I ruined another GPU....

I was told by the XOC community that I wont get any farther in my OC adventures unless I lap my GPU die AND my LN2 pot... since I already lapped the pot... I guess its time we work on the die...
Get the EVGA XR1 at www.evga.com
Get your JayzTwoCents Merch Here! - www.jayztwocen...
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2Jayz...

[@FranciscoLopez0]

JayzTwoCents next video: Building a Faraday cage because 5G is affecting my gpu overclock.

[@Spiralem]

that be interesting if wireless really do affect the score

[@LettuceLand]

Next video: lapping all my 3090s with a SLEDGEHAMMER... oops

[@dimitarkunchev]

@@Spiralem When you are dealing with bare board - yes. It is designed to go inside a metal case that acts as a shield. Using it in open air like that makes it susceptible to EMI. If the microphone signal is strong it can cause disruption in the board’s signals. But it is unlikely really. If you start a two-stroke engine nearby you would have immediate crash, but a tiny microphone with couple of dB of signal? Doubt it.

[@zivmizrahi358]

The chips from the covid - 19 vaccine affects my GPU score!!!

[@hugodc1225]

While wearing a thin foil hat xD

[@samuelleonchengco1207]

That look on Nick's face saying "I'm done with this sh*t" 😂

[@Aleph-Noll]

rightfully so lol

[@bretteinhorn2629]

Thats who was holding his head in the background i guess...

[@Octoberdaze]

Yeah man, I don't have time to watch as much youtube as I used to, so maybe I'm missing the right videos, but he doesn't seem very personable when he's on camera? The Anti-Phil kinda.

[@landrysaathoff2418]

I’d be scared to even hold a 3090 Jay: * *tortures 3090* *

[@hitn-gaming]

I'm totally scared that I screw something completely up when handling my components so I'm extra extra carefully and shoo away my cats so that nothing happens. Then I watch JayzTwoCents, Linus tech tips and der8auer and see how they handle their hardware :D

[@timhartherz5652]

*Totures 2 of them, implies to do it to a 3rd one* Painful to watch to anyone who can't even buy a Card at all, still watched the whole thing with morbid curiosity.

[@UnluckyDomino]

When you get 10 different cards of each 30 series SKU, for free, you start doing anything u want with them

[@hitn-gaming]

@@UnluckyDomino oh I wish I would have this many cards laying around. I would be like a kid in the candy store 😂

[@RaimarLunardi]

I have all care in the world with an 2010 HD5770, and my 1070 is better hold then my nephew... lol

[@mhmpotatoes5373]

question that someones probably already thought to themselves if not already asked:"should i do this to my card?" answer: *p l e a s e d o n ' t*

[@float32]

Yeah but with everyone not taking the risk right now, what a great time to go for world records, with no competition.

[@Mani-aX]

@@float32 or busting your card and not being able to get another. Well, not him, he gets them given to him on an silver platter lol.

[@MS-pk2se]

we are well past the point for usual user for things "not to do" to your card few videos back.. -)

[@TheArcknight]

I did this to my 880 Ti and now I can time travel. As someone who has been to the future I can say, you don't have anything to worry about. Everything will be fine... unless of course, you are a human.

[@xymaryai8283]

@@TheArcknight i see what you did there, 880TI lmao

[@MisterRorschach90]

Jay seriously you need to partner with one of the machinist channels on KZbin and do a video where this kind of thing is done professionally. Or that they provide you the tools to do it yourself. Using precision tools the correct way would go a long way at increasing your performance. I’m honestly surprised that stuff like this isn’t done more often in the competitive oc sector, or if it is I haven’t heard about it. Usually it’s just people with sand paper. Lapping something perfectly flat requires a setup with multiple surface plates and a lapping plate with groves in it that can catch the particulates left over from lapping. When done correctly you will be removing so little and doing it so precisely that the chance for catastrophic failure is minimal. You could get it so flat that no tim is required and the heatsink will stick to the die or heat spreader without pressure. Using the right gear you could literally take the best binned cpu and gpus you have, make them better by precision lapping, and then use a hot air rework station to replace memory modules with the best binned modules you have tested. I think you’ll break some extreme records doing something like that and it would get tons of views because it’s something interesting that people can’t really do.

