Those gearbox clips are great, made working on V2 and V3 gearboxes so much easier for me 👌
@noldevin8 ай бұрын
Ahh nostalgia, the ICS MP5 was my first AEG. Never messed with it but it cracked the front end of the gearbox off. Then my cheap replacement box never quite worked right. Wish I had your videos 15 years ago
@opasan1178 ай бұрын
Thankfully we got them now
@AirsoftTipsandReviews8 ай бұрын
ah, Chef.... he was a great character. And that movie had so menny great songs
@yaanno8 ай бұрын
As someone who built valve amps (not airsoft related I know), 100% agree on a proper selection of tooling. Cool vid, again.
@Firefox-cr3jw8 ай бұрын
You are like the dad of airsoft. Not that you are old, but you seem to have a massive knowlege. Cant wait to finaly send u my Krytac P90 :O
@egon28758 ай бұрын
I worked pharmaceutical years ago and they bought us nice shiney magnetic trays to keep all the bits in....only they were all stainless.... Lol😂
@juliusjones78768 ай бұрын
Great video especially whoever was singing the outro song. There voice was magical. Wink wink. A video on tools and advice would be cool. Take care man and watch were you put your fingers.
@wyshtechairsoft8 ай бұрын
Nice job on the MP5. Night and day difference on the gear noise. SOOOO much better and nice catches on the mistakes the previous builder did. Also! You and I have identical tools. Feels like we have the same taste haha.
@themaniac58648 ай бұрын
Ty for the last bit... Nice easter egg
@rogerborg8 ай бұрын
Salty chocolate Easter egg.
@Solidsnake02088 ай бұрын
Totally get what you’re saying about not gluing bushings in, but I would say there are scenarios where it makes sense on cheap gearboxes. If the gearbox is new, the bushings centre fine but are slightly loose, then glue them in and they won’t spin and knacker the shell. It does mean the build takes longer overall especially as I find to get the best results, you need to leave them to set overnight. Whether that’s viable from a business point of view Depends if you can be getting on with over things in the meantime. As for expensive centering tools, you can just use an old broken gearset and shim it tight, works great in my experience.
@mgrygorczuk28 ай бұрын
hidden song! nice
@apathtrampledbydeer84468 ай бұрын
It startled me. XD
@jamescameron68198 ай бұрын
One of my favorite songs
@TheAngryPlrate8 ай бұрын
even the best designed shit in the world has been through 11 chinese sub contractors who all want to make their extra on those parts
@AidanMyne8 ай бұрын
I know its a bit naff and unrealistic but something i liked about the old ICS MP5s was that you could mount their laser unit in the cocking tube.
@jorgeemidio75078 ай бұрын
I'm looking for those clips. Where can I find them? And yes, you should make the video about the tech materials. *In Europe
@xtairsoft8 ай бұрын
Ask your local store to contact ak2m4 airsoft or ask Luke nicely
@dishs0apcustoms4498 ай бұрын
I personally don't glue the bushings in unless the hole is loose or its a nice box like a ra. Even then I use loctite 638 and shim the gears and everything else before the glue dries. I leave the case closed with the gears inside wile it dries after to make sure everything is in alignment.
@jesperkuipers94328 ай бұрын
I would love a tips video (14:00)
@andrewblackmore31508 ай бұрын
Wrapping my Christmas present no doubt......
@AdamHoy818 ай бұрын
Top vid mate, keep up the great work 👍
@punishedhek74958 ай бұрын
nice, had one of these back in 2004, 20 years ago, this was my first high quality AEG back in the day.
@bumsausage57918 ай бұрын
C Marriott
@josephnowak68027 ай бұрын
My 2 favor would have to be the MP 5 and the P90
@airsoftuniversity8 ай бұрын
Random question - but do you announce when you'll be posting a premiere anywhere off the site?
@NegativeAirsoftTech8 ай бұрын
Nope
@NegativeAirsoftTech8 ай бұрын
Adds to the mystique.... keeps me hidden in my own grotty corner of youtube.
