Icebear and hellcat carb tuning

This is a how to adjust your carburetor so it will start and idle. This is the SAME between the HELLCAT AND ICEBEAR. If you have questions and don't know, let us know on facebook with pics and we can tell you what is what to do Thank you
For bike parts go to-
www.motorxaccess.com
CARBURETOR-
www.motorxacce...
JETS-
www.motorxacce...
AIR FILTER-
www.motorxacce...
www.motorxacce...
For bike parts go to-
www.motorxacce...
For 125cc motorcycles go here-
www.venommotor...
Keep up to date by checking our social pages out down below
INSTAGRAM- / bbsg_bangbangscootergang
FACEBOOK- / bangbangscootergang

[@lvaz2922]

5 years later and we still love the videos... Wish you guys were still Bang Bang scootin around... ! Miss this content...

[@noahnmaster]

Thanks so much for making these videos, guys. Got an Icebear Fuerza myself about a month ago and I love it. Already started doing a couple mods (different handlebars, slip-on) but I've been a bit apprehensive to mess with the carb/full exhaust . Keep making howto's, these are great.

[@bangbangscootergang7702]

Noah Master will do!!

[@bangbangscootergang7702]

Got more on the way

[@radpaul2574]

Good point on the cable elbow removal to increase the slide travel. I had that problem

[@Siikmonkee]

Awesome vid guys, thanks for posting these. Just worked this out on my Icebear Little Monster (Razkull clone with the Icebear engine) - took me a minute to troubleshoot with the air to fuel mixture (backing off one and a half turns didn't open it enough, so the bike wouldn't even start. I had to turn the screw a little more. Still messing with the tuning on that.)

[@bangbangscootergang7702]

Siikmonkee thank you and awesome! Let's us know if you need anything

[@Westdawgg]

Such a helpful video thanks guys for the info!

[@ssanche88]

I wish you guys were close - I will pay to get these mods done for me 😩 lol

[@davidruvalcaba3928]

I plan on upgrading my carbs jets Did you change both jets in the carb or just the main jet?

[@brianhall2378]

Hey are the ice bear Fuerza good for wheelies

[@guydefabrites7590]

nice...what's link to carb and exhaust

[@chadlinkhart755]

RSP 150 cc condor 2021 need help finding stunt parts sub n stunt cage for this

[@GradysGeckos]

What needle clip adjustment do you recommend do you keep yours in the middle?

[@goodtripsonly]

I did this upgrade an my bike won’t start.. idk if it’s the idol screw or what..what would your recommend

[@ltbs350]

Could you send me a link for the carb, the links in the video dont work. Thankz

[@Cookyournoodle]

Thanks

[@evanm2831]

Have you had any issues with the clutch not wanting to go into neutral or any other gear at idle? Sometimes mine will not change gears unless I am moving. I cannot downshift from say 3rd to neutral at stop. One I get it moving it will shift no problem.

[@trexthepony8614]

I recently bought one of these bikes. The transmission wants you to be moving to down shift. Your best bet is to gently let the clutch out till it just bites then squeeze it in. Then you can shift to nuteral

[@madscottyp]

What do you do with the black cylinder, there's a hose tht goes from that to the stock intake manifold, it's eliminated with the new carb manifold.

[@dustinmuttscheler9389]

How did you take the metal elbow off of the throttle cable? When i turned mine around it idled real high and i didnt want to pry it off because i didnt know if the cable would still hold itself in there.. i have a hellcat

[@starsoundstudio8557]

are you guys in philly

[@330Powell]

Could you link me to where I could get different jets? Ordered jets and they don't fit...

[@LOL2YOU]

Does that screw on the bottom need to be screwed in? Guess that's the drain..

[@braappjey717]

That website y’all order your parts don’t work so on amazon what is it called can u tell me thank you

[@biggerdog12]

Thanks for the videos guys! Can you share the link to where you bought the bigger jets? Maybe brand and size too? Thanks!

[@bangbangscootergang7702]

biggerdog12 your welcome!

[@bangbangscootergang7702]

www.amazon.com/dp/B072X9W8L3/ref=cm_sw_r_cp_awdb_t1_9dmLAbDPR528A

[@marquisjames5710]

Pls help me I got a new carb for my bike and now it running like shit it start but I can’t give it no throttle

[@markhenry3403]

What top speed are you getting

[@anglegrinder4630]

is this bike 4 down or up? that down crap gets to me,UP is the correct 'feel' i know its PROB easier but it feels much sportier

[@hanaanhayat1257]

what top speeds do you guys get with the hellcat?

