OM642 3.0L V6 CDI BlueTec Fuel Filter Change

In this video Corey from IDParts replaces the fuel filter on a Mercedes OM642 engine. The vehicle in this video is a 2011 R-Class, but the procedure is largely the same for any model that uses the OM642, 3.0L V6 diesel engine including:
2007+ Sprinter Vans
2007-2014 E-Class BlueTEC
2007-2015 ML Class BlueTEC
2007-2016 GL/GLE BlueTEC
2007-2012 R-Class
2007-2008 Jeep Grand Cherokee CRD
IDParts carries all the different versions of the OM642 fuel filter and stocks all OE MANN-FILTER units here:
www.idparts.com/advanced_sear...
www.idparts.com/

[@paulwharton1850]

Excellent video - so clearly explained. Many thanks !

[@ambulancekidd]

Many thanks for a very informative video & may I congratulate you on excellent filming & explanations of the process. I have a 2013 R350 non Bluetec here in the UK & the filter is due to be changed. I had been worrying a bit about it but, your video have given me peace of mind. Robert.

[@AlliantPowerMktg]

Great video sir. And what a great sticker on that tool box!

[@chris4321das]

Great video - thank you!

[@MrHE2207]

Great video !!

[@romero10374]

All I can say is thanks you and perfec.

[@Sabuz73]

Can you please post video Air Filter change for GL 350 BlueTec 2011 Diesel engine? Thanks

[@richardwhite3522]

Hi great video I had a fuel leak develop after a major service and took my 350 ml to my friends garage quick fix as service engineer had not fit the fuel filter properly. My friend noticed that the air intake prop on the turbo was very worn on the edges and had many groves in the blades he has told me that the turbo needs replacing ASAP . Is his information correct as he will make no money as Mercedes do any repairs.

[@StpBks]

Is there any inspection of the old filter to see if there was any contamination?

[@michaelgoodwin5162]

Thanks for the vid. Several times I've had to replace the rubber lines that connect to the fuel filter. Do you know what PSI hose is required? I have the 01 filter. TIA

[@dandaremk9304]

What pressure is the fuel filter running at if you are using spring clamps , wouldn't it leak?

[@DeneSolomon]

Many thanks for your comments. I have a X350 mercedes ute with a fuel problem. Q where is the filter and how many. also is it difficult to change. Regards Dene

[@sami9557]

I have the same engine and i have to change the fuel filter too, i heard that new filter would need to fill with fuel before changing. But probably there is no need to do that?

[@navigator1383]

Do you open black bleeder screw while priming filter?

[@joabescobar4919]

Any video replacing injectors fuel pump!? Thanks

[@jacquelinellewellyn85]

Hello. Happy you made this tutorial. I am thinking about purchasing a 2012 Mercedes Benz ML 350 BlueTec. I wanted to find out how long it took you to change the fuel filter. I am sure the Mercedes Benz dealership probably has not changed any of the filters. I will be test driving it on 4/9/2018. If you think I should no anything else about this vehicle; please let me know. It has just over 100,000 miles. Thanks for the info.

[@ccacace1]

Hi, Im curious to know if you bought it and if so, what has been your experience? I just bought a 2012 R350 diesel with 165K drove it from LA to Dallas with no problems. Had to do basic repairs like camshaft position sensor (easy), fuel filter line was leaking so put temp line and ordered new lines and filter. By far, replacing box air filters was a bear. Let me know. Thanks

[@ELCEV]

2014 GL350 is much more involved, please video it if you ever get one to change. Thanks

[@alinizamdin]

Hello !, Thank you for the very descriptive video. Do you have any video on how to change Transmission fluid and filter on the ML350?.. I have a 2010...

[@idparts]

Yes, I made a video about that, just look at the channel for 722.9 transmission fluid change!

[@paulkemp8784]

Hey thanks for the great how to video! I have a question for you if you wouldn’t mind replying back. I have 2011 diesel ML300, that’s has been stationary for nearly 4 years. Would I need to drain/Siphon the fuel or would it be ok to run? Should I replace the fuel filter straight away or after filling her up with fresh diesel?

[@lumberjackdreamer6267]

Remove the oil fuel. I:stall new filter.

[@MrArmiani]

I have the same OM642 engine and was told that I have a fuel filter leak. Do you think it;s caused from a clogged filter/broken O-ring or simply maintenance. Car has 67k miles with original fuel filter. thank you!

[@FredCarney]

Good narration. What brand of gloves were you using?

