I couldn't wait any longer.... I BUILT THE MOTOR IN MY 2022 HAYABUSA

[@jordan0806]

This is also a good lesson on what you need to do to break in a brand new engine....Run it up and send it... Happy to See Chris strive to advance the Hayabusa Gen 3

[@curtishooks1953]

You did what Suzuki should have done from the factory for the gen 3

[@gsxraiders]

But then it wouldn't be cost effective, wont pass emission, will run like shit on the street, become less reliable, get horrendous gas mileage, and no longer the affordable sport touring bike. Only 1% of busa owners will actually tune their bike for maximum drag/roll race purpose and they each usually do it their own way. It's best for Suzuki to dumb it down and let people (who knows what they're doing) do what they want/need.

[@rissellthomas3254]

I turboed a Busa in 2002. It got up to 347kmh or just over 215 mph real fast

[@FredericD]

My stock busa dous 345kmh

[@larryhouse3776]

@@FredericD fix your speedometer.

[@FredericD]

@@larryhouse3776 clocked with gps 😉

[@blackbutmild1]

I'm surprised that you shouted out HTP Performance. That's what's up!!! 👍🏾

[@simstream3405]

Seems like it’s ready to be a 2022 HayaBOOSTa 💪🏻

[@zeusgod4120]

If i fly my 2022 busa to the states from malaysia, would u be able to build a monster like this one brother ?

[@Da-wooley18]

She’s climbing gears quick now way way faster than the stock motor for sure Still just waiting on the ECU to get cracked so I can send it in to get fixed Badass bike though let’s see it layout some of these roll on boys I know that’s what you made it for lol

[@michaelpagliaro9520]

Hey Chris! Would love to see that new ECU on a stock Busa and dynoed to see what you can pull out of that bad boy.

[@BennyTygohome]

Super good series on the 2022 hayabusa. Binge watched them all. Very awesome and entertaining. Thanks.

[@Ruben_kin]

How heavy is the hayabusa without the covers n the exhaust??

[@SkitPete]

Shane Bro, u gotta shine for this DoubleM freeplug

[@micahbrown8259]

That bike is going to fly 😎 bro .Zuke Nation will be proud

[@michaelapplewhite1923]

I love the gen3 I have the black one and plan to do the red trim on it with sum Stepping I can't wait to see what we get out of the ecu

[@streetrossi937]

Chris I like the airbox mode let's see more phralphie and Pablo on the channel

[@Frank-the-Tank-13]

Thank you for your personality much appreciated.

[@timmysv1k94]

Daaang that thing is awesome!! Wow it looks super strong it just takes off wow I love it

[@jcolberson7186]

Man that's absolutely awesome

[@TEAMWRIGHTEOUS]

Definitely did not disappoint. And if a 4 mil bike can stay cool on the street, then a 3 mil definitely shouldn't be a problem. I'm excited to see how she runs. That's gonna be a BMF'er 💪🔥😎💯

[@RingTuned]

I spy a familiar orange bike

[@TEAMWRIGHTEOUS]

@@RingTuned 👀 2.01😁

[@TEAMWRIGHTEOUS]

Already got me hyped up.... This video is gonna be 🔥🔥🔥

[@MrGsxrme]

I keep seeing people talking about motec kit but I'm not seeing anyone list it. I hope you do manage to sell a ecu swap.

[@Shadowgamer-j7r]

I really like this 2022 HAYABUSA And the contest of the your KZbin channel is very nice the content wont get any other KZbin channels i am really a greate lover of the 2022 hayabusha it is my bream bike

[@powamoto]

Amazing upgrade can't wait to see the 1st ride. Sign me up 👍👍👍👍👍👍great vid so I brought all these thumbs ups

[@larryphillips4164]

Bro, when you’re pouring a full bottle of anything then turn the oil bottom the opposite of how you were pouring it into that busa. It allows air into the bottle so it doesn’t go glub glub glub and slosh everywhere.

[@carlosbrown9768]

boy you done did it again

[@dogdtwo]

I noticed no one has videos of installing delay boxes and or 2 step systems. Think you could do one

[@chaz951]

The Mafia is in the lab again! All we need is a good tire to hook up & that smoke Puig windscreen. The Storm Trooper Busa looks ready to go!!!!

[@TeamMooreMafia]

Yes sir!!

[@MRR-qv3bw]

Curious how streetable this 4mil setup is and if you can make it work! I'm excited to see this monster come together! Its cool to see the build come together quick like this!

[@TeamMooreMafia]

We shall see. I'm gonna put it to the test.

