I Tested The 10 Best Headphones ($50 to $150)

[@inthemix]

I just made an updated video ($150-300) here: kzbin.info/www/bejne/noqZoZ6lltyMibs

[@pixssassin]

what abt akg k92

[@stanisawszczypua9076]

All you said about AKG K240 I noticed from personal experience.... when I used them on sound source that was not powerful enough! After pluging them to FiiO K5 amp (it delivers ~1W @ 32 ohm ) K240 change drastically for the better in all aspects. On paper they shouldn't be that power hungry but believe me they are. Sony MDR-7506 are probably the most counterfeited headphones on the market. Maybe you get fake ones.

[@FoalysPub]

(@inthemix ) as someone who has had 4 sets of The m40x (all have failed the same way) the biggest issue with them is they almost always brake right at the arm joint between arm fold pivot that connects the arm to the swivel not to mention finding replacement arms for them you have to go to a specific website that sells the arm replacements (they sell both sides seperatly for 15$ each as of a year ago) and not amazon as you would find for the m50x's There is no tutorials on how to do the swap (you have to Desodder the headphone wires from the boards and re fish the wires and resodder the wires back to the headphone board and its a pain in the butt trust me i've done it 2x on two sets) I managed to do it using the same sodder how ever I was also using a map torch and some fine craft picks to remove the wires from the headphone boards... once you get them off its just a matter of not braking the arms getting the new ones on (its a struggle and you will need some force but not a ton) then the hard part is fishing the whole arm assembly back through it goes from the band through swivel and fold joint arm assembly banks a 90 turn through the pivot and along the arm and then again through a hole in one the arm connection... If you do open them to replace the arm I recommend hot glue to hold the wire so you can re sodder if you don't have any good way of holding it all in place...

[@schbrenner]

please advise, I'm thinking between dt 240 pro and 770 PRO (32ohm)? I would use them for video editing on a laptop (macbook 13 m1 2020) Thank you 🙏

[@mV1o3o]

Dude. You‘re a blessing. Just today I thought „man I really need some better Headphones“. Godsent.

[@rouslanlaffaure2736]

Same

[@jaydityapatel6091]

Ya same

[@Deathprints]

its just your data used by youtube to project business growth lol

[@SweetKingTanner]

God sent him to show you some sick headphones. Okay. Which ones did you buy 😂

[@darren4332]

Can we take this time to appreciate what he actually did for us. Im sure this video required a lot of time and money. Thanks

[@Keroser1983]

EXACTLY....He is literally the chosen one that would save us from 2020 probably :)

[@nicolasdesautels2848]

Let's also take this time to appreciate how insanely good looking he is. Woof.

[@kurtdiesel5769]

@@nicolasdesautels2848 nah...you can do that by yourself Nick...

[@DJRyanLambert]

Always look forward to his videos

[@idontknowWhatTosay8]

yeh thats right...

[@bboygavin]

Bro I honestly love your dedication, and you seem like such a nice guy, thanks again for always putting yourself out there for all of us!

[@inthemix]

Cheers Gavin!

[@THERRIEN_MUSIC]

Agree

[@ivanriverooo]

Absolutely magnificent video. To the point. Nothing was excessive. Your diction and communication's skills are fantastic. You don't shout at us, you don't mega stimulate with over editing, you don't speak overly excited. You don't try so hard like most people to grab our attention. For that alone I have subscribed. And plus, you helped me choose my new headphones. Congratulations. This is how you do it. ♥️

[@Michael-js6gp]

I 100% agree with you. Possibly one of the best review videos I've seen in years. Out of curiosity, which headphones did you decide to buy and why?

[@SuperFluidFerroFluid]

I have been lurking around YT looking for different headphones videos, and somehow every time i find one that is somewhat legit i want to Hint them about your video, There is no other person who present it like you do and they should all take an example of you. Just a flawless presentation! And i love how you include, in my opinion being a dj, vital info about the different soundstages rather then just talk about things like "replacable parts". I truly respect your work :)

[@LiraeNoir]

The Sony MDR 7506 _are_ an industry standard, you will find them _everywhere_ in the pro world. **But** they are a standard for a very specific reason: they are very cheap (relative to a production/set budget), light, and they accentuate all the wrong frequencies in the "right" way, making them quite good for monitoring/tracking audio (of all sort, but mostly vocals and ambiance) and noticing problems very fast (like somebody just activate the AC on set, or a phone is ringing on the floor below). They would be atrocious for mixing and mastering. As for comfort, they need to be broken in a bit, but they aren't for wearing 8 hours straight that's for sure :)

[@jonhattanrai]

I totally agree with you, I have used them for years and years, and they are not meant to be music monitors.

[@AxeLeven]

Hahaha, I have all the most headphones he listed plus a few others. I agree with you haha

[@jonhattanrai]

@*-* They should work just fine for that, they are pretty flat.

[@LiraeNoir]

@*-* Try them if you can. If you spend a lot of hours transcribing, they can be fatiguing. Usually you want some mid-forward cans, with a lot of details in the high, for transcribing. But honestly, that can be somewhat EQ, even in software, so I would go for long term comfort first and foremost than EQ for this specific application.