[@xizor925]

As much as I agree with you, I also believe this goes against what Jayz's channel is all about. The mantra of, If this idiot can do it, then so can you.

[@fakjbf3129]

Yeah while a glass pane is certainly the most cost effective way to get a very flat surface, actual precision engineered equipment would make a huge difference.

[@joefish6091]

@@fakjbf3129 not alll glass in the same, float glass has a flat side and a not so flat side, true plate glass is ground and polished. mechanics lapping granite is +/-.003, a small machinist surface flat plate is .0001 and better.

[@DZPengu]

A precision ground flat stone would work well enough and be ahead of sandpaper by miles

[@claudekim7876]

U do realize if you cold weld 2 surfaces togather it can ruin the surface right?

[@beef8427]

5:36 When I heard the crunch while he was bending the 3090 my heart almost stopped.

[@kingofangel6275]

Why he do that omg

[@adamweb]

He's just trying to bring back bend test videos!

[@_BangDroid_]

Very weird flex and not okay

[@frederikk.4187]

"Cringing sounds let me try it again" 🤯🤯🤯🙄

[@puffin_time]

IM DED

[@Dreamfuture1]

Everyone: I'll never get my hands on a 3090 Jay: Let's break one EZ!

[@dextrodemon]

I think it would actually work just fine without that capacitor btw

[@SugerFreeJazz]

I'm with @@dextrodemon it was clearly a show capacitor. That's why in always ripping capacitors off my stuff.

[@deansmith4752]

I have never even held a 2 series card...

[@dextrodemon]

@@SugerFreeJazz correct, most capacitors dont do anything theyre just there for show

[@SugerFreeJazz]

@@dextrodemon non critical and for show are two different things.

[@Samixxa]

Jay makes a fairly flat sanding block, proceeds to makes it uneven with scotch tape ..

[@Zebronn97]

I’m fairly sure he used spray adhesive

[@VndNvwYvvSvv]

He said tape, so it's probably double sided. Yeah, it sounds like a pretty bad way to do it

[@Zebronn97]

@@VndNvwYvvSvv he said tape or spray adhesive

[@joehallinan9281]

Tape is actually pretty flat. It’s used for machining all the time for parts that are too thin and/or too delicate to use more conventional fixtures.

[@breeblazevideobrandon3211]

Yeah he did say on the tape 🤦‍♂️

[@Fahrenheit353]

I have a suggestion from a mechanical engineer (love these videos btw). Try using WD40 instead of water when lapping. It will help keep a more even lapped surface with a better finish. I did a bunch of this for parts in the aerospace industry to hit 1/1000 of an inch on tight tolerance parts (a third the thickness of hair). I would also grab a high precision mic (not calipers) and use that to get an idea of how much your removing and try and use a flat surface on the back side as well. If it’s tilted like it appears in the video, that might contribute to the L shape you had when lapping. You don’t really care about the flatness to the silicon but to the die itself so keeping the die flat and supported will help you take material off more even with respect to the die and not the silicon.

[@antiviruz42]

Isnt WD40 a lubricant also? Wouldnt there be some type of flammable lubricant left over any circuitry? Idk what the flash point is for WD40 but that would be cool to use.

[@auros2108]

@@antiviruz42 wd40 is non conductive if this is your point?

[@tarkitarker0815]

@@antiviruz42 wd40 is used for some engines, it can even be used if you run out of motor oil for a very short period of time. plus alcohol cleans of oil without problem....

[@tarkitarker0815]

@@auros2108 no he seriously thinks 1. that the wd40 could be start burning on the card, and that after cleaning the card with alcohol there would be oil left.

[@DZPengu]

The parallelism of the die to the card is irrelevant as long as the die surface is parallel to the mounting face of the pot. With the amount of different components on the back of the card short of making a jig plate for the card you would never be able to achieve getting the card to be flat on the working surface.

[@supersaiyantech9]

Thousands of dollars in PC and filming products, doesn't have a microwave 😂

[@stubones]

Probably, does but heat gun scene makes it "comedy".

[@ayuchanayuko]

And then he'll crash his sensitive extreme OC runs when someone turns on the microwave lololol

[@erggml1887]

Priorities man. Nukerowaves don't overclock.

