Ice Cube Splash Animation | Blender Tutorial

[@jonnibasmaji9149]

If the liquid is falling out, try clicking on the glass(circle .002) and go to physics and enable planar (its under settings of the fluid)

[@riquepoppin]

what a legend

[@ammaramer8249]

you are hero

[@azeronautelexplorateur4597]

😩thank you

[@AnithingCinematic]

thanks bro for your help

[@EthanEnriquez]

why my water look like square?

[@yt.dipak3d]

For 8:30, after making a different object : "Tab" (Into Edit Mode), "A" to select all, "E" to Extrude Up and "Right Clicked" to repositioning where it was before then Pressed "Alt+S" [Move the cursor to scale it out along the normals] Hope this will work.

[@melorover6307]

Thank you for this

[@random-rand0m]

can u explain the passage before that?

[@gozzifilms]

Thank you. I was wondering why he skipped that part

[@lordeddardstark4471]

you're a Godsend

[@SketchEverydaY-rx7is]

thanks

[@blindershrine8752]

11:00 for those who can't see water object check on face orientation and flip normal by click object and go edit mode press A then Shift + N and try again.

[@lunfa]

Nice trick!

[@andrea.naharro]

thnxxxx

[@أسامةقصير-ي1ل]

The water go outside the Cup.. Why?

[@AhmedElbettachi]

@@أسامةقصير-ي1ل Go to your Cup Fluid effector settings and check "is Planar"

[@ladydarbanville2471]

I can't see water also it doesn't change drink colour to blue or anything. I tried this and didn't work. is there any other recommendation?

[@leljii]

Oh maaan, this is first animation that I got right 🤩 Can't thank You enough 🤩 Most of the video there was mouse buttons in the left corner, love when these are added 🤩

[@WoodMetalDesigns]

Just managed to make the cup and the ice cubes .unfortunately the animation is showing the ice cubes falling through the side of the cup once .First animation attempt on blender .Happy with the progress

[@gordonbrinkmann]

If you don't want to make your domain unnecessarily large to avoid computing unneeded empty space: since your splashes are not very high, you don't have to make the domain that high - it is not necessary to cover the ice cubes completely in their starting position. It does not matter if they start falling from outside the fluid domain.

[@artistsmind]

Right. In this simulation tutorials he not cover the crown splash. BTW it was a great tutorials.

[@gordonbrinkmann]

@@artistsmind The crown splash wasn't my point. In the video he says you have to make sure the domain covers the effector objects, but it is not and so you don't need such a large domain.

[@LtsVapor]

my fluids were just leaking out of my cube and bringing the top down fixed it so thank you

[@rjwh67220]

How cool. I appreciate you explaining what the steps are doing instead of just saying “click here, change this, change that.” Great tutorial! How would I make the cubes float in the liquid?

[@mars_gamez5045]

I'm not totally sure but I'm guessing they would just have to be less dense than the liquid.

[@tenebra9962]

I recently tried my first fluid simulation, and it worked nicely. I just wish my computer could handle them better, so I guess I'll have to wait until I can try it. Onto the list of things to try at some point it goes. Still an awesome video! Thank you fir your tutorials.

[@novak1387]

Thanks bro you definitely taught me a trick or two in your video and it really helped ❤❤❤

[@ruppy4103]

Instead of using the Transparent BSDF with the mix shader, you can fix the issue with the material by recalculating the normals of the glass. It looks heaps better too 1. Select the glass. 2. Go to edit mode 3. Select all 4. Choose Mesh>Normals up the top 3. Recalculate outside

[@ScarecrowWho_]

Thanks you

[@EasyWall_Qianjiang]

I don't know if normals have any effect on liquids(circle.001)

[@Necrocidal]

@@ScarecrowWho_ Beautiful result, thanks for the video. Also reducing the IOR of the glass material will get rid of some of that refractive and reflective weirdness

[@DrBoom-dm7rr]

you’re a Hero

[@srisanthcid6260]

Bro i love you i watch all blender animation tutorial videos but i no understand your video is christal chear I learn i love you bro again ❤️

[@iO-Sci]

That is a excellent simulation + visual ! 조용하고 좋습니다

[@WoodMetalDesigns]

Watched this last night ,great tutorial now going to try it out .

