I Put NITROUS On My Bike Powered Kei Car!

[@phillheth]

really looking forward to the turbo busa swap after the explosion.

[@_Gingium_]

😂

[@eyedeekay143]

One of the first things i thought when i saw this car 😂

[@IamBOBski]

God no busa swaps are getting old there are other bikes to try js

[@sethk1429]

One thing I love about this is the fact that honestly that 660cc will sip on the nitrous even at 50hp with that bottle.

[@_Gingium_]

Yea exactly!

[@ImInLoveWithBulla]

Actually, a nitrous setup is independent of engine size. A 50 shot is a 50 shot whether it’s on a kei car or a 700ci pro stock mountain motor.

[@sethk1429]

@@ImInLoveWithBulla yeah my wording was not the best. I meant even at 50hp, which would be a huge amount for the engine, a 10lb bottle will last forever. Something like 4 minutes of continuous spray. Also mountain motors are “technically” 820 ci and higher. I only know this because the mountain motor guys made jokes to my uncle when he switched from a 632 tall deck to a 740 hemi head motor. They always used to say “you’re almost there”😂.

[@SecwetGwiwer]

Day 3 of asking for a Honda Fireblade engine swap.

[@SecwetGwiwer]

999 cc - 214 hp at 14,500rpm

[@marcosamadop_1]

CBR1000RR engine coming right up

[@_Gingium_]

Let’s see if the stock engine survives or not

[@SecwetGwiwer]

@@_Gingium_I’m sure could handle a 200 shot 😉

[@enjoymusic6365]

Ok but making the car actually fast will ultimately ruin it. What makes the car so fun is that it’s a challenge to drive fast. It’s small and light with not a lot of power and it means you have to learn and get really good at carrying the momentum of the car through corners. Putting a very powerful engine in the car will ruin that balance. A little more power won’t hurt it, but more than 100hp will ruin it’s balance.

[@osmiumviii4193]

Nitrous purge giving NFSUG2 vibes 😎

[@Wooden_Hammer]

The steering wheel mount for the buttons is 🔥

[@trentschlick3261]

Hey Caleb! Just wanna say thanks for making such entertaining content. Been watching for years now, seeing you grow and become more knowledgeable is inspiring!!

[@_Gingium_]

Thank you so much!

[@chappy1101]

the quality of the videos is crazy now. love the paint booth room with the lighting for the b role clips

[@aceprater5397]

Sweet! Im so jelly of that plasma cutter!

[@feverdream2661]

So proud of you Caleb. I am a long time subscriber and what you have built in such a short time is crazy. You have a multi room garage, CNC machine, paint booth, lifts, etc etc and now a dyno!!! Dream set up for any car guy. Keep killin the game

[@lcq4blackstar]

Man... you killed it with the exhaust, the motor sounds so good! You are into the nitrous for a G... The move would have been a used C-15 series Rotrex A/W or non-intercooled with simple PWM boost reference on the stock fuel system/ECU... IMO would have suited the engine perfectly! Probably could have been done for $1500-1700. On my GD3 with the low boost kraftwerks kit same as above setup (non-intercooled) it was good for 30WHP on the dyno and dead reliable. (C15-60 Rotrex W/restrictor to 5PSI)

[@TheMichal1260]

I just put turbocharger on my 40hp 900cc fiat cinquecento just because its funny. Im glad, that im not the only one whos making small slow cars a bit faster xD

[@Sbinott0]

The old one?

[@TheMichal1260]

@@Sbinott0 1994

[@x-tasi]

My god the bots are going crazy on this one

[@Blurgamer17]

Some generic 🍑-bot: "[Insert some suggestive question here]," 😂

[@_Gingium_]

I don’t understand how KZbin hasn’t fixed them yet 🤦‍♂️

[@redsquirrelftw]

Twitter has been purging bots, maybe they're sending them all here lol.

[@brentboyd4906]

My favorite add on was the power switch in the ash trey, so clean. I did the same for my z4 but with electronic exhaust opener.

[@Mr.SBF.Maverick.Racing]

You need a full throttle switch and bottle heater

[@BrodeyDoverosx]

Yep. Get a haltech to control it, easy!