[@calenelenotso-mau7848]

I saw the heat gun and had to pause the video laughing so hard. Heat gun will work on a can of beans, stirring frequently. 😁

[@hubertnnn]

I expected him to use his GPU to heat the dinner. But the heatgun was fine too.

[@parkerthomas3803]

Bruh. Amazon had a ROG Strix 3090 for msrp for one second before it was gone.

[@GBLecci]

Yeah, I saw it, got the alert took less than seconds and... Gone...

[@honestwork4800]

I tried to buy it lol, I was too slow I guess

[@lk5388]

By the time u get the notification, you are too late.

[@indenkellerag]

This happens when you only look on amazon

[@kenjibaritua9804]

Tru

[@lukethmpsn]

"Perfectly Flat" -Laughs in materials engineer

[@parkermoore7292]

Dislocations are ruining my overclock!

[@kaldo_kaldo]

You're not getting good contact unless you use cold welding.

[@techmantra4521]

Smooth? Laughs in neutron star.

[@davidluptak]

Insert Rick and Morty ultra level meme :D

[@Simon-ph1nf]

@@davidluptak I have ascended

[@NVMDSTEvil]

JAY USE A GLASS CUBE AND SOME GREASE TO VISUALIZE THE FLATNESS OF THE DIE.

[@dollarbill93]

Magic. Literally must happen.

[@dollarbill93]

I'm thinking perspex offcut or similar would still be useful.... but the cube tickles me a special way..... get the cube boys... and an offcut....

[@realfastkx]

I'm a 7min 55seconds into the video and I am very concerned already by the fact that while sanding you were basically doing a circular motion, rather than cutting the die from opposite directions

[@eQui253]

the sentence "I do have another kingpin card." .. that hurts right now.. that really hurts.

[@sogood4u489]

Next time he is going to kill a unicorn.

[@thetaleteller4692]

unicorn blood is said to give another 0.3fps - worth a shoot! xD

[@petediaper]

While overclocking a phoenix with ln2

[@dmitribovski1292]

I hope not they are a protected species.

[@VndNvwYvvSvv]

Such a NFK

[@petenielsen6683]

The unicorn is the national animal of Scotland. So if he is at all Scottish he would mourn the dead unicorn.

[@E.o.N.]

Jay: "Nick get the pot." "the MOUNTING pot" Nick: "hehehehehehe" Didn't know you guys were stoners. haha

[@The_Keeper]

I believe they *are* Californians, sooo... :P

[@MattSpooner69]

I actually lol ed at that one.

[@bofasofa9399]

how is this supposed to be funny? only boomers call weed "pot"

[@MattSpooner69]

@@bofasofa9399 wow what a buzz kill. Have you noticed Jay-z grey hair.. He's not exactly a kid is he

[@E.o.N.]

@@bofasofa9399 You know zoomer, there's different terms for it. You need a better sense of humor. Good day.

[@offstyler]

Jay a few days ago: We don't have enough cards to give away a 3000 series card in the giveaway. Jay today:

[@PhilM4]

I mean he's not wrong. After destroying 3-4 cards he probably doesn't have any extras.

[@SugerFreeJazz]

Gpu protective services needs to step in and find better home for these cards

[@bofasofa9399]

GPU giveaways are a waste of time and hope

[@jamfriday]

5:36 What if the bowing demonstration is what actually broke the card LOL

[@tarkitarker0815]

it pretty much could be that, there was def. plastic being torn apart, if not even copper lanes inside it. the ln2 cooling hurts even intact pcbs much, i think he was just stupid and killed it there. i still dont understand why he uses over 200g of metal pushing down on the chip...

[@tarkitarker0815]

@J G thermal degradation of weakened material isnt just there from 100 to 0 in a second. also it was ultimately killed by jay ripping things of, but look at nick at the end, he had enough of jays shit. :D

[@tarkitarker0815]

@J G ive said he could, not he did. im sure the card would break under ln2 in the near future due to the pcb.

[@kaldo_kaldo]

He didn't bend his Kingpin card, which lost the capacitor.

[@Efreeti]

That wasn't the same card. The 3090 FTW3 is the one he showed bowing on, the 3090 Kingpin is the one he lost the capacitor on.

[@MonygyB]

Am I the only one that was mesmerized by the meaty tires in the back????