[@Bonbon.vr.]

lol same here

[@AlbertZhu-vx5uk]

At 11:07, if liquid is falling out, make sure you are in object mode. Hope this helps!

[@firebluesky-jc8sq]

what he doesnt tell you, is that go in liquid setting and turn on Planar, it will fix it

[@VideoLanxer]

@6:54 that is Select Face Loops Shortcut: Shift - Alt - LMB

[@graffechendiebiene3416]

thanks bro

[@rgarus]

If anyone is stuck at 8:30, you have to press extrude BUT DO NOT LEFT CLICK. Press right-click then afterwards Alt-S.

[@GhodFada]

I could cook with my pc after this Nice tutorial men really helpful

[@dreaxedits]

Fire tutorial.. LETS JUST do this!

[@nikhilmasram5566]

🤣

[@Miaaaaawww]

quick liquid won't show the water

[@peterszalai79]

Thank you for sharing! Very interesting and helpful video! ❤

[@_skrumcious_]

legendary tutorial thanks so much

[@RobertWildling]

I am having the same problems as some others here: The liquid is "running out" of the glass... seems like in the video you cut a step from your workflow. One question that arises is: Is the liquid object also a rigid body? Looks great, though!

[@khushzambare]

How did you solve the problem? I'm stuck there too

[@RobertWildling]

@@khushzambare Unfortunately I haven't. The maker of the video did not respond to any inquiry, not even an email...

[@sarahokoro3085]

​@@RobertWildlingI found a way. So, you click on the cup and go to fluid in the physics properties. Click on collision as the effector type and make the surface thickness 0.5​

[@RobertWildling]

@@sarahokoro3085 Thank you for sharing! Great that you found a solution! Will try t today! :-)

[@drsunshinegaming]

Maybe one could just take down the resolution divisions in the physics tab>fluid>settings. And rather change viscosity in the viscosity settings in the same module.

[@y_ss_f]

your a great teacher keep it up.. 💙

[@sturingnico]

11:35 Non so voi, ma per me l'acqua non rimane dentro il bicchiere, e ho rifatto ogni passaggio, il bicchiere ha il corpo rigido come effettore, e anche la parte che non stiamo renderizzando è fatta di vetro. Quindi teoricamente dovrebbe contenere il liquido prodotto. Perché esce dal vetro come se fosse forato lateralmente (per intenderci) ? I don't know about you, but to me the water doesn't stay inside the glass, and I've redone every step, the glass has the rigid body as the effector, and the part we're not rendering made out of the glass as well. So theoretically it should contain the liquid made. Why does it come out of the glass as if it were pierced sideways (to be clear) ?

[@firebluesky-jc8sq]

what he doesnt tell you, is that go in liquid setting and turn on Planar, it will fix it

[@wackywater7234]

@@firebluesky-jc8sq it doesnt

[@mihajlojovic8631]

@@wackywater7234 did you find the solution

[@-JUNIOR26]

Bro i created a glass but the liquid is falling out 😭

[@Wisdomonas]

Make sure you reduce the size of the quick liquid to match your glass....don't know if am making sense but that's what i did to contain the liquid on my glass.

[@kaalubruh331]

😂

[@mathsiseasy374]

Make sure the liquid size is just a little less than the cup....that's what helps me....click on liquid then tab to edit mode then alt + s then make size slight small just a little...hope this helps 🙏

[@gunasalima3760]

Increase the resolution

[@Cold0_yz]

You need make collision for your glass.

[@maxey2112]

Thanks, I learned a lot from this tutorial!

