I tested 5 Second fix, this is what happened.

you can get a shirt here : teespring.com/....
My equipment
Main camera : amzn.to/2ofDDJF
Second camera : amzn.to/2Nt9mlC
The mic i use : amzn.to/2BZrAcO
The tripod i use : amzn.to/2LuaGCF

[@bakedlights]

Maybe the 5 second fix means it only works for 5 seconds.

[@jessveness]

And exactly 5 seconds.

[@owah]

Only 5 seconds

[@GeartoxGD]

lol

[@SYKOTHEGOAT]

:0

[@lordcrayzar]

Doesn’t even hold 5 seconds

[@deertay7071]

That is probably the most pathetic glue I’ve ever saw my life

[@undead_siege_1493]

Seen*

[@joelek6073]

Seen in*

[@nathanconley2726]

Seent'ed*

[@cginclude]

Sont**

[@Drousee6]

*Sawded**

[@sim9454]

This channel is so pure

[@ytParadarx]

Very true, except this video where his shirt says to shove your opinion up your *ss 😂

[@RyukyuStyle]

@@ytParadarx that what makes it the purest

[@KoiMan_]

'I'll be back in 15 to 20 minutes' 'so guys, it's been 7 weeks...'

[@prodTyeDye]

Your videos are actually quality content and love to watch them wanted to say thanks and keep up the good work

[@CrazyCaliforniaFishing]

Hey Guys I am a fairly new channel can you check it out and leave some feedback good or bad. Thank You! Also 3 Giveaways At 1,000 Subscribers!

[@tylerallen8900]

@@CrazyCaliforniaFishing Feedback:

[@matthewlg03]

@@CrazyCaliforniaFishing big oof

[@420fishing6]

@@CrazyCaliforniaFishing well you aint doin a giveaway are ya lol

[@timsawyer9231]

"Actually quality content" haha It's a compliment with a slight jab in there. "You don't look like you'd have good content, but to my surprise it's pretty alright, you may continue." hahaha

[@Josh-lz3xo]

I wish I could get my fix in five seconds..

[@nicholegallo1664]

Josh 😂😂

[@mralt5419]

Try LineX the UNBREAKABLE SPRAY

[@d3ad.4gain]

KZbin Fanatic pffffft

[@johngeske1829]

I mean unbreakable is a bit far you can stab through it pretty well

[@Echorser]

John Geske It’s meant to be blunt force protection that’s why

[@johngeske1829]

@@Echorser I know

[@mysteriousdisappearance]

You have to find a business that will spray it for you, last I checked, its not available to the general public

[@user-hw4vf2sf9r]

I clicked in 5 seconds here’s what happened

[@N00BST3RS]

5 likes!!!

[@CrisStan]

It got *"StUcK"*

[@diamondslimerlive1267]

This to wasnt happen supposed

[@chelseagruenwald]

why am i here watching videos about glue? 😂

[@TylerTube]

Flame thrower video in 10 minutes!

[@chelseagruenwald]

TylerTube i literally just watched like 9 of your videos about glue 😂 idk how i got here

[@ademolaadesanya7929]

Gone camping Me: damn I forgot my fire starter Friend: don’t worry I have my 5 second fix Me:🙃 Friend:👌🔥 Me:🤯

[@strawberrycoolatta]

Ademola Adesanya What does 🙃 mean

[@ademolaadesanya7929]

Xx That One Potato That You Saw xX confusions

[@sigh8362]

5 second fix worked on my marriage you must be using it wrong

[@extermenator11]

Oh yeah yeah

[@sigh8362]

Oh yeah yeah

[@bluey_heeler]

How long? 5 seconds

[@wunnaboy]

8:47 wait wasn’t that the table he had before?

[@Mike_hockslittle]

Yeah the table that wasn't broken lmao 😂😂😂

[@damianqualls5142]

He has multiple

[@Benjamin_Reese]

You have to hold the light almost in contact with the glue for it to harden properly. It's still not as strong as super glue but works better. You do need to be able to have the glue in a visible area for the light to penetrate the glue. The Lazer Bond I have seems to work better than that stuff though.

[@ananthropomorphictalkinggo6641]

Him using stuff incorrectly has to be intentional at this point.

