I made a Dice from steel and brass leftovers

Your Support makes these Videos possible! Become my Patron here for supporting my work: patreon.com/misterpatina
My other channels:
Facebook: MisterPatina
Instagram: misterpatina
In this video I made a Dice from steel and brass leftovers :-)
I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-) Thanks for watching!
I made a DICE from steel and brass leftovers
#dice #lathe #makingstuff

[@misterpatina]

It weighs 114gr. (4 ounces; 0,25 pound) 🙂✌️

[@fakebobbyhill296]

A little tip so that you don’t need a reference for the dots on a die. The opposite sides all add up to seven. 1 is opposite 6. 2 is opposite 5, and 3 is opposite 4.

[@Dirk_Mcgurk]

ok, but what is to the left of 1. or right. underneath.

[@hicham1101]

قمة الدقة و الإتقان ، تحية كبيرة لك من المملكة المغربية.

[@fakebobbyhill296]

@@Dirk_Mcgurk Well underneath 1 is 6. The other four sides are 3&4, 2&5. It doesn’t really matter which sides you put them on because the die’s weight will be balanced, and it can face any direction. So if you turn it 90 degrees a different face will be on the left.

[@МаксимМорозов-л6л]

Надеюсь сталь нержавеющая. I hope the steel is stainless.

[@SirWulfrick]

4 more of those would make the loudest game of Yahtzee ever.

[@misterpatina]

Haha, they’d throw sparks while playing 😅

[@nachtdiertje1972]

Beautiful piece of work and craftmanship. At last someone who knows how analog machining works. No DRO or other digital gimmicks, just experience and craftmanship. Great Job.

[@misterpatina]

Thank you so much, I really appreciate! 🙂

[@thedrakestorm8755]

i wish i was properly taught how to use the lathe and mill in my high school shop class, videos like this one would have made great teaching projects.

[@misterpatina]

Thank you so much! I started with 0 experience, learning by doing :-)

[@colinbuck8687]

Watching that pressing adapter slip onto the vise was sooooo satisfying.

[@The_HillPeople]

"sup" LOL Very nice job!

[@misterpatina]

Thanks! 😅

[@ricardocosson1105]

what a beautiful object

[@misterpatina]

Thanks!

[@ricardocosson1105]

you are most welcome :) I wish I could hold it in my hand@@misterpatina

[@katesterner]

very pretty!

[@misterpatina]

Thanks Kate!

[@geraldstamour1312]

Dope AF paperweight, @misterpatina!

[@bps3374]

Ist gut geworden . Gefällt mir . Hab meine Würfel Löcher 5mm Kugelfräser angesenkt in 2,5mm tief .

[@misterpatina]

Dank dir ✌️

[@人妻にしか中だししません]

That's great! He has good taste and clearly proves his high technical ability.

[@misterpatina]

Thank you so much!

[@icealchemist9122]

D20 metal dice. This is the real challenge👍

[@misterpatina]

Challenge accepted 🙂

[@nyernga]

Mister Patina never fails and never lets me down.......therapy for the soul

[@misterpatina]

You’re welcome!

[@manmohansingh1642]

Dice that not rolled. Great work as always. Masterpiece

[@misterpatina]

Thanks!

[@georgeseven465]

so beautiful

[@misterpatina]

Thanks!

[@jerryjohnson4618]

Magnificent Craftsmanship !!!!!!!!!! Two thumbs way Up !!!!!!!

[@imoldgreg13]

gorgeous

[@misterpatina]

Thanks!

[@frankturner9791]

That was so cool to watch I need a mill and a lathe

[@worldscoolestusernam]

You didn’t roll it…why didn’t you roll it!?

[@andrewhooper5645]

RIGHT?!!!

[@Impecable..]

@@andrewhooper5645woah 4 seconds ago

[@madmax82988]

He might sCrAtCh it

[@geraldstamour1312]

It's 4 ounces, @worldscoolestusernam! It's more like a paperweight at this point!

[@NoReverse77]

It won’t roll even, it’s not balanced like normal dice. Just a beautiful,desk piece :)

[@pascaldespinois9722]

Super idée d’usiner un dé en acier et laiton imbriqués. Ce dé est splendide !!! 👍👍👍

[@misterpatina]

Merci! Je suis content que tu l'aimes :-)

[@Alex_science]

Very nice!

[@nayabkhan2563]

Wow nice man good job well done

[@misterpatina]

Thanks!

[@matthewalexander2436]

As a superrealist oil painter, I really do appreciate perfection and attention to the tiniest detail. Your work is exquisite bro. You got quite a pair of hands on you sir. Well, well done... And please keep em comin! ❤💪❤

[@misterpatina]

Thank you so much! I really appreciate the feedback of an expert 🙂

[@Crazyclay78YT]

i dont think ive ever heard exquisite and bro in the same sentence before lmfao

[@bernardjoly7248]

Magnifique réalisation

[@ratroddiesels1981]

that is a beautiful piece of art work suitable for any museum.