[@RitchieCaron]

My go to headphones for live and studio work since Sony discontinued the mighty and fragile MDR-V700.

[@hudyhere7240]

This man is on a mission to stop new every music producer from making mistakes. What a legend!

[@mdzuracka]

I've discovered DAWs a few months ago. Same with Michael's channel. Thank goodness for that, I've learned so much!

[@jaymusik1235]

@Fisher Man no this man is a true legend you never heard of before

[@jaymusik1235]

@Fisher Man yes I agree he is a legend but his name is not written on paper, so CNN won't show it, BBC won't show it, it's just us few realize him that he is a true legend AND THATS US. SEARCH ON KZbin for a song name Legend by chronnix he is a jamaican artiste That's the song best describe him in the producer realm

[@GoRedd]

@@jaymusik1235 mate you'll forget him EASILY after 1 week.

[@GoRedd]

@@jaymusik1235 also "famoues or not"

[@GiovanniBrouwers]

Thanks for doing this! I had the Sony MDR 7506 for nearly 9 years and have to say i get the point about build-quality feeling like plastic, but they lasted me for years. But i want to try out the Audio Technica and Beyerdynamic because i hear a lot of good stuff about them aswell. The Sony was always recommended as an ''industry standard'' but i feel you hit the nail right on the head when talking about comfort, feel and soundspace.

[@iikatinggangsengii2471]

think only way up is smth around hd650, ofc m70x also will be great

[@cornbone]

i trust your judgment the most out of any music channel on here lol. i was planning on getting the Audio Technica M20x but after watching this im definitely gonna get the M30x instead. this video was so helpful! i really appreciate these gear review videos because trying to find good (and affordable) gear is just so overwhelming as a beginner

[@rzx7959]

are they good

[@harshal8908]

Bro can I buy m30x for waiting movies and licensing music?

[@Pentenfi]

I own the dt 770s and tried the m50x in comparison for a few weeks. I can totally agree with everything you said about both. Hence, I'd trust your judgment of the other headphones right away

[@MFDOOOOM]

Which sound stage did you like better ?

[@BarmizzIe]

This is an essential video because I’m trying to put together my Christmas list hahah thank you please do some audio interface ones as well!

[@50450720]

The reason the Sony headphones are so highly rated is because they have such a neutral flat response, which is ideal for editing. Most of the others you reviewed had a base bias, or extended mid range etc, Which isn’t recommended if your editing audio. That’s why they are the industry standard, not because they sound the most pleasing when listening to music!

[@jacob999-b7r]

agree! i love my sony mdr-7506's a lot!

[@whatsonhermind1768]

Gotcha - yeah I was wondering why everyone was raving about them - I bought them and didn’t like them at all - but this makes sense

[@emilioguerid11]

same with hd-25

[@PermissionToMeow]

Agreed! I’ve been using these headphones for almost 15 years because of how much you can get out of your mix with them. And they may feel plasticky, but I can tell you they last many years with lots of abuse lol.

[@MrBlockHead]

I heard that Kinda like ns10 speakers. They sound crappy so if your mix sounds good on them then it sounds great on anything else.

[@dayp8125]

Wow! Best review of headphones I've seen so far. I've watched so many videos looking for certain specifics about a couple of these and finally I have arrived. Thank you for all the work you put into this! Subscribed!

[@Windklang705]

First of all: thank you for your generousity and giving away all these headphones omg!!

[@etajul13official]

I would like to join. 🤘🏻{^-^} How can I do that?

[@Windklang705]

@@etajul13official Hey there! Just follow the link to Michael's discord - it is in the description of this video

[@Kratous]

Hahaha I'm here too. :P

[@Windklang705]

@@Kratous Heeeeey deary

[@prazadsilva]

Best detailed review on KZbin for this price range. Love the quality of content.

[@TonyThomas10000]

My main pair is Sony MDR 7506 with Wicked Cushions replacement pads. They make a big difference and improve the sound considerably. I also have and love the Audio Technica ATH40s.

[@Kiefy6886]

That's exactly what I use for studio reference! The Sony's with replaced pads. I have Audio Technica ath-50 which is fun to listen to with it's naturally boosted bass but they are uncomfortable and VERY uncomfortable if I'm wearing glasses!

[@JAM_MCG]

Thanks for the list friend! I just got the Beyerdynamic DT 770 Pro headphones, they are very similar to my Samson SR950's set that i'd been using but the 770s are less "screetchy" at the top end so definitely an improvement. And now I see many folks using them online and replacement parts are much easier to find. Thanks for the help!

[@Burrfection]

are those Adams studio monitors i see?

[@inthemix]

They are indeed! The A7X are one of my favourites :)

[@littlehollow]

@@inthemix what are the ones you yourself use?

[@Burrfection]

@@inthemix need to try them. just have the 5's right now. need a wider desk......

[@Burrfection]

@@inthemix also, do you use work headphones for music and entertainment, or do you have separate for each use case?