@airsoftuniversity8 ай бұрын
@@NegativeAirsoftTech Haha well fair enough! It's just YT has been lacking with the notifications so I end up late/missing them a lot even if I was available. It's a shame because I do enjoy being there for them live, but I respect that! Until next time 🫡
@Philtoid8 ай бұрын
Who cuts celotape with a blade. Use ya teeth lad
@rogerborg8 ай бұрын
Truly, a Frenchman would rather lap bière out of a glass like a dog, than drink it out of a bottle like a Spaniard.
@hoecage87818 ай бұрын
9:20 when I thought I've seen it all...
@seanmccann16918 ай бұрын
I know you hate r-hops. I went looking for anything that was easy and cheap that would help with maple leaf barrels since the window is a weird shape r-hop patches are just not an option I found s-hop aka sugru mold with a omega nub is super easy to make and soft enough to grab the bb perfectly. I told my local shop they had never heard of s-hop but tried it and now sell pre s-hopped barrels.i thought you might want test it out and maybe put a video up saying if it's shit or not it's definitely easier then r-hop patch probably about as good as a mr hop. But would like to know what you think.
@01Joemama8 ай бұрын
If theres a barrel and a hope up where a flat hop is needed which one would you say neg? If any lol Nice one for the episode
@Creationeer8 ай бұрын
Imagine being the owner showing his friend this 😂who's the asshole in that situation?
@MagnustheJust8 ай бұрын
Yes.
@cmarriott38358 ай бұрын
Bum sausage
@ck25038 ай бұрын
Are you in the UK or US? I have a KWA tech 9 you'd just LOVE to work on....
@Xarl-VIII8 ай бұрын
my ics Mp5sd snapped at the receiver and charging handle a few weeks back, gotta be careful
@michaelmccr32948 ай бұрын
You know what we Need luke is now to review W.E F17 from Asia electric guns as from videos on etc 5 year ago they were bad but I found a video that actually shunes the bad ones and is the main reason why I Brought one, it can work in winter weathers........ fully work and teen the person holding it and holding the camera were absolutely shocked it worked even when they buried it in a now for 30 mins and still work and use a mag buried for 40 mins and yes still work with the exception of lose fps but very little bit. I wad wondering why a £110 f17 with is the m17 can out proform the vfc one and thai is the secret from W.E they used a gas blowback system slide similar to ghk glock so that means the housing is cylinder and nozzle is the piston.... it work so well even cybergun that trademarked vfc is to this day still regretting going with vfc 😂😂😂😂 it's amazing how laoda say grt m17 grom vfc which costs over £250 when W.E version costs £110 and it realible in cold weather's now and you don't need worry about nozzle springs too as this g17 has a kick more then vfc and yet there hop up unit works
@iceilator8 ай бұрын
I have a split gearbox ICS MP5 with the 3 rd burst, and I live in the US. No one near me can work on one and Idek if I can get the parts, would you be able to take a look at it?
@MagnustheJust8 ай бұрын
Re : 7:40 - DRINK!!
@anthonywood96328 ай бұрын
Like watching mr burns, Smithers
@corpex1868 ай бұрын
When’s the album coming out?😂
@spl1nter508 ай бұрын
another quality vid 👍
@TheWolvesCurse8 ай бұрын
hmm salty chocolate balls
@xyr1n5958 ай бұрын
What rings was it you put on the springguide to bump the power up slightly? shims? And does it matter if it's a springguide with bearings or not?
@NegativeAirsoftTech8 ай бұрын
I just purchased 500 brass collars of varying internal & external diameters
@xyr1n5958 ай бұрын
@@NegativeAirsoftTech Clever. I got a gun that i want to bump approx 0.1 J and im sure this'll do the trick. Pint coming your way
@TK78378 ай бұрын
What's with the motor base plate, looks to be not flush 🤔
@NegativeAirsoftTech8 ай бұрын
It's an ICS, they have big fat ventsthst don't do anything.