[@Pe.Pe.]

Sehr sehr schön

[@misterpatina]

Danke!

[@kingsanta2248]

so smooh and shiny..great job

[@misterpatina]

Thanks!

[@marka.schlueter9918]

Amazing.

[@misterpatina]

Thanks!

[@papabear2149]

Really cool video!

[@misterpatina]

Thanks!

[@Godric_71]

The precision of these machines can not be overstated.

[@RustyDockLight]

The two metals and surface finish are beautiful!

[@misterpatina]

Thanks! Iam glad you like it! 👍

[@JoriDiculous]

Nice and shiny. I really like brass, looks so good when buffed

[@ScrapRushUK]

Simply amazing, you must have the patience of a saint making things like this.

[@joshuaortiz5204]

I love these little items made from steel like the eightball I saw on another channel. They come out looking great.

[@logansellars8377]

I’ll take one. Super cool

[@misterpatina]

Haha, thanks!

[@TheScubaboy56]

So cool!

[@tcjnr82]

That pressing tool is a great idea. I'll be making one of those 😊

[@たくたく-e3l]

美しいダイスですね！鉄と真鍮の組み合わせが見事！

[@CoolAgainRestoration]

I love it 😍 great project Kai 👍

[@misterpatina]

Thanks a lot! Iam glad you enjoyed 🙂

[@claudiaramos3840]

I liked that steel cube, very unique.

[@EmckuuAlexander]

AMAZING!

[@misterpatina]

Thanks!

[@sebastiannielsen]

A suggestion: Fill the dots with something transparent that have the roughly same weight as brass, so the dice become ultra-fair.

[@SuperDavidEF]

Ultra-fair would be a good idea. But it doesn't HAVE to be transparent. Black or red would look good, too!

[@misterpatina]

I will, when I make the d20 dice 😅

[@Galerak1]

Another suggestion would be to pre-drill 4mm thick brass disk blanks with your hole patterns for 1-6. The pre-drilled side of these disks will then be the side that gets pressed into the steel block so the dimples are hidden (it will be an idea to mark them on the blank side so you know which is which). Once you have them all pressed into place drill the 6 side with 1 dimple, the 5 side with 2 dimples, 4 side with 3 dimples and so on. That way each brass disk will have the same 7 dimple's worth of mass removed. A 3mm drill, sharpened at 118° has a tip depth of around 0.9mm, if the dimples are drilled to 1mm that gives 0.1mm for polishing the sides to a high sheen without leaving a step. Hope that makes as much sense to everyone as it does in my head 😂

[@sebastiannielsen]

@@Galerak1 Thats a great idea, even better than filling the dimples with brass-weighting transparent material.

[@Tasarran]

Or not transparent... Filling them with solder would make them silver...?

[@dougieranger]

That is absolutely beautiful.

[@misterpatina]

Thanks!

[@a.p.a.woodmetal3412]

Brilliant work, excellent result 👌👍👍👍

[@misterpatina]

Thanks!

[@Godric_71]

A full set of Dungen & Dragon dice would be awesome.

[@petercozzaglio6070]

I really love the ” PATINA “ of the finished dice

[@vanpenguin22]

I love polished metals as it is but the contrast between the steel and the brass is just stunning. Now i want a pair of those. But with copper inlays.

[@n01celticfan18]

TURNED OUT WELL LUCKY DICE

[@JamesEPaulley-ns1ej]

All I can say is that’s beautiful craftsmanship !!! 👍😎

[@worstworkshop]

Sick! Now make a d20!

[@misterpatina]

Challenge accepted 😅

[@vinceianni4026]

Hello mister Patina beautifully done

[@misterpatina]

Thanks Vince! :-)

[@MRSH1370]

Perfect

[@masby.gaming]

what a beauty of a dice! very satisfying!

[@misterpatina]

Thanks a lot my bronaldo ❤️

[@Giuliano3722]

Complimenti per il lavoro👏

[@ionvasile1533]

Ciulo ciulo ben trabajo👍💪👏👏🤚

[@garymclay9885]

That is so cool. Good job man

[@misterpatina]

Thanks a lot!

[@swenneumann7205]

Respect.Worldclass.

[@misterpatina]

Thanks!

[@mr.e574]

I love and respect that you gave respect and love to "my mechanics/cool again restorations" No one knows it all Nonetheless.. Perfect, amazing work

[@misterpatina]

Respect is the thing 👌

[@mohammedkharem]

Amazing work as always

[@misterpatina]

Thanks!