[@inthemix]

I like using my 1990 pro for casual listening too but most of the time I use a pair of bose qc35ii for general listening/travel/fun etc! Are you looking to get a pair for work, listening enjoyment or a bit of both?

[@nolhotte6858]

Everytime I have to look up something studio or production related your videos are the first to show up and every single time I get all my questions answered. So thanks for everything.

[@stephenbowlby1638]

Thanks for your thoughts. The headphone field is fraught w challenges. As a voice actor, (previously film editor, and location sound mixer) in business for decades, I have extensive experience with Beyerdynamic DT770, Austrian Audio Hi-X55, AKG k553 mkii, 240, 140, and Sony MDR-7506, 7509, 7510, and 7520. Favorite for best detail and texture by far is the Sony MDR-7520 which is sadly discontinued. I just picked up an eBay replacement for mine which blew out by an unfortunate transient after years of faithful service. Agreed that today's 7506 are not as good as they once were, which was never great but at least a known quantity in the broadcast/film industry. They remain the only "studio monitors" in Sony's lineup. The 7509 were fine, used them for many years before getting the 7520. The 7510 were not great at all. Used the DT770s all last year, and agree w your description. They are quite accurate BUT the acoustics of the cups give the sound way too much space for voice over recording, rather than that intimate "in your head" sound you ascribe to the AT. ALSO...the build quality is not great on the 770s. Noisy plastic parts rubbing together create distracting sounds. The Hi-X55 were touted by all as super-detailed. I was enormously disappointed and returned them immediately. Sounded just awful: inaccurate and cheap. Likewise the K553 mkii, which used to be well-regarded but are no longer made in Austria, and I really can't say enough bad about their sound. I flew in a different Japan-only model Sony for big $, and immediately returned them as well. I am pleased to hear your assessment of the AT, which, along w Shure SRH1540 at a much higher pricepoint, would be in contention next for me, should my new/old stock 7520s not last forever either. Good work!

[@memoli801]

Try Planar magnetics. I love my Hifiman Sundara so much! Not so excited about my 770Pro 250 Ohm. But like the robust build, it is a bit stiff though.

[@jaivkoltun4948]

I've been using my k240 mk2s for many years for all my audio projects start to finish, and I've found them brilliant in every way. My point here is, we all have different hearing responses at different frequencies, different headfones will suit different ears. . . That's it. Great review, but also kinda pointless, unless you're wearing his ears !!! . . You gotta try them yourself !! . . . Happy Days. . .

[@iikatinggangsengii2471]

now i remember

[@AnteroJokinen]

I have both M50s and DT770 Pros. M50s are fatiguing without Sonarworks, DT770s are way more comfortable otherwise too (the band is softer). One thing I hope people would remember though is, that people have differently shaped heads and ears so it's not always "one model fits all". :) In my case, the top of my head and ears get irritated very easily, so I need a very good soft headphone band and cups. DT770s have been the best for me so far.

[@MusicByKanak]

Can't appreciate the timing of this video more❤❤❤ Was gonna go for the M40X anyways❤

[@tylancarino2959]

is it holding up well? i heard there was an issue with the hinge so im torn with m40 and m50

[@MusicByKanak]

@@tylancarino2959 well, im having a great time with the m40s , at first they were a bit uncomfortable, but after a month or two, they're a lot more comfortable. As of the hinge, i haven't heard about it much of a problem.

[@nolecheporfavor1581]

I actually have a pair of 7506's and whilst they may not be the best sounding overall, this is a plus point for mixing. These headphones are not forgiving at all when it comes to clipping and you can really hear a difference in older music compared to some of the newer stuff when it comes to "too much" in a mix. In my opinion these headphones can really help you push a mix as its a nice balance between a 32ohm and an 80ohm. Also with my oddly shaped head, these are quite comfortable despite the rigid look.

[@alvarof1166]

7506 are the NS10 of headphones 🎧

[@jongarzamx]

The 7506 are the only ones in this list that can reliably detect even the smallest amount of DR over-compression. They don't sound bad, they just bring unwanted attention to bad mastering practices.

[@chasemcdonald4073]

7506 the best headphones on this list

[@lamarslappz6020]

Thanks for keeping us "In The Mix"!

[@sohyangworld1544]

So nowww i comeee to youuu, with oppppen armmss

[@harmlesip1]

I bought some Audio Technicas on your recommendation and they're absolutely fantastic!! I always trust and appreciate your advice! Thank you.

[@iankahuthia2002]

which ones did you get?

[@uselessoldman7964]

Sony MDR 7506 headphones are what sound engineers provide when musicians need headphones whilst rehearsing and recording. They are rated at 63 Ohms so as you well know, they don't need a headphone preamp to drive them hard. They are considered the studios workhorse headphones for a reason, cheap sound good and extremely functional. As for the DT770s, yip good but the 990s are miles better for mixing and final mastering, better be cos thats what I bought and use but I also have a set or two of the Sony 7506s !!

[@dothgaerwenoakblossom15]

So I have the ATH-M40X and I am happy with them, I also love sound coming from around you so maybe I'll buy the Dt770pro in the future By the way your videos are especially so good because you are so relaxed all time!