[@wizardmoto]

Dude this this is bonkers, can't wait to see the final numbers👀👀👀

[@lozadazx14]

With all that work no less than 255 + on mr12 to the rear 🔥🔥🔥🔥🔥

[@neurocentricthoughtz1583]

I say itll be near 235

[@RedMoonRising24]

Thanks for sharing the behind the scenes stuff. Congrats on the build. Looking forward to more. When you get that ECU cracked for the masses I’ll be trailering my 2022 Busa to ya ✅ - Amy

[@DakGeorge]

Yep she's a certified ripper

[@fatrat137]

Now that's some proper shop ventilation 💯

[@wizrom3046]

So what is the displacement of the new larger motor?

[@kurtporter4968]

Might be ready to race my zx14 NOW!!!! Good stuff Chris none the less!!!👍👍👍👍

[@SmittyAZ]

Does anyone know about the PAIR block-off plates on the 2022? I'll be going with a full exhaust.

[@enlightenedidiot9552]

I really love your channel. I'm old these days, just a lightly modded VFR800. But I love your badass builds! And why don't I know about Engine Ice? 20+ degrees? Really? Been riding and racing for over 40 years. I'm in Houston, so lower temps are VERY welcome...

[@jeffh278]

The Woodlands here and man the heat is awful

[@enlightenedidiot9552]

@@jeffh278 But it sure is nice right now! My VFR got over 220 degrees last summer, and I hated it. Gonna try that Engine Ice...

[@TeamMooreMafia]

Engine Ice for sure works. It must be ran straight though. Not mixed with water.

[@enlightenedidiot9552]

@@TeamMooreMafia Ok, got it...

[@daveyt4802]

I tried engine ice. Not really needed in my neck of the woods, MN. Not a used in a race bike either.

[@michaelpagliaro9520]

How much hp?

[@idropagearbabye6822]

Been waiting for this one 🤙

[@4allcyclesperformancedynot617]

Gonna be a wild street bike for sure. 💪💪💪💪💪💪💪💪💪💪

[@davy1470]

Did you replace the factory velocity stacks? If so where did you get them from?

[@mikeljackson1275]

I love that color. not a busa fan but something about this year got me thinking bout pulling the trigger on one. but I really want that 2017+ gsxr1k all red like camera girl's bike.

[@cub67]

Y’all should’ve used the stand alone on the stock engine to see how it compares to the gen2 busa.

[@VICTORESPINOSA7]

Keep on keeping on ; "us posted"

[@KoreyByrne]

Can you do a busa with a stroker kit?

[@FOX1RR]

I like it! Moore power with the built engine! Pun intended....👍🤪

[@daveyt4802]

Dang, bored and re-plated cylinders? $$$$$ I assume 4mm OB is the maximum on that block?

[@TeamMooreMafia]

Correct

[@The_Rock2793]

First 😎🔥🔥 always loved a little bike content after diner ! Good content as always ! Hi from canada 🤘

[@TeamMooreMafia]

💪

[@michaelbyrd4004]

I really enjoy your videos dude. Some constructive criticism - you should hire a cameraman with a gimbal to record the shots. That would keep them steadier. I get a little dizzy watching the video sometimes. Otherwise, thanks!

[@DudeMungus]

Yoooo this is so freakin Epic 🥰

[@solfpv2713]

Very nice looking busas!

[@mingtoystratton4793]

She gone be strong, are h gone make her longer or keep her short? Can wait 2 see yall in may14th

[@Jason.cbr1000rr]

Wow motec system full motec exhaust and everything 🤣😃 (also i thought motec died a long time ago didnt know they are still in bizz) lol

[@curtishooks1953]

Chris IF suzuki had make the gen 3 like this i would have purchase one i own a 99 2005 2008 busa and would have the gen 3 BUT not enough HP for the money

[@SmittyAZ]

We're close: 99 copper, 05 LE, '09 silver. We are both OBLIGATED to buy the gen 3!

[@dakotawentworth6676]

Awesome video man!!!

[@dr_krishnaprakash]

Hi Chris can I put slip-on exhaust on my gen 3 busa...other than branded muffler?...would it cause any serious impact on engine??

[@marlonhooi8263]

Is Drag racing classes still available?

[@tomjones3629]

Didn't know VP made oil. Which synthetic VP oil are you using after break in? I know for the street and bigger non billet cams we like something with zinc in it to reduce bucket wear

[@Moto.Bully12]

I’m dying to bring my bike to your shop

[@djwilliams9842]

Nice wonder is the Gixxer 1k getting motor work too?

[@rEaLmErK88]

Speaking of Mike Jones, when you coming to Houston?

[@mickroom7603]

Wouldn't be Cartoon underneath pretty smart?

[@SilverStoneDevelopers]

What swing arm is that ?

[@89heavensent]

Sounds insane....

[@pitchkapizda8355]

Busa genius

[@anthonyfunderburk7871]

Awesome 👍🏾👍🏾👍🏾👍🏾

[@michaelapplewhite1923]

Any ecu news

[@superc910]

For the battle of the brands match round two. This vs a built 14r?

