Just ordered a uic receiver set yesterday haha. Hope I like it as much as my radian adac lower.
@armandgun3 жыл бұрын
Damn, I could have saved you 10% with my code. ARMEDCANADIAN or ARMANDGUN should work. I’m a big fan of Radian as well.
@LîNkxUSMC3 жыл бұрын
@@armandgun i usually just use military discount codes but ill be happy to use yours in the future to send a little piece your way 😉
@armandgun3 жыл бұрын
Hey thank you for your service 🙏🏻 I appreciate that! I don’t get a kickback from adm, but I am a big fan of their rifles and expect they will be more likely to work with me again if they see people finding their product via my content.
@mlentsch3 жыл бұрын
Did yours take 3 months, too? How do you like it compared to the radian?
@LîNkxUSMC3 жыл бұрын
@@mlentsch it actually only took just under 2 weeks to ship out for mine haha. The radian is a little more refined but the adm is still really nice. It is nice to be able to lock the bolt back with the ambi control without dropping the mag though. Overall i like them both equally.
@rmossman883 жыл бұрын
Being able to travel out of state with my ar or ak is the main reason for having a braced pistol. I have a concealed carry permit and can conceal it and have it loaded as long as the state I’m in has reciprocity with my state. Some states have laws against having a loaded rifle, so this fits a niche.
@abolishtheatfandrepealthenfa2 жыл бұрын
Same
@NathanJorgen7 ай бұрын
Idk the exact legality of concealing a rifle in nc, but if you have a cc permit to conceal a pistol, a rifle with a brace will fall under this category too
@DistrictSoundLab3 жыл бұрын
It’s amazing how much better the 13.9 feels than a 16. Night and day. Honestly I like it even more than 12.5 ADM. The extra rail space is nice and being able to use a stock and VFG is so clutch. Also like the extra velocity and especially the mid length gas. So incredibly smooth. I dare say it’s as close to perfect as it gets.
@christopherkey348815 күн бұрын
Did you find yourself wanting for a 14.5 over the 13.9 at any point in the last 3 years? Was criterion’s 13.9 mid equally reliable across the board compared to their 14.5 mid?
@DistrictSoundLab15 күн бұрын
@@christopherkey3488whoa I can’t believe that comment was 3 years ago. Happy to say I fully stand by that statement to this day!
@DistrictSoundLab15 күн бұрын
@@christopherkey3488meaning yes totally happy with 13.9 core. Both length and profile
@ronin21673 жыл бұрын
I have an ADM UIC Mod 2 build, but I went with the Geisslee URGI rail. I SBR'd it and put an 11.5 BCM barrel on it. The BCG is also ADM. I decided to make it tough so I had the Geisslee gas block pinned. It's my go to as well. Oh, and I agree with you. I don't care what Radian says, their lowers are not fully ambi. LOL
@jasongaudreau20753 ай бұрын
Got myself an adm4 (smooth sided) receiver set to start my “battle axe” build. For no I’ve got an sbr sig mcx spear .308 (13”) because for another $750 sig sells the 16” barrel and block combo for a great piston rifle setup.
@offrosterhandgun52953 жыл бұрын
ADM makes a great AR. The only issue I’ve had with mine was withtheir lightweight castle nut breaking lose. I changed mine out for a PWS ratcheting castle nut.
@ronin21673 жыл бұрын
I actualuu had a rear takedown pin retintion pin get hung up and when I tried to get it to go in it wouldn't, so I rapped on it and the pin actually broke through the inside of the lower where the retaining pin and spring go. I tried fixing it with JB Weld, but that didn't work. Now I'm going to try amluminum brazing.
@offrosterhandgun52953 жыл бұрын
@@ronin2167 That happened on an ADM lower?
@ronin21673 жыл бұрын
@@offrosterhandgun5295 Yes.
@BrianR-ML3 жыл бұрын
"For me, my ideal length is between 11 and 12.5 inches"... 🤣 Ahahah I knew it. 😆👍
@armandgun3 жыл бұрын
dirty girl
@BrianR-ML3 жыл бұрын
@@armandgun 😝👍
@briansilva61603 жыл бұрын
This is the first time even hearing about ADM and I think I’m in love
@mikenettle76553 жыл бұрын
I would say they’re probably the best ar nobody really knows about.