[@inthemix]

Nice! For an even more wide open feeling maybe try to DT 990pro? That way you will have the 40s for recording and referencing and the DT990 for your detailed mixing and mastering?

[@dothgaerwenoakblossom15]

@@inthemix yeah that is an option thank you

[@harshal8908]

Bro can I buy m30x for waiting movies and licensing music?

[@deanZAbean]

I have used the M20X audio Technica headphones for like 3/4 years I believe, only issue I find is the cable does wear quite easily so does the padding but the pads on the ears doesn't cause any discomfort and the audio is amazing for the price range, I have had to buy a 2nd pair of these but I just found the price and quality to be worth it. Kinda was shocked to see it on the list still as I was looking to upgrade (which I still am) but just goes to show they put the work in the right places for those earphones

[@quariusmusic]

Woah ATH M20x is my first ever headphone investment too...

[@ChrisBessy]

you had good mix with them ?

[@selevabeats]

Love the audio technica headphones just in love with the bass they produce

[@ed_marin]

I've been thinking about getting better headphones for my podcast editing and post and my two options have been the M40x and the DT240 Pro. This video is just what i needed. Going for the Audio Technica. Thanks man, your content is always useful

[@dynatwenty]

You´re brilliant man. Your videos are put together so well. I can´t find any channel that has your output quality. Keep it up man ! 11/10

[@DuskLight]

That's one of the best and huge comparison/review videos I could find, especially that video thumbnail, Nice one. Keep on keeping on.

[@desbrowne1900]

Of the all reviews out there, this is the one I kept going back to and made my decision based on your recommendations and advice. Clear, informative and straight to the point. Thank you

[@hockeysong]

Note that the Senn 280 pro is extremely flat and found in virtually every recording studio world wide. They are amazing head phones that won’t artificially colour the sound! Agreed on the clamp force. Trade off. Also the ear cap is oval resembling the human ear, not round which is a favourable shape to build. $129 Canadian. Great videos! Thx G

[@pressure-spirals]

Great video! Very informative and to the point. I have been looking, asking, searching for months to buy my new headphone for my mini home studio. I was almost ready to buy the dt 770. BUT most of the people i talked (for my gear, money etc) told me that if the audio interface is low budget no good quality headphones can perform well and there is no reason in giving the money for the DTs. Especially the 250oms. Lots of people suggested me also to go for open back , if i don't record with mics or annoy anyone at home. So before your video and after so many conversations/recommendations.....i was going for AKG240 mii (half open back, good recommendation for low budget audio interface) . But then......your video KILLED ME :P The Audio Technica M40x/50x is also highly recommended but i m confused with so many guys telling me about the open back's better quality. The DT 990 comes only in 220ohms (i think) :( I was hoping there would be recommendations for low budget audio interface also in your video. What would you suggest for my behringer u-phoria umc22 ? Can the DT770 32ohm perform well enough? Do you recommend / agree with the open back headphones? Are the AKG k240 mii that bad for me? Thank you for you time Edit. i just saw an older videos of yours talking about the deference between 32 ohm vs 250 ohm and open back and closed headphones. So you helped me a lot. You also said almost the some things most of people have told me. So i guess it all leads to another additional question. Should i save money for a more expensive audio interface plus DT 770-990s or leave that for later and buy cheaper headphones that work great with my behringer u-phoria umc22?

[@divinevirtualreality]

Amazing info. I started with the ATH-M30x and went to the ATH-M20x and I’m almost ready to go back to the M30x. I LOVE audio-technica and I think they have done an amazing job when it comes to working with bass.

[@iikatinggangsengii2471]

theyre indeed the most close to neutral sounding amongst others, never listened to beyers

[@AlaDdin199]

Hey man,how is the durability on the M30X...specially the earcups pads he mentioned?

[@divinevirtualreality]

Honestly speaking I’ve had them for about a good 3 to 4 years now and their barely cracking. I just personally took a look a them the other day. The earcups to be exact. Most headphones I went threw end up falling apart in less then 2 years. I definitely would recommend them for sure. 🔥🔥🔥

[@AlaDdin199]

@@divinevirtualreality which one do you think would be more durable in every aspect including the earcups pads for someone who uses them 6h a day .. The 30s or 20s?

[@divinevirtualreality]

I have the M20x’s and they are pretty loud when hooked up to my behringer U-Phoria UMC22, but they get even crazier in sound when it comes to the M30x’s messing with the bass and treble. 🔥🔥🔥 If you can get the M30x’s I recommend them, if not M20x’s are amazing to. After years of creating music I have no complaints about this brand of headphones. The M30x’s also fold up for easy travel.

[@jackara]

Great review and format! Perfect mix of objective and subjective. You know it's true because I have the HD280 pro and am happy with them hahaha. But honestly I mostly listen to music and enjoy the linear sound, passive noise reduction, and fit of them. They do clamp down really hard for sure! Great stuff! I'm subscribed :)

[@LaRana08]

I went to guitar center and picked up the ATH M40 after watching your video . Best investment I’ve made in a while.