[@BradChadley]

Haha definitely not!

[@blackmarketyardsale]

Probably

[@Danimal209]

Not mesmerized, but did notice. Shout out to Jayztwocars

[@TravisFabel]

They look used so I just assumed they were his old rims or something.

[@Knackersjewels]

Pretty sure they're Jays semi slicks for his ZL1

[@MikeZak101]

Nick looks like his losing the will to live

[@gregorywason5471]

Something we do in woodworking that might help is when we’re lapping metal to sharpen blades, we will color in the metal that we’re sharpening with sharpie to see what areas of the blade are getting lapped off. Same when flattening a board. Scribble some pencil onto the board to see if you’re flattening properly.

[@galgrunfeld9954]

Jay's intro be like: "To not go to where no man had already not gone to not before but later!" Inspiring words, Jay.

[@RaimarLunardi]

Back in the mid 2000's lapping was not even a choice, it was a necessity as vapor chamber wasn't around yet... I lapped my Duron 1.3Ghz and an "all copper" cooler I had. Temps went 15°C lower.

[@codfish1113]

Last time I was this early, CPUs haven't reached 100mhz yet.

[@TravisFabel]

Buh-duh-da-ding! Intel inside. Pentium!

[@flozam5468]

Hey Jay... Been watching all you XOC legends ( thats right i consider you just as capable as the others ) from the point when you and Steve first jumped in the ring... I really enjoy the way you've made all your own experiences into lessons. Something came to mind when i saw the pitting after your mount on the lap die. What if the thermal paste is getting micro bubbles in it, causing those sections of the die to reach extreme temps in an instant and damaging the surface. had a quick google and found this in regards to "how to remove micro bubbles from paste": - Use centrifuge and vacuum. After mixing, do centrifuge at high speed, then place in vacuum, then repeat the steps if needed to remove all the bubbles. Big-size bubbles will be remove by centrifuge and small ones by vacuum. Its a pretty extreme step, but if you find someone with some lab tech, maybe it'll give you the edge... It may be worth looking into moisture (H20) content of the paste as well.. Keep up the good work bud...

[@DarthZackTheFirstI]

15:50 that dude in the background is perfect for memes like "holy cow i try to get one for months and you destroy them on a daily base"

[@Xilent1]

He let Jay borrow it and he broke, then told him to fix it. LOL

[@JoeSmith-bu1my]

Tape around edges to stop fine metal from going everywhere. Next use a dine small lapping stone or fine sharpening tape mounted on glass. Protecting the surrounding area from the fine metal removed is extremely important

[@enesbaturvideolari6237]

FBC14 algorithm is my choice, i dont worry about BTC rates at all

[@Cryocide]

Pro tip from old school optical fiber polishing: polish in a figure 8 pattern. You'll have less work to do to remove the straight lines gouged by the abrasive grains.

[@charmingwrath4835]

Another month still no 3080 :(

[@loquacious1956]

Feel your pain, another month and I still do not have my 5900X I ordered on launch day!!!

[@Squishmallows24]

the pain will continue

[@tysonfraess]

Hit up the Newegg drops. I copped a 3080 strix with no combo. Just gotta be quick.

[@ryanmcgowan3061]

Try silver plating one or both of the contact surfaces. Silver is more thermally conductive than copper. You can check true flatness with a small piece of glass. Glass is as near flat as you will get due to the manufacturing process. Low viscosity/low surface tension fluids like acetone or methyl alcohol sandwiched between two surfaces will maintain capillary contact between the surfaces where they are closest, and with glass, you can easily see it. This includes checking two pieces of glass for flaws. Moving and rotating the pieces reveals flaws because the liquid "sticks" with the piece containing the flaw.

[@adithyaprasadhs3199]

i was expecting an i fixit ad

[@ForzaS1]

I think the best part in this video was seeing nic in the background with the look of disappointment xD

[@PhysiqueGeek]

15:50 Nick looks like he's so done with everything lol. Great video Jay, you'll beat that score one of these days

[@tomb3782]

Jay: "...I'm not going to solder this on..." Louis Rossmann: Sigh, thank you!

[@unfunf22]

he would immediately loosing his mind

[@S8ER]

Jays over here breaking cards and I still can’t get one. #jelly

[@takeawaykitty.]

