I DONT KNOW IF IT WILL EVER GET FIXED

[@Blake64]

It’s the cv axles popping, from when the suspension drops down

[@owensubjek5090]

This has been like a routine, every night I get in bed than keep refreshing till your video comes out. Lol

[@ryan2546]

Love that!

[@fernplayz6369]

I like that you powder coat the small things. Not only does it look cool and no one does it but also it protects against rust and all.

[@dominikclark8860]

Check to make sure your springs are seated properly in the struts. Have had that problem where the spring isn't set in the cup right and pops or rubs on the metal cup.

[@colinwaldron1295]

I’d take a look at the wheel bearings with the popping and clunking when turning and bumps. My old f150 had the same symptoms and my front driver side wheel bearing ended up blowing apart

[@superdwarf]

Colorado weather right now 45 in the morning 85 in the afternoon. Moderately obnoxious but still manageable.

[@Thunder-iu6ev]

Wow u can really tell on that right quarter panel where you "blended" the paint. Just make sure u debadge and detrim everything when u have it repainted so u don't have peeling issues down the road

[@austinconverse1921]

We did powder coating in highschool and we just had a homade box with metal wrap covering the whole inside and then put heatlamps on the door and put a thermometer in there to keep an eye on temp and maybe some adjustable vents if it gets too hot

[@NORCALPYRO_]

When i rebuilt my front suspension. I did strut assemblies, upper control arms, upper/lower ball joints sway bar links, inner and outer tie rods. As well as brakes and rotors and wheel hub assembly all for around 900$. Installed myself .. thats atleast the minimum of parts you should change if you wanna get that steering right especially with those rims n tires. Pop on turns sounds like bad bushing somewhere or sway bar links maybe

[@1320Official]

Can’t let my man hold anything 😂 he’ll end up powder coating everything

[@huntzt3711]

Lol this guy 😂 “you know what guys I had to take the tires off my rims and you know what, might as well powder coat them as well lmao 😂

[@kerrfu]

When you get to the audio, don't forget to check out Skar Audio, definitely gonna be my next system setup. I've been looking into em and the power output is respectable and perfect for everything you've done already; not to mention the prices and application options are perfect for anything you want, from automotive/two wheeled automotive to marine usage, everyday use and competition. Even if you go small and single sub enclosure you still get a huge bang for your buck, as well as their component setups are killer. I can't stress em enough.

[@MichaelBrown-wv5zu]

Powdercoat oven: we built a 6’x 4’ x 4’ stainless steel box and wrapped it in fiberglass insulation and then took the heating elements out of two old ovens and just mounted the control panels on the outside of the box!

[@SMOKED.BRICK.PRODUCTIONS]

Changed my mind on these things. Look killer

[@taylor2613]

Try to tighten up the upper shock mount bolts I had to do that on my 2012 f150 with a 6inch lift

[@joshuamartin7443]

There’s also a bushing on the silverado lower steering column inside that goes bad. Like 20$ part. You disconnect the shaft inside and knock the bushing out with a screwdriver. Push the new one in and reconnect the shaft

[@brandonoenick7186]

Hey I have a question my steering on my 2016 Jeep Wrangler is really really loose I have a 2.5 inch lift just shock and springs didn’t know what would help tighten that up if you could help that would be great 🙏

[@gspadez]

I did illusion rose gold on my zone lift kit on my 05 6.0 build ... its was an awesome choice ... and as a ode to it I’ll do the same on my oxford ram

[@mackdaisley]

Hey Ryan, double check the torque spec on your sway bar bushing bolts. Bushings are different because they need the right compression and if they are too tight the bushing is useless

[@buffalobmf]

Yea its getting colder. Drove to work at 6am this morning and was 37 and needed all the heated things on 😂 then i drive home at 3 i needed the ac on

[@thatwidecateye]

It’s still to hot here 😂

[@kevinbryant6459]

So trrue it was 46 then 78 in the afternoon , summmer is over😳

[@CG4Ut]

The ABS and service 4x4 lights start going off on these Rams when the wheel bearing is going out. When it does you'll lose a tire and truck depending on speed. I've seen way to many guys have this happen after asking about those warning lights and letting it go.

[@24sflossinon]

Dont know if you have checked it. But check out the bearings in the upper strut mounts.

