How to Replace an EGR Valve - 2004-2010 Ford Explorer and Mercury Mountaineer

Рет қаралды 15,104

Күн бұрын

Пікірлер: 24

@HatBilly2008 8 ай бұрын

Great video, Just bought 2007 44, 000 miles from Florida. Love your videos. Thank you. Ho on my vehicles I use never ceases Greece. On anything I take apart. Because one it will stop the rust, and secondly if I have to take it apart again it will be easier. I only use very little, but it works wonders.

@seancobian8416 8 ай бұрын

Just wanted to ask. What was the full price of the 2 part motor rebuild. I am looking at getting a 4.0 bored out by .2 already and needs assembly and wanted to finish it from where it is. Crank, pistons are already installed into block

@gilsonmendes2237 Ай бұрын

Hello! I was watching your youtube videos on how to replace the EGR valve and I followed your tips on removing the main harness including unplugging the ECU harness and the battery cables. I also removed the throttle body to work easier but, when I put everything back together and started my 2007 Ford Explorer I realized my gas pedal won’t Rev up. It just stays on idle and then I plugged my OBD 2 scanner and I got a whole bunch of codes mentioning ECM and throttle position sensor. Can you help? Or is there any tips on how to get my vehicle throttle back to normal? Thank you

@verinb9 13 күн бұрын

I have the P0402 code currently. Does it matter if we go OEM or aftermarket for this part? I was also going to get a parts store part with a Lifetime Warranty. Did you ever have any issues after you replaced this part? I just want it to go away. It has my truck idling/running rough, like it's going to turn off esp when the ac/sound system is on/when I'm at stop lights and I have a loss of power.

@iamdjnam 12 күн бұрын

I went with the Autozone one and no issues

@verinb9 12 күн бұрын

Its been a while since you posted any videos, everything ok? Will you be posting anytime soon? 🤔

@sebastienlerebours9244 6 күн бұрын

I just replaced egr, all 4 02 sensors, and all spark plugs. Still getting map sensor code p0106. Any ideas?

@sebastienlerebours9244 6 күн бұрын

Still idling rough and stalling. Nitbsure what to do

@JunkYardDogNYC 4 ай бұрын

Thanks!

@jojoguapaoo160 6 ай бұрын

Video doesn’t work for a grand Marquis 😢

@mikewilliams9889 7 ай бұрын

Rather then fight with those 10 mm bolts right below them there are two bolts that hold the entire bracket remove them instead and save yourself a huge headache.

@armyguy5000 4 ай бұрын

I just tried, it doesn’t work due to the pipe that’s connected. I fucking hate this last 10mm bolt so much.

@mikewilliams9889 4 ай бұрын

You're doing something wrong the part that goes into the engine is very short and pulls right out.The bolts I'm referring to are below the 10mm.bolts.

@mikewilliams9889 4 ай бұрын

Disconnect that pipe going to egr