[@woodworkingandepoxy643]

So you're only supposed to glue plexiglass or something else that's clear

[@Benjamin_Reese]

@@woodworkingandepoxy643 mostly there needs to be at least an edge of the UV resin visible/exposed and the portion not exposed can't be too deep/wide. So glueing 2 sheets of anything isn't likely to work well. 😂

[@ksjdkdj5133]

Hey Tyler, I have been absolutely loving you channel. Not only is your content very interesting but you don’t use clickbait at all and always get straight to the point. You’re also a pretty funny guy and much more genuine than any other KZbinrs and I love that! Awesome to see you channel growing and I know it will continue to do so, keep up the great work!

[@za4310]

It's insane how entertaining it is to watch you review glue products.

[@suzz1776]

Ikr

[@SamSam-yf2xj]

Started binging your videos a couple days ago so I had to drop a sub

[@Ambertheone17]

Is it just me or is this man so relaxing to watch even though he is just glueing things together 😂😂🤷🏼‍♀️🤷🏼‍♀️

[@hollyl9151]

Lol yes!!!

[@stars4finny]

I got recommended the mixing all the glues and I thought it was weird but interesting but now I really like your videos and I subscribed with notifications on you deserve more subscribers you have an amazing personality and I think your really funny

[@johnpittman7908]

5 second fix works perfectly fine and yes....yes I was paid to say that

[@BDGilly1990]

I've been subscribed since this video. You've come a long way, my friend .

[@UnknownUser-lo1yg]

1:26 Tyler: we can all count Me: 1 3 6 4 1 8 0 6 4 6 28 I can count?!

[@mralt5419]

Thumbnail and I didn't expect this to happen YOU DIDN'T EXPECT YOURSELF TO SET SOMETHING ON FIRE HWO DO THINK YOU ARE

[@NoizeTunerzMedia]

TYLER you need to do solutions like that more often, had a feeling of where this glue test was going, but the solution with the blowtorch and the steps just before with your serious expression literally made my day😂😂

[@TruthArrows]

This is actually a plastic that hardens when exposed to UV light. UV light cannot penetrate wood, the light has to shine on to the liquid plastic.

[@A.Broken.Arrow.]

Looking fit, and your beard looks nice. Keep up the awesome videos, my guy Edit: UV light won't penetrate anything. Infrared will, but plastic and glass will stop UV from going anywhere. 5 Second Fix seems... meh.

[@jackkorson7534]

Congrats on 100k!

[@macD723]

The glue only works when the light can hit it. The sticks were covering most of the glue.

[@johnv6806]

Makes it kinda useless as a glue

[@16Craft82]

John V right? What are we supposed to even use this stuff on if it has to be clear?

[@WilhelmWilder]

Tyler you my friend are.a five second fix...💜💙💛 love ya man I subbed at 1,000 glad to see how big you're channel is growing you're a cool dude

[@eyk558]

Tyler, you are my littler favorite youtuber since I found your videos in my feed. God Bless, and God Bless America

[@whocares6698]

He actually looks like a big guy, probably at least 6ft I dont think he is that LITTLER.

[@eyk558]

@@whocares6698 I meant litteraly

[@whocares6698]

@@eyk558 I think you mean LITERALLY

[@TheResistorNetwork]

it's happening! Subscriber count seems to be going up fast. Go Tyler!

[@kalazakan]

In case anyone is wondering, the song at the end is "GE0RGE - The Movies". Searching for it on Google will just give you George Clooney, so instead type (GE0RGE the movies -"george clooney") without the parentheses and you'll find him. P.S: A hyphen before a quote will omit a specific keyword from appearing in your search results.

[@danielisthebest]

thanks, I was so confused when I looked it up because I didn't want George Clooney

[@williamvouk2911]

The instructions clearly say “be sure that you also use a completely different brand of super glue and let that cure for the recommended time in order for 5 second fix to work properly”

[@trezxx]

I saw your channel in my recommended feed and I want to say your videos are actually entertaining.

[@BladerBP146]

This is for like hard fake plants where the edges could break from a fall or something like that, works perfectly fine for stuff like that and is practically invisible. It’s meant for quick touch ups, not flexing or holding things that are going to be under stress

[@popper1736]

Such a great channel

[@hussssshie]

This glue is really useful to replace screens on smartphones, in 10 seconds it's fully cured and waterproof if you've done it right. But I really never tried to use the LED UV light it usually comes with, I use a big UV lamp. LEDs can't produce high amounts of UV.