[@mingqing-jk9id]

Great tutorial but can you tell us how to make such a big splash

[@PolinaMakgrat]

Hi, thanks for the video . I have a problem on 6:47 When we need to do a (volume) liquid , I don't understand the algorithm

[@melimelo4948]

Same, I can't do it

[@melimelo4948]

Same ! I can't do it

[@wheelbitemedia]

awesome tutorial!! ... i only have one problem: my liquid just doesnt move at all :D what did i do wrong?

[@exodusmediasg]

Thank you for your time doing this tutorial

[@karadanvers6136]

if your ice cube doesnt work after you hit cloud, make sure you get out of edit mode back to object mode, then you should see the displacement on your ice cube.

[@BeyondBlender-d6l]

I recently tried my first fluid simulation

[@mertcanurcan]

I was just trying to find out how to roll ice cubes with a glass and liquid. I just stuck at the effector part - the water leaks from left and right parts, checked with flip normals then water splashes under the glass into the domain. All scales are applied. Does the effector domain for liquid must touch the liquid object perfectly? -Updare : Effector must be a bit bigger than the liquid object, normals facing to the liquid. Solved!

[@RobertWildling]

"Normals facing to the liquid" - what do you mean? How do you do that?

[@mertcanurcan]

@@RobertWildlingEffector object is copypaste+scale operation, normals (you can check it by visually from blender documentation - forgot the location) ALt+N to flip normals to the desired direction.

[@RobertWildling]

@@mertcanurcan Thank you for your fast response!

[@funkypossum6403]

@@mertcanurcan can i ask how you delete the box that appears when you use quickfluid?

[@mertcanurcan]

@@funkypossum6403 mate comment didn't pop up - so may be late reply. When you use quickfluid its a "fluid domain" it won't be rendered. But I forgot how to hide that :/

[@MF_XCIII]

but how to make the liquid splash high out of the cup like in the first render, i tried moving the cubes a bit higher it didnt change much

[@husseinsoufan507]

You should make the resolution of the water higher.

[@creatorjim]

Can’t wait to try

[@hotfix-v1.0.1]

Hi, I'm new to blender. I followed the tutorial and 11:00 I tried the simulation in object mode. However, my ice cubes do not fall into the bottom of the liquid, seemed to fall just a bit on top. I tried rewatching videos over and over again, but I still could not find what I missed. Any helps would be much appreciated.

[@lilkurisuna]

why when i quick liquid, not showing the blue vertices? and when i converting to mesh it nothing happen

[@adamprojektuje]

i have the same

[@Shina561]

I had the same issue with converting it to the mesh, but once I have clicked on "Mesh" in Physics and run the simulation twice it finally worked.

[@abhinavkrishna5599]

heee ruineedddd my dayyyyy

[@ThePeriodicTableOfElements]

the cuts were confusing. if I rewind I fear I might destroy my project. fairly explained, I just can't figure out why liquid is clipping through the cup. adding onto that, I can't find out how to access my video. 5/10.

[@mehmetcanturkeli538]

for the people who struggles about liquid leaking from sides of the object; pick the little cube on your liquid domain in object mode and make resolution number 64. Thats how i fixed.

[@fettlelifestyle]

Hello, thank you for sharing your knowledge. This is the second time i am making this project, but the fluid inside the cup keeps pouring on the floor

[@cecens98]

main cup needs a fluid physics with effector selected and "is planar" selected

[@DeepakSingh-pr3ry]

your way of teaching is very good but you can also explain which key is used why it will make you unique Explainer

[@hxnslshhax9011]

is it possible to make the ice float on water after getting dipped to make it realistic.

