If You Build It - Barn Timelapse

[@StudioSamSmith]

First 45 seconds is the best bit of editing I’ve seen in god knows how long

[@RodRussell-b7n]

First off.. beautiful craftsmanship. Everything about this build is amazing other than the plumbing, specifically regardong the water distribution system being under slab. As a plumber, routing water lines under concrete, equals money. You going to have settling that occurs. If anyone lives were seismic actions are frequent and or freezing.. dont do this. Again this equals money, not today, not tomorrow but tomorrow is never promised in my book. Again, beautiful craftsmanship, having built many cabin on my property, perfection is key. Keep building and keep the dream alive. S/F

[@barnbuiltbearhawk7267]

Thanks for the tip. BTW, I still have not hooked those pipes up to anything.

[@bobvaughan3082]

That was so entertaining a job well done.Glad you had some background music love it.

[@Z-Bart]

It takes a lot of gumption, determination, and grit to keep working once the sun goes down. My hat is off to you. Job well done. PS I have a Woodland Mills also. 👍

[@coreyortego2663]

I would like to applaud you for this massive achievement. It is on such a grand scale the likes of which I could only dream of for myself. I absolutely love the fact that you have shared it with us. You should be so very proud of the fact that your hard work has rewarded you with this beautiful structure. I hope you enjoy it for the rest of your days. God Bless you and yours.

[@barnbuiltbearhawk7267]

Thank you so much for the kind words

[@g04tm4n]

this is a dope build and dont care what anyone says, music is energy and this build was just that.

[@TheRaulr151]

freaking amazing!! Gorgeous barn! Congrats on a beautiful build!!

[@vaughnmccoy651]

Your energy, team work, can do attitude and skill are most appreciated. It brought back memories when my friends, wife and I built a barn. You gave me some good ideas if I ever build another barn. Thank you for sharing this with us.

[@dannydonnelly8345]

This was an awesome build! Doing a similar but smaller build, milling etc. I can't believe people are bitching about the music😂. I loved it.❤ It doesn't even make any sense. The best part about the music is it's all free! and you can adjust it all the way from mute to full volume. Life is great! keep up the good work!!

[@barnbuiltbearhawk7267]

@@dannydonnelly8345 My thoughts too! Thanks

[@CoreyCarter-q8w]

I have watched this over 20x. you made it look so easy. I have to take more classes. hopefully one day in the near future I will attain your skillset. thanks for sharing the process. this is motivation

[@nathanbowersox1234]

The most I ever learned was cutting my own frame for my house and teaching myself electrical plumbing and hvac. 5500’ of trench, taught myself how to do septic systems and have two. Something about having to sink or swim teaches you a lot. But my rich neighbors in an HOA connected to my 20 acres hate me for my out buildings. And I’m always building.

[@ColbyOsborn]

What an awesome project! Appreciate you taking the time to document it and share it with us. Look forward to seeing your BH.

[@barnbuiltbearhawk7267]

Thanks Colby!

[@Mike-or2cv]

WOW! SO COOL.

[@TrustinTimber]

NIce work. Looks awesome.

[@rodpotts2666]

You have alot of friends. thtas great.

[@inthewoods5640]

Just wow , great job!

[@gmcquire]

Great story in this...patience and perseverance pay off...and as far as the music? I kinda like it!

[@rexus1941]

Swedish house Mafia great song , great video, great job 🇧🇷

[@pacodefrancis7235]

Wow. That is incredibly impressive build and absolutely beautiful. You’ll have a wonderful story and building to pass on to your grandchildren

[@MIRUSTICS]

pretty dope barn build, even with milling your own lumber it still doesn't look like it was cheap in any way. love the monitor style barn though and i'm sure you guys are stoked to have it!

[@barnbuiltbearhawk7267]

We sure are!

[@jerrystout3032]

Great Job guys!!Amazing

[@thomassawyer5565]

You must be in Maine, I recognize the Hammond Lumber house wrap. Beautiful job.

[@backhoebucket]

Great Job! Hard work & dedication.

[@floridian7143]

Nice job, from a retired Timber Framer!

[@tutekohe1361]

Great work ethic. Nice result. Gorgeous Barn.

[@990jimmer]

Great vid and superb dedication and work

[@justmakeit2616]

Awesome looks like a barn and a Church. But its still a house

[@BlindRanger.]

