I USED THESE OPTIONS FOR TILLING! Some of you may not even know these exist!

Рет қаралды 4,089

Күн бұрын

I USE THESE OPTIONS FOR TILLING! Some of you may not even know these exist!
▶️ Watch me mow here: • MOWING OVERGROWN Water...

Пікірлер: 49

@SteveNicoson-u1i 6 ай бұрын

Thanks for another great video. It was interesting and enjoyable. Good job of tilling the ground. Made the ground nice and smooth and ground up in good shape. Did not take long to do that. Nice tiller. Thanks for sharing with us Hank. Good work. Take care. The Iowa farm boy. Steve.

@hhamilton1970 6 ай бұрын

Thank you sir

@Daniel_Patin 6 ай бұрын

I only used my tiller one time since I bought it, I noticed it would jump a lot and did not till like I expected. After I looked at it closer, the tines were on the tiller backwards when I bought it. I flipped them around and going to test it out this weekend. I believe I'm going to run it in auto mode on my 494 like you do. FYI, your channel is the reason I bought a TYM.

@hhamilton1970 6 ай бұрын

Right on. Make sure you didn't buy a reverse rotation tiller if that's what you didn't mean to buy. Good luck!

@OutoftheWoods0623 6 ай бұрын

flower power! I like it,

@hhamilton1970 6 ай бұрын

💐🌻🌼

@robertshimmel 6 ай бұрын

Hank, First of all let me say thank you for showing those of us without ownership or experience with tractors or attachments like these how you use your tools. Your simple explanations and common-sense answers are truly helpful. In that vein, I was hoping you could answer a question that I have often wondered - Many people advocate that starting the PTO at just enough RPM to not stall the tractor is beneficial for the life of the drivetrain and tool. Once started, then the RPM’s are raised to run the implement. When you raise and lower the implement on auto mode, it seems that the tractor is still at full PTO power. Am I missing something? Does that rule only apply when the machine and tool are “Cold” (not been working)?

@hhamilton1970 6 ай бұрын

Yeah that's a great question. I do start my implements on lower RPM's then raise the engine speed once the "violent shake" of the implement is done. Crazy, I've never thought about your question as far as the implement doing that once the lift arms are lowered. Interesting. I don't really have an answer for you. But gonna research it and see if I can find someone who can give me a good explanation for it.

@NickJames-f2q 6 ай бұрын

Will my answer to that question is I really don't think it matters what RPM you start the PTO at I drove the tractors all my life growing up as a farm kid and we never had no trouble with no PTO or is the life of the tractor or none of that I don't know where that come from

@michaelthomas3014 6 ай бұрын

I go by the equipment being ran like a bush hog the blades are usually turned when you start which really can shake everything until they swing back in line so I always start them at low rpm just to help with the shaking but a tiller the times are tight to shaft so it’s pretty balanced so higher rpm wouldn’t matter the shaking begins for me using a tiller is when it engages the ground our ground is rocky makes for a noisy and shaking job lol😂

@hhamilton1970 5 ай бұрын

That makes sense to me

@robertshimmel 5 ай бұрын

Thank you all for the thoughtful answers!

@ralphriddle8864 5 ай бұрын

Good job and God bless y'all

@hhamilton1970 5 ай бұрын

Thank you sir

@robwelniak3765 6 ай бұрын

I have the little cousin to the T574... The 4820H, which I use to till a couple acres on my property. Question... With 300+ hours, how many regens in that Kukje diesel? Love the channel. Thanks for the content

@hhamilton1970 6 ай бұрын

I've had zero regens. I'll probably freak out when I get the first one. Lol. 373 hours on it now

@eckythump6429 6 ай бұрын

Was asking on Facebook the other day if anyone used auto PTO. It’s hard to tell from the video, does it cut in hard or does it do a soft start? Would you use it for a rotary cutter/brush Hog? Thanks for the video, enjoyed it 👍🏼

@hhamilton1970 6 ай бұрын

I probably wouldn't use it for a brush hog, as I always cut when I'm turning, but that's my personal opinion. When I drop the tiller back down, it isn't horrible. But I wouldn't consider it a soft start.

@eckythump6429 5 ай бұрын

@@hhamilton1970 that’s cool, thanks 🙏🏼 Keep up the good work.

@stevemartinez6757 6 ай бұрын

Nice tiller! Much easier than my walk-behind that I use for our garden which is about as large as the area of about 3 passes that you were doing.

@hhamilton1970 6 ай бұрын

I tilled my neighbors garden 50x150... he said "I'm gonna do it with my walk behind". And I was like "dude, I'll come do it. That's too much for that small tiller" took me 20 mins. Would've took him 2 days

@stevemartinez6757 5 ай бұрын

@@hhamilton1970 Our garden is probably about 20x30. It takes me around an hour to do it if all goes well (which almost never happens). At my age and health, I have to take breaks while I'm doing it. Good on you to help your neighbors out. I do the same when I can. Country living just can't be matched by city living.

@noonerstrickland1743 6 ай бұрын

Yes sir, get those flowers blooming

@hhamilton1970 6 ай бұрын

That's right!

@MichaelJones1527 6 ай бұрын

I'm glad you can translate for all of us North Carolina folk. LOL

@hhamilton1970 6 ай бұрын

lol. That's right!

@carlmauro4813 6 ай бұрын

I thought you were going to talk about the tiller! Like how deep in the ground you were going. I run my old Gravely tiller to 8" in our small garden. A tiller on my 574 would by way overkill. Even with the gravely I find that I have to go in both directions otherwise I end up with a duvet or low spot at the starting end.