[@bobbydunnit]

I agree with all of your noted observations on the Sony MDR 7506. They’re my main headphones and my biggest complaint is the terrible material used for the ear pads (I just replaced them with a pair from Wicked Cushions and they’re 10x better). But as far as sound goes it seems like there’s nothing under 1k or so (although the frequency spectrum shows differently) 🤔 There are two advantages though. One, they’re great for referencing your mix/master because if you’re mix/master doesn’t have enough top end when listening on these then you have a problem and vice versa. Second, they’re great for tracking because you don’t get a ton of bleed. It helps that it has a good impedance level, as well. But I would never solely mix nor master on these.

[@Veroniccordion]

Thank you, jerma :)

[@thenaut2111]

bruh no you cna't say that, I can't unsee it now

[@pierricklax6079]

Really good video. I tested lots of headphones and I also prefer the DT770 Pro 80ohms. The soundstage is amazing for this price range. Very competitive product also against headphones more expensive !

[@kaseywarren2106]

Beyerdynamic truly knows how to make great headphones and audio gear. I love my 990s.

[@mgyeri]

Do you have the 990 pros or the 990 edition? I just ordered my dt 990 edition a few days ago and and very excited to finally unbox them and listen to my favourite music with it.

[@GavinAtkin]

I have the 990 Pros. They feel to me like there's something missing. Ditto my pair of 702s, though they're missing a different part of the range. Sigh...

[@kaseywarren2106]

@@GavinAtkin the pros are 250 ohm so you have to make sure that you either have a preamp or good amps in your interface.

[@GavinAtkin]

@@kaseywarren2106 Thanks! That might be it, as reading around it seems my interface hasn't got the necessary grunt. However, I've got headphone amp to hand that will hopefully do the trick...

[@AbhayRajan]

He's so underrated, hope he gets to 1Mill quick! 🙏🏽🖤

[@albo__7804]

you're doing gods work my guy

[@4DMIIR]

Bought a m40x few months ago and they're amazing.I'm satisfied with the high end,mid and the low end.Recommend it definitely to everyone who wants to mix and master.

[@Cache_outtt]

Yea and the m40x is much preferred over the m50x's because the sound is flat and more accurate

[@Artek604]

@@Cache_outtt Yeah, I was surprised the 50s got recommended above the 40s.

[@richtrelo]

@@Artek604 other way around

[@Artek604]

@@richtrelo What you mean "other way around"? He's top 2 spots were 770s and m50x, no?

[@richtrelo]

@@Artek604 you said you were surprised the 50s got recommended above the 40s but it was the other way around. The 40s were above the 50s

[@tarunkumaar625]

I've watched this twice now and it's a great video. Even for people just getting into the audiophile world this is pretty easy to understand and you cover all the relevant points perfectly and accurately while pointing out any biases you might have. I got the M40X over two years ago after a lot of research and a video like this would have made my life much easier. One thing I'd like to point out is that the M40X are even more comfortable with earpad replacements and in my opinion, M40X + 20$ earpads is a better option over M50X.

[@Alex-wb2yw]

I agree. I did the same, put thicker over ear pads on the M40x and they sound awesome. Very clear and neutral (in a good way, not boring), and the bass is strong but not overdone.

[@kevindermotodoherty5312]

Great vid - very helpful. If there was a note, it's that the Audio Technica M40x is retailing at a lot more than £78. Be lucky to get one for under £100 now!

[@cellocubano]

Love this channel! You go through it all!my favorites are of course the dt-770 pro and the Sony MDR 7506

[@RaghavDawar]

The timing of the release couldn't be more perfect....

[@Mr.manpasserby]

The Grado Labs SR80 and Koss Porta Pro are an excellent choice too in an open-sounding style

[@damiena.avalos9379]

This guy really is all about the love of the art he puts us on to free game everytime

[@louisfifteen]

I got the Audeze Maxwell and love them. They are a little to the heavy side, but the sound is the best I've ever heard. For gaming without delay, there's a usb dongle so you don't need to connect with BT. No delay at all and 80 hours of listening or gaming. $ 299,-

[@floor.mp3]

My first pair of proper headphones (dt 770 pro) should be arriving in the mail tomorrow and i'm beyond excited

[@kennethlourisombrog2149]

I love the elaborative definition and explanation. Saves me the time to try each.

[@Sunita.Kumari303]

And yes, what a coincidence! I was just looking for headphones when this popped up.

[@zacharyhollema4255]

Same lol

[@MrRudePolite]

same!!!! Mine busted last week, and I was literally just on amazon looking!

[@moneymagnet2785]

Same lol xD

[@thethreetrain]

Not coinicidence lol...ur phone listens to you

[@zacharyhollema4255]

@@thethreetrain you legit think that lol

[@SuperFluidFerroFluid]

By far the absolut best channel for these kind of things! You're a star my friend! I'm using the ath 50x at this point for my mixing, however i'm looking for something alittlebit more lightweight..

