The Off-Road Bread Van Gets HUGE Upgrade!

[@RobbyLayton]

Don’t miss out on the exclusive merch at www.robbylayton.com, where you can gear up with the latest apparel and accessories. Plus, every purchase enters you for a chance to win the iconic 1972 C10 truck giveaway!

[@christiedovale7827]

even I knew that

[@nyraptor]

Hector bring a whole new dynamic to the videos dont ever stop I'm loving it.

[@bradleymadosh911]

I Love it when Demri helps work on stuff. She does a good job. You can tell she likes it and likes to learn everything about Vehicles and how to build them. Such a Beautiful and loving wife you have Robby.

[@jeffomalley100]

Damn Sean's an artist when it comes to metal. It's really impressive.

[@randyhome1544]

Hillbilly schools us on tire repair.

[@remorrey]

Sean---you're the artist! (Could feel your pain when Demri suggested getting a new tank.)😅

[@billb412]

Typical women from the front office. Always wanting something that she has no idea ABOUT, THEN DOESN'T WANT IT ONCE SHE GETS IT. She just has to be involved AND LOOK IMPORTANT.

[@kennethbrown8723]

@@billb412Take it easy Francis!!

[@NAWPS]

Sean and the crew are doing a banging good job,,Thank goodness for Hector for helping and sharing a laugh..

[@joecolosi1795]

Love Hectors exuberance

[@metalmangle]

Viva, Hector! Hillbilly and Hector teaching each other their language is freakin hilarious!

[@MikeLutz-e8p]

MORE HECTOR PLEASE..... HE'S A RIOT😂😊🤣😆

[@Leavon]

Why are you working on the Bread Truck? You should be giving Whiskers some love doncha think?

[@russellgranger6441]

Shawn is an ARTIST!

[@tobiastho9639]

Everybody needs an amazing Owen in the shop!

[@jefftabor595]

Always great to see The Boss. Enjoyed watching Hillbilly and the crew. Expertly watched.

[@dinsdaleseven1627]

Hillbilly = beast.

[@Kevin-ti3rz]

Sean makes an engine cover Art !

[@jameskendrick573]

You go Hector that was funny

[@kevinjohnston1957]

He makes more sense than spill biily.

[@Deadcntr]

In the 1970s I worked in a welding shop. We ran exhaust hose into the fuel tank and welded it. Without oxygen there is no KaBoom!

[@davidlee186]

Sean you are the magic man.... I can see why you kill it at SEMA

[@SteamfanScott]

Know it has been said a bunch, but Sean is a great addition to the team. And Hector is a hoot.

[@franker1111]

Twin sticks your gonna love the way it works. So much more depends and works so much better

[@systemsrenegade9888]

Hector's awesome .

[@johncornell5136]

Hector is the best.

[@leosmith848]

Seriously between Hector, Hillbilly, Shaun and Demri I cant work out who is the best. The whole damned team are funny, hard working interesting and generally awesome, as you Yanks say. And I always like a cameo appearance from Bombi.

[@caseyrenner7024]

he's a cool dude

[@barnett25]

@@leosmith848 And Colton as the glue to make everything work and bring us the footage.

[@TheRyanbohn]

Hi Hector!!! 🤚 😂

[@MastaT_150]

Bombi says “Ahhhh floor food… What you thinks I am some kinda stray peasant? My food needs to be in a bowl, it’s in my contract. Also I’m not gettin chunky, dat’s my fwuffy winter coat!”: 😽

[@marlobreding7402]

17:00 You can weld fuel tanks without washing the fuel first. Inert gasses like CO² or even exhaust gasses will prevent an explosion by lowering AFR (Air Fuel Ratio) well below a combustible mixer. I watched as my friend Tommy welded his 57' Jeep tank.

[@tobyslate13]

Robby you have an Amazing Team!!! The way they all work together and respect you speaks volumes about your Leadership sir.

[@BrianSmart1959]

I think Hector speaks perfect English, he just likes messing with Hillbilly.

[@jarroddraper5140]

He did say that one video

[@Hootman865]

When’s Hillbilly gonna get that Hector understands perfectly

[@mindurbusiness-b3u]

i think thats just work place banter

[@lauriesbella1252]

@@Hootman865 I know, right?

