I Gotta New Old Truck! 4x4 Chevy!

For all the 4wd guys I finally Gotta 4x4 on the channel! I went to pick this truck up to do some work on but ended up bringing it home for myself instead!
1994 Chevy c1500 Silverado 4x4 4wd floor shift 350 4l60e aluminum heads small cam headers mudding mud bog bogging bogger straight axle

[@Hogiewan1]

Great to see you posting another one. Congrats on the truck, and I hope it all works out. My mom always said when you’re born poor you’re punished all your life LOL

[@bowtieguy601]

I know that's right lol

[@FLINTmitten810]

Straight up lol. Been a poor boy my whole life. Still had and have run one way or another lol

[@landonwafer65]

"always needing extra length but ain't got it"🤣🤣 I felt that brotha

[@SammyKurts-ku2ht]

Man you really know these old trucks inside and out good wrenching brother !

[@bowtieguy601]

Thanks 👍

[@walthampton6700]

Appreciate the content. Keep it up. Us wrench turning wannabes got somebody to look up to. Thank you and God Bless from NC.

[@gregh61]

Stripped starter bolts are a damn nightmare! Been down that road in my 82 square body

[@92DeathMetal]

Always enjoy seeing new videos you post. Keep up the hard work man.

[@henryarimas3094]

I never follow anyone so ur the only person I follow cuz I like that u work on them old Chevrolet trucks, and ur buddy too, keep up with the work and videos!! I got a 95 cheyenne, 5 speed stick small v8

[@bowtieguy601]

I appreciate that

[@Harry_Dawg.]

Lol. You and I have the same definition of a "clean truck". Bought my 90 Cheyenne and it was 3 different colors. $60 of eBay single stage and now it's a really clean truck! Great video. Staying tuned for more on this rig.

[@flatlanderoutdoors2549]

Can’t wait for this build 👊🏻

[@russbyrd3221]

That's a pretty good looking little truck. Great Video as always!

[@mattmartin103]

Definitely rem this truck! Good to see it again and thanks for vid!

[@Itsoundslikethat]

When you said “sometimes I’m stupid” I felt that

[@trentdawg2832]

I knew sumthin was fishy when that starter bolt had teflon tape on it😂😂😂 wtf were they thinkin’

[@matthewmauk8890]

Nice truck bub

[@SammyKurts-ku2ht]

Clean truck bro !!

[@FLINTmitten810]

Glad to see you back in action on these KZbin streets!

[@Panhandlexclusive]

“Idk idk…. Idk idk” 😂 love it brother keep wrenching on them old chevys

[@dieselapegarage]

Glad you back at it nice truck keep it coming 💪

[@Zack-smith]

Makes me miss my 92 z71 single cab step side I had nbs gmc rims off a 2008 and I switched the grille over to a gmc grille with led pods cut into the grill as fogs and used them with my led headlights and it was like I was driving with the sun on back roads

[@mattfogarty8144]

Wish I was in Alabama I'd weld all the brackets in for you if I was there I've welded pipe in the field before and I like your content id gladly help you out with that if I was there but I'm in ny 😂

[@emmarichard1230]

Thanks for up date on video boy I like feel out my chair when fire came out got ya little bit keep 💯

[@aaadamt964]

Good looking truck man. Id go ahead and crack the windshield now so it fits in. It should be pretty stout on the cheap. I love it.

[@bowtieguy601]

Right on! Lol

[@drewdew6874]

Man you're good with those motors.

[@sergiorosales1689]

Clean asf 👌 💯

[@Born_again7]

That’s a pretty nice looking truck man, congrats

[@5.3garage74]

Hell yeah love those step side 4x4 nice Truck

[@Stevespoken]

Nice take your time great truck

[@89chevyboii19]

Love your videos man glad to see your back posting again

[@bowtieguy601]

Appreciate it!

[@johnboyman2806]

Hell yeah 4x4 burn outs !!! can't wait

[@JaredPinkston-q3l]

That valve cover though omg ocd is kicking in

[@bowtieguy601]

Lol yeah ill make sure it's the right way once I put gaskets n stuff on it

[@danielsmith9500]

Dang lil mam has gotten grow.!

[@justinkorpela7955]

Awesome video

[@craigpeter5871]

great video

[@itseithergonnaworkoritaint7852]

Hey, I haven't forgotten about you and your 400, I looked where I thought those pistons were but they weren't there. I'll keep looking and will let you know if I find them. There's a couple more places to look when I get a chance. If you find something you're not going to hurt my feelings if you don't want to wait. Those heads from the new truck on that 400 would be a fun runner. Flat tops might be to much compression with it though? If you do end up doing that, make sure to drill the steam holes in the heads or you'll run into problems. But you probably already knew that?

