iBreeze CPAP APAP Machine Settings Menu Tutorial. ResVent

[@destinyk3612]

Omg! You just bought me a nights rest. I was able to adjust my husband CPAP and we both slept like babies! Thank you!

[@justcause9334]

If you are using the default hose that comes with the iBreeze make sure the setting in comfort is set to 19mm. Resvent ships the 19mm, but machine is set 15mm by default. If you leave it set at 15mm it will be load and have sporadic pressure issues. My machine came with a packing list that lists: Breathing tube/classic19/ 1.83m/Plastiflex P/N 50101-010001-00 I know he mentioned this but just incase someone missed it.

[@LarkinM]

Mine was set to 15mm thanks for telling me to check this, real life saver!

[@peggyellis1029]

YES. Finally. I was having the hardest time with my machine until I saw this. the therapist that set the machine up didn't even know.. Thank you

[@k.blackman6327]

Definitely a help. My son just got one and the apap makes him feel like he’s struggling to breathe and the medical supply place is absolutely NO HELP. Gave him a tiny mask, too. He really wants to try the cpap, so now I can send this to him and he can do it without the MS people!! Thanks!

[@veryberry39]

Hot damn, Jason. You've definitely made it on KZbin when you start getting spam comments on your videos! Congratulations! 😂

[@funnychile]

Thank you 😊 Just got the machine! Man I love KZbin!

[@StevieJayGamez]

thanks so so much.. been suffering learning this machine. This helped!

[@banger226]

Picked up this machine from my DME today. For a heated hose they gave me a hose that has a separate plug in transformer and switch. I wish I could have gotten another AirSense 10 instead. I’m a bit nervous about this machine.

[@misterben9880]

What up Lanky. It’s Pewp! Good content Brotha!

[@Freecpapadvice]

This video is garbage. Literally EVERY other video I've done is better.

[@misterben9880]

I watched a few. If I ever need a machine I’ll be eating this stuff up but hopefully that never happens!

[@granola45]

Help - Just got an iBreeze CPAP and the airflow is not steady but pulses in short bursts. No leaks, full face mask. Turned ramp off. Tried different settings but nothing seems to help.

[@MsAmazified]

I enjoyed your video but not sure if you mentioned a setting for average pressure during the night when you have APAP range. Please clarify

[@tarajones-legros3661]

Most valuable line:”Go ahead and suffer on APAP until you figure out that CPAP is better”.

[@Freecpapadvice]

😂 Did I actually say that? Sounds like something I'd say, just don't remember.

[@User-jw8kw]

Jason, where is your self repair video for the Dream Station 1, with the new casing available on Amazon?

[@wxfreak]

PM 2.5 in the tubing menu is for using a more restrictive filter. I have this machine it sucks. The humidifier is useless.

[@Kens1966]

I did the firmware update. After that a week later. I take the hose off my ibreeze to go to the bathroom. Now week later after the firmware update the air isn’t coming out nothing like before the update it’s like not even forcefull.

[@gasmeistr]

Jason, is there any news or progress on getting the OSCAR team to support the iBreeze?

[@Freecpapadvice]

I'll check. There were some things being done.

[@nealmcbaggins127]

I've been without a cpap machine for over a month and my BP is through the roof. My doctor gives me the resvent on a Wednesday. I had to take it back on a Friday because it isn't working right. I get it back same day supposedly fixed. I find out at bed time that it ISNT fixed and now I have to go another weekend without it. This thing is garbage.

[@MikeTan-h9v]

Hey all, those of you using this device are you using APAP or CPAP mode? Why does he mention that most people suffer on APAP mode first? If I want to try CPAP mode shall I start with low pressure settings for mild sleep apnea?

[@CherylGormanAuthor]

Do you need Doctor to be showing to look at a full page of your usage?

[@rookie779]

Does it have the foam like other machine’s inside?

[@cebruthius]

R-Care looks to be the equivalent of Opti-Start on Dreamstation Auto machines.