Use fine valve grinding compound in a figure 8 on cold plates or anything you want flat. Then use fine 1500+ polishing paper to get the desired surface finish. I noticed a more consistent hight center to edge using a dial indicator.

[@G0nZ4Low]

"we don't have a microwave" Me: THIS IS IT, HE'S GONNA USE THE TORCH Jay: *uses heat gun* Me: *disappointed*

[@Khunvyel]

My thoughts exactly :)

[@Deathend]

Jay: I figured out how to lap this perfectly. Jay: I lapped it perfectly! Jay: I broke it undoing a screw. 10/10 It's like a NASCAR driver winning the race and then crashing into a wall because they forgot about the brakes.

[@Matthew_Lang]

This is slowly turning into JayzLN2Cents. Not that its a bad thing. Thank you for taking us along for the ride, and showing us what can happen. Weather that is something good or bad, its all part of the journey. Keep going, Jay!

[@DREAD69XI]

3:47 NICK CAN YOU GO GRAB THE POT!

[@markmattheviewable]

Watching this has cured me of my anxiety I get when leveling frets on my guitars. At least on those I can get new frets when I screw up. This though... hooboy.

[@DaedalusRaistlin]

Frets are also slightly cheaper.

[@THEGREENHELIUM]

I’m sure you mean well. However this isn’t even close.

[@Jay_the_Caffeinator]

Jay this was awesomesauce to watch. It gets my heat transfer equations rolling through my head. It's all about how efficient you can make the heat transfer. When I would go underway back in my active duty days, the colder the ocean water the more potable water we could make in our 100K gallon/day distillers. Also our main engines could be way more efficient! You can really see why the Nimitz class aircraft carriers were built for cold war era and not the middle east ocean water. Keep the science going my friend! (We might be around the same age? [About to be 48]).

[@kapand5051]

is there really still a person who does not know about the existence of FBC14 algorithm?

[@justrandom4924]

Damn 2:20 , I was expecting pun "This the DYE and if something goes wrong, gpu will DIE"

[@Salty.Peasants]

Copped me a Rog Strix 3090 OC Edition yesterday on amazon. Finally beat the bots after 10 minutes straight of spamming. ETA: March 19 :(

[@MissCloud9]

Nice. Have a 3060 TI nabbed end of last month ETA: Feb. 18 . You go from being happy to get the card order to having to wait on the card.

[@Salty.Peasants]

​@@MissCloud9 ETA was changed from March 26 to Tuesday :)

[@AngelLuisTrinidad]

From what I see from the thermal paste that didn't cover all edges , tells me that I'm right spreading the paste, instead to just applying a pea size dot in the middle and not spreading it.

[@Chris173972]

I'd be scared doing that with such an impossible to get hold of GPU. Bravo!

[@Chris173972]

Just seen the end. It happens. Just something to learn from 😔

[@evo7836]

I know the feeling, i did the exact same thing taking apart a cooler on a 1070 FE to put a water block on years ago, returned it to where I bought it for an exchange lmao.

[@mohamadmalullah]

So Louis Rossmann is getting a call soon?!! lol

[@stoneymahoney9106]

If we get a second Louis reaction video to Jay's repair techniques, that'll be enough

[@mohamadmalullah]

@@stoneymahoney9106 I wonder when Jay will ever learn his lesson lmao

[@stoneymahoney9106]

@@mohamadmalullah Not too quickly, I hope. If we can get a few more "...NO!...", "It's not fair!" and "HEAT THE FRICKIN' BOARD!" reactions from Louis first, THEN send him to a night class on soldering ;)

[@mohamadmalullah]

@@stoneymahoney9106 Oh, yes, I almost forgot how priceless Louis frustration is when watching these types of things... 😂

[@michaelthompson9798]

I would love to see Jay grab the KP 3090 and snap the pcb 🤯🤦‍♂️

[@OneQuarterLife]

"ooh that crunchy sound" K E E P S D O I N G I T

[@MojojoJenkins]

Loving all the lapping and modding content lately, Jay and team! Keep it up!

[@realfastkx]

Don't sand in circular patterns!!! lol

[@TWalsh2]

Use mercury as thermal paste. It'll freeze at -38 but the heat from the die should keep it liquid for good heat transfer. Just don't breath any fumes.

