba but I think I like the sound better. I’m using the Kaihl Silent Pinks and absolutely love everything about them from their feel to their sound.

[@surrealchemist]

I’m curious if you combine the quietest one with some gaskets it would cut down the sound even more. I added gaskets to my keyboard at work which has brown switches in it and it improved things enough that it didn’t drive everyone crazy hearing me type all the time.

[@VioletJewel1729]

THANK you for covering silent switches. Thoughts on silent alpacas? They're my favorite silent switch. My keyboard broke and I got the keychron k2 pro with silent alpacas as a temp standin, and I love it a lot.

[@QoraxAudio]

How much do the keycaps factor into this? Does PBT or ABS make more noise? Are the differences on a case by case basis? Or is it just all the same?

[@shinythings7]

would love to hear how these compare with the haimu heartbeat switches.

[@kraxen72]

a silent keyboard for around 200 is a splitkb kyria, with silver choc switches (linear, about 40g of force) that are lubed and tapemodded, 3dprinted plates and some foam for bottom of chair feet (sliced up) invetween plates and pcb for sound dampening. yes it requires a bit of effort to set up and the kyria is a split keyboard, but ive had it for iver a year and it's really comfy and also super quiet

[@Its-Just-Zip]

I think these could probably use a tape layer on top of the plate to help damp down the sound from the key caps hitting the place (that sounds like it was the loudest part of the keycron option)

[@user-kz9rz8ui1c]

I would love to see a review of the new haimu silents. Or the wuque studio silents, since those use the same mechanism.

[@OGRagehole]

Keychron V1, GK Gamakay Phoenix Linear Switch , and your choice of key caps. I feel is comparable to the highend in this video. I think i will be checking out Boba U4S switches soon though.

[@multimanfail]

i would love to see a silent switch comparison video, there are so few out there, especially fewer that are up to date

[@simplymahbi2251]

Akko's going to release a budget silent switch, can't wait to try those for my first silent build.

[@insu_na]

Ha cool, I built an Odin V1 with Boba U4S for a former friend :D It really is exceptionally quiet. The skin brushing against the keycaps is louder than the switches. I still haven't lubed my MX Zilents tho 😭 I was supposed to get that done months ago

[@capberganza]

I am very new to the hobby and your vids are top notch!! would you go with the Keychron Silent K Pro or the gateron silent?

[@AC-fi8ge]

Amazing video and comparisons - thank you!

[@dizzydizzydizzydizzy]

Check out the haimu heartbeat switches. They use a brand new, innovative mold type with no rubber silencer so they are less mushy, factory lubed (inconsistent but not bad), and pretty cheap!

[@basu715]

Which weight of the U4s did you use? I can’t figure out which one would be best for me.

[@neuber-oliveira]

iam a bit newbie with mechanical keyboards, you used the K Pro just for simplicity right? I could use MX Zilent as well (for keychron)?

[@Legojunkie]

What if you used the NK Cream+ switches with the silicone stem? How does that compare to the rest?

[@Zeraphor]

Exactly my question. Guess we'll find out in R3 of silent keybored.

[@MyOpinyin]

You always cover everything I want to know and then some. you even covered the midnight pros, which ive been thinking of buying to compare with my bobagums! god bless you.

[@Kestriel07]

That Odin board is so clean. Wish I could afford to rock something that 🔥. Great build and great video!

[@utewbd]

I just use a niz plum with o rings and some tape. Not dead silent but it's amazing and feels so good. I just wish I could replace the stabilizers.

[@Cheffamily]

you are right. i just built my first keeb (tray mount, plastic case) with silent switches and it sounds more muted than both Logitech Silent Touch and K380.

[@qwe7410]

What if it is the keychron with the midnight pro? Will it be as quiet as the last demostration?