[@chrismichaelyoung]

I think it's great you're trying new stuff. Motorcycle exhaust and nitrous goes crazy on the Beat

[@notsofast1334]

The Supercharged Motor from an H2 Would be insane in this little Car!

[@caseymoore303]

This has been a fun series, excited to see where it goes. My 3 cyl love started with my 1999 speed triple. Have since owned a 1999 Daytona, '13 speed triple, 16 tiger 800. Also a couple singles, parallel twin, V twin, I4, crossplane I4. On motorcycles, I find 3 cyl as the right balance of rawness/power delivery/refinement. Singles and twins weren't as smooth, 4 cyls a bit sterile and sometimes even buzzier. At one point, I was very close to nitrous on the speed triple but never did it. Now I can live that dream vicariously. I've been quite tempted to get a cappucino though....

[@Drunken_Hamster]

Triples and crossplane twins are the goat. I'd love to see and hear an even-firing 5-cyl, though.

[@dvrs-e6t]

Good to see you rust-proof the newly drilled holes.

[@outdoorchristianboy]

Wish you would’ve covered the knock system some. Curious about it.

[@steammartian7705]

Dude. That thing is cool as hell. U don’t need fast. That thing is cool enough to turn some heads

[@markpegler3277]

This car is crazy cool . Love your content more than ever keep being true to the builds you love

[@thusmarshal8815]

The exhaust sounds phenomenal. It's like half a Subaru or a Porsche flat 6 that sings

[@Ady_Mih]

this is just insane

[@_Gingium_]

😁

[@RearEngineShop]

It’s fun watching a slow car become slowish! 🤘

[@IAM2CAN]

Ngl this beat sounds like much fun, i like the sound too.

[@nathans5773]

Cheap parts disappoint. Where have I heard that story before?

[@802Garage]

I'M SO EXCITED FOR DYNGIUM! Dynium? Gingyno? YOU GET THE POINT!

[@KJMTurbo]

Key things with Nitrous, inspect your spark plugs often, don’t use below 4,000rpm.

[@_Gingium_]

Thanks for the advice!

[@Drunken_Hamster]

400m absolute? Or is that some kind of proportional thing? Cuz 4k doesn't give you much of a powerband on something like an LS if it's an absolute number.

[@KJMTurbo]

@@Drunken_Hamster It’s proportional but even so the later you use it the safer it is, depends on how big of a shot and the amount of air drawn into the cylinders. If you have a very aggressive cam at low RPM where you have valve overlap and low vacuum it can destroy inlets or worse.

[@KJMTurbo]

You can KZbin nitrous backfire compilation, I’m sure that’s got to be a thing 😂

[@perspeci]

Great to see you used the paint booth 😀

[@Fugoczi]

we need a hayabusa swap on this car. Would fit, sounds great, more power would a be a sick project, Busas are not that expensive

[@ollybrowningg]

this has to be a worlds first

[@ryandoyle4344]

Nitrous is Fun!! It may be easier to use with the button on the shifter. Although, my kit had a micro- switch setup for full throttle on the TB. Shifting, steering, throttle and a button will keep you busy. IMO, micro-switch.

[@honda4185]

Should do a detail to the engine bay so it looks as good as the car! 👊

[@coreyjohnson993]

Keep doing stuff that makes you happy.

[@rodekil1906]

crazy man i’ve been watching you from the horizon days back in high school. keep up the good work man love the content

[@erocker78]

I had that same nitrous kit on my 2001 civic back in the day. Had a ton of fun with it but it blew the head gasket.

[@misath113]

Can somebody explain this: From 13:07 the nos switch is not connected to the wire. Its unplugged. Only the purge switch is connected

[@harleym.4903]

Genuinely dont know why this channel doesn't do better, the quality, consistency and content is all there, keep up the amazing work gingium. Genuinely in the top 3 car channels for me next to Puddins fab shop and Toms Refurb. Promise me you'll bara swap a sn95 mustang (not new edge those are gross, melted cheese looks better) or make a mid engine 1st gen prelude, oooor maybe a mid engine ford probe with a Yamaha ford v8 out of the melted cheese SHO Taurus. Just some idears from the thinkin man.

[@delavarzarnegar8170]

You just dropped the top 3!