[@redzak90]

14:50 i'm like "hey i know that waterbottle"... waiting curiously on the add ... guess i'm used to it to much :D

[@dc4851]

When he calls a resistor a capacitor

[@stinky817]

You noticed that too huh?

[@NeverSeb]

All gamers want a 3090/3080 and cant get one.... Jay:" Oh, I broke another 3090... No Problem I have more!" xD

[@MrSmith-rk4jq]

3090's are in stock lots of places cuz no one wants to pay for them lol

[@TheNubaHS]

I was watching one of TecLab's HOF OCing vids, they literally PILE the dead cards bro, jay is extremely conservative

[@NeverSeb]

@@TheNubaHS true, but still funny. ^^

[@bhollingsworth]

Funny isn’t it ?

[@dbadaddy7386]

The rest of us can't get any 30XXs, Jay has enough he can afford to break them.

[@JMUDoc]

"I'm NEVER doing these xOC videos again!" _five xOC videos later..._ "OK - so now I lapping my fucking dies..."

[@VashTS21]

theoretically if both surfaces are as flat has possible you would not need thermal paste. to know for sure they are flat as possible there would be a surface tension effect where they "stick' together.

[@terakahn]

When he bent the card and it made that cracking sound, my heart stopped lol

[@basshead.]

Why? it's not your GPU.

[@terakahn]

@@basshead. so I can't have any feelings about it?

[@basshead.]

@@terakahn Worry about your own things, not some stranger's things on KZbin. Not healthy, bro.

[@vallsz]

"i believe my mic interfere with the card", literally knock up a resistance out of card 2 sec after "this will get repair eazy"

[@riccardomarcenta]

next video:"i soldered the pot to the die"

[@radicalxedward8047]

I didn’t think flatness measuring tools were that expensive. Your finger can’t actually judge smoothness at the levels you can achieve.

[@michaelhughes9278]

I was interested in your cooking methods here, exactly how long did you hold the heat gun to the rabbit food until it was edible for the average human?

[@kirkyorg7654]

the double sided tape wont stay flat as you sand it will give in different places very light spray of adhesive would be best i think from my experience with double sided tape

[@nick_bag]

when you pulled out the heat gun to warm up your lunch, thats how i knew you really are a car guy. We can all relate.

[@ethzero]

Permanently trashes a GPU for temporary OC gain. Genius.

[@mistermena8204]

jay breaks a 3090. on camera they look stressed. off camera they laugh open a bottle of jameson and open one of their backups.

[@WarPigstheHun]

Do a plastic molding first. Then create a heatsink accounting for the raised letters.

[@snarfy6415]

This all feels so wrong

[@shadowopsairman1583]

Die or ihs, i wont lap, only the HS i will lap, the thermal compounds take care of the rest. No need to polish anything either

[@TravisFabel]

as somebody that knows slightly more than Jay about polishing something completely flat, this is so frustrating to watch because there's so much that I would consider wrong but this is pre-recorded and I can't give any feedback that matters.

[@blubblubee]

Your videos are actually way more informative than Linus. Everything Linus does is like a commercial but you explore some really interesting tech avenues

[@guillaumejoop6437]

Didn't it occur to anyone that the die itself could be soldered slightly crooked on the board ?

[@kaldo_kaldo]

Could very well be, but for mounting the hardware it needs to be parallel to the board either way. It's closer to that now.

[@gurkiratsingh8747]

What happened to the giveaway? Still no announcement on the givewaway page, it's already over but no announcement.

[@emu071981]

Which giveaway are you talking about? The GPU one still has 23 days left on it.

[@gurkiratsingh8747]

@@emu071981 There was one before it, which ended long time ago.

[@danecarpenter8735]

get a lapping plate, or a Granite surface plate. Much better for lapping. Or at the very least get 12in x 12in Granite tile from the hardware store for lapping. Much thicker and less likely to flex.

[@justint.6618]

No ifixit ad? Disappointed, also lapping a 3090? you're brave!

