Ok maybe now we can get back to more serious things?
@stevehunter7275Ай бұрын
Finally he put the engine in
@CanicusVoidАй бұрын
Serious like making a steam locomotive valve gear system? Don't think this game allows for a functioning version, but maybe at least the linkage can be made?
@N1FuryX60Ай бұрын
No
@BLKBRD-SR71Ай бұрын
😆
@apersunthathasaridiculousl1890Ай бұрын
W16 when :(?
@tyreniАй бұрын
+1 vote for huge torque tractor pull thing. It's what I keep trying to build!
@kANGamingАй бұрын
First I need to build a big trailer weight then put a tractor on it!
@MrMattkidАй бұрын
@kANGaming those tractor sleds they pull for tractor pulls actually increase drag as it travels farther by dropping spikes into the ground like a plow. Idk how you would simulate that in gearblocks, good luck.
@DarktideVtuberАй бұрын
gotta make sure that trailer is loaded with something too
@DarktideVtuberАй бұрын
perhaps a nice car? (wink wink, nudge nudge)
@googolplexfpvАй бұрын
@@MrMattkid Same way they do it in the RC world. Trailer with a flat bottom to slide on in the front and a large weight sled that as the trailer is moved forward the weight moves from the back to the front.
@nekowknightАй бұрын
When you generate more torque than the earth and start attempting to leave the planet
@mimic-9928Ай бұрын
I think that the reason it was flying is due to the fly wheel spinning causing extreme gyro force. (but i that's just my best guess)
@SteffedPepperАй бұрын
Fly wheel=flight 🗒
@dizzijayАй бұрын
i'm going to add on to this and say that it is alos probably the weight of the "starter". When i say this, i mean that when kan brakes, the sarter being so heavy at the front just makes the front tip down
@erictheepic5019Ай бұрын
@@dizzijay Considering how short a moment it has to the front wheels, that would mean that it weighs, I dunno, 100x more than the entire rest of the car? Somehow I don't believe that. I also don't think that would allow the car to achieve flight.
@TheLtVossАй бұрын
Yep once he steers the end lifts off. probably do too the gyroscopic forces frome the engine and flywheel
@loganlobrutto8143Ай бұрын
I agree but I think it’s the flywheel, my thoughts are put one on the front side see what happens
@blueflame_smАй бұрын
Hey kAN you can just right click it and enter a value xD
@kANGamingАй бұрын
I don't want to admit how long it took to remember that.
@cheetahman515Ай бұрын
@@kANGaminghow long?
@Kunzite100Ай бұрын
@@cheetahman515 At least 8min 15 seconds
@lio1234234Ай бұрын
Two words: gyroscopic procession
@gravspeedАй бұрын
Is it procession? I thought it was precession...
@pat9353Ай бұрын
Torque so high the resulting gyroscopic effect will have you saying “Wingardium Leviosa”
@SSZarisАй бұрын
So much torque the chasis twisted coming off the line
@MrMattkidАй бұрын
I think it's time to make the radial 160 and try that instead 😂
@warfin1379Ай бұрын
I think the reason it was flying is because the crank was so heavy it was acting like a gyro. so the lifting was just the angular momentem of crank doing weird stuff. idk if you noticed but when you turn left it would pick up the front causing that bouncing, and then the rear would lift when you turned right. now why the rear was so bad and the front was just small bounces. is because when the front would lift it would just drive the rear axel into the ground pushing it forward and forcing the front to return to its position, on the otherhand when the rear would lift it drove the front into the ground making the car unstable and spin and inturn lift the rear more. because of the angular momentum of the crank if you turned it would try flip the whole car, but it couldnt bc it was so heavy and long so it ended up just acting all jank.
@AmericanValorianАй бұрын
Big engine = Big cool
@jenniferp3721Ай бұрын
Why do it? Because it is absolutely absurd. That is what makes it so appealing.
