I used the engine from the scrap yard, to make an engine, V4 90, part 1

[@anhthomay93]

Cảm ơn bạn! Đã chia sẻ những video thật bổ ít, mình xin típ thêm động lực để bạn ra video tiếp theo nhé.

[@Le_Dan]

Rất cảm ơn bạn đã ủng hộ 🥰

[@nigelbutler9488]

He makes it look so easy, another exciting and complex build. Well done LeDan. Looking forward to the finished product

[@Stevo736]

I,m not a Machinist but i am blown away and humbled by this. I love to see such great Engineering.

[@RB87NL]

Very underrated channel, you are a master machinist!

[@ussweeneyd]

Your work is amazing. The depth’s you dive to when you make a cut without hesitation leave me wide eyed. I hope there will be follow ups to this V4 build.

[@donlunn792]

I cannot comprehend how this amazing young man produces these amazing marvels of Engineering! I am absolutely in awe of these skills. He mills through castings,cuts up castings,tig welds,and ends up with these fantastic pieces of Engineering! I’m totally blown away.

[@shakdidagalimal]

The skill set on this one is unparalleled. Beyond a mere master, a PHD.

[@aSpyIntheHaus]

Le Dan, A bloke who can machine up an interference fit on a crankshaft journal then take the same crankshaft and go at it with a cut-off wheel on a grinder as a final cut. How can you not be impressed with this?

[@ripfletching]

That’s crazy and amazing. Can’t wait to see it run

[@marcioreis2648]

I love to watch you do what you do best. Congratulations my friend, you are certainly a genius. 👍👍👍👍👍

[@kcraig51]

Anyone not a machinist may not realize just how difficult it is to maintain squareness and keep center lines parallel. He obviously does an excellent job, because his engines run so well.

[@miguelcastaneda7257]

Yup 45 years machinist ..this is Damm good

[@Le_Dan]

👍

[@MachinistSquare33]

As a machinist, I am amazed at the skill he has acquired. Absolutely awesome

[@Kiwi-pp7rg]

I do and is in disbelieve let alone the alloy welding skills

[@rrracing8912]

Ehh aku nyasar

[@thanhvi1185]

Chúng tôi đợi video tiếp theo của bạn.hâm mộ bạn lâu quá rồi. Trên cả tuyệt vời. Mong bạn ra phần tiếp theo

[@1984xlx]

As usual, quite impressive! I can't wait to hear it run!

[@karlalton3170]

Và giải thưởng thiết kế của năm thuộc về Lê Đan 👏👏 công việc tuyệt vời của Dan 😁😁🤘🤘🤘🤘

[@marwanalmajid429]

Will wait for part 2, Good luck🌷

[@canastasiou68]

You are a master mechanic, I've never seen anyone with your skills. Cheers from Australia 🇦🇺

[@AridersLifeYT]

heaps of australian engineers do this for their final exams etc.

[@KATEKNIK001]

this idea is very impressive my friend, thank you for giving the best

[@jeromecanezo9774]

New video new project. Thankyou for entertaining us you did the great job my friend 👍🏼

[@danielv1525]

I've watched this episode maybe nine tunes. Enjoyed it evert single time. Hope the next episode follows soon.

[@daylenhatheway5187]

You are my hero! Respect from Canada

[@joseabrahaoabrahao7937]

tool is everything, but knowledge with experience you can do whatever you want... congratulations... excellent work...

[@benimatyus]

holy shit, this man is truly a master of his work

[@dsgamechanger5834]

Que increíble este tipo, es un ingeniero que proyectos tan chingones, mis respetos, saludos desde Guatemala 🇬🇹

[@cathy5722]

I was hoping you would build a V-4 engine Le Dan. You have proven there is nothing you can't build .

[@darrellkelso9915]

Full commitment and determination out of necessity, kudos.

[@29madmangaud29]

Wow Le Dan, you are incredible! Good Job!

[@ruhiugamblin254]

you really motivate me Le Dan....you inspire me 🔥🔥🔥🇰🇪

[@blairguinea6811]

Le Dan the Boss.............you just carry on making the best engines in Vietnam, Vietnam number 0ne................Ông chủ Lê Dân ............. bạn cứ tiếp tục chế tạo những động cơ tốt nhất Việt Nam, số 0 Việt Nam

[@nuongkhanh9034]

Xem mà không muốn rời mắt Quá tuyệt vời , hóng phần 2 nữa 👏👏

[@josevillalba368]

Brutal amigo ya lo próximo v8 🤔🤔😂😂😂😂 saludos desde Uruguay 💪💪💪

[@hectorvelandia3782]

Who wants a in line 5 ? When he can made a V6, i personally admire your skills and work bro ! Good job on this V4

[@reidspeed77]

Mt Olympus This is going to sound incredible Dan you are the number 1 wizard 🌐✌

[@banginhvan3976]

Lâu mới thấy lên sóng. Chúc bạn luôn thành công

[@restoringo]

amazing work.