[@kyoyeou5899]

What I have seen from me running a Iris with Silent Dolphins inside. Is that first of course it's not making no sound. Mine has a nice bass sound (peaking at 76 hz) and the most fun is that depending of the table the sound it different! My favorite is at my parents house where they have a marble table. Feels so good Honestly, can't come back from it!

[@Grochonou]

I was checking the description but i didn't see the link for the stabs wire dampener. So if someone can tell me where i could find it ^^

[@DarkCylon]

I've been looking for a video like this for a little while.

[@B3L13V3R]

The extra step of showing us the midnights was awesome! Thanks for that...

[@bear_the_pear1963]

I am building my dad a keyboard for his office work and I was thinking about mx zilents and then i came across the boba u4s and I am really glad you made this video thnx for the useful vid scott!

[@wil-]

Bro I sent this video link to my friend to make him get into keebs, and he did and threw his membrane off and got a K552 pro by reddragon. Btw I love the V5, it had the sound of a traditional mechanical keeb, and yet still relatively quiet compared to my CIY tester 68 with jwick blacks, also those kailh midnights :> Pls keep making vids and inspire more ppl :)

[@Hionimi]

Honestly I find most silent builds not sounding that great, you hear all the little squeaks and rubbings since there is nothing to drown those sounds out, at least, that's what I assume what is going on... BUT, that Kailh Midnight Pro Silent build is one heck of a different story! That thing sounds good!

[@sorta503]

Do you think the Keychron board would have the same result with the U4S switches? I'm pretty new to all of this and don't know how much the board itself might affect the noise.

[@ethantalbot1811]

I'm going to be trying this experiment out at some point as I've currently got the V5 with boba U4T's in it but am also curious how it'll sound once I can get the silent switches. To directly answer your question, it's possible to closely approach the same sound with the same switches, however different factors such as the shape of the case housing, the plate material, and even the keycaps can alter the sound of a keyboard, so it's difficult to perfectly replicate the sound of one keyboard while using different hardware. Not impossible, but difficult.

[@LifeIsBlue1]

that Odin setup was insane. Love your vids.

[@holly_hacker]

As a programmer, I don't want to hear my keyboard when I'm working (in the office or at home) and I honestly don't think keyboards sound "good". I use silent switches but it'd be great to know some hacks to make it even quieter.

[@gearsgamer7115]

Thing is, I get you but I personally think there is always a non silent keyboard to you that sounds good.

[@maxmouse3]

My man did it again, twice! I was waiting for this one!

[@Keybored]

:) Glad it was helpful! Thanks for the support!

[@MikkoRantalainen]

I want to use TKL ISO layout with hot swap switches, so my keyboard options are currently as follows: (1) GMMK TKL ISO (2) ??? Add Boba U4 switches and PBT keycaps and it should cost around $170. You may need to tune the stabs if you want really silent.

[@orfeous]

I would like to find something similar to my old Keytronic KT-2001 keyboard from back in the days. It's a rubber dome keyboard i know. But the sound and feel when typing was epic. What keyboard or/and switches would be a good starting point? Typing sounds are available on KZbin if you search the model. My goal is to use it on my works desk. Doesn't matter if it's wired or wireless or both. Preferable if it's USB-C if it's wired. Will be connected to my laptop dock. I have looked at keychron keyboards but there are not supermany to choose from since I need Nordic/Swedish keycaps/layout. Preferable would be to have all those number keys aswell on the side but not really required.

[@Thekidisalright]

Can you use the Boba U4 on Keychron Q1? Sorry I am still new to machnical keyboards

[@Exolotyze]

It’s ok Scott I watch your videos to make my keyboards sound good, you still have me :)

[@acetone5026]

I love your channel the science behind keyboards is so interesting

[@Keybored]

Thank you so much! Glad to be of help!

[@jfg28]

I just built a board with Boba U4 silent. It's really a quiet switch. Great for office setting and late night gaming sessions.

[@nemtudom5074]

1:54 As much as im not a fan of non-standard full size layouts, this is really not bad!