[@Tachastasiia]

truue - would be great to know how

[@smartinfo8722]

You're amazing bro, thanks so much, works perfectly

[@manuwaek7090]

i make this step by steps but i tried liquid part i can't fill the center i tried press E and its gone only one side how i move this liquid center (7.34minute part)

[@alktr_dz1527]

E +. S

[@CarolAnsaAidoo]

My liquid keeps flowing on the floor have tired using the normals to keep the liquid in the cup but isn't working

[@-JUNIOR26]

Mine too have if you find a solution pls share thanks

[@fruitmusic4825]

When I make a cup, I realize that my lines are not straight, and every time I pull the line up after E, the line changes direction, so how can I make a cup with a smooth sloping line like the teacher did? Thank you very much

[@divc56315h]

YOU CAN SKIP THE EFFECTOR OBJECT BY ADDING (TO THE ORIGINAL CUP) FLUID PHYSICS>EFFECTOR AND CLICK ENABLING PLANAR UNDER IN THE SETTINGS

[@no-ei4jw]

why glass not colliding creating a cylider that collides well but when i delete a face that doesnt checking is planner does not work

[@ankerhs1210]

A white kind of liquid is showing up in the glass when i render. How do i get rid of it?

[@yaman_lopo]

My liquid is not liquiding ☹️☹️

[@arjunmalviya.21]

thank you i learn too much from you

[@ShhefisShef]

If you do box in that ice cube you will Save fps but if will look little worse

[@hugovinhas1079]

Heyy, i made this on a 2021 MacBook M1 Pro and at the end it takes so much to render in cycles and it dosent come out as good. What can I do? How should I put my format scene resolution settings?

[@PastaMaster115]

Why is the origin point of each ice cube altered every time I play the animation? The cubes go in the glass and vibrate a bit and the origin points of the shapes are just swirling around in the glass. And when I reset the animation the origins are in the bottom of the glass still.

[@baptiste1900]

11:00 the ice cubes bounce on the water and don't go in, someone that's how I can do it

[@lucasprisun]

same pb need help

[@braap237]

control + zooms in and out for me

[@MrMan-vu8kz]

He meant + on the numpad if you have a full size keyboard. The key =/+ beside the backspace does the zooming in.

[@sinemapo3287]

Hello, thank you so much, I repeated the same thing, everything is fine, but I had a problem with the rendering of the glass, it is just white, although everything is fine without rendering. Can you suggest me how to solve this?

[@iveleyclaudius]

maybe try to change IOR settings of the glass

[@wot_noobclown5621]

Did you use eevee or cycles?

[@MarekMars]

Did you solve it?

[@stinkypunk-iy7ir]

great tutorial... 👍 my pc crashed tho :(

[@Thiago_Modder]

bruh, the liquid falls off , I don't understand one thing when he makes the first separation with the "p" he keeps the inside part but I get a new part with the inside part plus the extrusion.

[@GraphicCreation_Studios]

hello. using 4.2. im not going to give up. im having a problem with part of mesh. i doesnt look too liquid meed help man. thanks

[@mr.gorobchik4353]

What was the sim output folder created for? So that every time the animation was not rendered from the beginning ? Is it needed for final rendering ?

[@gribster]

11:07 my water go out from glass. idk why. mb someone knows why?

[@evkariot240]

On 7:30 I'm really stuck. When I press E and try to scale it inside, it just moves it around. Hope for your help!

[@slackyshadow]

Click E and S simulteniosly

[@anisakasymova4469]

@@slackyshadow it's working , but giving black color when we tapping TAB

[@aahritya_tv]

its out of context, but you got a great voice man! try VO for sure!

[@ИгорьИльин-ь4ш]

Excellent! Well done! 👌👍Very realistic

[@Lifewithsumiya]

Hi but i am trying for days but i cant make it 😔

[@HarshaVardhan-ml6lt]

my lil liquid is falling off the glass@@Lifewithsumiya

[@sepehrmagma7940]

im good till min 11 the quick liquid fall out of my glass can someone help me

[@jysn101]

its something to do with the collider we make... i deleted taht and just used my original glass and turned that into fluid effector... all works fine. ( i'm guessing the collider we make has issues with the normals or something.