@Planetone.3 жыл бұрын
After reviewing many AR15 in the $1800 range i chose this uic mod2 rifle is specked out really well for the money. Almost reminds me of a Radian mod1 at $500 less!!
@107gamma3 жыл бұрын
While your joking about how our pistol braces look. In my state with a CPL I can legally keep it loaded AR pistol inside a vehicle. Something I can't do with SBR's or rifles. I live near and travel through the Inner city of Detroit were I've already experienced multiple incidents of gun violence in my life time. And as you probably know. I can travel easier out of state. So looking cooler with a stock on a weapon if needed that I can't use because it's not loaded or and in the trunk would do me no good. Shorter barrel are also better for maneuverability in the narrow hallways in my house. These pros way out way a $200 tax stamp, travel and looks of a brace. I have 2 ADM builds and I enjoyed your video.
@armandgun3 жыл бұрын
Appreciate your input. Yes it's true, in some states it's more than just a 200 tax stamp. The rules and restrictions can differ, so there I would agree with you. For me, if it was just the 200, I would go sbr every time, or grab a P&W 13.7/9 like this one.
@shawnwillis75613 жыл бұрын
I have a 14 inch cz bren 2 in 7.62×39 and I welded a yhm suppressor mount to make it 16 inches. Got a yhm resonator to go with it. Just got the original military stock in the mail yesterday. I spent $155 not including shipping. A lot of people snatch up the stocks and sell them for $350 to $500 online. The rifle comes to America as a pistol because of import laws so everyone doing an sbr wants the stock so their insanely hard to get. So I'm giddy as a school girl.
@billwilliams42812 жыл бұрын
Almost two years later, do you still have the same thoughts on this rifle? Looking for a good home defense rifle for my first one. Thanks.
@medieval_flail Жыл бұрын
be surprised if he still has it as a Canadian
@jerdog3333 жыл бұрын
Quint is one of my all time favorite movie characters, and JAWS is my favorite monster movie ever! Great gun!
@mlrllama2 жыл бұрын
I've owned my Mod 2 8" AR pistol in 300 BLK a little over 3 years. Compared to my Poverty Pony (Colt) AR15A3 and Armalite AR-10 it is hands down my favorite AR platform. With an EoTech 512 and the Geisselle trigger that came with mine, I can easily get hits on a 1/2 silhouette at 100 yards with very little effort. I've gotten hits at 250 yards, though not nearly as often as I do @ 100. My favorite loads are on the extremes: -110 grain Varmageddon @ approx 2,275 FPS (supersonic) -220 grain powder coated hardcast @ 1,050 FPS (subsonic). Paired with a SilencerCo suppressor this is incredibly quiet. Overall, I'm a huge ADM fan.
@leroyfisher97683 жыл бұрын
Your gun collection is magnificent sir I envy you
@NotThisGuy122 жыл бұрын
Radian or ADM lower?? Radian was my dream gun, I just got my 14.5" PWS mk114 mod2 in. In doing research on Radian they have awful customer service but I like their ambi switch better than ADM, ADM will probably get my moneys today! Thanks for giving us all something to envy, you have every man's dream collection.
@joquin46183 жыл бұрын
If I could choose 1 gun in 2020-2021 would be the one I could find and afford to buy and afford to feed! That ADM is sweet!
@doughboi007 Жыл бұрын
you should get your hands on the Sons of Liberty GW AR to do a review. They have a 13.7" pinned and welded to 16".
@wildcat85982 жыл бұрын
I’ve fallen in love with ambi lowers as of late. I’ve got a ADM ambi lower with Geiselle flat trigger with a 10.5” BRN180 upper. Then I have a Radian ambi lower that I’m doing a 300blk build with. The ADM lower is nice and I like it a lot
@caleb40152 жыл бұрын
I have been searching the internet for weeks trying to find a rifle that checks every box, and I just found it AND its in my fav color.
@Slim7283 жыл бұрын
Can you get a surefire can to mount on this thing? Warcomp looks pretty tucked in there.
@leealan43122 жыл бұрын
My favorite AR…KAC sr15 E3 mod2 11.5 inch. But only slightly less well-known as the “Knights Armament creamy mama jama smooth butter sweetness!”