[@multi-taskconstructioncomp5749]

That's awesome bro

[@Popsm0ke]

Oh heck yeah. Are you going to do some roll on races with that badass busa? I'm a kaw fan and I gotta say the new busa in white is about as nice as they get. You should have kept that built engine on ice and humble those roll racers who think they are the bee's knees , feet and wings

[@TeamMooreMafia]

That's the plan!!!

[@Popsm0ke]

@@TeamMooreMafia .....that's good. I'm almost ready to get my 14 dyno tuned. I'm going to get my tires mounted and spark plugs changed. I'm going to run a gallon of gas or two loaded down with seafoam to make sure my injectors are good and clean before it goes on the dyno

[@RAaronD90]

Looking to get a air filter before sending my ecu to you. What filter would you recommend for a 2013 zx6r

[@TeamMooreMafia]

Sprint Use my code MooreMafia5 at Brock's Performance and get 5% off on them

[@RAaronD90]

@@TeamMooreMafia okay and for the tune how would it work with both low power and full power mode

[@RAaronD90]

@@TeamMooreMafia just ordered the P08 filter with your code

[@kevincraig8257]

The shorter maybe adjust the trail do you guys mess with the trail

[@michaelpagliaro9520]

What was the rwhp?

[@ANSWERTHECALLOFJESUSCHRIST]

It's a secret. 🤓

[@ryanliberty2384]

SHOW THE DYNO #S !!!!

[@PedroMcMahon]

should watch the video on 44teeth in the uk 400bhp 2022 hayabusa

[@montha123]

U need to look at that video again , it’s the white tts supercharged gen 2 that is 400 bhp vs a stock 22 busa

[@mintchocolate6768]

Fast bike for sure!!!!

[@nickcortese990]

Curious who built the engine

[@stevencott6666]

Seems to run stout as hell.👍

[@coreynowak5526]

How much power and torque did it make?

[@Gor1llaK1ng3]

What’s the cost of a fully built engine?

[@daveyt4802]

My guess is close to $10 grand. At least $8k.

[@Gor1llaK1ng3]

Yea my thoughts exactly lol

[@rockracing325]

should put that ecu setup on a stock one to see the HP numbers and yes would like to see dyno numbers on that build would be thinkn 250ish

[@1fast10r]

That looks fast af

[@dg8062]

Take that baby roll racing against Evan/TBN. I bet thats your intention, isn't it Chris???

[@kurtfranke1551]

Nice!!

[@AntiPlatitude]

Shorter swingarm looks better IMO

[@lunkydog]

That's liable to void your warranty 🤔😎😎😎

[@TeamMooreMafia]

LOL.... WARANTY GONE!!!

[@kramoilmotolife353]

I wish i can watch one of your race in person mr. Chris...

[@douglasgrosch228]

Need nitrous /turo...now take on roll race ..they got h2s turbos.. will see..

[@petenet58]

Chris do u have the dempled short stacks or tall stacks on ur new built motor??

[@TeamMooreMafia]

short stacks. They are not dimpled though.

[@kendralhunt4296]

Wonder would I be able to get me a built 1507cc motor to go in my 99 gsxr 750 srad for $9,000?

[@MrGsxrme]

Well...... you and brocks fell on your faces with gen3 content

[@athanasioskoultoukis551]

Are you going to let us see the Hp in another video or it is a secret??🙄 I like the look of the shorter swingarm 😉

[@Tony-bs1cx]

Do a 14 you will further ahead

[@joebang1153]

I didn’t think metric bikes needed this many mods, getting like Harley lol!

[@lozadazx14]

Didn’t say anything about the crank but you know how it is at least 2 o 4 mm stroker 😂😂😂😂😂😂

[@-22766]

Like button smashed 👊

[@TeamMooreMafia]

MY MAN!!!

[@daveyt4802]

If you wheelie and come down hard, removing the stock oil plug is probably a good idea.

[@TeamMooreMafia]

For sure!

[@jackspania3409]

@@TeamMooreMafia vp racing synthetic oil or amsoil synthetic for a 50 shot of nitrous in a stock motor 04 gsxr 1000. Any advice?

[@edelferro3562]

Bad mama Gemma

[@steelers19727]

Does that 250.00 include the tweeking of the ECU as well? I have had my ECU done already but if you see an issue with the cooling of power will you change it to be right? If not since you have it what will be the cost to do it right?

[@TeamMooreMafia]

It does NOT. We charge $115 plus to RE Flash our already flashed ecu.

[@steelers19727]

@@TeamMooreMafia it will be in the mail in a few days sir. Thanks for such a fast reply.

[@keithgriffith6002]

Been missing Big Country. What up with that ?

[@TeamMooreMafia]

Race season is about to start back up. He will be back on the channel then. He doesn't work with me. He has his own Waste Oil Business.

[@vincentbinninger7726]

Awesome!!!!