[@firebluesky-jc8sq]

what he doesnt tell you, is that go in liquid setting and turn on Planar, it will fix it

[@soldierboy933]

Hi Man Very Impressive work how long did it take for u to be this fast any tips cuz i wanna learn pls ++ note if u have courses or discord let me know ty++

[@dodatkidominecrafta4762]

I have a question why rigid body in passive makes problems when i want to make a chain with physics i was using active without dynamic because passive was problematic

[@jysn101]

guess this is for intermediate users who know blender, A. non of my short cut keys seem to match the ones in this tut, ( E to extrude does nothing on my computer )so i'm left spending ages trying to figure out where the operations are in menu's, B my layout seems to be different so right away I'm not able to get past 1min 11, as i have no 'Add modifier' to the left. (found it under the Spanner tab in the end) i take full responsibility for this as i've been coming over from Maya and so set my theme to Maya...

[@gordonbrinkmann]

I don't know what you have done to your default Blender, but E to extrude is a very basic tool that's used in hundreds of tutorials... of course you have to be in Edit Mode in order to extrude some vertex, edge or face, not in Object Mode (because you cannot select parts of the mesh in Object Mode). And the "Add Modifier" menu (to the right, not the left) is of course under the "Spanner" tab (it's called the "Modifiers" tab for that reason when you hover your mouse over it) and that's where he is in the video. But you do realize there are different tabs you can switch between to get different menus? It seems you should probably learn the use of Blender's interface and basic tools before starting fluid simulations as these physics things are not the easiest to begin with.

[@kkarbokgaming4556]

@@gordonbrinkmann well said

[@TonyKureWorld]

man im stuck at the 8:34 mark when he said e to extrude the video cuts like something was taken out. When I try to scale it also scales up when i just need it to scale out so the duplicate doesnt go about the original mesh

[@hookerhillstudios]

figured it out. hold alt and s while moving the mouse to extrude.

[@jiyagodara4942]

press e then right click and the press alt s it happens then

[@danielr5112]

I followed the exactly the keys that he displays in the left part of the screen and it worked. It is better to play the video in x0.75 speed.

[@juliapietryka1753]

thanks!! @@jiyagodara4942

[@hannahlendman]

I'm stuck here too! And when I try to scale it out it also scales in and I cant figure it out

[@11WicToR11]

why would you change cache folder? It chooses some disposable folder on each operating system by default ...why would you collect those? Do you revisit old renders and use it then?

[@alexandregaiemet2014]

Why does water still go through cup? on 10:32

[@CarFusionCreations]

maybe the effector cup is touching the water part, try scale it up. if it doesnt work, start the simulation in object mode, it worked for me somehow

[@danfrissora5020]

Great tutorial, thanks!

[@henrietarubikaite1752]

hey, why does the water look boiling just before ice reaches the fluid? how to fix that?

[@airrow05]

How do I fix the cubes clipping through the glass?

[@airodox6593]

My ice cubes don't interact with the liquid, but the cup does, did I do something wrong?

[@karadanvers6136]

i dont get the bounding box when i type quick liquid. it only shows the liquid in the cup but there is no box to move. i rendered it and all the water is in a box outside of the cup. help pls

[@leewilliams3821]

This is a great tutorial, so thanks for taking the time out to teach others (like me) to achieve something similar in such a short space of time :-).... The only problem I have (and absolutely no idea why) is when I go to turn my object (the bit that is supposed to be the whisky in this case) into fluid, and add the physics, my liquid "drops" eveytime, and doesn't retain its original shape (like yours)... I've followed your tutorial precisely, watching many times, but even though I select the same settings, my fluid continues to "drop" to the bottom of the glass, as if effected by gravity... can you shed any light onto this? Like, I may have a setting that I need to activate that I am not aware of maybe? thanks, lee.