@bradisaacson46563 жыл бұрын
I'm glad to know about shortening the barrel with a longer muzzle device - great stuff!
@joey_cola3 жыл бұрын
Your MPX videos inspired me to pick one up myself last week (MPX-K). Had to pay $2100 but considering how much they're going for on gunbroker right now I would say that's a fair deal. Definitely going to SBR it not because braces bother me, but because the Sig stocks look so fucking cool. Picked up 5 additional mags from Osage County Guns for $48.99 ea. if anyone's looking for a good deal. Wednesday can't come quick enough!
@slowmo7500 Жыл бұрын
Heck yeah, my 13.7 is my very favorite rifle. 100%.
@wendigotactical98923 жыл бұрын
You are quite knowledgeable and enthusiastic about firearms. Good stuff, Canuck! You’ve earned a new sub!
@floridaman7273 жыл бұрын
Geissele Super Duty 11.5 is my choice. Would choose it over my DD, LWRC, or Noveske. Only thing that could beat it would be a KAC or LMT but good luck finding those!
@armandgun3 жыл бұрын
Good choice. My 2 go to sbr’s are a sr15 and hk mr223. Wanted to mix this up with a non sbr. The 13.9 p&w is a really nice compromise between sbr’s and full length rifles.
@gearbarrel62373 жыл бұрын
Have you noticed a huge difference in the Super Duty and DD and Noveski?? What are the specific differences? Look forward to hearing your input ;-)
@floridaman7273 жыл бұрын
@@armandgun I have a 13.7 rosco that I love! But the geissele gives me the same joy that I get when I shoot purpose built duty guns like the KACs. A buddy has one and something about it makes you feel like you have something in your hands that can handle anything.
@floridaman7273 жыл бұрын
@@gearbarrel6237 the big thing for me is the geissele is a milspec gun and a true AR15 at its core. So if something breaks I can pull parts from any AR15 and it’s good to go. Honestly I know it’s all mental. My LWRC and Noveske use proprietary parts which isn’t a bad things but makes me think about what if they are banned. The DD is great but when next to the Geissele it not longer has the same “glow”. The fact that when you buy a Geissele super duty your getting a geissele trigger and rail makes it worth it completely. My DD I even changed the trigger to a SSA. The Geissele is the FIRST AR15 I’ve not changed a part on. To me that says a lot. I love customizing all my guns even my SCAR 20s and BREN. this gun I didn’t have to do a single thing to. Sorry for the long response but I hope that explains my original comment
@motorcarclassics29223 жыл бұрын
Wheres that black multicam cumberbatch from?
@Bubnazty3 жыл бұрын
With the Surefire Warcomp recessed in the handguard like that you wouldn't be able to mount a silencer on the rifle. I ran into this with my Geissele MK16 13.5" Rail and a 14" barrel. I ended up having to use an extra Surefire shim to extend it slightly to clear the Surefire silencer locking collar. Good thing they are changing it to a 13" rail like you mentioned in the video, otherwise I'd say that's a pretty big design mistake. Great looking rifle!
@jeffhammond87833 жыл бұрын
I’m currently running into the same situation with my Noveske Infidel 13.7 barrel and 13.5 NHR hand guard. I’m currently running a pin/welded kx5 but would like to remove it and swap out for a muzzle that will accept a suppressor. Wonder if the surefire shim would work with my setup
@armandgun3 жыл бұрын
Yep you’re correct, I just got the rifle early and they didn’t have the 13’s done yet. Took what I could get. I’ll have the 13 soon and will do the install in the upgrading guns video for this one.
@Bubnazty3 жыл бұрын
@@jeffhammond8783 It might if you are super close. Mine was within about 1mm from clearing before I added the extra shim. I used the biggest one from the surefire shim kit and that gave me enough clearance to attach the suppressor. I don't really like how it looks aesthetically with the extra shim but thankfully it's pretty much obscured by the handguard so you can't really see it.
@jeffhammond87833 жыл бұрын
@@Bubnazty thanks for letting me know! I might have to try it out and see if that will work for my setup.
@aLbotTV3 жыл бұрын
I have an LMT MRP/MARS-L that I had the barrel cut down to 14”. It’s pretty sweet I think that would be my only AR if I had to choose.