@SteffedPepperАй бұрын
I never even asked for it, but how can you build a giant motor and then be confounded when people want to see it power something? (A car being the most obvious). You already made it! Why not use it? You're seemingly a car guy too!
@joshuamoyer3542Ай бұрын
I thought the same thing. If everbody wants it, why not do it? and do it good! this was kinda half assed tbh.
@Laqota15 күн бұрын
I believe the flying of the back wheels is because it's generating so much torque and power it's just turning the back in to gyroscope.
@sarge-rf8mqАй бұрын
There is no way this game is calcuating the gyroscopic physics of the large rotating lead disc? That would explain the levetation
@ericwemmer402Ай бұрын
I would like to see you integrate a cantilevered suspension into one of your creations. I have enjoyed these videos and look forward to what you have mentioned building.
@Spookyma2Ай бұрын
Is the gyroscopic forces of the rear lifting the car to infinity and beyond?
@charlesolson2180Ай бұрын
With that much levitation power, You could slightly shift a counter acting weight in 3 different positions, in to pitch up, middle to stabilize and outwards to pitch down, you would probably have to build a full body and maybe split or run this engine in parallel to up gear it enough to lift up and off the ground almost immediately
@jacoboopy9150Ай бұрын
the vehicle pulling to the right / left is cause of the diff :) using a spur diff instead of a crown will fix it
@the.other.ian.Ай бұрын
i guess a 160 cylinder engine on a vehicle was just too much for the game to handle. Maybe a 69 cylinder engine would work better?
@apollo7557Ай бұрын
9:30 “So much torque the chassis twisted off the line”
@jonahdittmerАй бұрын
You finally did it. Thx
@methusmit5015Ай бұрын
Maybe it's the engine exaust that's making the backend fly ? XD
@nolafluffАй бұрын
i first tought it was the gyroscopical forces but when you kept floating idk what the problem was lol
@topaz123212Ай бұрын
I honestly think the reason the rear end flies is due to very little rear end weight compared to the boat anchor for a front end lol. Other thing as far as front end bouncing, could be due to a lack of suspension components. But if got should make a video, got should try making a working helicopter engine and body to see if you can actually fly in gear blocks
@TheMostUtАй бұрын
Suggestion, one engine per wheel, OR alternately, four 4cyl engines side by side, connected with crank gears (odd number may be easier?), then those out to a gearbox.
@ft3917Ай бұрын
i think i would cut the motor in half, and mount the two halves 180 degrees apart like a V8 but with more cylinders and maybe even like a T, 3 rows.. just a thought, to make the motor more compact
@Pheonixhack18 күн бұрын
Another thought, on top of the gyroscopic forces, it could be just like the suspension glitch in Scrap Mechanic
@Gabriel_O.Ай бұрын
9:30 even god himself disapproved of this atrocity and picked it up to stop it 😂😂😂
@WillDalton-f8wАй бұрын
Just his reaction when it lifted the first time made me actually laugh out loud. Lmao
@thefaulnt3562Ай бұрын
9:29
@atomicreptiliascreator738Ай бұрын
I’ve been thinking about you making a combustion-driven steam locomotive.
@iceofwolfАй бұрын
Woo! You did it! This is the most serious thing you've ever done. :D This dumb idea made me so happy.
@dogobeast97Ай бұрын
Now you just have to build a plane and put it in there.
@stevepittman3770Ай бұрын
Yeah everybody is hyped for fast race car engines, but I for one would love to see some beefy trucks with high-torque engines.
@banlanderАй бұрын
i leave the first video at "we're never putting this in a car" and the first thing, and i mean the VERY first thing i see on my recommended is "i put the 160 cylinder engine into a car"
@tampabay14199Ай бұрын
Yep, your problem appears to be gyroscopic precession. The motor spins clockwise looking forwards. You applied a twisting moment clockwise which resulted in a forward twisting reaction (90 degrees later in the direction of rotation).