[@admiralcoffeemaker6310]

first reply

[@robertdebard3179]

when i used to actually work in an office, i'd use my heatgun to heat up my bagels. great for crispy outside, soft inside

[@Zeph0]

I managed to get a 6800xt without much effort a few days ago, i feel like i've won the lottery

[@cellanjones28]

Found one myself but is £895, so figured no lol

[@Zeph0]

@@cellanjones28 i found it for msrp somehow lol

[@cellanjones28]

@@Zeph0 nice, I would need to win the lottery to buy the one I saw. Its the only place in the UK I've seen with any in stock lol

[@hotrod6919]

Looks to easy! You should try lapping a set of iron Big Block Chevy Heads, I wonder if a final Lapping or polish with news paper may make some difference like A;lot of old school race engine builders do with bearings?

[@domgag1756]

heat the card !

[@charlesswhitlock]

Why not get a 10,000 grit sharpening stone and use it. The are flat when new and won't leave grooves and scratches.

[@dustinthomas2998]

That one cap wont hurt your performance, just check your resistance to ground to be sure there isnt a short and bench away

[@calyodelphi124]

It really depends on what purpose that cap serves. On the back side of the card, right next/under to where the GPU is located, that's going to be a noise decoupling capacitor for the GPU, which could potentially have an impact, even if subtle or minute. Decoupling caps need to be positioned as close as physically possible to whatever input or output it is they're decoupling so that you have the absolute minimum uncoupled induced signal noise on that input/output.

[@ramonzaions7522]

TEST RX 6900XT WITH WATERBLOCK AND OC PLEASE!

[@whatskraken3886]

WHY

[@ramonzaions7522]

@@whatskraken3886 I Gonna Buy!

[@whatskraken3886]

@@ramonzaions7522 i glad you buy

[@ramonzaions7522]

@@whatskraken3886$2000

[@raul1899]

Phil's face in the end like: "Why are we still here..." You know how the rest goes.

[@leereynolds2927]

Not like there's a shortage of cards or anything.

[@kaldo_kaldo]

One card or even ten cards isn't going to change anything. You're thinking you'd get the card but that's ten cards to millions of people - it makes no difference to anyone but Jay.

[@shadowhawk320]

I don't like this misuse of terminology. You are sanding the die, not lapping it.

[@sleedog11]

Lapping is removing the top layer of a surface sanding is a method for reducing the top layer of the surface he could have used a liquid abrasive or polish then it would be closer to the dictionary definition but they are essentially the same. Chill

[@shadowhawk320]

@@sleedog11 I'm sorry you feel that way. I work with extremely tight tolerances, and in my world comparing lapping to sanding is like comparing a B52 Bomber to an F1 Race Car. They just aren't the same.

[@siccreations1287]

When lapping NEVER go in circles( wax on wax off is wrong!!!) ALAWAYS do a X or + pattern and always do a even number of storks in each direction. I have been lapping stuff for over 20 years...so I know a little ;)

[@unsettled_5]

Jesus said to him, “I am the way, and the truth, and the life. No one comes to the Father except through me.(John 14:6)

[@drawapretzel6003]

i paused, right after the b roll of the runs started, and went and checked the hall of fame, and saw it was the same literally said to myself, oh no, he broke it and unpaused, and you broke it. RIP

[@goonmandu]

When he bent that card I literally gasped.

[@originalKashman-pg1kz]

It always boggles me, strip a card down to its bone and realize this is what I’m spending all this money on.

[@benjacmarshall1153]

I hate tech people doing anything with any kind of tool, it’s so scary man. PLEASE STOP

[@Xyler94]

And lose out on fun content to watch? Are you crazy? The tech gore is fun to watch :3

[@awilliams1701]

I get why most GPUs aren't lapped, but it seems like kingpin cards should be.

[@eliasgamezgarcia3414]

Aaaaaand that's it, everyone trying to find one miserable gpu and Jays says look i do have more than one 3090 sooooo lets do lapping on one that costs more than the most average entire pc gaming. Nice video btw

[@Gruxxan]

jayztwocents: fucking things up so you dont have to

[@DMAN5970]

jay i really do recommend a torque wrench sort of thing for even pressure fyi it will help

[@David73977]

Jay you need a KFC PC for your lunches. By the time you are done with these videos we all are going to be experts on LN2.

[@suryatamasinggih574]

Jay really are very talented at making horror movies... 🤣