I GOT BAD NEWS FOR THE JON BOAT!!

We finally got good enough weather to take out the jon boat to bass boat conversion, so i took the jon boat out of the garage and checked the oil, the spark plugs, the lower gear lube, and then put gas in the tank for the first time, went to start up the 8hp mercury motor and then this happened...
Check out these AWESOME videos!
THIS BACKYARD POND IS FULL OF HUGE FISH!! NEW PB! • THIS BACKYARD POND IS ...
"KAREN" FREAKS OUT And THROWS 400 DOLLAR FISHING POLE In WATER!! • FISHING KAREN THROWS M...
JON BOAT TO BASS BOAT FULL BUILD TIMELAPSE!! • JON BOAT TO BASS BOAT ...
JON BOAT TO BASS BOAT FULL BUILD WALK AROUND TOUR!! • JON BOAT TO BASS BOAT ...
USING HUGE 10 INCH WORMS TO CATCH HUGE BASS AT LAKE FORK TEXAS!! (NEW PB) • USING HUGE 10 INCH WOR...
KAYAK Fishing CRAZY Lake Mackenzie!! (AMAZING VIEWS) • KAYAK Fishing CRAZY La...
I BOUGHT The CHEAPEST KAYAK WALMART HAD!! Lifetime Tamarack Angler 100 (Test and Review) NEW PB • I BOUGHT The CHEAPEST ...
Socials:
Instagram: / adamryana
SnapChat: AdamRyanA
Contact me:
Email - [e-mail]
instagram messages - / adamryana
Send me fan mail and baits you want me to use in my videos to
Adam Ryan
P.O. Box 955
Fritch Tx, 79036
These links below are affiliate links!
FISHING GEAR I USE!! okumafishingus...
RODS
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
REELS
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
okumafishingus...
Check out the awesome fishing gear i use here!
www.okumafishingusa.com
www.fishlabtackle.com
www.softsteelusa.com
If you like gaming content then go follow my friend on Twitch, he is the coolest!!
/ reki____
If you read this far down, you are awesome and i love you!!
Comment "Frogs have large pupils" so i know you read this far down lol

[@skool225]

Good Video man! Glad you got the problem figured out!

[@AdamRyanA]

Thank you Skool! 🤙

[@WayneTheBoatGuy]

Dang it would have been much more satisfying to actually find a problem - buat all good!

[@texasreaper3580]

Nice bro you get it out and ready to fish.

[@ginahampton2129]

Nice boat!!

[@AdamRyanA]

Thank you! 🤙

[@ginahampton2129]

@@AdamRyanA you are welcome

[@JDSOutdoors]

That prop nut is supposed to be finger tight so don't tighten it to much.

[@grandtheftundead6634]

If I was him I would loosen it, too much pressure cause extra ware but glad it’s working for ya. When the fins on your impeller start to twist like that, you should replace it. Best of luck this season!

[@AdamRyanA]

Ahh I’ll go loosen it now

[@DiamondsAndLace]

I bet you know every centimeter of that boat lol

[@AdamRyanA]

I do! Lol

[@stevanrose7439]

Still watching the video but if you are that far into your water pump. Change it. And the old one looked like it was bent into the same shape. Those fins are supposed to be plyable not bent back.

[@AdamRyanA]

I got a new one on the way now

[@tristanfourie3742]

Hi

[@AdamRyanA]

Hi

[@lukejovanovich7783]

What are your plans with the shed you bought?

[@joecrawford7377]

Some of the 4 strokes have a thermostat that doesn't let water flow out the hole until it gets to a certain temp.

[@AdamRyanA]

Right but this motor always spit instantly

[@shirleyblock297]

Love your boat Adam

[@AdamRyanA]

Thank you! ❤️

[@Baileybear85]

I love how dude says he's lazy, but built a whole ass bass boat from an empty jon boat.

[@papilloncycles3463]

Adam you are reminding me to check my impeller !

[@AdamRyanA]

You better go check your impeller lol I’m glad I can somewhat help lol

[@papilloncycles3463]

@@AdamRyanA Haha checked my engines, and Doh! my 1958 Evinrude ain't pumping water! So thanks for the heads up reminder!