[@HappilyAnonymousGirl]

I know this video is old, but maybe some people are still watching because they are looking for quality headphones. Anyway, I saw this video a few weeks ago and a few others and decided to get the Beyerdynamics DT 770 Pro headphones. I believe they are currently 18% off right now on the ProAudio website. They are indeed very comfortable about have great sound quality. My only complaint was that the headband made the top of my head hurt for a few days, but once they broke in that was no longer an issue. My brother happened to order a pair of JBL headphones at the same time that ordered the Beyerdynamics. He offered me to try them out and I was really impressed with the sound quality and comfort of them as well. They are currently 60% off right now on the JBL website and they also offer payment plans. I ordered a pair myself and got them delivered after making my first payment of $12. Just wanted to put it out there. I’m not a sponsor or anything, just want to help others who may be looking for good quality headphones for a cheaper price. Not sure how long the sale is going for, but I thought I’d share while it’s still going. Thanks again for the content you make. I’m really glad I found your channel. You’ve already helped me a lot.

[@svensvensson8102]

Awesome, thanks. Any advice in the DT770 vs 990? Closed vs open design for all-round use in production, mixing and mastering? The impedance is also a bit of a mystery. Not technically but I keep hearing different things about whether your average USB powered sound interface can drive 250 ohm properly. Any advice welcome.

[@lumpyfishgravy]

I bought your top two some years ago and no regrets. I prefer monitors but every time I use them I'm surprised and there are times they work better than monitors. Reminds me I was that nerdy kid in the 80s wearing full size Sennheisers in public instead of tinny walkman headphones. LOL. Overall I probably prefer the DT770s. They remain great value and have a little more detail and flatness than the M50x. However, they're not best for travel due to rigid headband and large shells. The M50x is what I use at work. Can get a bit warm and prickly after a while. Nice range of cables but perhaps not as durable as DTs and pukka spares v expensive. If Beyer brought out a Bluetooth version of DT770s in nice livery, I might bite. Oh, another note about DT770s. They need welly. You might run out of volume if you plug a 75 Ohm pair into a portable device.

[@jesavius]

Liked, Subscribed, and Smashed the like button! Him buying all the headphones with his money is so critical. I know these are his honest opinions because it's his money. Also, gotta respect the flex. Dropping a little over G for the game is commendable. This is the fifth Producer KZbinr who's recommended the Byerdynamic DT 770 Pro. I'm buying them now!

[@joepecsi1332]

I can tell ur going to be one of my new favorite channels. Ur other videos look like what I have been looking for in a channel

[@romans-ivanovs]

Ordered Beyerdynamic DT 770 Pro, thanks for an in-depth review!

[@sylvestrestalin]

I would also like to mention: although beyerdynamic products do have a wider separated sound stage that I prefer, over time the build quality is not on the same level of audio technicha's and not having replacable parts does hurt you.

[@willforcey2921]

Thanks so much for this video! Just got a pair ATH-M40x today and am loving them!

[@theworkdayrelease]

Lucci destroying AKG is my favorite part of the video. I'm rocking the Audio-Technica M20x's. They're terrible and I'll probably never upgrade.

[@Luckywynne]

Lmao

[@pocketmouses]

Shiet I just ordered the K90s online. Whathifi said they were the best in the £50 price range. I have a pair of the AKG 240s from when they were made in Austria and loved them but they are wearing out and the replacement cable has too high impedence so I lose nice clarity I originally had.

[@AKJ828]

Finally a review that isn't just specs or audio samples! Thank you

[@goldivox50]

Best review I’ve witnessed in years. I own 4 pair of BD 770 Pros and my ears tell me just what yours revealed. Have had a couple pair of those highly touted Sony’s and agree they are not useful for tracking, mixing or much else that requires detailed sound - and they bleed into any condenser mic when I’ve tried using them in my vocal booth.

[@kndlshop]

as a producer, i own the M50X and the AKG K 702 and i subscribe to everything Thomas said. They are both brilliant, but i end up usind the M50X 90% of the time. However since i st arted watching movies with the AKG K702 i was in awe of how absolutely gorgeous they sound with movies. IT sounds like you are inside the movie.

[@debnadaebna9981]

You seem to have an accurate sense and analysis, and since you only test and compare headphones from well-known, reputable brands, I am extremely curious what your opinion will be when you try cheap Chinese headphones of the brand "OneOdio" model Pro10 or Pro50. I've searched all over the internet and I'm amazed by all the different reviews that are most of them completely authentic and people compare these headphones (in terms of sound, not build quality) SLIGHTLY below the ATH M40X/M50X, when they cost many times less and are available for everyone. If you have the opportunity, get these headphones and make a comparison video, it will be a blast!

[@lllazarrr]

Thanks for an informative review! You recommended in one of your other videos that studio monitors should be flattened with Sonarworks. Since they offer the same software for headphones, wouldn't that eliminate all the problems with headphone coloring? For example, would it be better to get KRK kns 6400 + Sonarworks, or DT 770 Pro without SW, for tracking and mixing (the price is the same)? I'm guessing there's something more to it, otherwise everyone would get the cheapest headphones + software :)

[@sebaba001]

It's so weird because all of this is very subjective. I have DT770's at home because so many people recommended them because of 'comfort', but my ears really hurt after a few hours, and they are heavy as hell. The sound is fairly neutral, no complaints there. However, I tested the Sony's (at work) and I gotta say I like them much more. Lighter, more comfortable on the ears, I liked the sound too, and they are indeed, standard for many people in the sound industry, so I have to wonder if that 'thumping lower mid' frequencies were a defect from your pair, since I've never heard that before in thousands of reviews.