Magnificent, spectacular, glorious, majestic, awe-inspiring, breathtaking... Words don't do justice. I'll be moving on to around 100 acres of timberland in a few months, but I'm probably a decade away from a structure like that. Are congratulations in order? Absolutely amazing .

[@barnbuiltbearhawk7267]

Thank you!!

[@christophweeks7428]

Wow! Dreams do come true! Very nice work

[@MannistoCay]

Lots of work! Going through the same process here at the Cay. Cheers!

[@iGame360fficial]

Now that is a song I have not heard in many years.

[@tribeverage7268]

OUTSTANDING!!! Nicely done y'all!!!!

[@iaroadkill2354]

Beautiful build! I have to cut down 15-20 mature hickory for a house build on my new property and would like to use to build something like this after the house is done.

[@DawsonWestervelt]

This is a buetifull barn. Great craftsmanship and carpentry. How big is this barn about 28x30? I would love to build a barn about this big. Great work!

[@barnbuiltbearhawk7267]

@@DawsonWestervelt thanks! It is 30x32

[@nikfish1]

How monumental!

[@royramey5659]

Beautiful

[@propylaeen]

extremely well cutted trees and video!

[@SalemWoodworks]

Came back to watch the video again, start to finish. I've built two timber frame buildings. Mine were tiny, by comparison, so I can appreciate what a monumental effort this was. Did you actually build that without buying a chain mortiser? That's pure heroism. The music timing with the doors at the finale had me applauding the entire project, editing included.

[@barnbuiltbearhawk7267]

I did build the whole thing without a chain mortiser. I got sticker shock when I checked them out.

[@SalemWoodworks]

@@barnbuiltbearhawk7267 they are shockingly expensive... apparently I was lazier than I was poor.

[@ricknelson3607]

Very Nice video and project.

[@Owl566]

Awesome project. Well made. I do have to wonder though, is the techno trance rave barn building scene really all that big? I can’t imagine people who enjoy one enjoy the other…

[@jamesmatheson5115]

Beautiful barn, love the timbers used, however, one thing I wouldnt have done is the vertical planks on the outside walls, to much moisture can get under them and cause rot, doing the Japanese Yakisugi timber burning technique would be good for the outside in the weather timbers. JMO

[@barnbuiltbearhawk7267]

Agreed. Burned some at the beginning. Took too long. Will likely regret it when I have to replace them.

[@rileysmith8980]

Nice build. Looking forward to the Bearhawk build. I’m leaning towards the Zenith Super Duty but the Bearhawk is on the short list.

[@WillBostrom-so2de]

What a wonderful job! Im looking to build a home just like this. Is it possible you have plans you can share?

[@barnbuiltbearhawk7267]

I did the design and model on the computer and never made plans from it.

[@sirnewton6874]

OK I will subscribe. If can build a barn. You have no trouble with a BH. Best Regards Cool seat pans !

[@joemanflyer2001]

Great iron stairs ! Would love to know the dimensions and materials! I see you custom welded it but would like more details! Thx.

[@SalemWoodworks]

Paused to subscribe just because this channel deserves to make it to monetization. Nice video... and nice barn!

[@overbuiltautomotive1299]

i would like to build this very barn sweet stuff do you have cut sheet plans or am i on my own got the cheap sawmill just got to geterdone God bless . any extra detail would be nice like size and just what ever ;]

[@barnbuiltbearhawk7267]

@@overbuiltautomotive1299 give me your email. I'll send you what I got.

[@flyknotrancher4158]

Amazing perseverance- Bravo Zulu

[@anthonyrossignol5155]

Amazing...

[@jimwobb7635]

Very nice!

[@OldMotorcycleAdventures]

I have a question for you. I have never done any construction, but my wife and I have 35 or so acres in Maine, 30 of it is wooded. We have been considering putting up timber frame structures since the wood is free and just sitting there ready to be used. I know the timber frame goes up green, but did you also put up the siding and interior planking green, or was that dried for a bit? I have no idea how much shrinkage is to be expected. Any timber framing books you've read and recommend? There's certain aspects I can't find covered on KZbin. Thanks, and awesome job!

[@barnbuiltbearhawk7267]

@@OldMotorcycleAdventures i got all my lumber from 15 acres of land. 90 or so pines. They say a year of dry time per inch....I decided not to wait. The structural wood dried for a year. And I didn't want the doors to warp so that wood was dried. The rest was live trees fell one day milled and installed the next. If your installing windows or doing any drywall you may want to follow drying times otherwise just put it up green.

