❤️ I made you something ❤️

[@RobbieBolog]

The videos themselves are a work of art these days. Stellar all around, sir!

[@stephenmcgeown]

The glue is absorbed into the fibers and grains of the wood where it eventually cures. In a bottle, the glue can't absorb into plastic or silicone, so it remains uncured.

[@spiralstares]

I’ve mostly seen the first and sometimes second versions of these builds and I say keep remaking them! It’s enjoyable to see someone approach a project they’ve done before, refine it, use new tools, etc. I am much more likely to watch a new version of a project that’s been done before than to go back and watch one from years earlier, for what it’s worth.

[@mfrederickson1]

Thanks for sharing your vision with us - adds so much dimension to the projects. Thanks again.

[@tooljunkie555]

So close to a million dave! Happy holidays to you and yours! 3rd times the charm!

[@seanfuller1561]

I don’t care what anyone says, I like the new format of videos!

[@clausmadsen9777]

Merry Christmas and thank you for all your inspirational content. I also, as others, enjoy listening to your podcast with Bob and Jimmy, and look forward to many hours with you guys in my ears as well as watching some great videos. Cheers!

[@peterdowning2525]

I know you’re just an internet celebrity, but you’re my favorite internet celebrity, and I love your content and inspiration. Thanks for a year of you, again, and here’s to many more. Merry Christmas Dave!

[@davidgilbey8884]

Thanks for all the great videos! So inspirational! Love your content, and hearing you Bob and Jimmy on the podcast. Happy Holidays!

[@Truewhispers40]

Its always good to revisit past work, it helps to see your growth....well thats what I think anyway🎉🎉 Merry Christmas🎉🎉

[@sapelesteve]

Happy Holidays to you & your family David! Enjoy! 🌲🌲🔨🔨👍👍

[@413DaveRN]

Love you too, Dave!

[@robshamel3210]

Merry Christmas! Thanks for all your videos this year. Looking forward to next year!

[@sgsax]

If at first you don't succeed, keep building it better and better. Happy Holidays to you and your family, Dave.

[@toolman123alicea2]

Thanks for sharing your time and knowledge. Hope you and your family have a great holiday and great new year 🎉

[@adamglendye]

It’s a Christmas Miracle! Great video

[@quirkygreece]

Happy Christmas to you and the significant other, David. I hope you have a blessed year ahead.

[@markglabinski526]

Just wonderful!! Thanks for revisiting an old friend for us.

[@ghostshadow1]

Haha! I do the same thing with bourbon sometimes! Love the smell!

[@davidkelly1634]

Merry Christmas. Slainte!

[@jlivewell]

Merry Christmas and Happy New Year!

[@MadAsKiwi]

I have not thought about using Whisky as cologne.. I may have to start lol. Have a great Christmas/Holiday season!!

[@mwrcrft]

Great looking serving tray. The new laser is really something with it's super thin cut.

[@samuelameyer]

The Palmer. Great choice for your utility blade!

[@jpalarchio]

Love that hoodie!

[@SchlegFace765]

Nice weiner dog hoodie! Merry Christmas David!!!

[@MCsCreations]

Wonderful serving tray, Dave! Fantastic work!!! 😃 Merry Christmas! Stay safe there with your family! 🖖😊

[@scottscootman7225]

Merry Christmas from Minnesota!

[@reforzar]

Third time is the charm! Beautiful work!Merry Christmas!

[@Warshipmodelsunderway]

Merry Christmas David!

[@dgoddard]

Merry Christmas, Dave!

[@fcschoenthal]

Really nice looking tray. I may have to make one (after the dozens of things my wife already has in mind). 😁 - Chris

[@the_canadian_dust_maker7852]

Merry Christmas !!

[@garagemonkeysan]

Great film. Awesome tray. Mahalo for sharing! : )

[@vernsteinbrecker3759]

Merry Christmas, nice build

[@Kernowwoods]

Love ya right back dude. Merry Xmas 🤙

[@jakerego9943]

Love the content…and the MudHens mug! Let’s goooo

[@worldschaos2181]

Merry Christmas

[@masterofnone]

Thanks for trying again. Happy holidays Brother

[@R.J.Wilhelm]

Love the Mud Hens mug!

[@emilevoyer123]

THANKS FOR ANOTHER GREAT VIDEO, MERRY CHRISTMAS TO YOU AND YOURS. EMILE & KATHY FROM CT.

[@ukevinjohnson5932]

Let's go Hens!