[@ericlopez4115]

That impeller needs to be replaced it’s actually in bad shape those little fins it has need to be straight when they’re bent like that it needs to be replaced. On the little outlet sometimes it gets clogged you just need to put some air in when it’s turned on, you can use a little pancake compressor to shoot air in the outlet and it’ll start shooting water back out.

[@mdbassin9120]

My older outboard has to heat up before it will pee. The thermostat detects when its time to pee. Engage the prop and I bet it will pee within a minute or 2.

[@AdamRyanA]

Right but this motor usually pees in seconds

[@Richard-cz1vz]

Another awesome video 🤙 can’t wait to see the next one 🤙🤙

[@AdamRyanA]

The next one is awesome!! Just saying lol

[@BuffaloWill]

Great vid, keep cranking!

[@AdamRyanA]

Thank you Will! 🤙

[@bidkid2020]

Your jon boat turned out very good me and my brother are getting ready to start on one like that full overhaul

[@grantskellenger6786]

If you were to sell it I would buy this boat!!

[@ShaneJMcNair]

It's a thing it wasn't anything serious 🍺🎣

[@СергейГалицин-к2ы]

Super! Подари мотор.)

[@dannyhudson5405]

Frogs have large eye's to lol

[@AdamRyanA]

😳 is that allowed?

[@benhightowerv]

I've got like 4 of those gappers laying around. I can never find them before I go and get new plugs and a gapper. But now I've got one in every vehicle, along with an air chuck, and pressure gauge for the tires.

[@AdamRyanA]

They are easy to lose huh? Lol ohh air pressure gauge, didn’t think about that for my boat tool kit

[@benhightowerv]

@@AdamRyanA trailer is a part of the trip, you gotta

[@stevanrose7439]

I’m pretty sure there’s a thermostat on that motor. I have a 9.8 mercury 2006 and it looks just like yours. Also if your motor is out side in the spring be careful that those little dirt dobbers don’t build a nest in your weep hole. They will plug it up tight.

[@AdamRyanA]

Yeah I checked the thermostat too and it looked good and wasn’t the problem, just didn’t film that part

[@jaredbowles4202]

@@AdamRyanA the thermostat does take a minute to open up.

[@stephenweston2973]

Always try and use a tub for water.. Way to many outboard dont like the muffs. And i would definitely change the impeller soon. Not super bad but if ya have time and your in there. Do it. Keep a parts kit for them in garage.

[@ADVlogs-qw5ch]

I’m putting a floor in my boat and I want to know if u have any idea on what to cover the wood with that’s cheap because Ace in Borger wants 8 dollars a foot for carpet and I can’t afford that

[@andylimb]

I was going to mention the impeller but waiting to see the end. Great trouble shooting procedures. Sometime taking things apart and reassembling helps out. Learning your motor is never a bad thing. I’m rebuilding mine as we speak.

[@AdamRyanA]

For sure, I just wish I had more knowledge on outboard motors, but I’m slowly getting there

[@DoubleTFishing]

Great to see that power stick on there!!! It would be perfect for lake Fryer, should be some bass back in the creek in a few weeks. Great job Adam!!

[@Army_Outdoors_88N]

Awesome dude. Great job trouble shooting bro!!! I am definitely learning more and more, each video!!!

[@kevinphallus]

I hauled my boat to the ocean (2 hours away) and it wasn’t peeing when I started it on the trailer. The pee hole was clogged with pollen. Luckily I had some stainless tig wire on board for straightening coon shrimp and that worked to clear out the line and saved our trip. Would have been a long drive home in shame.

[@AdamRyanA]

Yeah that would of sucked after driving 2 hours

[@jaredbowles4202]

Good idea for those spark plug checkers is just tape it into the cowling of motor. I did this for the shear pins for my old motor for prop, it keeps them on hand and you will never forget it if needed.

[@516Spark]

Them motors are known for problems

[@j.r.r.toking]

I glad you got the problem solved. You worked so hard on that boat and deserve to be out on the water.

[@AdamRyanA]

Me too! On the water videos coming soon!

[@coolissimo69]

The motor looks to be in a great condition, and quiet. Despite the issues, I have seen so many rusted etc.