[@corygibbons5755]

I have this unit. It whistles somewhere around the connection to the unit itself. How do I get it to stop… (I am sexy) as it’s annoying.

[@xiashixiashi3175]

An air leak somewhere, 90% that lovely connector, really don't know why they design in this way... too clever...

[@cooloutac]

I have the same issue. Also my air instake latch clicks with every breath because its so loose. I had to put a piece of scotch tape on the corner to stop it.

[@TrishBlassingame]

This can be an amazingly bad machine. I've had it for two week and two days ago spent an hour onsite with a Rhema Tech. She found the machine wasn't even set to my Dr's prescription, pressures were way the heck off. Swapping to a much larger hose and having the correct pressure (for me) solved 90% of my issues. Before it "stuttered" so badly I coudln't use it for more than 30 minutes at a time, it would stop sending air and I felt as if I was suffocating. That's been resolved. Also, I asked for CPAP but she said that once programmed correctly APAP would be more helpful. I don't know about that yet. I can sleep at leat 5 hours now, yea, I can hear my breath while falling sleep and that's annoying. Oh give me back my Dreamstation!!

[@jeffreylylemason]

Hey mine was "stuttering" too. It was super weird. Mine is a bipap and is supposed to have "volume assured pressure support" I believe they call it EVAPS so I was thinking that the stuttering was a way to slow down my breathing. How did you fix the stuttering? I'm wondering if it isn't "on purpose"

[@TrishBlassingame]

@@jeffreylylemason A few days later I returned it to Rhema, told them no way I'd use it another day. Went back to my re-called Phillips until they send me a new one. I wasn't paying for a machine that made me so anxious. It never stopped stuttering and making me feel anxious - and I am not an anxious person.

[@chrispaul1786]

Jason, I know this is off topic, but since this is your most recent video, I have an important question. I am new to cpap, and I’m on my second mask. I started with a nasal pillow and couldn’t exhale at all, went to the Airfit N20, still cannot exhale at all out and struggle to breath when I open my mouth. Would a full face help with this since I am a mouth breather, and cannot exhale at all with the nasal masks???

[@cooloutac]

I had the same problem and went to a full facemask. I also have a weak exhale and even though I don't fully trust this machine yet I should note the pressure relief on this machine is the strongest I've seen.

[@apolca]

Same here, yes you need the full face one, but make it right size.

[@montanablue7960]

What does the p-mask fit do?

[@wxfreak]

Let's you "test" mask fit at a certain pressure, runs for a few seconds at the test pressure.

[@jeff-73]

Jason, are you sponsored by these people in any way and / or is your push for this product driven to encourage new vendors? I have to be honest, I am not giving this company the time of day until they open source their data. Closed source cellular transmitted data being reported back to a NEW company where I am not allowed to examine the data in its entirety will NEVER get my business. Also, these are the only videos of yours I won't watch all the way through until they fix this.

[@cebruthius]

I agree fully on the open data point.

[@cooloutac]

they come without the wifi or cellular modules in the US because they are not approved by the FCC yet. Gotta plug the memory card into your computer to upload the data. But just so you know, resmed and philips always sold all your data.

[@cb2291]

@@cooloutac thanks for that

[@Freecpapadvice]

Would you like a OSCAR data review with me? Check out the PAP Therapy Analysis at: axgsleepdiagnostics.com As an Amazon Associate, I earn on Qualified Purchases: amzn.to/3drPax1 Support this channel on a monthly basis: patreon.com/freecpapadvice Thank you for watching!

[@smikek1]

This machine is trash .I've used a cpap for the past 10 years. I usually get 2 hours the first Night and 6 the next only because I'm exhausted all day with this machine... im going back to my old machine

[@edwardelric8354]

Why suffer? Yeah u wasted ten minutes of my life

[@BattlestarCanada]

Jason, this machine is ugly as f. Too much complication.