@davidjohnston2941Ай бұрын
Koenigsegg just called "thanks but no thanks".
@codyburton4484Ай бұрын
Maybe the exhaust needs to be funneled to the back of your 160 engine monster creation lol
@TheMike599Ай бұрын
Kan. Little gear to big gear will lower the rpm of that behemoth. More torque, yes, but I think ur having issues with too high of rpm to the gearbox
@Indy509Ай бұрын
1min in, audio sounds like what happens when you kick it into hyperdrive reverse gear in, "Big Rigs: over the road racing".
@Nicetruck78Ай бұрын
Can it fit in a mx5 Miata
@MajorWinnieАй бұрын
9:56 what happened there is that you need two of the engines inverted into each other like plane props, possibly 4 so it would have completely equal force down and up maybe adding a centrifugal way of turning this might also be needed using flywheels and brakes, dont have the game but i would love to see where you go with it!!!
@60NineKАй бұрын
hey, I never asked ;) I just try and give good advice while also asking for you to pursue things I have.. but with better geometries because you fully understand them. like the steering arms and acherman angle in the last video.
@bradlinsley8028Ай бұрын
man that was so funny when it just started flying hahaha
@vannancoull-barnes4997Ай бұрын
Could it perhaps be that the sheer amount of exhaust is creating a force lifting the car upward? If so that would explain why it left the front end on the ground because there is slightly more weight due to the starter and player.
@chayes124Ай бұрын
Maybe the force of the exhaust gases was the cause of it flying up
@trevormcdaniel52473 күн бұрын
I think you need to set the exhaust up so each firing cylinder is going into a pipe. Like a 10-16-1 system
@valeriotibaldo71Ай бұрын
the reason for the back lifting up it's probably cuz of the gyroscopic force of the parts roatating
@Geoffr52411 күн бұрын
Garage 54 just replaced a Lada engine with 16 chainsaw engines in the form of V16. Had to make the engine bay longer. It was under powered.
@ph0sgene967Ай бұрын
Maybe it was the exhaust pushing downwards so much that it lifted up? Idk if thats even calculated
@kobitz9001Ай бұрын
even when you aren't playing scrap mechanic, you can't escape the suspension glitch. (I know this is diff but the effect is oddly similar)
@BLKBRD-SR71Ай бұрын
11:13 You're back end seems a bit... FLOATY! 😂
@IceSki117Ай бұрын
Kan found rotational torque that tries to flip your vehicle under the rotational momentum generated by the engines.
@orlandochavez7472Ай бұрын
Your A Wizard Harry! 🤣🤣🤣
@bigpoints101Ай бұрын
boy that thing fly's
@hexenhammer483Ай бұрын
Cyli McCylinder lives!
@the123kingАй бұрын
I wanna see a go kart with a massive single 2x2 cylinder powering it, with belt/chain drive to rear wheels. All torque, no RPM
@masterelite1555Ай бұрын
I would love to watch u build a truck pulling set up❤
@ShawnF6FHellcatАй бұрын
One thing I'd like to see you try, is to use propellers to make a pseudo downforce.
@ariel931-is5mrАй бұрын
we are braking the physics with this one 🗣
@matradzАй бұрын
Maybe try to build world biggest engine. I wonder how much that can put out in game
@kyrioz2z834Ай бұрын
you should make a video about engine position and is effect on stability
@anteshellАй бұрын
Does this game calculate any kind of lateral forces for the axles? If it does, there might be something similar happening as with Scrap Mechanic and suspension glitch. If that's the case, maybe putting some support in the middle of the engine could stabilise it a little.
@demogod4955Ай бұрын
An engine so big it is the car
@Alfred-NeumanАй бұрын
What's the point of building an engine if you are not using it in a car? Come on Kan, you should know better! 😄
@daniellewis1789Ай бұрын
You ought to transverse mount this thing.
@tqit3173Ай бұрын
Ooooooooh new kerbals :DDD Realise the Kraken!
