100% answered the questions I had about fixing my '84 anniversary edition door cards. Thanks!!!!!! Your videos have helped me a lot on my build.
@rockettfabolous15 күн бұрын
YESS FINALLY 😭 THE TRANS AM IS BACK 🐓
@michaelhanewich24515 күн бұрын
Hawks motorsports sells re-pop top rails for door cards. They fit like OEM on mine.
@jameshall438515 күн бұрын
Looks awesome. If you can find a company that can embroider a firebird logo on the suede area, that would really make it pop.
@nw_po15 күн бұрын
Was re watching all your trans am videos wishing for a new one and you delivered
@johnnylevansjr663315 күн бұрын
I love that you stuck with the trans am. Enjoy seeing all the videos. Keep up the great work. Happy holidays!
@davidwiley65215 күн бұрын
First off, thank you, thank you, thank you for the Trans Am content. How. KLEIN have a 10 in 1 screwdriver that perfect for those backwards speed nut. You use it without a actual bit in the octagon sleeve. The octagon sleeve fit in that speed nut like it was made for it.
@geoffreyb333712 күн бұрын
Man, I can’t wait for the next video. Those turned out amazing by the way can’t wait for more content. I know it’s hard to get videos out. Just really enjoy your content, buddy.
@fgamble312 күн бұрын
Lots of patience for sure!
@jackbrennan84763 күн бұрын
Nice job with the panels
@michealrobinson7 күн бұрын
Look amazing! Can't wait to see them in the car!
@dosgos15 күн бұрын
Those panels look incredible. That guy from Detroit who does the GM videos said that the expensive door panels typically had shag carpeting. I suppose that dampens sound, reduces scuffs, and can look good in some cases, but is a lot of design work.
@mattm578614 күн бұрын
Those are going to look sweet Matt!
@Vaino_Hotti15 күн бұрын
Padded materials are the way to go for good results. I could not find proper burgundy headliner material for C-pillar trims in my Mercury, so I used thin foam and non-lined suede. Problem was that the glue soaked through the foam and pressing them to adhere properly left indentations in the foam that wouldn't pop back up.
@rickkimble863415 күн бұрын
drill a hole through the end of a 6mm allen wrench work perfect for the speed nuts upsidedown
@domib38737 күн бұрын
Cant wait too see them in the car
@petecolone512515 күн бұрын
Very very nice. Dye the map pocket black and call it good.
@jennyloughry8967 күн бұрын
Great job, Matt!! Looks great!!
@robertappleyard705315 күн бұрын
Yes! Early Christmas gift!
@mikeeaton982215 күн бұрын
They look great Matt 👍
@juliocruz418415 күн бұрын
Great !!! Job Matt they look Great 👍🏼
@stevenayala232415 күн бұрын
Hell yea be Matt do your thing
@ledbased158915 күн бұрын
i was literally looking at getting new door panels for my 84 Trans Am last night. Thank you.
@BigIsleJ11 күн бұрын
Nice job Matt!
@Se7enMiIe15 күн бұрын
If you want to keep the 2 tone colorway look up a local sewing business. They can replicate this easily and for cheap. Left some patio furniture out and ruined the seats, local lady redid them in a hour for $100
@McWilliams9315 күн бұрын
Daddy’s back!
@jimmycapps365315 күн бұрын
Awesome video Matt. Thank you
@michaelhanewich24515 күн бұрын
Those snap ring pliers are exactly what I used on the speed nuts to assemble new top rails to new door cards.
@jeffreyshepherd848815 күн бұрын
I always use a set of needle nose vice grips to gently grab the outside of the nut from the top
@straightlineautobody11 күн бұрын
Bevel the crack both sides... kitty hair or fiberglass it.. reupholster... -at least till a newer comes along ❤
@megumei04415 күн бұрын
They look great! Can't wait to see the full interior video.
@aldrichg915 күн бұрын
Looks great!!
@ladariusmastin15 күн бұрын
Looks good bro
@kevinstrange905015 күн бұрын
I did the exact thing for my Camaro. If I remember correctly the cheaper board was like 6$ each at Home Depot and works great
@danebhardt710915 күн бұрын
Turned out nice.
@Dirtydeviantjbyrd15 күн бұрын
Kuafu sells them on the Amazon lol awesome video sir I'm preparing to do my 79 TA front trans seal
@dosgos15 күн бұрын
We used 2-part epoxy to glue the hard plastics to the backing board on our Astra door panels. Needed to clamp for 24 hours in a warm room.
@blt2drive4928 күн бұрын
Black 30 min epoxy panel bond from the automotive paint store for the top plastic piece... Need the special gun and a bag of nozzles. I use that on everything. Leave nozzle on after. Next time you need it, twist off 'set' epoxied nozzle & put a new one on and go again.Weeks or months later... I swear by it.
@omarzowila15 күн бұрын
We need more Escalade and Tahoe content
@omarjarad.805315 күн бұрын
Very nice 👌
@roycervantes134115 күн бұрын
Yeee Yeee 😊😊😊😊
@notchbackgta9 күн бұрын
Snap On actually does make a tool for those trim nuts. I can try to find the part number if you really want to buy it
@jeffreyshepherd848815 күн бұрын
Glad to see the trans am back!! But also, when you doing the next rage against rust video?
@mic59915 күн бұрын
Niiiice !
@omarjarad.805315 күн бұрын
❤❤❤❤❤❤❤
@jennyloughry8967 күн бұрын
Did you think about doing it all in suede? Different shades? Maybe gray on black?
@Geoffwhite1812 күн бұрын
I have the chopped flag in my garage next to my fiero!
@carlosgutierrez396814 күн бұрын
eBay sells the top rail door panels with a felt for 150 bucks
@yunuskhan775215 күн бұрын
what did you use first that black trim piece?
@ShaneOshow9 күн бұрын
Matt, what size wheel are you running on the Firebird?
@aldrichg92 күн бұрын
Did you ever find a good tool for removal of those nuts?
@burgerzz09s516 күн бұрын
Well it looks like I'm going to be searching for that L piece molding for the next year or so. I don't know any other way to make a nice border between the fabric.
@kadent732012 күн бұрын
Matt… From your tahiti video from 4 years ago “steering clunk” how are those eBay parts holding up till now? Considering purchasing them myself for my 06 Silverado.
@leonardcrisci725413 күн бұрын
I did something similar to my mustang
@Matt-co6bc15 күн бұрын
Where is tahitiiiiii
@domib38737 күн бұрын
You just gave me hope for my T/A door panels... with a custom twist fucking nice🫡