[@zacharyjordan7339]

I have a 2006 Colorado and the abs light has been on for years nice work I will be looking for that ABS fix vid it’s kind of annoying I want to have that satisfaction of not having any lights 😉

[@anthonytenhoeve5611]

Should deff be able to do round led pods . I did a swap like that on my old dodge and fitted em to look factory and also wired em into factory wiring harness . I used wide beam work lights so they still had same wide angle like factory fogs do .

[@Jake_Jordan66]

My fathers 2018 Larimie 2500 has the abs and traction control lights that comes on and off. It come on and goes off when the truck hits bumps or hits standing water. It’s a common problem with the 4th gen rams. I believe it’s the wheel speed sensor.

[@baileyolds3979]

Ryan your channel gets me so motivated to work hard and learn to do things myself. I look forward to these videos every day and they inspired me to get my own truck. Thank you for “lfting” me up everyday!

[@arevalo8789]

Might be your rear control arms, that’s what was causing my popping noise over bumps as well. All I did was tighten the nuts and that fixed it. 2017 Ram 1500

[@m0nsterenergy99]

Had a popping that I couldn’t find on an old Jeep after rebuilding the front end. Ended up being the shaft on the strut the center nut was loose. Also the lower control arm bolts were loose from the alignment shop. Hope it helps.

[@johnbeyer7100]

The Tahoe doesn’t even look lifted

[@Jerms995]

So your saying Tahoe’s don’t look different when they’re lifted?

[@billjones5098]

For exhaust, true duals with just about any muffler would sound absolutely amazing. Straight pipes would be the best sounding but they’re probably a little too loud for what you’re wanting that way.

[@BrandonGoodine]

It’s your wheel bearings bro! My Silverado done the same thing and that’s why your abs light is on.

[@jeremyrooks6911]

If you have spacers on your front struts, pull one top nut off at a time and see if the stud is sitting on the edge of the hole. It will cause a pop sound also. Just reposition the strut so the studs are close to center and tighten good

[@traviseaton2231]

Love the videos, your making me want to get back into painting cars and doing powder coating on the side. I have an 03 F250 6.0 daily driver I’m trying to get time to redo at some point. Kids get all my spare time for now but they are getting more into the car scene. I can’t wait to have them both out there with me!! Keep the videos coming!!

[@SR5JOHN]

Don’t forget your rear sway bar end links. Those are maxed out now as well.

[@susanredington4601]

Steering stable liners and traction bars will do wonders.

[@JerryandJack]

Get longer cv axles for the front . Front Popping will be solved . Good luck

[@JDR1661]

I ordered my hoodie this past Sunday! Can’t wait for the cold time cause those green one looks amazing

[@jeremywashington4889]

On this channel I've heard rap, bluegrass, country, pop, and techno. Sometimes in the same video. This man's playlist is crazy 😂😂😂.

[@dominicksorise5660]

Industrial vertical bread oven you can get them in gas or electric pricey look for a used one.

[@ethanlarrea7258]

hey ryan i just order my own 14 wides because i saw how god damn good they look on taho i’m running 35x14 tire and wheel 24x12 with -44 thanks for inspiration

[@tbss_vince2191]

Thats a sign of hubs ... the abs/stability trac ... my rwd trailblazer ss did it ... my silverado 1500 4x4 did it ...

[@kovemakesbeats7545]

get the Flowmaster American Thunder Exhaust, or if you like crazy loud without going straight piped, Outlaw series also from Flowwmaster

[@zachf1951]

Steering shaft bearing. A lot of people don’t even know about it. I did the same wild goose chase on my truck and that ended up fixing it.

[@jimcross1061]

Rust belt did a video on it.

[@Dirtydorrito365]

I owned a 2003 SS Silverado years ago. My torsion bar bushings we’re toast. Bumps and speed bumps I had a massive clunk under my feet. Something to look at.

[@281skunk]

Try upgrading the stabilizer shock. If you have one.