@RatoCavernaBRАй бұрын
Stupid idea: Try to build a potato slicer.
@The_plant789Ай бұрын
You can copy paste the settings of any part just with ctrl c and v :D
@WeldoholicАй бұрын
9:48 rotational mass…😂😂😂
@federicogaravaglia369Ай бұрын
The car just wanted to be a kite
@Pippy626Ай бұрын
Could the exhaust be reacting against the ground? It was going sideways with the flow
@pedreirogamer445Ай бұрын
11:22 lifted back wheel drift, impressive
@EndelinАй бұрын
A reverse wheelie? That's new.
@60NineKАй бұрын
I think the game didn't like how the wheel axles were bending, causing some weird phantom forces.
@nyspace1Ай бұрын
Thank you for making it tho
@Till-ImboardАй бұрын
Bro, you need to do a big block V8 and try and make as much power as possible
@humbleeagle1736Ай бұрын
Now give the engine 4 wheel drive and use it to fly.
@renukachandrashekar9890Ай бұрын
i want you to check out the hand crancked tractor by AL Magma
@theflyingshunterАй бұрын
Think you could make a diesel train engine And have it connect to the bogey truck wheels with a drive shaft or something
@KentuckianАй бұрын
Speaking of the semi gear boxes my uncle has one that has a 13 speed main gear box with another 4 speed auxiliary gear box behind so it has 52 gears but you dont use them all
@keathmueller2430Ай бұрын
169 cylinder engine next please!! 🙏🙏🙏
@MariusFeidt-xb4dwАй бұрын
make a race with your friends in gearblox but you have to build your own engine and car
@dragade101Ай бұрын
Is the exhaust counting as a downwards force to lift the car up?
@StateBicycle366Ай бұрын
Kan dont lie to us you know you wanted to do this aswell, ur unconscious thought craved for this. Accept it its ok
@Skulljeep00Ай бұрын
I think the exhaust was so much per cylinder it was creating lift-off flight.
@jamesembry6721Ай бұрын
Thank you
@SSZarisАй бұрын
Truck would be so damn cool. Truck with an i160 would be even better
@clivefasal3683Ай бұрын
Now twin turbo all 160 pistons
@xusername357Ай бұрын
Make a hybrid vehicle with electric drive and an engine onboard to drive a bank of alternators, like what Edison motor company is doing with their trucks
@HarenaxАй бұрын
Is the flywheel on the back generating a gyroscopic effect?
@ethanrainsford4251Ай бұрын
Are turbos in the game if so this with loads of turbos would be entertaining either that or more cylinder capacity
@TractorsareawesomeАй бұрын
Gonna say majority of your viewers probably don’t care as much for the nitty gritty engineering stuff as they do for the coolness factor of things. I love both, but I’d say most want coolness over numbers.
@listerfeend2004Ай бұрын
I disagree, though we are a sample size of two. I really like getting the numbers and also the explanations of what they mean, and how that translates into the game ..
@TheTwtwoАй бұрын
Split engine in half set one seide to run in opposite direction then merge the outputs to a final drive
@chancejohnson7442Ай бұрын
Do you uplaod your stuff to the workshop??
@two-fiddy1972Ай бұрын
The truck is drive is a 18 speed manual transmission
@Dylanq1Ай бұрын
"im not putting it into a car"
@MarCristanFranciscoАй бұрын
Imagine it putting it on a lambo in irl😂😂
@axelvandelft8982Ай бұрын
Waarom maar je niet eens een w16 motor oftewel een realistische of een v8 v6 v5 ? Inline 4 6 7 ?
@clintonhunter3834Ай бұрын
is your exhaust acting as thrusters?
@EthanFoster-q7fАй бұрын
thank you
@NoobaryaaАй бұрын
Ok what do we do when a vehicle is too heavy? Correct, we slap more wheels onto it. This might break the game even more OR it distributes the engine weight better and the I160 actually gets to go fast 😂