@samuelvaladez29188 ай бұрын
Why do you say DSG's are old and not good they shoot twice as fast and can be just as reliable if built correct? no hate just a genuine question.
@SupremacyDealer8 ай бұрын
I have a question. Y is my gun shooting left if the nozzle aligned w the barrel?
@peetukarkainen4778 ай бұрын
Hey, what do you think about retro arms cnc hop up? Is it any good?
@MagnustheJust8 ай бұрын
I have an AK one in my CYMA RPK... I have had it in there for almost 6 years now, and have not had to adjust it once since then.
@MercutioUK20068 ай бұрын
Sellotape - it's treacherous stuff mate.
@user-xs2xe6kv8k8 ай бұрын
Opinion on asg hera arms sss (its an ICS) I have heard really good things about it Is it atleast reliable?
@jhqtech8 ай бұрын
I have an interesting problem. I installed a clicker in my mp5 dsg and while the trigger acuates perfectly the auto rof has been reduced from 50rps to 10. Nobody ive spoken with including perun has any idea why. Thoughts?
@NegativeAirsoftTech8 ай бұрын
Not possible by using a clicker, that's not how it works. Likely something is touching your gears
@jhqtech8 ай бұрын
@@NegativeAirsoftTech I appreciate your response but its 100% the clicker. I uninstalled it and reinstalled it several times. Each time its installed the rof is reduced, and when its uninstalled it returns to normal. No aspect of the clicker or trigger can touch the gears so it has to be some interference with the etu caused by the clicker. I've tested the movement of the sector gear with the clicker installed and there is no irregular contact on the gear or tappet plate.
@NegativeAirsoftTech8 ай бұрын
Not possible. The etu controls it, you did it wrong ;-)
@NegativeAirsoftTech8 ай бұрын
@@jhqtech did you see a ROF change? Is that pelting on a 7.4v lipo? It is. I'm out on the piss but the perun hybrid controls everything aside from trigger response. More practice required ;-)
@Saponiboy2278 ай бұрын
Chocolate salty balls 💀💀💀💀
@connorburley48318 ай бұрын
Any recommendations to improve the consistency of the hop up on these? I find using 0.3s the hop un adjusts itselft after 40/50 bbs. Thanks!
@jhqtech8 ай бұрын
Put a small oring under the hop arm screw. Aks suffer from this sometimes as well
@TapRackBangAirsoft8 ай бұрын
Who else got the easter egg at the very end of the video
@gregoryfranks73478 ай бұрын
quick queston luke, does this model not come with the 3 lug or has it been changed? doesnt the mp5 a4 mostly all have the tri lug? fuck, alright 2 questions, i have a avalon mp5a4. i tried to buy a a5 stock but the only way to get it buying the whole a5. vfc taiwan couldnt sell one to me allegedly. how hard would it be to alter with a dremel this stockto work. just the flat surface on the outside of the rail slt makes it so much better it makes my balls tingle. i know im a twat i hate the o.e. style. furnitre on any mp5. im a twat and dont care my magpul and thumbpaddles are awesome so is my semi straight trigger. screw blasphemy it looks the tits and is so much more user friendly. if you get a chance id be much obliged for info cheers mate. can you mail me some cadbury flakes if i send you my replica for work? customer service seems your forte.
@Solidsnake02088 ай бұрын
Buy the VFC MP5 GBBR stock
@gregoryfranks73478 ай бұрын
@@Solidsnake0208 I will take a look. I was told that the only stock that will fit this is the one from the a5 or o.e. so I will definitely check. I'm going to dual wire it so I can put on either stock and a battery in the front or rear. Because it would suck to have to compromise with it just rewired to the front. Cheers for the tip I'll be considered this like stink on s**t
@gregcakagonnamakeutakit8 ай бұрын
Can you show the difference or a close up on gears that are a good fit an gears that are shit.
@peetukarkainen4778 ай бұрын
Hey, what do you think about retro arms cnc hop up? Is it any good?