Wiring fog lights ADM Nissan Silvia S15 200SX Full Detailed Install. Factory switch, relay, fuse💡

[@cilviademo]

I might actually wire up my fog lights now, thanks for this

[@ianpgonzaga]

@@cilviademoyeah take your time and it'll all be working perfectly!

[@Gemeng87]

Are there any good quality aftermarket fog light brackets and place holders for the s15? I don't have fog lights but would like to install some if they don't interfere with my intercooler piping.

[@ianpgonzaga]

The bracketry to mount the factory fog lights should be built into your bumper (as long as it hasn't been hacked up).

[@jasonfernando1075]

Hey great vid can you do one for the rear fog light?

[@ianpgonzaga]

Is yours not wired up already ?

[@jasonfernando1075]

No I’ve just moved to the uk and it’s unfortunately a requirement to install one here

[@ianpgonzaga]

@@jasonfernando1075 ohhhhh right. THe ADM bumpers actually have the perfect spot for rear foggies. I'll take it apart and see if LED's canbe installed in it. Have you seen them with the red rectangles on either side?

[@s15melb]

The rear fog taillight option is very rare but you can buy the stalk and convert the drivers side reverse light as a rear fog like the factory option~!

[@ianpgonzaga]

@@s15melb good point. What if you got yashio tails LOL.

[@dalwinderbanga66]

i have connectors for the fog lights but i know have the fog light switch would it still work or i’d need to buy a indicator switch?

[@ianpgonzaga]

@@dalwinderbanga66 Hi. So you DO have the switch in your stall or you don't ? I think your msg has a typo...

[@mckirdyz]

Where did you get the clips that attach to the fog light trims??

[@ianpgonzaga]

@@mckirdyz there were clips already on the bumper , and the surrounds just have a hole that they attach with. Is that the part you mean or a different part ?

[@mckirdyz]

@@ianpgonzaga its that square like washer thing where you clipped onto the fog light. then you attached the black plastic fog light cover trim on. then you would've screwed 1 screw in to keep it fixed down

[@ianpgonzaga]

@@mckirdyz ohhhh that's a super common part you probably can find on any Nissan at the wreckers. They're called u Clips - they're used on the interior of the car too....look under the gear surround and the two screws that hold the centre console trim in place. same part. Google U Clip

[@mckirdyz]

@@ianpgonzaga thanks so much. my fog lights came with no trim so i'm having those ordered. will need those U clips them attached on

[@ianpgonzaga]

@@mckirdyz ahhh right. Cool cool! You'll get them sorted soon enough.