[@bowtieguy601]

Sounds good bud I'm still looking at the moment so just let me know if you have any luck. On the steem holes yeah I've drilled a couple sets and let machine shop do one set since they were doing springs at the time too

[@jackperry9369]

Hell yeah red let's go hey keep the hat on buddy you almost blinded all of us lol 😅 😅 Nice truck red

[@bowtieguy601]

Lmao

[@briang4470]

You can buy a kit online that comes with a spacer plate that goes between the block and transmission that has holes for an early(late 50s- mid 60s) 3 bolt style starter. Johnathan W has a video on here about using one of those kits on a block with destroyed starter bolt holes, if you can't bolt a starter on this truck normally it is a good back up option to save this engine if you can't figure anything else out.

[@bowtieguy601]

Thanks for the info I don't think I've heard of that but good to know

[@briang4470]

@@bowtieguy601 no problem, if you need anymore info on that kit the guys KZbin channel is Johnathan W and his video is titled (small block Chevy starter mounting surface broke)

[@Spudderr]

I ran one on my c10 for a long time, danchuk makes it I had to run a 55 car starter a 55 truck starter wouldn’t work for some reason lol

[@RedEyedPatriot]

Keep Grindin Bro.

[@KDBHonda256]

Yello from Ol A LA

[@jasonchapman2812]

Put a starter brace on it it will help saport the starter

[@skatepunk6894]

Summit has a powermaster high torque mini starter for under 150$ it’s a 9100 I’m done using stick starters they to damn heavy for this wore out old dude

[@bowtieguy601]

Yeah I think that's what the one we got for the blazer is but you can also get a starter for a 4.3 and they're alot smaller than the old big heavy starters

[@72gunslinger]

The vortec 5.7s have a small mini starter

[@paulpowell195]

Wats up man like the truck love the content keep it coming bro

[@bowtieguy601]

Appreciate it

[@paulpowell195]

Anytime bro

[@randomb25]

😂😂 internet technicians and mechanics😂😂😂 sad but true

[@CadenP-i8l]

I’ve had problem like this out my tahoe

[@trentdawg2832]

I see that truck has nice heads on it….do you know what kinda heads they are?? Someone dumped a lil cash into that motor

[@bowtieguy601]

They're just some Chinese heads I think 180 or 200cc runners

[@trentdawg2832]

@@bowtieguy601 some of them china heads be pretty good though!!

[@jordanhill3748]

Ain’t nobody got passed red

[@glennmanchester5696]

Bro sometimes I cringe at some of the stuff you do but it's only because I'm older now and have forgotten how many times I did exactly what your doing meaning doing shit two or Three times because I didn't have the money to do any damn thing right the first time hell I still don't it's even worse now lol but it's how I learned well everything I know by doing what your doing keep plugging away at shit but I'll tell you what anyone has a question about a truck or a car especially a Chevy they always come to me and ask what do I do about this or that and I'm not even a mechanic by trade I'm a plumber but I'm always tinkering and people see me working on something and see the motor hanging on the hoist then before long see me driving down the road in it they know it wasn't majic that made it happen and as a ride if it's a Chevy it runs good

[@BoogieBodine]

No one cares about the hairline we’re here for the car shit brother 👌

[@TheDitchPigExperience]

Hell yeah brother! You gonna wheel that thing any once you get her rolling? I'd like to see some Southern off road action! Check out my 4x4 on my channel, let me know what ya think. Keep the content rolling, Love it brother! Cheers from Canada.

[@bowtieguy601]

Oh yeah that's the plan lol

[@OwnbyBoyProductions]

Hell yeah!!

[@pigrond]

backwards as camera messin me up

[@robertanderson8537]

yeah i like it

[@sammylisasmith2104]

Finish it and put it in the mud

[@DependableAutoTruck]

so sad that GM couldn't make a vehicle that the starter fits i wish i a dollar for everyone i hav had to shim

[@bowtieguy601]

You aint lying lol

[@whiteshedrecordings]

Haha 18:00

[@Kelleypaintbody]

I’ll trade my Camaro

[@conrad6639]

For that pos

[@Kelleypaintbody]

I need a truck

[@NookieWagonSS]

Not too shabby man! That'll be a fun truck!