[@Shugnar]

Impressive!

[@ParsMaker]

Nice work

[@maxim_izhevsk]

Спасибо за работу, отличная игральная кость вышла! 😊

[@misterpatina]

Spasibo!

[@stevenbrown8857]

That is a real object of beauty. I don't have the knowledge or skill to make something like that but I am in awe of those who do.

[@misterpatina]

Thanks, iam glad you like it!

[@moomae1]

That's a piece of art! Well done

[@misterpatina]

Thank you so much!

[@paulinobenito6905]

Great job 👍

[@misterpatina]

Thanks!

[@Danandvikki1]

I love your work!!!

[@misterpatina]

Thanks! 🙂

[@weedwacker1716]

That is pretty cool. Now you need to make one out of brass with steel inserts to have a pair.

[@misterpatina]

What a nice idea! 🫢

[@freshcoastdrifttracks6074]

I was going to suggust inserting copper or steel into the divits before drilling. But this is also cool!

[@mark2tech]

Work of art

[@jamesniess2485]

🤯👍👏👏👏you are amazing the work you do is amazing 👏 👍🇺🇲

[@misterpatina]

Thank you so much!

[@MrNizamusa]

Right tools right people' The result is perfect job,

[@misterpatina]

Thank you so much!

[@васяиванов-я3м2н]

Молодец.

[@RomanZerstoren]

*This is awesome!*

[@misterpatina]

Thanks!

[@Lewellfouch]

Wow beautiful work!

[@misterpatina]

Thanks!

[@mistert2421]

Nice work 👍🏼

[@misterpatina]

Thanks!

[@grumpyone5963]

Awesome job and with great focused shots of everything. Loved it.🇬🇧

[@SethKotta]

Nice! Looking forward to all the other die types

[@kristianmosele1023]

bravissimo

[@jerrylitchfield4111]

Oh man! That dice is beautiful! Much better than any bought in the store. Very well done!

[@misterpatina]

Hey Jerry, thank you so much!

[@jerrylitchfield4111]

You're so welcome!

[@jerrylitchfield4111]

You're so welcome

[@dougidoug]

It is a wonders work of art. You have an amazing talent for creating stuff

[@misterpatina]

Thank you so much!

[@spaceden]

Magnifique 👌

[@fabianrios3021]

Hola amigo. Nunca voy a tener esas maquinas ni tu destreza ni tu conocimiento para hacer lo que haces. Quedo perfecto ese dado. Un placer ver como trabajas Te felicito. Saludos desde Cordoba, Argentina.

[@Chevymacjr]

Amazing as always! Excellent work!

[@CoolIdeasDIY-qv1nz]

Great job, colleague👍👍👍

[@misterpatina]

Thanks buddy!

[@plumtree7973]

Awesome.... love your tools as well ‼️

[@misterpatina]

Thanks! Iam glad you enjoyed!

[@RapNu]

Nice work MP🙂

[@Drankoii]

That's so cool! Amazing.

[@misterpatina]

Thanks!

[@Vickie-Bligh]

Really well done, great filming, Mr. P.

[@misterpatina]

Thanks a lot Vickie! :-)

[@lilianameghesan6293]

Chi sa fare, fa ! Chi non sa fare, guarda e apprezza ! Complimenti 👍👏🤝

[@misterpatina]

Grazie :-)

[@ajipo]

Great job!

[@misterpatina]

Thanks!

[@airwolf1]

magnifique, bravo

[@Dirk_Mcgurk]

wow! looks amazing 👏

[@misterpatina]

Thanks!

[@andrzejporeda7281]

Przepiękne jest to wykonana ta niesamowita kosteczka z mosiądzu i zwykłego metalu pozdrawiam serdecznie 👍👍👍👍

[@misterpatina]

Thanks!

[@franksando635]

Super cool 👍🏆

[@royothebuzz]

Brilliant

[@connavargt6068]

That is awesome! Now please make a D20!

[@misterpatina]

Funny, right in the moment iam searching for inspiration/images of a d20 😅

[@shawnstamp1635]

Super sweet

[@tarts9767]

Well spent 14 min. THANK YOU ! 👍👍👍🙂

[@misterpatina]

Thanks for watching! 🙂

[@dixonqwerty]

Looks amazing!

[@misterpatina]

Thanks!

[@DavidCadena-h1l]

Sweet. Nice demonstrstion of your lathe and milling skills.

[@jon7371]

Love this. I'm wondering what a full set of dice ranging from d-4 to a d-20 for us nerds would look like in this style. If you need a challenge that is.

[@misterpatina]

I could use 2024 for this project 😅

[@bradencutter]

a d20 would be siick. id use it for my magic games