[@ezurmnd]

So i have a mini max 50cc top speed 35 how to make it faster?

[@werlder]

A bigger engine? Lol.

[@ezurmnd]

@@werlder I'd need a permit for anything over 50cc

[@JustinBurito]

did the carburetors come with jets in them already? and where did you buy the other jets from

[@Siikmonkee]

The VM22 carburetor typically comes with jets already installed. Other jets can be bought off of amazon by searching for 'Mikuni VM22 jet' - here's a link of the ones I bought: www.amazon.com/GOOFIT-Carburetor-Main-VM22-250cc/dp/B078YRMW3L/ref=sr_1_15_sspa?s=automotive&ie=UTF8&qid=1523740139&sr=1-15-spons&keywords=mikuni+vm22+jet&psc=1

[@theadventuresoftaco7306]

Y not film while actually doing what you're explaining. Noone can follow what the f u talking about

[@nofuture6881]

Heat from cyl. Head boiling gas in float bowl...

[@bangbangscootergang7702]

??

[@th3s41nt]

What clip is the needle on?

[@bangbangscootergang7702]

Jack Reacher clip?

[@th3s41nt]

BANG BANG SCOOTER GANG on the needle that sits in the carb slide the notches like currently mine is on the second notch from the top

[@bangbangscootergang7702]

Jack Reacher I'm still trying to follow. Are you referring the the throttle sleeve like the needle valve on top you can unscrew and take the whole slide out?

[@th3s41nt]

BANG BANG SCOOTER GANG yes the needle that sits in that slide that you pulled out of the carb barrel when you were telling us to make sure it goes in the slot correctly, That needle has about 6 slots in it and a c-clip that holds the needle, And I think you were talking about playing with that if the jet isn’t big enough, Also you said run a 115-120, But didn’t say what jet you were actually using, So should I run a 118 to meet it in the middle? I have the same carb and the ZOOM exhaust

[@MACHO_DIECAST]

Okay I’m on a streak of bad luck please bro me anyone my carb is leaking gas what I do ?

[@seanmartinez472]

i wanna buy one in a few weeks i’m just worried how fast it will go

[@bangbangscootergang7702]

Sean Martinez stock max rpm it'll be around 47 50 mph. So replace the front sprocket to a 17t sprocket and it'll go 65 Max rpm. So mid rpms you'll do 45mph comfortably and great cruise speed.

[@seanmartinez472]

have you put on the 17 tooth front sprocket and gotten to 65?

[@bangbangscootergang7702]

Sean Martinez oh yeah on straight rd

[@seanmartinez472]

can you send me a link to the sprocket

[@bangbangscootergang7702]

Sean Martinez we have that on this bike and the hellcat and both go that speed

[@jasonjulian1]

The video has good content, and helpful tips for those who don’t know… But for the love of God you two should decide who’s going to be doing the talking. i’m not saying you need to script it out, but at least set some ground rules when producing a how to video where the instructions need to be clear, concise and well articulated.

[@anglegrinder4630]

Do these mods right off the bat,once you break these in theyre better off as is EXEPT a pipe you can always mufflize

[@johnscott8846]

I need to get one help me find one help lol

[@BillFromHalifax]

You guys make any videos when you ride the friggen bikes?!🙄👎

[@beatnuts323]

Where did the hose that cane from the air box go to ?

[@Siikmonkee]

If you're meaning the main hose, it's replaced with the cone filter. If you mean the hose that runs to the back of the engine (crankshaft), that is simply a venting hose. It doesn't need to be connected to anything and can more or less hang to the side.

[@beatnuts323]

Siikmonkee wow thank you so much bro !! And yes it was the venting hose. Need to make it longer since it spits out a little bit of stuff

[@fiddyfresh3156]

Hey Gary I just did a mod on my icebear little monster with a new exhaust should I change the carb?

[@adamnadu1994]

Fiddy Fresh yeah the stock one is not good. Put the new carb on and trust me, you'll love it more

[@fiddyfresh3156]

Awesome I will order Thanks bro...😁

[@MACHO_DIECAST]

Can you help me please my carb is leaking gas. Please help!!!

[@beatnuts323]

Can you send me a link to the upgraded jet pls !:)

[@marquisjames5710]

Werd pls