[@PoisonSpyder038]

I would double check your struts make sure the coil is seated properly and all the bolts are tight that might be where your popping sound is coming from, just my 2 cents 🤣

[@chriswyattpandemic_silvera5088]

Ryan, you’re the guy that got me into doing this powdering. Did my whole kit myself with the same setup you have except I did buy a HF blast cabinet and I built an oven. If you want to check out my ig @pandemic_silverado there are pics on there or on fb @pandemic_silverado for even more pics. Bought the cabinet at Sam’s, insulated outside with rockwool and covered with plywood. A simple smoker vent from Amazon and propane top hat for heat. The top hat isn’t the best option, use a torpedo with digital temp controller. There are quite a few KZbin videos on how to set up the torpedo heater. Not huge but big enough to do everything you’re wanting to do. I did crossmembers,leaf springs, sway bar, compression struts and those big honkin’ spindles in it. And best part, the thing is on rollers! Feel free to dm me any questions. I know you’re all about DIY to save $. I decided to tackle my build completely myself & my Son from watching your channel. I’m in Fayetteville,OH so yeah...Go Bucks!

[@tylerperlenfein]

Still not fully sold on the tailights, but the rest of the tahoe looks absolutely killer.

[@lifewithcourtland7943]

I wanna see some wheel lights on this thing

[@joshbotello4792]

It’s a wheel speed sensor on the front for your ram. Happens on mine like once every 3 months

[@kadenmoreland7055]

You are why I wanna get into powdercoating right now im going to school for collision repair where would be the best place to get my powdercoating needs?

[@Matthewdennis1]

Just had the same issue with my truck, check the steering gear box in the rack

[@Ls_swap211]

That rack is normal movement I thought same thing but it moves a lot If your getting poping on bumps in the road then you need to go over your shock tower bolts and the bottom buschings on the shock I bought bilstiens 5100 10-12” adjustable and the bottom busching was shot after a few months Went out and bought some cheap mcgaughy 7-9” and set em at 9” with 2” level spacer under the bottom and the poping went away lol

[@levipenn8596]

It looks like it’s pretty low on brake fluid. Might want to possibly check into that. Love the vids hope you the best.

[@lizzholm2415]

Just off the top part of the oven add another layer and weld the top back on

[@damienfight1247]

Hey I have a 2015 dodge and I had the same problems with the dash lights it’s your 4 wheel drive shifter linkage coming loose because it’s made of plastic

[@thalllifts]

Check your abs or speed sensor wire on the front end. It’s probably cut in half and that’s why those codes r there

[@JadenBishop22]

To fix some of the play in the steering pop off the top plastic piece above/behind your steering wheel and you’ll see two T25 (I think) bolts and you’ll have to turn the steering wheel to get to one. Snug those up good and you’ll be surprised at how much it’ll tighten things up as far as your popping issue it sounds like a cv axle to me

[@JadenBishop22]

kzbin.info/www/bejne/hWq7dH1jeJpsmpY

[@apprentaapprenta7682]

It’s common on mopar products for the wheel speed sensors to fail, and it causes the abs light, and traction control light to come on, sometimes if you don’t fix it your vehicle will go into limp mode. The reason I know this is because I do work for a dodge dealer and see it the wheel speed sensors fail on V6 chargers/challengers and excessively lifted trucks and keeps

[@ryan2546]

Thank you!! Will look at it!

[@firestancegang132]

CV axles and tie rod ends or pitman arm and idler arm is toast. And use moog parts. Also check wheeling bearings and hub

[@Lawson4450fire]

Make sure you replace the plastic bushing in the steering wheel as well since you will have it apart easier to do it now. It will also take a little persuasion and patience, ask me how I know lol

[@laurenjames3440]

My truck did the same thing and I still can’t figure out what makes the little noise but I found out my strut shock was a little loose. If you still have noise after your rack fix that might be it.

[@devinlantz3239]

Okay new to powder coating but could you get overspray on the tahoe?

[@darrenlee1765]

Are the springs popping off the shock/strut?

[@lunajohn83]

So can you just about powder coat anything except plastic? steel, aluminum, cast iron etc...and do you have to sand blast orginal paint off if no rust on new truck parts a year old?

[@willnaismith841]

I’m pretty sure that the Taho engine bay can fit a Cummins Diesel so if the engine ever blows up you should definitely drop one in.

[@jonathanecker1119]

I have a 2003 dodge 2500 and have to change wheel senor every other year. For me wheel light comes on i loose cruise. I've tried to give as much room for turning as possible. Its a ram thing never on any my lifted chevys.

[@TheMadPumpkinKing]

Hey question brotha, I have the same sand blaster from harbor freight and got it from my dad, didn't explain how to use it, couldn't find videos i assume what is wrong is needing a bigger air compressor? If you can give some info on it, would greatly appreciate it!! OR do I need to fill it up like A LOT ?