@theNillaLenape2 жыл бұрын
Check out the G handle, definitely dethroned the raptor. Also, those we enhanced pins so they shouldn’t need a dimple.
@AntaresTwo62 жыл бұрын
Is there a difference between the Captain Quint 13.9 rifles ,and the "regular" Adm 13.9 rifles? Other than the grey paint job.
@henrygonzalez360Ай бұрын
No difference, other than the paint job.
@SpeedyWings2323 Жыл бұрын
5:45 you have any info on that catch? I haven’t seen any other radian lower with it except with yours
@colbygraves9298 Жыл бұрын
Is that the stock hand guard length? It looks like the hand guard goes all the way to the end of the barrel
@tech62633 жыл бұрын
Placed my order yesterday.
@tech62633 жыл бұрын
And I have had it for a month now. Super surprised it got here that fast.
@MAGAWillSaveTheWorld Жыл бұрын
Im going to get one of these and a 300blk upper soon.
@ThePatriotParadox2 жыл бұрын
Are there any handguards where you can push on the barrel and it NOT FLEX??? & WHAT are they.!.?.???
@4coopdawg Жыл бұрын
Is the wall stone or something else ? Sorry about the weird ? Thank you !! Great videos.
@raychou65043 жыл бұрын
Just ordered my UIC Mod2, let's see how long it will take before they can build and ship this baby to me.
@Planetone.3 жыл бұрын
Their website says 8-10 weeks! Which isn't to bad, could be worse now let's see if that's true🤞
@ianmcdowall36003 жыл бұрын
mine was around 7 weeks
@Planetone.3 жыл бұрын
@@ianmcdowall3600 recently? If so not bad at all.
@ianmcdowall36003 жыл бұрын
@@Planetone. and that was over xmas/new years
@josh483153 жыл бұрын
Ray Chou did you get it yet?
@Reisito3053 жыл бұрын
How much longer are Canadians allowed to keep these guns?
@malloperator3 жыл бұрын
Till May 2022
@benmckenzie43412 жыл бұрын
how has this gun been holding up? Just put in a order for one. You still like the 13.9 and size.
@bradleylabrosse50923 жыл бұрын
If there's ever an apocalypse I'm visiting this dude
@nyquil07na383 жыл бұрын
It was an adm or pof for me. I went POF both are solid rifles imo.
@NotThisGuy122 жыл бұрын
What made you choose POF?
@nyquil07na382 жыл бұрын
@@NotThisGuy12 both are great man. Personally, I really liked the bcg design, DIcator® gas block, and the trigger is very good. I am left handed and POF makes the best ambi lower in the biz imo. All the parts are date coded as well. Iraqvet8888 has a POF burn down that's very impressive (the burn down I think was a piston system). Anyway very good rifle for the $$$. Mine shoots sub moa with 77 GR SMK.
@Tyrant_Popper3 жыл бұрын
"ladies and gentlemen, mostly gentleman" 🤣
@03Memito8 ай бұрын
Can you point me to a store I can order this from? I don’t have an FFL and can’t order from their site
@atkinsatkins15310 ай бұрын
Do you really keep your elcan that far forward 🤔
@zenitzo9 ай бұрын
ok no bias, between this and the daniel defense 14.5 SLW which one are you taking ?
@markoconnor68413 жыл бұрын
You have it made my friend.. You are my hero, being canadian myself gives me hope lol
@700xc993 жыл бұрын
You Sir are the Canadian Gun God
@jayseanthony13 жыл бұрын
Can you even get a suppressor on it with the rail going over part of the muzzle device like that?
@derek31543 жыл бұрын
I’d guess not since he is getting a 13” instead of the 13.5. .7” is super close to a suppressor being unusable
@FarmerJimbob3 жыл бұрын
He posted a video today with suppressor on it
@Bryantrincon4133 жыл бұрын
damn that collection looks easy over 100k i barely got 1 handgun just got into the hobby
@codebebop3 жыл бұрын
You’re in Canada? How’s that 5rd limit?
@RobsKoiPond3 жыл бұрын
It sucks. So we use Ar mags marked for 10 rds. Regardless of any of this Liberal dicks here banned all ar15s in Canada. They banned 1500 styles of rifles and thier varrients. So thousands of types of gus are banned. All these guns are now safe queen's and not allowed to leave the owners homes. They are trying to pull the same shit they did in New Zealand. Gun buyback BS. So about 99 percent of the Canadians that own these things are locked away until out lawsuits get through the courts.