[@deezytherunt4639]

I'm here for the fire

[@dmanhd143]

YAY!!! 100,000 Subs! Congrats!!!

[@chrisboy8708]

Have you ever wanted to fix something in EXACTLY 5 SECONDS AND NO MORE, then your in luck

[@_Katzeri]

chris boy no such thing as a exact second. Milliseconds and microseconds;/

[@chrisboy8708]

@@_Katzeri No is it is a nano second over it isn't true to the name

[@chrisboy8708]

@@_Katzeri btw it called 5.000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 seconds

[@jessveness]

and no less

[@debmalyorudrasarma2747]

You deserve to get 10 million subscribers...Keep up the good work!

[@bulletsun1340]

What would happen if you burned every glue together

[@d3ad.4gain]

Jordan Mills 1980: we’ll have flying cars by 2018!! 2018: *this comment exists*

[@nabilaaslam8126]

Whole lotta pollution and black smoke

[@Forasken]

ShadowCuber34x oof

[@mrjohnnybean7936]

Congrats on 100k, keep up the good content :)

[@shapeofunnenjoyer9690]

Can you please put the songs you use in the description? It would be a pretty nice and convenient thing.

[@TheAllyGD]

addison santos and good to credit the artists!

[@soulwarriorwithn]

Check out @Kalazakan comment. They show you the name of the song and how to find it.

[@abcdef-px7ix]

I went and found some links for you if you want to listen to the artist. Here they are Deezer: www.deezer.com/us/album/75901012 Spotify: open.spotify.com/album/7yJ3E8a5DiYsGeEDQRskbN Amazon: www.amazon.com/Movies-GE0RGE/dp/B07JH7BCG8 Google Play: play.google.com/store/music/album/GE0RGE_The_Movies?id=Biabnrimkr2a4kfkr5lfzzbvteu Shazam: www.shazam.com/gb/track/444286977/the-movies (some of these links are paid websites which supports the artist.) Thanks to Kalazakan who found out the name of the song is GE0RGE - The Movies however if you want to search it you have to copy paste this into google: (GE0RGE the movies -"george clooney")

[@Rochesteradventures4870]

Ive actually used the light stick glue and as long as you have the glue entirely exposed to the light it works pretty well. It's good for holding arts and crafts together while you apply better support. It's like having a third hand for instance.

[@HonARGUru]

This To Wasn't Happen Supposed....great video man keep it up cheers!

[@ninjagodzzx2329]

You are a great KZbin and you never fail to make me laugh you are very helpful with this God awful depression I'm going through

[@JUGGALOMADNESS]

Yeah how come it starts fires but it cant glue anything 🤔🤔🤔

[@chelswats3614]

It needs to be used on transparent surfaces. It has to be able to penetrate through whatever you are fixing. It actually works fairly well as long as you read and follow the directions!

[@NibbleMeTwice]

Thank you. I wanted to say this but was reluctant due to the lateness of my comment.

[@odogsyverda5950]

You are my favorite KZbin you make really good videos

[@eggfooyoung24]

Most Loctite's that have the spray activator are pretty good for a near instant tough bond.

[@delbertj.6961]

I have used this stuff before and you made a couple of mistakes when using it. Number one the light needed to be a inch or less from the glue to harden it. You also need to use a good amount of glue. It is good for stopping leaks

[@Gondryn]

I’ve used 5 second fix on a pair of glasses and it was able to fix the arm. Good and strong going on 6 months. But of course I coated the outside of the break in the glue, after it dried it was hard.

[@benjamenYTDeadTheGamer]

How those glasses holding up?

[@Gondryn]

@@benjamenYTDeadTheGamer honestly, I think the glue was harder than the plastic. From what I remember about it, I had to use a lot, in the end saved money on a new pair of glasses. If your willing to put in the extra time to make the glue hold, then I think it would be worth it.

[@joshherrera4814]

Or just buy gorilla glue and wait 15 secs with no light and still work way better..:.

[@pavelsprojectfilms]

I had a wooden clock with glass in it that fell off the wall face down on the floor. I thought that glass was shattered all over the floor, I pick it up and was surprised that at least the top part not a single crack anywhere, only the bottom part crashed. The glass at the bottom was broken in a few pieces, so I tried to glue pieces together using 5 second fix with a UV light and it worked, I just let it be glued together, didn’t bother braking it again.