[@irishawn5856]

Since you started powder coating some parts now you will have to do everything! LOL.

[@burke_brothers]

Have you considered doing a starlight headliner in the Tahoe? It would be cool to see that in such a large vehicle.

[@billyokley5470]

You need a blasting cabinet for things like that unless you like the sand mess all over your yard

[@busarob7559]

Have you considered getting a topside creeper?

[@jeremyrooks6911]

The problem with the shafts aren't play up and down. Usually its in and out which u wouldn't think but is common

[@brandispencer9435]

Put some custom speaker pods in the door panels

[@TacoBrad]

Waiting to find out what the popping noise is. My 93 Yukon has been doing the same thing for years. No wheels have fallen off yet sooo yeah

[@davidh7920]

What clear do you use on the powder thank you in advance

[@EllisJ80]

Ryan, my dude... you inspire me... The Tahoe looks so great! I hate I missed seeing you in Daytona. Maybe next year...

[@ROCKEFELLAPRODUCTIONS]

- - - - 0:31 - - Mind sharing where you found the social media animations? They really popped out! I'd love to incorporate that into my channel

[@zachs9817]

You might have to pull a little bit of lift out of the front those CV axles at maximum angle just riding down the road

[@jeremyleverette6750]

They actually make a round led pod for that Tahoe that is a direct fit an plugs into factory harness

[@courtneypickett7257]

I have a ford ranger with 32x11.50x15s and I have a bad shake when I get up to 65 is it my tire out of balance?

[@Frinxh]

Think the tires need to be balanced again? Didn’t you say the weight fell off and you just stuck em back on close enough? Maybe a solution to the shaking

[@philippschubert7035]

This car looks awesome! Love it. But it need an loud exhaust!!!

[@nsubira]

Steering stabilizer bar dude I’m trying to get on for my 99 Durango probably try the one for 1500 or Dakota for Durango seems not made for it feel-me where I’m at

[@TheMadPumpkinKing]

Also redo the suspension 100% lol that looks killer man!!😍

[@mattward330]

Should go to 1A auto and order all that stuff. Can normally get packag deals pretty cheap.

[@tyrus222]

Would you happen to have a lift kit parts list for a chevy express van 7" to 8" lift kit. The only kit I can find is by weldtech and it is expensive.

[@ddub9110]

Wheel bearings. As soon as I lifted my same year Silverado plus with the offset wheels it’s the wheel bearings man.

[@nickrpg3881]

Wheel hubs? My guess, especially since it pops when u hit bumps

[@grantmeyer03]

Instead of a powder coating oven what about a kiln for baking clay pottery it's bigger than an oven but you could probably get a used one from a college or school.

[@lsg_mk7r352]

Doesn't Zone use the same drop cross members and same knuckles on the 4 and 6 inch lift, All thats different in the strut top lift spacer ?

[@lsg_mk7r352]

is the strut top lift spacer*

[@jorgeamparan9742]

what if you night shade the fog lights and stick led replacement bulbs

[@drewdravis4348]

Still wating on that custom sound system u should make your own box and paint the plastic trim pieces the same as the tahoe

[@blackedoutbandit]

Where did u get that powder coat gun

[@badasschevy82]

Hub bearings are bad they will cause the ABS sensor to trip while you drive. Jack it up then shack the wheel from side to side. Any looseness will tell you if they are are bad and like I say will trip your ABS sensor while rolling down the road

[@thatbaggedboostedsrt]

I am having this same issue with my 2003 Avalanche that's lifted 7". It is the same thing. It's only when hitting a bump and seems to be coming from the driver-side.

[@ryan2546]

CV AXLES! new video goin live tonight you’ll see!!

[@power9529]

That red color is fire 🔥

[@michaelparker9886]

So do you cook a lot bc id never bake powder coat in a oven I eat food out of but it looks sick

[@gaelca1111]

I had the same problem on my 2012 gmc sierra and it turned out to be the front differential bearing. I left it like that for soo long that the differential broke. I had to get a used front diff and new bearings and the problem was fixed. The bearing is only $20 so replace it before you have to spend $350 on a used diff.

[@bradcarroll5265]

I’d say abs sensor on the Ram. My Jeep jk that before and the rams are pretty similar as far as suspension and everything go.