[@2hornscrest]

7:50 ... I wonder how many people heard that...😁... Happy Holidays

[@liquidrockaquatics3900]

I actually have a tray that my wife’s grandmother asked me to fix because it was missing trim and had veneer chips out on a handle. I fixed the veneer, remade all the trim to match, but ran into a problem as I tried to poly over everything. The surface of the tray has a hand painted spray of flowers that spread from the left bottom to top middle. Sadly, it separated and I never got it finished before she passed about 10 months after I had started it. I still would love to finish it, but I can’t find images from trays made back in the 40’s (if I remember correctly). Ever had an issue like this? I am afraid to remove the poly over the paint because the flowers will go with it. I don’t have the skill to remake them.

[@billdiehl156]

Thanks for another great year. Looking forward to what you have planned for 2025. Happy New Year, David

[@bobweiram6321]

The 70s aesthetic is hilarious.

[@Vikingwerk]

Nice build! Might check your guide bearings on your bandsaw something might be out of wack or dragging, that’s the only variable outside the blades changing in quality control I can think of.

[@sportflyer]

Woodworkers have superpowers and love overkill. And Dave.

[@MustangOntario]

Love this dude and thanks for all the amazing work and helpful tips! I'm a creative designer and have been just working on getting my hands into woodworking and my fiance is getting into laser cutting so your story is definitely similar. Also, love your design style 👌

[@anon_y_mousse]

The only change I'd make is to embed magnets in it so the legs are held in place when up. Of course, I probably don't get as good of a fit as you do, so for me they'd be necessary.

[@Shadd0724]

lets go mudhens!!!!

[@acacia1510]

David working on the Santa look

[@AngieWilliamsDesigns]

Which I got from my favorite drug dealer…..😂😂😂😂😂❤ Great project. Great video! Laughed out loud when you put the bourbon on your neck!!!

[@mojitomaker]

1:56 Merry Christmas to you and yours. From the podcast with the boys to your books to your ever fresh rethinking of your approach to your videos, i've been an avid fan / customer / consumer for many years - especially the LOLs. Firstly, thank you. Secondly, and far less interestingly, I have an Adobe Illustrator question. You appear to use Shape Builder to ‘blend’ two circles, and for the life of me, I couldn’t recreate the technique. Any tips?

[@KeithDecent]

Cool upload schedule 😉

[@MakeSomething]

😛

[@Wannabearborist]

0:57 I do tree removal, my superpower is: fuelling your superpower

[@GibClark]

👍👍👍👍

[@gcdrummer02]

Will thicker plywood warp if you only veneer one side? Say 1/2" or 3/4"?

[@MakeSomething]

1/2 might but I've had good luck with only 1 side of 3/4

[@HungLikeScrat]

I would assume wood glue dries under vacuum for the same reason water boils at a lower temp under vacuum. Is it possible the saw blades are now made in China with cheaper materials? Merry Christmas, David and family!

[@ConfusedSoup]

💙💙💙💙💙💙💙

[@jeremiahbullfrog9288]

Where do you get the ruler/straight edge with the finger guard for cutting the veneer?

[@MakeSomething]

Weaver Leather Supply

[@jeremiahbullfrog9288]

@@MakeSomething Thank you sir

[@cabman86]

It dries in the vacuum press because of the thinness of the glue and the air in the wood.

[@mattrinne]

You need to listen closer. He said it's MAGIC! ✨ MAAAAGIC!

[@MCsCreations]

​@@mattrinne Use the force, Luke.

[@michaelmagnani3463]

It dries in the bottle, trust me, i know....😅

[@TheTgranber]

Have a comment and a great Christmas!

[@JaredRandal]

Are the Fighting Wiener Dogs a real team?!

[@tradermunky1998]

That thumbnail is not what I want to see in my bed 😂

[@rutgerhoutdijk3547]

Secretly you want nothing more

[@griffhawkins8909]

​@@rutgerhoutdijk3547 Let's be honest here. If David were to ever decide to release a...."calendar"... I think most of us would happily buy it. I would.

[@ScottSpecial]

Do you have a Spotify playlist For the music you make ? Drill some holes, pound some pegs?

[@enockbatista6008]

Brasil Pernambuco garanhus

[@Toyotajunkie]

Ahh, but was it this Christmas or another one, that she asked for it. Haaa! (Asking before you get into the video, so imagine that and it hopefully will be slightly funny). Just kidding though.

[@Topo42mh]

Tape measure abuse is not a joke. How dare you toss him or her off the table like that

[@enockbatista6008]

E show papai

[@merikatools568]

Damn, i was hoping ya was starting an OnlyFans....sad Christmas for me now.

[@barryhalstead9299]

Merry Christmas

[@peterbrownwastaken]

Merry Christmas David!

[@digismurf]

Merry Christmas!

[@patrickbink4617]

Merry Christmas!