@bigpoppa2408 Жыл бұрын
Hi! Could you please tell me the handguard lengh?
@jaydenmcconnell6003 жыл бұрын
Aren’t AR-15’s ban in Canada now, or did I miss something?
@gmredstar3 жыл бұрын
He must have a business license. i believe they can still shoot them under a business license. Arm&Gun can you confirm?
@brandonrides89532 жыл бұрын
You're Canadian, how are you being affected by your new laws?
@Training_Tsuna_3 жыл бұрын
Bought a lower with your code. Looking forward to the ambi goodness, especially with there being no guarantees with radian’s coming back in stock anytime soon
@JargoHogies3 жыл бұрын
How can you shoot it? Doesn't it have to be in storage until buy back?
@armandgun3 жыл бұрын
This gun is held by a business, not me personally. It was imported to Canada in December, well after the ban.
@gsbcduer3 жыл бұрын
Is lmt still selling their proprietary rail upper? I can't seem to find it on their website.
@rickypickles22192 жыл бұрын
Just ordered a mod2 13.9! How well do you think the handguard would hold up for hard use? Going to be my go to shtf rifle
@pac-ec3gx Жыл бұрын
Can you compare adm with lwrci
@FriendM20103 жыл бұрын
Nice bunker 👍. Gonna look into ADM line of rifles. 👍
@jonathanmarsh10522 жыл бұрын
I'm late here, but is that a DSR1In the background 😍
@jg3_752 жыл бұрын
I figured you’d go with the Radian
@seanwhite3043 жыл бұрын
If I could only have 1 it would be.. LMT MLC S.O. 12.5" Pistol With MARS-L & SBA3.. I refuse to pay that 200 bucks because I live on the border of 3 states . So pointless to have SBR. I've had Criterion 13.9 Hybrid Chrome Lined with PINNED SF WARCOMP for years . I'm currently in process of building 13.9 6mm ARC.
@warrenjoseph2605 Жыл бұрын
Which green is this? It kinda looks like odg but not sure.
@henrygonzalez360Ай бұрын
Bullshark Grey Cerakote
@oso11653 жыл бұрын
You planning on trying the wwsd 2020?
@garrettreid92292 жыл бұрын
what would you suggest for a good rail for a 12.5 barrel. building a mega arms billet receiver set with a 12.5 criterion barrel, no budget on this one. but having a real issue finding a good light weight rail that looks good and is functional, i do plan running suppressed from time to time
@henrygonzalez360Ай бұрын
Geissele Rail 👍🏽
@jg3_752 жыл бұрын
I know the laws in terms of AR’s in the US very well… what are the laws in Canada ???
@1776-d7u3 жыл бұрын
What’s the rail length?👏 rifle?
@sleepyoreoszzz5681 Жыл бұрын
What buffer and spring are you running?
@CCOOKE883 жыл бұрын
How do you have all these firearms in canada?
@armandgun3 жыл бұрын
I don't. A business does.
@chattanoogatayx02402 жыл бұрын
did you lose any ARs from the ban up there?
@ohios273 жыл бұрын
Is the handguard 13.5"?
@noeyeddeer75263 жыл бұрын
Nice video batman!
@KaneGregory2 жыл бұрын
Have you picked up the Radian before it was insane how heavy it was the guy told me it’s for when it gets hot it want loose accuracy I gotten my ADM glowing and it still shot great it’s the one I’m walking out the door it shot better than my BCM high praise from me!🤯🔫
@xDeVeYx3 жыл бұрын
Where’d you get the money to pay for all of those guns?
@forzahellrizing62743 жыл бұрын
When are you going to do a video with that DSR sniper rifle
@GGGGGGG.3 жыл бұрын
He did it already lol…
@Equalme10 ай бұрын
What color is that cerakote?
@henrygonzalez3607 ай бұрын
Bullshark Grey Cerakote
@twinadventures27143 жыл бұрын
@Arm&Gun love the videos, but I got to ask a favor... I live in California and it would be my dream to see an AR10 build, 10.5 inch barrel w/ suppressor. If you have built one close to it, forgive me I’m new to the channel. Got a lot of videos to catch up on. If you don’t want to do it, no worries thought it wouldn’t hurt to ask. Lastly keep up the great videos, I hope one day I have what you have.