[@maliklab7174]

may be that's because of a bug in blender, are you using the updated version of blender?

[@TheBindoS]

Happens to me as well (Blender 4.0). Did you ever find a fix?

[@BRIIKSZ]

i followed everything but still small water droplets push out the side of the cup or the bottom

[@e3vert-u8p]

my water is going trough the glass and when i enabled is planar it just made the water to a small cube can someone help me?

[@mohamadal-lathif6677]

fun little things, it take hours..

[@jennaisela]

How can we save the animation? So i can keep watching the animation play back like a video to keep on my phone?

[@wot_noobclown5621]

Render the frames to a folder and then open blender video editing (file, new, video editing) and import the frames and save the final video

[@Rocket-Gaming]

Hmm, you lost me at F3 quick liquid. None of those quick options are there for me, I set my supposed to be liquid shape to liquid in physics but it stayed a solid. 🧐

[@dppoetfp1352]

Merhaba yarın bu konuyla ilgili ödevimi yapmam gerekiyor ama büyük bir sorunum var. Rijit gövde özelliğinin hangi karelerde olacağını ayarlayabilir miyiz? Mesela ben 700 ile 900. kareler arasında başlamasını istiyorum ama 1. kareden başlıyor. Lütfen bir çözüm bulabilir misiniz?

[@gameslayer8356]

The water simulation have some black particulars chose how to fix it I try by adding light and increase the max samples but this didn't fix it

[@siyizhu8001]

After selecting a circle on the bottom of the cup, what keys do I have to press exactly to gross select and get the volume of the liquid? I pressed Ctrl with a number but that doesn't work

[@handoko6065]

press fn + f3

[@juliapietryka1753]

and also check edit->preferences->input->emulate numpad must be on

[@christianaz2249]

Very Nice 👌👌👌👍😊

[@alexandregaiemet2014]

Why does water still go through cup?

[@cecens98]

main cup needs a fluid physics with effector selected and "is planar" selected

[@firebluesky-jc8sq]

what he doesnt tell you, is that go in liquid setting and turn on Planar, it will fix it

[@AkshayMusic-km2ek]

Bro what did you do at 8:32

[@AquaniteMinecraft]

Great tutorial but my ice cubes are not stopping inside the cup. It is falling through.

[@karadanvers6136]

to look thru camera he doesnt say it, but its View/camera/active camera

[@nourkasmi-st3mi]

when i press Alt + S to scale it out it makes lots of sharp shapes is there anything i can do to fix it?

[@Tachastasiia]

It might be that your Normals are not calculated. I had the situation when I was tried to extrude I could see a very weird form of shape with lots of sharp angles - you need to go into Edit mode - click A to select all vertices and then hit Shift + N so your normals would be recalculated.

[@GaryParris]

well done :)

[@Goshyn]

I cant get my cup as smooth as your is idk why

[@ninomancuso7021]

I'm trying something similar, but I'm having the glass animated to tip over. The fluid seems to seep thru it all around the outsides though, any tip on stopping that?

[@ashtonrepsold4408]

If the liquid is falling out, try clicking on the glass(circle .002) and go to physics and enable planar (its under settings of the fluid)

[@VRFS_games_offical]

Is there a way to fix the ice rolling out of the cup

[@Тётя-б8р]

у меня на рендаре виден этот грёбанный куб, который вода. Как это пофиксить?

[@WilliamTripp-sl7em]

When I go to render, it takes about 20 minutes per frame. Is this an average amount of time?

[@WilliamTripp-sl7em]

I figured it out in case anyone else runs into the same issue. My GPU was selected but was greyed out, so it was trying to render with my CPU. I had to go into the Edit dropdown menu and select preferences, and under the system, I had to choose Optix and check the box next to my GPU.

[@AlbertAravind604]

Liquid simulation not working, I have done exactly what you told

[@behumble122]

Did u find a way?