[@Stubytube]

Un verdadero maestro de los motores excelente trabajo, y sin tantas herramientas sofisticadas me quedo a la espera de la segunda parte. abrazo desde Argentina.

[@77kgggdkp]

un capo le dan desde acá en Argentina te mando un saludo y seguí así que tus videos me alegran los fines de semana...

[@Roman-wl1rh]

Потрясающая работа !👍👍

[@sergeyzamyatin6282]

Мужик, ты красавчик. Золотые руки у тебя

[@helixworld]

For a V4 engine, I suggest to use a 360 degree / single-throw crankshaft. Then each bank will have even firing pattern like a parallel twin. The advantage is to improve exhaust flow by using 2 into 1 headers.

[@Tungmoto]

He did that before, before his previous chanel was hacked, he built a 360° crank shaft V4 engine from Honda 110cc engines.

[@reubenmosman9466]

Truly amazing, you are so very talented. . .

[@abuelitojuke8595]

Increíble y magnífico trabajo y muy bien realizado es usted un genio le felicito MAESTRO tiene usted todo muy respeto , un saludo ! ! ! ! ! .

[@woodworkingofficial8525]

That's crazy and amazing I will waiting for Part 2 🥰🥰🥰

[@HerculesK2188]

Wow! Well done Sir, hope to see this engine running.

[@saifuldarussalam3322]

I love it man! GO a head.... God bless you...

[@buyamerican3191]

You are one talented dude! Rock-On.

[@mikefordham6546]

I'm not a machinest, I'm not good at anything like this, I struggle with my rc modelling, yep I'm crap at that too, your skill and knowledge and ability are frankly fantastic.

[@boofer875]

Why is this guy not working for Ford or Chevrolet? Seriously, hire him to teach that bunch of Millennials how to think. My apologies to the old guys who built great stuff and are hanging on for the pension. You deserve it. I drive a 2014 Edge NA 3.5. Water pump inside the oil? Your education ain't working. Go, Le Dan.

[@helixworld]

Great idea. I can't wait to hear the engine running.

[@samphardtake]

Outstanding work. I admire your work sir. Great content,greetings from Serbia.

[@saturatedtv5138]

le dan..you are crazy..yet genius 👍

[@carfran53]

Absolutely great. Real master of your trade.

[@Roman7628]

Es impresionante su trabajo, inventos e inteligencia, saludos desde mexico.

[@badrinair]

You are a genius. Amazing skills

[@jomelmarasigan]

Wow nice but its better if you put cooling system Nice sir keep it up 💖

[@bccradventures84]

Much respect!! Wish I had the machines and tooling to do such work!!

[@levelflightvideo]

This guy is a seriously talented engineer. I would love to spend a week with him, imagine what you could learn.

[@katiemmm347]

The amount of forward thinking / planning you seem to manage with zero computer CAD etc is mind blowing 👍 I would love to hear what your thought process is on planning these projects

[@Baribrotzer]

This was how they used to do it, before CAD/CAM was invented. Lots of skillful hand work, accurate measurements - note that dial indicator - and tools that might have looked crude, but lined up very well. Even then, the job is so hard and time-consuming that it wasn't done very often by anybody. But even under Third World (pardon the expression) conditions and tech, a true craftsman can do some amazing work. Look at old-school Afghan gunsmiths for an example - perfect copies of European firearms done with a hacksaw, files, a hand-drill, and a foot-powered lathe.

[@identiticrisis]

@@Baribrotzer definitely, the hand skills are important and ought not ever die. But holding not only the finished vision in your mind but also how to get there with what you can see in front of you takes a special kind of talent for sure. Our greatest gift is being able to imagine that which hasn't been created yet.

[@Pdfflyer1]

I would like to hear your thoughts on the process of planning the following project: I would like to convert a Nissan’s VG30DE engine which is a six cylinder to ADD cylinders either to make it an eight cylinder or as you demonstrate the 90° angle approach to convert a V6 block to perhaps a V-8, a V-10, or a V-12 block. I am serious about the project and I have thought about it for well over a year. Please advise your thoughts on converting a VG30DE Nissan engine to add cylinders. My regards, You also have a wonderfully talented approach and I enjoy your channel. Please advise your approximate location. Thanks

[@acorredorv]

That is so effin amazing! You certainly outdid yourself!

[@JUNET_Grt]

Mantab Brother, semangat sehat slalu, terus berkarya ... 😁 the best ..

[@donstelfox2936]

WOW, respect for your skills. Cheers

[@jobspeedmms]

from junk to this very valuable item.... salute to your creativity bro👍🏿

[@boxer5755]

this is so shoddy and yet so good at the same time, genuinely so impressive

[@Thocokhi-yy3mo]

Làm thêm làm mát bằng dung dịch nữa thì hoàn hảo hết nước chấm luôn. Like....