@DirtyDawg-xy5cp2 жыл бұрын
Bro, you can build an AR10 in California… Just can’t add the suppressor.
@dylanthompson57502 жыл бұрын
Didn’t they just bag guns in Canada ?
@dylanthompson57508 ай бұрын
He’s Trudeau’s cousin so he’s exempt from those laws
@muffinman31113 жыл бұрын
How did you find the m78?
@AlmostFamousShow Жыл бұрын
What’s the color, I love it
@thewhitematstudio Жыл бұрын
Bill shark grey
@granttubridy97674 ай бұрын
Should I get this or a urgi
@henrygonzalez360Ай бұрын
The urgi upper is better but the ADM Lower Receiver is all out the best lower on the market. If anything, get a urgi upper with a ADM lower. Best of both worlds.🎯
@JohnDoe-mh5pr2 жыл бұрын
NIce looking AR, but no pinned gas block is a deal breaker for me. its just not a duty grade rifle without that. Aside from the criterion barrel and ambi controls, not sure what it really offers over the competition such as Geissele SD.
@henrygonzalez360Ай бұрын
Get a Geissele Upper with a ADM Lower.
@deonparis38783 жыл бұрын
Aren’t these rifle prohibited in canada?
@josh483153 жыл бұрын
I don’t understand why they don’t just put more M-LOK slots at he 1:30/10:30. Why put in a lightning cut when you could just do functional M-LOK slots and get the same result of cutting weight anyway
@armandgun3 жыл бұрын
Mlok is actually decently thicker and heavier than they get with a lightening cut. Q-Sert is looking to be even stronger and lighter than mlok.
@josh483153 жыл бұрын
@@armandgun how are the lightning slots thinner than the m-lok slots? It’s the same rail so I don’t get how they can be thinner. I don’t understand how that would work. Does the rail actually get thinner and thicker between lighting slot and m-lok slot?
@jp718892 жыл бұрын
slick Castle nut
@GorbleGable Жыл бұрын
Why do you hate velocity 🥺
@mattsterpiecenjmaflva99563 жыл бұрын
Did you go with a 13.5” handguard instead of a 13”?
@armandgun3 жыл бұрын
Yes, but only because that's all that was available back in November. I have a 13" on its way now.
@SuperGiantGeckosLLC3 жыл бұрын
14.5 here & 300blk in 16”
@lessforloans2 жыл бұрын
only think im questioning is what color.... like em all
@WITH-THE-BUSINESS.2 жыл бұрын
YOU ARE GREAT 👍
@scottborst54303 жыл бұрын
That’s very cool nice gun do you have a very big and nice collection of guns there and as for my favorite which I don’t know if you mess with them before but I build me a Pistol AR with a 12 1/2 inch ballistic advantage barrel in 6.5 Grendel with a Ruger lower and a arrow precision upper With the SB tactical collapsible arm brace I built this back in 2017 this is my one gun if I ever have to have a gun it can go up to 800 yards if I need it
@tysonhenderson51743 жыл бұрын
Great vid
@bigz52623 жыл бұрын
I might have missed it but what optic is that?
@aidanaston41063 жыл бұрын
Elcan. they cost like $2000
@bigz52623 жыл бұрын
@@aidanaston4106 wow! I’ll keep looking. Thanks
@johngotti3323 жыл бұрын
How the hell you have these in canada
@hamishmmc3 жыл бұрын
How are you doing all these drills with banned guns? I really don't get it. And how come you're acquiring more of them seemingly when they are banned?
@armandgun3 жыл бұрын
Dry fire drills largely. I cannot acquire them personally, but the business I am working through can.
@rshinn87762 жыл бұрын
I was gonna crap on ADM for using a 13.5 rail until you said they're actually shipping with 13" rails.
@swapnilmohanty40453 жыл бұрын
Your videos are so detailed and informative yet it's sad to see you have very less subscriptions. Hope that will change soon.
@tomszrodak3 жыл бұрын
Can I please be your neighbor and best friend as well? Haha! Greetings from TX