[@CorneMaritz]

I am so gutted I only saw this video now! Man, teenage Gingium must be so proud 😂 *insert need for speed underground 2 intro song*

[@Cobra_427]

You made me want to get a Miata years ago, and now you're selling me on a Beat, looks like I will be having a full garage of my own at some point

[@ProfessorLX]

Nitrous purge is so you can set the bottle pressure before using the nitrous. If you have 1200 psi of bottle pressure when you are tuned for 1000 psi you are going to have a bad time.

[@Garrett-tm3to]

Damn you Caleb now I wanna put nitrous on my single cam accord.

[@vehiclespotter7431]

In before he blows it up chasing 100whp

[@balintszanto8816]

Hey i just want to say that i love your stuff. I have been wathing you for a couple of years now and i hope you will make videos for us for a long time. Also i would like to add to all the people that say to put an inline 4 motorcycle engine in it, i think a 3 cylinder bike engine would suit it better like an mt-09's engine since one of the few perks of this car is that is a 3 cylinder like the mt-09

[@dorkvis5008]

Love it 👍 also with the meets, plan it a week in advance or longer

[@redsquirrelftw]

Woah I thought you were kidding about getting a dyno, those are crazy expensive last I heard. That's awesome.

[@josephbaker2692]

Dang your landlord has a nice 4Runner it looks like

[@colejohnson5447]

The bottle takes up the whole trunk 😂

[@eliveltonbecker]

Youre the beast Saitama hoooooooly

[@u.e.u.e.]

I'd prefer one thing: If you could twist the exhaust-end from perpendicular to the left wheel to a real exhaust to the back! 😉

[@alezisaa]

Sounds really good

[@FORDLYFAOTEAROA]

Ginge coming in solid with the weird projects,whats new 🤣 but for real,making odd car content interesting 👌🏽

[@sfisosg7904]

Sometimes thats all u need a couple friends and meeting up with their cars 😌👌🏾

[@AimlessMoto]

Really interested in that knock system... where'd you get it?

[@91ludesit]

Those wheels are so dope.

[@justinhopton999]

Takes me back to Need For Speed Underground Days

[@VelocityisTaken]

Just saw your ad on marketplace, why are you selling this thing? It's awesome!! I know you probably got a plan for something much cooler. Can't wait to see what you have in store!!

[@eliasmachalek4856]

You gotta watch out man, Caleb is running 3 honda cylinders with a 100 shot of NoS

[@matriix18]

You should get an R1 motor to put in there

[@SKOMPAS]

Nitrous purge is cool and 100% made up by big Nitrous trying to sell you more!

[@ifeeIcoke]

There’s a company called JFC racing which manufactures a 2.8 L v8 using two Hayabusa engine blocks that produces 780+ HP. This is the type of car I’d see having one of these hahahaha

[@Jeeplee_rc]

Sick! Hooe the motor likes it!

[@kagamiox6972]

When the engine goes (and we know it will) would love to see you swap with a inline 4 v-tech engine or even keep it 3 cylinder with a gr Corolla engine

[@ninjaboi636]

“He’s got enough nos in there to blow himself up” - Ja Rule

[@HunterLexus]

I’m getting my Suzuki cappuccino in probably like June and putting an aftermarket ecu is like priority 1 after cleaning it up.

[@epp9122]

Dyno nice! But how are you going to get the exhaust fumes out?

[@kennethwillett5193]

Gingium.. if this is a kei car how did you get it to register in Georgia? I thought they just outlawed kei cars cause I was wanting like a little Subaru sambar

[@_Gingium_]

They “outlawed” Kei trucks. I had no issues registering this

[@kennethwillett5193]

@@_Gingium_ well dang.. this whole time I thought it was both

[@teemoL]

Please put a lexan panel to show the bottle. Honda things 😂

[@Dan12gt]

Do any of you remembered when Gingium used to do Forza Drag videos 🤣 only the OG ones would remember

[@Bryce7O3]

When u dropping the top and letting the wind caress ur head

[@dvrs-e6t]

Would love to see a collab with gingium MCM and AutoAlex

[@ipoopmuffins]

serious question, could you attach like a steam whistle (or any really, but one that sounds like a steam whistle) to the end of the purge line so it whistled every time you purged??

[@ImInLoveWithBulla]

A kazoo!