[@idparts]

www.idparts.com/100ct-heavy-duty-orange-nitrile-gloves-p-4814.html

[@irshadhussain6720]

Hi Will u please let me know what is the exact part number and style of fuel filter for 2011 Mercedes Benz gl350 blutec 3.0 turbo Thx

[@bvkaszta]

Hi there, is it possible to install the filter "3" the newest instead of filter "2"? in 2010 R350.

[@barrettabney]

The W166 engine has a T on the turbo 2" pipe that blocks the fuel filter access completely and makes this a completely different headache. Is there a video for removing that entire 2" pipe?

[@hermesalejandrocerdenia1153]

I just bought a 2009 ml320.bluetec.. Are you based in.Los Angeles, Ca?

[@elviosonda5887]

Boa noite! Qual é o número da borracha de conexão de entrada do turbo? Obrigado!

[@sciroccs]

Great video Corey. I have read online that there is a computer reset that needs to be done after the filter change. The source of this info stated that the engine control module needs to know when the filter is changed so that it can calculate the filter life cycle? The source also said that if this reset is not completed, that the engine management system will activate "limp mode" because it thinks there is a dirty fuel filter in the system. Can you confirm if this is true? I have a 2013 ML350 Bluetec. Great video, thank you so much! Can you post a video on how to change the serpentine drive belt on these models? I'm still recovering from sticker shock after the dealer charged me $260 to change this belt.

[@idparts]

I'll have a serp belt video in the future for sure. You need to reset the service interval in the cluster or it will say you are due for a Service B before you actually are. Easy to do. Lots of vids on here for service reset procedure.

[@sciroccs]

IDParts.com Thanks:)

[@erichervedontongtonfack4386]

My Mercedes is a gl 320 bleutée 2009 what filter do I need thanks

[@NoBaca]

There is a third hose at the five pin connector. How do you remove/reinstall it? I didn't see any clamps on it. Thanks.

[@idparts]

That hose is for water drain. It has a squeeze clamp on it if it is removable. On some models the hose is not removable and a new hose comes with the replacement filter.

[@alper1214]

The Original Mercedes clamps are the Best. All other clamps damage the line and then it leaks Diesel. The Original clamps can be use after 100 Diesel Filter changes.

[@blakebiltwell5]

Fuel filter? For 2014 e250 BLUETEC sedan WDDHF0EB8EA946303

[@olgerlickollari5347]

I have GL 3.0L V8 2016years..what fuel filter do I need

[@mightyturk6222]

So you don't have to fill the fuel filter with diesel first, simply turning the ignition on waiting for a while before starting the engine fills up the fuel filter?

[@idparts]

Thats right!

[@brucehu6227]

Can you do a video on om642 diesel purge? thanks!

[@idparts]

I'll put that on the list!

[@hermesalejandrocerdenia1153]

How many miles before you change the fuel filter on a OM642 engine?

[@yehmustafa2959]

20,000 miles

[@billmurray3019]

That turbo as too many oil that mean the crank case separator is Bad

[@screwstoneboy93]

Is this the same for 2008 Jeep Grand Cherokee equipped with 3.0l crd diesel ??

[@idparts]

Yes.

[@67Gokcebey67]

Hi what is the Intervall at this fuel Filter? i have now 107000 km on my Engine thank you

[@brucehogan2926]

40,000 miles

[@StephSie-fj8lj]

Would having bubbles in the lines cause the car not to turn on??

[@idparts]

Possible. Some air is normal, a lot of air is not and will cause the system to lose prime.

[@edysinsimon8646]

Fuel filter for the 2017 sprinter V6 please?

[@idparts]

The process is basically the same. Filter is in the same location.

[@jahrain1693]

Please what is the name of the sensor or motor under the turbo charger

[@idparts]

Under the fuel filter? If you mean that its the intake flap servo motor.

[@jahrain1693]

Can I bleed the lines one one

[@arttupiira9282]

The system is self-bleeding.

[@jbjlock26]

What is the best way to remove the OEM Mercedes pinch clamps?

[@FredCarney]

Buy a $10 pair of pliers off ebay. simple using those.

[@jbjlock26]

F C That's exactly what I did. Well, I bought the $20 version. Amazing how easy it is to open and close those clamps with the right tool!

[@alicejohnson7078]

What filter goes on vin wdxpf445789371022

[@epad1990]

Yeah first comment

[@StE_sufc_1889]

Great engine my arse... What bout the swirl flap problems!! Bull shit idea how they fail an are buried in the middle how you can't get to them.

[@Phil-D83]

Needlessly difficult. Should be on the side

[@adrianmccann6428]

It is possible to use,spring clamps more than once. You're more of a salesman than a mechanic.

[@momojo3459]

Which is what he said, check again at the 4:30 mark. The original Mercedes "squeeze clamps" are one time use and he recommends you replace them with reusable spring clamps.