[@NorthMelodies]

If you need really flat ones then I would recommend hd280 pro, mdr7506 and dt770 pro rest have an extra and boosted frequency response...

[@andreashandinberntsson4428]

I have this returning problem of my headphones, "headbands" snapping. How do I find headphones without this problem? Any recommendations? I would only use them when I'm at my computer.

[@usuallyclueless4477]

try the ones with self-adjusting headbands (akg k240 / samson sr850 style headbands)

[@paulmoncton]

I like headphones with great high & low frequency response, but it's worth mentioning about flat response headphones too. Many studios carry them to mix on, or compare mixes on different playback mediums.

[@DrawingTechnical]

I appreciate your honest review. Looks like I'll be going for one of those Beyerdynamic ones, sounds like they're really good.

[@JakeTheNinja]

I own the Audio Technica M50x headphones, and I can stay that they are amazing!

[@lukav200]

I hear the major flaw is they are extremely uncomfortable, especially wearing for many hours. Agree or disagree?

[@englishincontext4025]

Thanks so much for this super video. I was pulling my hair out trying to decide on peripherals for my forthcoming iPad Pro purchase. This has helped a lot. 👍🇬🇧

[@abbesatty9498]

The Beyerdynamic DT-770 is now £95 in Thomann.

[@RobHTech]

I have the 7506, and they sound good and are a benchmark for me. They sound good at everything, best at none, and get loud as hell when needed.

[@Androssverse]

I always check if you’ve reviewed a product I plan on buying lol. I trust ur word when it comes to reviews due to your thoroughness.

[@abhinavchauhan5095]

Thank you for making it easy for me to choose the best headphones. Really appreciate your efforts! :)

[@Xxxxcxcx]

I have the M40x. Amazing headphones, great for mixing and mastering music. They’re a little bit uncomfortable after an hour or two of use so I recommend to take a little break just so your ears/jaw can rest.

[@pannuboi2807]

Is ath m40x better than beyerdynamic dt 240 pro ?

[@rbmanb]

Would you be able to compare how other headphones would be like, comfort wise?

[@maomallows]

This is so helpful Michael. Awesome hairdo as always.

[@SirPentinite]

This is the most helpful video on this topic on KZbin. Thanks!

[@wildwilly258]

Truly and honestly helpful thanks so much!!!

[@orenfisher8948]

You have good ears. Nice work! Your thoughts regarding the M40X phones are very accurate, as are your criticisms of those horrendous Sony ear-destroyers. When you have an opportunity to try a pair of Beyerdynamic DT 250 phones, take it - you will be impressed.

[@insaan1234]

I received my m40s today, the sound doesn't exite me at all out of the box, but idk if I should return them? Are there better alternatives? I bought em because of the great reviews, they sound flat but are lacking details

[@sxyngel]

keep getting distracted by how beautiful your bone structure is

[@mitzimusica]

And his voice! Omg so deep

[@petesorensenguitar]

@@mitzimusica his voice isn't deep, it's the high fidelity recording microphone that picks up low end frequencies better.

[@mitzimusica]

@@petesorensenguitar nope, it's the vocal fry he naturally has and the timbre what makes his voice so deep, besides the mic. He could be using a Samson Q7 and his voice would still sound gorgeous.

[@alisaangels2646]

Shawn Mendes

[@Mrcheesydancer]

thanks

[@DCandtheInsectobytez]

I'm leaning toward buying the Beyerdynamic DT 770 Pro according to your recommendations. Would these be good for music creation (which is what I do)?

[@alisaangels2646]

Nopee ...Audio techinca will over you the same quality in less money ... Just use a lil eq for unnecessary highs and a bit to flat bass ... trust me you'll find no difference even better in build quality , moreover you can shape it far priced headphone sounds by just shaping the eq ....choose wisely

[@autotropicplaybench1819]

While I like my M40X for what it is, with its V-shaped signature, the stock pads are bad to me.. they are kinda stiff and with the tight clamping force it's hard to feel real comfort for even just 2 hours of use (I'm used to them now but others might not feel that way, don't take just ny word for it but compare other reviews first). Also, the fake leather wore out on the headband more easily than the cheaper M30X I had for 2 years; with the M40X it only took around 6 months. While I admit that I did scratch the earpads accidentally with putting a Bluetooth adapter on the bag once which caused that to wear out a bit at first, the fake leather layer still managed to wear out by itself further over time on both sides. If that was amplified due to sweat I understand, but the cheaper M30X didn't wore out that way by itself either. Good news is the earpads are replaceable with some effort and with the Brainwavz angled oval earpads they are fine now, comfortable enough though the sound signature slightly makes them a bit even more V-shaped.. there are other brands and pads for the M40X like ZMF cowhide or Dekoni, but be careful in searching, I tried to get a cheap unbranded one from China for cheap being naive in thinking that's enough, and well that ruined the M40X sound completely by making the treble sound painful. Basically if you plan getting the M40X, prepare to get extra pads just in case, it is still worth it and doesn't drag down the M40X being a good deal.