[@MemelordJord]

Gingium

[@CalebBoender]

Sausage

[@RyneDickens]

I just love this build haha!

[@Thecasualgamer-pp5wc]

All your missing parts and dissapointments is why you buy from Nitrous Outlet!! We sell kits with Every part you need for your car! We aren't like other companies who just throw you the parts and have you figure out how it works, we have our parts built in house ready to install in simple kits!

[@markpease9575]

Kits for ford focus non turbo.

[@makeitorleaveit1]

A hard top would look sick on this 🙌

[@zerodqkov341]

Bro got a dyno 😮

[@g.simard854]

do Teflon tape and loctite over it for best of both worlds, industrial technique 😉

[@jesse9638]

Have I ever wondered what would happen? I’d venture a guess you’d get an incredible hole in a piston. lol

[@MyBridgestone24]

+1 for Aprilia Tuono 1100 swap. 175hp of heargasmic fun.

[@chasemaccc]

Was that amazon basics kilmat in the engine bay?

[@MrDudestein]

glad that you didn't go turbo, let that tiny engine sing!

[@PaddyBoy644]

Where’s Jackstand Jimmy when to need him?😂

[@thomascournoyer6799]

Hello gingium crazy video like every time !!! But What happen with the drift truck ?

[@nidiahk]

200hp or bust, then turbo busa :D

[@chickenheart3612]

Please do mind this comment reminding Gingium about all the past comments written by experts about his sub-par installation of the lifts. This video was probably recorded and finished way before the last few videos where people in the comments have raised awareness about the lift situation, but I feel obligated to bring it up again. Safety is Paramount and it's worth every single penny. He doesn't seem to have replied or read the actual professionals that raised concerns yet.

[@yota1092]

Stop spamming this comment on each vidéo hé already replied under one or your comment

[@chickenheart3612]

@@yota1092 he has not replied to the actual concerns under the shop renovation video. His reply was just "it'll be fine" and did not answer any of the concerns they raised. We're gonna keep bringing this up until it's properly addressed.

[@Mouthy_Trucker]

@@chickenheart3612all his shit are barely even cars , they don't weigh enough to matter

[@chickenheart3612]

@@Mouthy_Trucker you think engineers make safety regulations for fun? Do you think they only apply to edge cases? That we don't bother with setting outlines to make things safe in **every** situation?

[@fakename287]

​​@@chickenheart3612 yes, because at the end of the day it's not the engineers making the final decision, it's the lawyers and accountants, obviously they're going to overcompensate to cover the corporation's ass

[@unkownfather498]

Put a big ol garrett turbo in it

[@TheJraze18]

Difficult, but you always get it ✔️ 👍 done🎉

[@UKfromadrone]

knowing how gears and gasoline's kei cars ended up without nitrous, what kind of engine swap do you plan to do?

[@_Gingium_]

😂

[@dirty2jz283]

I thought registering a Kei Car was illegal in Georgia, part of the states that are banning Kei cars. Wait I just re-read it, its for Kei Trucks. Carry on.

[@jackoverholser8399]

I wish I could pin your channel to show up at the top of my feed every time you post

[@ariefpiero9276]

gingium why dont you build the motor? like nothing crazy but of course for more hp

[@LongerRider]

600cc motor + 2000cc of nos= whoa

[@taylortankersley6325]

Aaand empty bottle before he gets it on the dyno 😂

[@IMR_Seb]

Hey Gingium, completely off topic from this video but its the most recent so im giving it a shot. Watched your project miata subaru swap episodes, the drift truck, and been watching the first couple episodes of Project Binky from BOM and theres still one thing Im not understanding: How do you determine the height of the subframe jig in the new chassis? I understand how to make the jig, I get the other planes of alignment, I just don't get how you determine the height of it relative to the frame rails. Edit: i'm probably fuggin stupid and missed it but im struggling here.

[@STR8SICCC]

*How do you like the amazon sound deadening material?*

[@GodsGunsGlory777]

Imagine the fit motor in here

[@givenlife706]

The kit you got was for somebody that had everything already installed and they just need a bottle and stuff that's what you bought

[@constructdestruct360]

This channel has now officially "Jumped the Shark".

[@_Gingium_]

Yep, sorry I’m trying new things!

[@nickcook7408]

It needs a 13b