[@jhood758]

Don’t you think if we all know….Hillbilly knows??

[@taylormade710]

The attention to detail that went into the bread van is amazing. It had to be the best looking build

[@bobcats905]

Welding on gas tanks, simply run an exhaust hose into the tank, we do it all the time.

[@davebaker489]

Let me state the obvious... Sean's skills are amazing.

[@davidbreaux5989]

Hector is a good guy. And funny too.

[@robertwise9127]

It's great to see the team getting it done! Thank you all! I hope the bread van delivers!

[@petercornish9903]

But no hot rolls, please. We are still sad about the scrapes from the rocks.

[@andrewjones-productions]

You both should be a double-act! Very droll indeed!

[@HuevoFz]

porfa no desactives subtítulos!!! gracias! abrazo grande!!

[@marcuscoquer5958]

I agree.

[@lisawilson4551]

I love Hector he is such a good sport 🤣🤣🤣he put up with you fools 🤣🤣🤣🤣Love this channel 🤣👍❤️❤️❤️❤️❤️

[@garychaiken808]

Great job guys. Thank you 😊

[@douglaszeeff8052]

If you have to weld on a gas tank you run a hose from a car exhaust into the tank after it has been emptied. Let the exhaust run for about 15 minutes and you can weld with no explosion. No oxygen = no explosion.

[@vancave3539]

When winterizing the alcohol fueled car drain oil and remove valve covers to allow alcohol to evaporate from valve train and prevent rusting.. Learned this from Steve Morris.😊

[@Mr.Unacceptable]

I'm way up notrth in BC and it hasn't even threatened to snow yet. The snow line is way above 3000f.

[@franker1111]

Absolutely beautiful truck

[@wackowacko8931]

The typical "proper" way to weld on any metal gas tank is to fill it up with argon, nitrogen, carbon dioxide or any other noble gas, depending on what you have around. Some people run a hose from a running engine's exhaust into the tank while they weld to prevent explosion. Water can work if you have a decent welding machine, but it tends to cool the weld too much when welding aluminum. A decent weldor can compensate for this, if they need to.

[@EKAdventures51]

Robbie, put Rear steer into this please, would be wonders in the wilderness

[@kittty2005]

you're going to be an awesome Dad Owen.👍

[@dongeiger8393]

I’ve seen filling the gas tank with exhaust gas. Run a hose from the exhaust into to filler and fill the tank with exhaust gas.

[@randalmartin438]

You got to c-25 or Oregon you fill the tank with gas and weld

[@mm3rik]

hi guys , try this next time you need to welds a gas tank , drain it then remove the sender unit ,attach a diesel car /truck exhaust to the filler ,start the engine and leave it running for a hour or more , it will remove all the gas fumes safely and also the heat will remove any remaining gas

[@nothingtoseaheardammit]

Put some anti seize on those belly pan bolts. Those things get stuck and you're using a hole saw to get them out. Don't ask me how I know (H1 rocker panel protection plates)

[@kathysantos2594]

Love watching you guys

[@patmoeller3447]

Mix the blue and the red to make bred for the bread van

[@BringerOfDearth]

16:20 "Hello, Mr. George? How much you pay for the new guy? Twenty bucks? No. Too much money." LOL! 😄

[@bryduhbikeguy]

"No Ka- Boom?...There should be an Earth shattering Ka-Boom.."(Marvin the Martian). That looked so fun that I can't wait to watch you do it again. Next time it'll be the transmission too ;)

[@joelpeterson9227]

I've had fuel tanks welded before not an issue if done properly

[@traveler390ktm5]

You guys really put your heart and soul into your builds. Which leaves me with one teeny question... How will you know if the bread van is really rusting out🤪🤣🤣🤣

[@bernieshort6311]

Hi guys, don't ask me how I know but flushing the gas tank with cold water isn't always enough to make the tank gas free. The best way is to fill the tank with cold water to the absolute top and drain, next fil the gas tank to the absolute top with warm water, as warm as you can get, then empty the tank. That should do it for you. The warm water will vaporise any fuel pockets remaining.

[@MikeY77z28]

Wow!Hillbilly is a human forklift

[@umbraelegios4130]

Big bada Boom. - Fifth Element.