[@CdMatch]

Thank!! Very helpful! 👍 Always enjoy your videos and tips.

[@FilmaticProductions]

Dang. I love my Sony MDRs, but I'm a video editor. I guess if I were doing more audio work, I would step up to Audio Technica. I honestly walked by that brand for years when I went to the store because I saw all the college DJs wearing the M30Xs and it just made the brand look cheap. I LOVE THIS VIDEO!!!

[@_innerscape_]

IMO the DT770 is highly overrated and not ideal for mixing. The "quality" it has are a psycoacoustic byproduct of the out of phase bass that may sound more spacious and less slamming (it's just a badly done bass reflex), recessed mids (most of the music will be pulled back and out of the head) and peaks in the highs at 6k (sibilance) and 10k (fake detail and metallic attack). Also badly rendered transients (drivers and cups not dumped and thick foam in tront of the driver). I get how someone how has never heard something better than the earbuds delivered with the phone could like that (I still prefer Sennheiser MX400 earbuds with foam tips to DT770 !) but I can't understand the amount of pros (I am a pro) that like that model O_o. It's like being fooled by a Bose boombox. In the same price range I much prefer the M50 rendition even though it's not ideal, but at least it's flatter (more like a 1dB per octave slope than really flat). Closed headphones have resonances and can't sound like the best open ones (the main features is that they isolate: tracking and monitoring of live recordin). But the open ones can't reproduce the first 2 octaves at the right SPL and no isolation. The best compromise I found are the Denon D2000 and E-MU Teak, both a Fostex project (avoid the original Fostex ones: exagerated bass and trebles), with different pads (thicker acoustic silk to tame highs a bit and real leather for longevity and comfort) and a doughnut of fiberfill in the Teak cup to tame resonances (it's completely empty!). They're semi open so they manage to reproduce the first 2 octaves convincingly and they can "breath" to sound non congested and also provide a bit of isolation. Great mids and highs and an almost perfect flat line (1 dB per octave slope) from 20 to 20K. Planar magnetic models have best bass in class but they struggle with highs and they're heavy and pricy. For IEM I absolutly love the Etymotc ER4. B version for ultimate top end clarity with red filters to tame the 2.8K bell (necessary to compensate the bypass of the external ear resonances) by 2 dB (IIRC). SR version for more casual Hi-Fi sound (no extra top end) also with red filters. Green filters are still good for ultimate clarity in voice.

[@KristoferProphet]

Hey can you look into the DT770 Black Mage Mod? The seller modded the headphones. There are charts on the site if you google them, want to know if it’s worth checking out.

[@_innerscape_]

@@KristoferProphet Hello, I didn't know of that mod. The graphs look good compared with HD600 and HD650 (I had booth side by side for years: they're good but no low bass, 600 is grainy in the highs, 650 has mid bass hump and no grain in the highs. Booth a bit too much energy between 2k and 6k, 2-3 dB. Mortal sin: muffled transient response like a thick drape in front of the speakers. Expansive pads that age quickly and change the sound for the worse once flattened out). Maybe there's still too much energy between 5k and 8k. The general downward slope is good. It might be worth a listen but I would like to see the impulse response and square response (farewell innerfidelity) because those show the behaviour in time. If you manage to listen to them give a feedback here...

[@KristoferProphet]

@@_innerscape_ I will ask him for those graphs and charts! I don’t know if I will know what I am looking at though, nor do I know if I want to dish out money to the seller if the headphones won’t be that good. I want a good pair of closed backs because of my noisy environment and ambient noise, to block that out while mixing and mastering. I was thinking of the Neumanns, but I am not sure what my best option would be.

[@_innerscape_]

@@KristoferProphet for extreme isolation try an IEM. Per dollar they deliver better sound than full size headphones. I've seen the Neumann ones. By the graphs maybe the mids are a bit recessed but I don't know... M50X are decent for mixing, just a bit cloustrophobic and uncomfy. i can recommend the modded E-MU Teak. Try on the drop site. They isolate a bit but not like M50.

[@KristoferProphet]

@@_innerscape_ Is the E-MU Teak modded in sound signature or just the cables? Because I am only finding the detachable cable as a mod.

[@undoujo]

the most useful comparison review i found for buying headphones thankyou

[@steveukable]

I use akg 240's, you are right about them....but you really need to bed them in, after a few hours of use they start to sound a lot better, they do say this in the blurb..

[@amirazimi3820]

Omg, you're married, I'm happy for ur wife, she has a good husband

[@yesjo1456]

"settling in" isn't a thing lol

[@chasemcdonald4073]

Yes it is

[@ed.z.]

A very credible and thoughtful review. Thanks.