[@yourson9664]

Ive found out it works amazing on glass

[@JoshC03]

Really?

[@yourson9664]

Had to fix my pipe somehow man.

[@MrPumponer]

This stuff reminds me of what they use in dentist offices, the dentist uses a way bigger light and holds it on for way longer than 5 seconds.

[@CollinTheSav]

"No views" several people have already seen this. Thanks, KZbin bugs.

[@didsicle7242]

You have to put the light closer, and you have to be able to put light directly on the wet glue. Otherwise it will stay wet. It works good on certain things but is not a fix all. I have used it on plastic car pannels and it worked well.

[@or4]

17 dislikes are jealous of his beard

[@jacobacon3219]

Well, firstly this is a UV cure plastic. Only ultraviolet light will harden it, (perhaps there is a catalyst that could be used but I digress), and if the light can not touch the liquid it will not harden. This also means that even too thick a layer will have trouble curing, especially with such a weak light. All that being said 5 minute epoxy blows this stuff out of the water.

[@ssm3602]

Nice video, wrote this in 5 seconds btw

[@joshoduwole]

Your channel is growing so fast bro! On the road to 200k!

[@bulletsun1340]

It only works if the light comes in direct contact with with the glue

[@disso42]

Well how do you do that without ruining the point of it being a glue? Oh wait...

[@ComicKodi]

I’m a year late but that’s the perfect song choice. Bravo. 😂 (while gluing the spoon back together)

[@jxi5671]

What happened to the non clickbait titles

[@kumd]

Jon Irvine Yea no shit, how irritating. If this is the future of his channel I’m unsubbing.

[@jxi5671]

Captain Sparks yeah I’ll be out too

[@among-us-99999]

He is just on the border. I am not willing to subscribe, but I am not yet ready to dislike his videos.

[@jxi5671]

dontlikemath -.- a couple of videos ago he said we didn’t wana be a clickbaiter but I guess fame and numbers change people

[@leqchumain9425]

“Blah Blah Blah we can all count” it actually made me laugh XD very nice vidéo dude I love yours works on YT! Keep it up!

[@D3ATHCOR3_DAD]

00f what a way to clickbait

[@OneKnifeYeHand]

This does work. Not sure about the US, but in my country, dentists use this glue+UV light to glue fixtures or braces or anything that needs to stick to your teeth and it sticks for months on end, sometimes a few years. You have to hold the light very close to the glue, though.

[@justinshanner5121]

95k

[@mikecowan5786]

Tyler Because right now as far as 5second fix is concerned I wouldn't pay more than 50cents for this stuff. Made my day

[@donaldeklund935]

I like your channel you are yourself no lame ass lingo no stupid trendy shit you tell it show it how it is. Thank you Tyler for good KZbin.

[@ThePamelaJordan]

Ok... I’m glad I saw this. I picked it up recently but this is going right back to the store.

[@jameswalsh6810]

The 5 second fix works for me. Used it for a temp solder .. Still holding up this day..

[@geoffmayo2158]

Used the correct way it's the best glue I've ever used especially on my handmade fishing lures

[@jasonson2007]

I would say the advertisement is misleading. I've used it quite a bit in various crafts but 5 seconds I would describe as more of a set time not a workable time. The UV light is also weak as you get better results holding it right up to the glue. I use it mostly on repairing my daughter's doll jewelry not recommend for fixing something that should be epoxied or welded. Thanks for the video!

[@apersonthatwatchesyoutube2676]

Dang you’re so close to 100 thousand keep up the amazing stuff

[@Grimzonix]

Idk how long ago you hit 100k hopefully just recently but congratulations dude!

[@redflag2655]

Tyler tube I love your videos keep up the good work I hope you reach 1 mil subs

[@raisinbrahms5872]

I'm pretty sure that you have to have the little uv flashlight touching the surface to get the full effect. Because they use a similar solution on braces, and they put the uv light directly on the glue.

[@benvirgulak322]

Tyler your one of the best youtubers around keep up the great work

[@artichokedipp]

Love your channel, keep the good work up!

