I can't believe I waited this long to get these...

[@ThicWhips]

LINK TO E92 M3 REBUILD SHEET: tinyurl.com/2h5ktwdw MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com All of my Wheel & Tire Setups: tinyurl.com/yyftysns

[@fungayoyo]

Used these to swap exhaust and do test pipes . Game changer

[@arunmaraj5211]

This M3 is so damn gorgeous. Beautiful build

[@ThicWhips]

Thanks!

[@arndtcraftrace9522]

If you haven't noticed by now, you'll want to pull the car roughly 6-12" farther forward then you would think ( to safely close garage door, with car in air), as the Quickjacks have a small amount of rearward swing, as they articulate. I use blue painters tape ( or paint marker) to mark out the ideal jack location, on garage floor.

[@ThicWhips]

Good tip!

[@alexr.3215]

Might I suggest you take advantage of racedecks sale!!! For a few hundred bucks you’ll transform that floor and the whole look of the garage!

[@ThicWhips]

That's the plan!

[@Sam_0013]

From a fellow QuickJack owner: Welcome, we’ve been expecting you.

[@ThicWhips]

Thanks!

[@davewallace9048]

Getting ready to replace the turbos on my n54.. quick Jack would be the perfect solution!!

[@ag54709]

Really cool to see how far this guy has gone I remember watching when he had an F30 N20

[@ThicWhips]

Thanks man!

[@joebarron3181]

Love my quick jacks, I've had them for a couple years and they've more then paid for themselves. I'm going to have to upgrade though to the 7k one. Got an f10 550i and it's way to heavy for the 5k one compared to my e60 550i i just sold. Either way, they work great. I want an e92 m3 so bad, looks good man lol.

[@ThicWhips]

Thanks man!

[@therrandy2506]

What do you think about using Quick Jacks with a standard X5 ?

[@rossderer6154]

your gonna want the 7000lt. and your probably gonna need the aluminum riser accessories. My 5000lb units I've used a lot and its great for just about everything you need as long as your good doing it on your back.

[@aombarbor]

You are running single driveshaft right?

[@ebsupra]

They're a staple for me now. I can't tell you how many times over these have paid for themselves.

[@Bimbii]

what tires are you using?

[@Nvhfilms]

whats the wheel and tyres specs?? great ride!

[@marc-andremayrand1400]

Dude, you are costing me so much... ahahah now i need quick jacks. I wanted some but now i need some...

[@ThicWhips]

Haha you def need some!

[@rossderer6154]

I've had these for a little over 3 years now. I cant say that I love them. BUT I sure do like them! They would be perfect if: they could go up higher like waist high to be more like a mid scissor lift. Maybe something that would take a modular piece to connect the 2. (I'm not an engineer) They could be used with almost no weight so i can use it as a work bench for scooters and other projects (DO NOT LIFT THESE WITH OUT WEIGHT ON THEM) - ask me how i know.

[@Slowspeed]

GOALS!!!!!!

[@bladejames8208]

Happy 4th bro

[@angrymonkeytv3535]

I Have a set and it makes my life so much easier

[@WhatsyourForte]

Damn, I need these

[@ThicWhips]

Facts

[@Legendz167]

Gaps are the same. 😢

[@ThicWhips]

They are definitely tighter. Tough to tell on camera. But what is really important: the 8mm bolts actually tighten and seat, as they did not before 😉

[@Legendz167]

@@ThicWhips true

[@UsefAfande]

But they make the car heavy 😂

[@dailycardriving4642]

They are quickjacks aka portable lift not like airjacks😎

[@UsefAfande]

@@dailycardriving4642 i was just referring to a TikTok response he posted 😄😆

[@Vision33r]

Not high enough, I've owned these for 5 years and wished they were 1 foot higher off the ground. You can't use a wheel dolly bed underneath because it's not high enough.

[@Chris-hi2ms]

1m clone in the back be like 🦍

[@ThicWhips]

Monster of a car lol

[@mrcarlosasantos]

First 😂