[@CookieWookieWooo]

Haimu Whispers are another great silent tactile. If it weren't for the fact that I like RGB, I'd be daily-ing those instead of the U4s I have with the RGB clear tops

[@dgvigil]

I love the “marble-y” or thock sounds. I watch the silent videos because I also love the science behind it all.

[@stuchris]

whats the keyboard in the top left at 9:20? I really like the look of it but want to research it more and dont know the name of it.

[@SWEJmeister]

I liked the Odin build. I'm tempted to try the U4s myself, they seem incredibly silent for a tactile switch.

[@Keybored]

U4S is probably the most silent out of the box Vs. others. Can't go wrong. The one that may be slightly more silent is the linear version, the Bobagum. I still feel the ultimate quiet is the MX Zilent tho... requires so much work and money

[@SWEJmeister]

@@Keybored I'm fully aware of silent linears. I tried the Bobagums previously but went with the Nightcalls instead since they felt better (less squishy and smoother)

[@giacomozema6325]

I work in an office and I use a leopold keyboard that I modified with boba u4 switches and I have by far the most silent keyboard. membrane keyboard clack and most importantly, they creak in a very obnoxious way, especially when people type heavily on them. The only membrane keyboard that is truly quiet is one with topre silent switches.

[@shock1587]

going to check this kailh midnights... they sound fantastic!

[@Green-Man]

If you want another silent budget switch, Akko just released their Haze Pink silent switches at 14 bucks for 45. Another great option in the silent switch space.

[@Keybored]

Thanks for the advice! But I decided not to work with Akko anymore. Not in alignment with their practices as of late :(

[@Green-Man]

@@Keybored I'm out of the loop, what have they done recently?

[@peanutbutterbean1738]

i just got some akko penguin switches, my first silents and my first tactiles, i know they have been out for a bit already but i would love to see you do a build with them, the tactility is super satisfying and they are a LOT more silent than i thought they would be, i have them in my keychron v1 and its a match made in heaven, just feel bad for my jelly pinks, i feel like it will be a while until i take them out again XD

[@liseorte]

Is there a build guide for the Odin V2?

[@pauley_eseprius]

OMG I literally was thinking of this kailh midnight switches last night. I was like, what if they just put the dampeners on the housing instead of the stem

[@theunexpectedua]

Membranes suck bro, can't believe I used them, bro. Thank you for the hard work, bro! ^^ Got a Keychron Q5 for work and productivity, gonna be modding it soon bro.

[@charliefigg3929]

What would you recommend for a keyboard you wanna keep stock under €100

[@zegonix]

is there a difference between the boba u4 and u4s switches?

[@andrijamitic3434]

I wounder how the middle of the road sounds: combining the Boba U4S and the Keychron V5

[@SpeedRcrX007]

My Odin V1 is my board at work. I put Durock shrimps (tactile gang here) and I’m always amused when people told me it is quieter than my colleague’s membrane keyboard. For my next silent build. I’m going to join the Wind X r2 GB (I own r1 and man I like this board) with the southpaw version. I already bought the switches: Haimu Whisper, quite silent without the mushiness of the silicon dampeners, I love them.

[@Keybored]

:) The power of silent switches in mechs!

[@Gabriel-iz4kp]

Can any of these "hacks" also be used for Cherry MX low-profile (Notebook!) Keyboards? Thinking about buying a fantastic notebook, but it has Cherry MX tactile keys and I don't really know yet if they're my thing.

[@gearsgamer7115]

Don't use a lp keyboard. You cant make them silent and if you want silent shove a full size keyboard in the laptop(the screen won't close fully, but that's the trade off for amazing stuff)

[@AquaPeet]

Hahaha okay you got my sub, because I love your humor (stuffing the next piece of chicken into your mouth with an unfinished piece and three fries still sticking out of your mouth)

[@jakoba]

A franken switch of the bobas and midnights? ultimate damp. Also there is really no official silent stabs? yet...?