[@jpolish420]

All you have to do is purge it with shielding gas after you rinse it. And BTW, Sean is a god. That console is amazing!

[@MikeBevens]

Everyone need a Hercules Hillbilly in their shop!

[@wm7683]

Bless you

[@brucea822]

These offroad builds (and King Fred) are all awesome! having the fantastic shop you have built and the having the G O A T fabricator in house. there's nothing you cant do.

[@BlueVanDan]

Take a hose from a vehicle exhaust pipe that is running and stick it into the gas tank. Flood the tank with exhaust gas while welding... no go boom!

[@STEEL-IN-UT]

Hose Clampett is Jed Clampett's grandson 😂🤣

[@ChrisEckeard]

Purge the gas tank with exhaust from a running vehicle. Then weld.

[@jamesmoore7106]

I had to weld a boat gas tank one time. My dad told me take it out wash it out pump exhaust gases in it and weld it and that’s exactly what I did.

[@Capydachi]

Bombi is just bulking up for the winter

[@goof8372]

14:08 that is prolly for the parking pawl

[@Machines.In.Action]

1:40 - Honestly, if the zombie apocalypse hit today, I’m riding shotgun in this van! Who’s with me? 💪🚐

[@gonzalez7805]

Nice

[@michaelcochran7531]

hillbilly is the man!

[@davidaforeman7821]

What you need on that 241?

[@williamhudson5393]

Yes, you can weld a gas tank. But did you install a vent on the tank?

[@NikMartin-I-am]

The transfer case up against the exhaust looks no bueno!

[@albertdehn8381]

Thanks for sharing 😀👍

[@SteveMichaels]

Hour long video let me go make some coffee for this ! Team Layton

[@brucea822]

Héctor. Eres el chico más genial de la tienda (al lado de Shawn) Orale'

[@Angelorta1959]

Robby you’re not supposed to show where you put the car too many people

[@stephenbrown571]

I’m being too think hector might be the class clown. 😂😂😂

[@tammyyoung9358]

Robbie, you need to get your guys the earbud translators so they can understand Hector

[@trailvarment]

bless you Demri!!!

[@davidlee186]

Have Sean make access panel inside the body area

[@darrenstansbury6431]

I like seeing Owen on your team. I believe he is a great asset to the team.Thanks for bringing him on.

[@graememckay9972]

I'm a recent resubber. Has Cody left?

[@ReverseRichard]

Hilbilly is a beast good stuff man and Colton always just solid dudes

[@deannaguin8096]

Hi Hector !!!!!!!!!!!!!!

[@ericericson5885]

I didn't see them put antifreeze in Lynchy's car.

[@tonyjackson8363]

Hahahaha!!! Robbie used his orange love glove on the boss!!! You guys are great!!!

[@timnewby115]

why didn't you fill the t case with oil before install?

[@MykeHiggins420]

Bombi isn't getting fat, she's getting winterized

[@VAX1970]

Hi Hector!

[@3.0colorado21]

9:44 isn't that why you guys made the crossmember removable?

[@BenJaMin-zs4tt]

23:20 Hillbilly. Respect bud..💪

[@robertharris9469]

couldn't use a vented cap?

[@gost9396]

[@AmosAllen-v4s]

Edd China wears the same orange gloves

[@gragor11]

25:20 re the removing the gas vapour in the tank. Can the tank be flooded with the shielding gas from the welder, ie nitrogen? Is that gas in fact nitrogen? I don't think the CO2 percentage in the multi gas is explosive, Might be better than flooding the tank with water. Just a question.

[@davidwalker-ds7lx]

Sean does amazing metal work.

[@David-jp1cs]

Cómo me prestake abre en español me alegro un montón🇪🇦🇪🇦🇪🇦🇪🇦🇪🇦🫂🫂🫂🫂😃😃😃😃❤️

[@vandyFixer]

No glove...No Love 😂

[@patricktetreault4870]

don't put water in a fuel tank Sean knows either argon or co-2 keeps the oxygen out no oxygen no fire

[@deaneads3098]

You was making hillbilly strain so much on the transfer case he's going to drop a duce right on the floor....lol....