[@remonoyu]

Impresionante....ya tengo ganas de verlo rodando jjjj enhorabuena

[@chrisdunham2911]

YES!!! I asked for a V4 and here you are!!! THANK YOU!!!!

[@motomaniac1251]

Damn.. This Is Some serious high level Engineering stuff..!

[@achik_9120]

best bro.. congratulations not everyone can do this🙏🏻☺️👍👍👍👍👍👍👍👍👍👍👍👍👍🌟🌟

[@yayansigit2810]

just this afternoon I thought, never upload a video again, it's been a long time I've been waiting for the upload, when I open KZbin eeeeee... your video also appears. very impressive really like your video👍👍👍👏

[@austinmaxi]

I would love to see a revisit of the in line 4 engine you made, but with a cross plane crank mod for it like the Yamaha R1

[@dabuldahi]

My son and I adore your work. Kami kata pawer terukkk.

[@hasanbayramogullar380]

Selamlar dahinin üstünde bir yetenekli bir süper ustasın. Videonu zevkle izledim devamını dört gözle bekleyeceğim. Eline emeğine sağlık❤

[@ditzs_1773]

I didn't think that you could make a V4 engine, like the Ducati Panigale V4S engine, it was really amazing to me, or even everyone. I appreciate your work Le Dan I will wait for the next parts. and Hear how it sounds.

[@johnpartridge7623]

Great job mate 👍👍👍

[@opieshomeshop]

I'm really amazed at the level of skill here with not-so-great tools and an overactive imagination. I've spent 40 plus years in the shop and I watch this and think, how the F could I even do this. Good job. One thing I would consider doing is adding an external oil sump to increase the amount of oil this motor will carry and run that oil through a big sized oil cooler to help control overheating because you are going to overheat this for sure. Heat is the enemy of motors. Otherwise, I'm impressed as all get up!

[@abdulwahabsyaroni9666]

Halo, i'm from indonesia, you're my fav mechanic engineer, and i use legenda 2 / wave 100 , amazing !

[@davesherrell447]

Wow this man has amazing engineering skills. he should watch Allen millyard in the UK another amazing motorcycle engineer/ designer

[@kkusuwan]

What a great talent man.

[@roberthoward5015]

You sir are an inspiration to us all

[@rraji866]

Again your works is amazing Prof Le Dan, one thing mesmerize me, you think about the intake and exhaust perfectly.. I think you will use one carb for all 4 cylinder which is amazing you have plan it before.. Can wait for the camshaft works as the 2 cylinder on the back need reversal camshaft..

[@aassaammiigg]

คุณคือที่1ในใจผมเลยครับ 👍 NO.1

[@ToxicLion]

I really hope to see this piece of art be sold one day!! Would make a sick dirtbike af!!!!😍😍😍

[@petherherewilaa24]

OMG😱 | You are The Master Of Machine's Brokk, Love you from Indonesia 🔥🔥

[@elcioaparecidodossantos1361]

Incrível meus parabéns vc tem um dom que jesus e nossa senhora te deu use para melhorar a vida das pessoas vc é uma pessoa muito iluminada

[@lozanorules]

Hello from Spain ! Was visiting a few years ago your country , I should have found your KZbin channel before !

[@yusufabdrahman592]

Good ii boss LE DAN💪💪💪👍👍😊😊✅✅✌️✌️ part 2 boss

[@udel_bodong]

Skill home made 👍🏻👍🏻👍🏻

[@epriedy4022]

Salute.... I can't wait for the next videos

[@tanathosophiel7745]

Ufff brutal Amigó eres un profesional en lo que haces te felicito.. pudieras vender un motor de esos seria estupendo.. saludos desde colombia...

[@michaelthomas6797]

Very clever super talented 👍

[@victormasnure622]

IMPRESIONANTE TU TRABAJO!!! Saludos desde Argentina

[@pepito19842]

Good job bro..greatings from.philippines

[@tomasrufino3932]

awesome engine!! 👍👍👍👍

[@mematik2166]

Your totally amazing bro no words to say

[@mechniack]

Le Dan your a magician, 👍😁 but i like to see you convert a mc engine to diesel

[@peacemaker_kit_mattia]

you trying V4 this time! brilliant!!!

[@albertogoffi7490]

Mi domando cosa aspetta qualche casa motociclistica a farti una super offerta di lavoro. Sei un maestro!!

[@jokekelleey2071]

I miss it the first time I watched it but you took two engines and made one engine out of two engines amazing how does it work

[@Shadow0fd3ath24]

damn...this is incredible work, 90* flatplane crank v4s are my favorite engine sound by far. Building it so simply off the existng base was really amazing. You didnt go out of your way to overcomplicate it and kept a lot of the stock engines geometry and built outward

[@kunagtr]

Soooo much skills in one man..🤗💪👍

[@markallenarcano9439]

Present Bro from Philippines 🙋