[@Wisherson]

Me: reads title My brain: This to wasn't happen supposed

[@l1ghtlys4lt3d5]

Fr tho I love this channel, great content and affordable merch all in one place

[@jdizzforyou]

The title was a little clickbaitish. After saying that, I am definitely not disappointed after watching! 5 second fix is an extremely brittle UV curing epoxy that needs a thin layer as the UV light necessary to cure cannot penetrate the cured version leaving uncured epoxy surrounded by a thin layer of cured. I've tried bigger UV lamps with the same results, just quicker failure. You should test baking soda cured super glue! It has similar limitations but it's more useful than 5 secondish almost fix. Great vids! Edit: Don't ya hate it when you realize the last comment was a year ago? Smh

[@cristianortizhenderson5517]

I love ur videos. Also please go and make more merch. I loved the first one

[@vubur7742]

This guy is SERIOUS about his glue.

[@zachb4035]

I've used this stuff a bunch of times works well on plastic like cracks in the dash to at least smooth it out not a strong glue yes but it does serve a purpose the product that I buy states on the package not a glue but a crack weld

[@chrisakaschulbus4903]

that glue reminds me of my visit to the dentist... to protect the "groove" on my back teeth they put something in there and cured it with an UV-light... but believe me, it was definitely stronger than that stuff shown in the video :D

[@cherylalikhani5957]

I can think of one use for it. Use it to cover rough edges in smaller resin works.

[@titan_gamer2549]

Agreed to all up most quality content. Man I love ur channel

[@sissausbug]

Yessss, as much as I don’t condone melting plastic (chemicals and such) , my urge to destroy things that are garbage was satisfied.

[@asapzyzz]

Tyler correcting the products, 20 minute fix!

[@jacobjupiter7812]

That video did not feel like 10 minutes but still loved it

[@TheHunter0199]

Congrats on 100k my dude

[@thermite1277]

I am thinking about making a glue joke but I am pretty stuck

[@paraupnext4989]

Omg lol wtf (cringe)

[@lucusloc]

That stuff is a UV set epoxy. It will not set up unless the UV light can shine on the glue itself. Of course this means that it would not set at all between wood sticks, as no light can pass through them. But even the clear plastic spoon test may not be be that great because not all "clear" plastics are actually clear to UV light. Most clear plastic spoons are made from polypropylene, which typically is fairly opaque to most UV light. For a penetrating join UV set epoxy is typically used on glass, and when it is used on UV opaque objects it can only be used as a surface join (for example: painted over a crack in a material). Obviously surface joins are not really structural, but could be used for things like waterproofing so long as the crack is not under mechanical strain. Additionally most epoxies do not form a chemical bond with the substrate material, so their holding power is limited to the mechanical friction between the glue and the bonded material. Smooth materials obviously offer little friction and so generate poor bonds. If you want a strong bond you must first rough up the surface so the epoxy has something to grab onto, and you may need to apply multiple layers to get sufficient strength for something that will experience actual strain. The applications shown in this video are not really within the proper use cases for UV set epoxy. By all means test the stuff for other applications, but you should research and test the actual proper applications for the adhesives before you throw them out. That would at least give people who see your videos a fair idea of what the products do, rather than calling it garbage for being unable to perform a job it was never intended for. If you want to test the mechanical holding power of UV epoxy you should really tests its ability on two pieces of frosted glass. The glass will be transparent to UV ensuring complete curing of the epoxy, and the texture from the frosting should provide lots of mechanical grip. Of course when doing that test you should realize that UV set epoxy was never designed to win any holding power competitions, so you should set your expectations accordingly. Or you could just test if for what most people familiar with the stuff use it for: fixing small leaks in aquariums or desk fountains, or for low strain applications like holding broken knickknacks together. It was designed for convenience over durability. The tests you put it through showed no awareness of that fact, and were completely unfair to the product for that reason. It's equivalent to taking some wood glue and smearing it between two hunks of metal, then complaining that it did not hold as well as a weld joint. It is the wrong application and wrong expectations, and therefor the conclusion is completely invalid.

[@DragonGateDesign]

I've used something just like this it works well enough. Probably depends on brand, It's a uv reactivate epoxy, same stuff used on nails

[@DragonGateDesign]

Can't cure if the UV light can't reach it

[@vibemusic982]

This channel is the best its just so content, maybe it was to bright in the room? Yet again the torch did its job in the light.

[@TaylorComisky]

Well now I know I can’t use this on my emotions

[@cosmiccatlord4902]

I love your videos keep doing what your doing I'm a big fan of the glue test and hope you make more cool vids to watch I know they take a lot of time to make but I still enjoy them best regards Manuel Romero be well 👍