[@OldMotorcycleAdventures]

@barnbuiltbearhawk7267 awesome, thank you!

[@TG-to3dv]

Lots of work Your wives are cooler than mine Looks like you had more help in the beginning?! 😊😊

[@YoungbloodFamilyFarm]

Great build and Great Editing! I have a monitor style pole barn, my lean to’s are also rafters, did I see that you just used fiberglass rolls to insulate? What kind of airspace did this allow. I have probably thought to much about this

[@barnbuiltbearhawk7267]

I used batt insulation in the roof. I've got at least 2" clearance for the roof to breath. Thank you for the compliment!

[@Wooddust6]

this is a dream for me. I want to build a shop much like this once I buy my next property. Just don't want to wait the long haul to finish it as i don't have all the friends and family to finish it. It would literally be a 1 man build and i work slow as molasses. What was the shop size. Bout 30x30? I'm guessing? I wanna go pretty big probably 36x50 min (prob 40x60) on my next shop. as i have been doing a lot of fab work. so i need room to setup all my wood working machines and CNC and then setup a small metal shop w/ a plasma table. Think I'd put office & a spray room in 2nd floor loft area. 8-)

[@barnbuiltbearhawk7267]

Its 32×32. I wouldn't go smaller and literally used every single peice of every pine on my property so couldn't have gone bigger either.

[@Wooddust6]

@@barnbuiltbearhawk7267 bout how many trees do you reckon you used?

[@barnbuiltbearhawk7267]

About 80-90 trees. That includes structure, floor boards, wall/ceiling shiplap and board & batten siding. I used every inch of tree that I could.

[@mattjohnson9743]

I agree this music is very distracting. Try just the sounds of environment ,barn looks good

[@dakel7]

very impressive!

[@CascadePacificNW]

awesome! are you a builder by trade? interesting technique that's for sure. where is this?

[@barnbuiltbearhawk7267]

It's in Maine. I'm no builder...

[@gbs7144]

What size and how tall are those 1st posts (all main posts) you stood up?

[@barnbuiltbearhawk7267]

Those are 8'×8' x 16'-3" long. 16'-3" was the max my mill could do.

[@nuriklc9056]

Appreciate you...

[@TheSeriesofTubes]

Why did you set the header on the flanking lean-to’s so low? I want to build something similar but 8’ ceiling on the flankers and 10-12’ on the center, am I not taking something into account?

[@barnbuiltbearhawk7267]

It suits me just fine. My liftedtruck fits under them so its good for me. I suppose I could have gone higher but no need. Center is 12. Fits my tractor with backhoe in stowed position. If you don't like the lean-to low ceilings then maybe pick a different design.

[@nathanbowersox1234]

My engineer made me do massive footings under each of my posts for my barn build and a 21” thickened edge slab up to 6” thickness in the center.

[@barnbuiltbearhawk7267]

@@nathanbowersox1234 I too over engineered the slab. But only because of the heaving we get in the winter.

[@xayahumongous9139]

After being around so much new construction, i want nothing to do with 2x4s in my walls. I crave timbers and beams

[@bobcat9314]

Impressive have to build a family, before you can build a project like that... Yep try and replicate this video..hahaha..be my guest.. Hahaha... a beautifully accomplished project..is completely worthless unless you have some one to share it with.. Those are my thoughts. Oh..and sir.much respect for the path your walking..

[@mattamiller]

Excellent work, which state is this located?

[@Grizzlife]

Nice build. What is the length of the corner posts? Thanks for sharing!

[@barnbuiltbearhawk7267]

The large 8x8 posts for the main roof are 16 feet tall. The small 6x6 awning roof posts are 7 ft tall

[@ThomasShue]

Would you share the plans to me? I have a woodlands mill and want to build this same barn?

[@psgflier]

Pretty nice shack. Did you get all the lumber from your property? What size are the posts? Did you make the brackets for the posts? Only problem is you won't be able to get the plane out with the wings attached!

[@barnbuiltbearhawk7267]

So true! I actually designed the barn around building a Glasair Sportsman 2+2. The wings can fold in and out in the barn with some manipulation. Though the price of those went through the roof. Ultimately the Bearhawk is a much better airplane for half the price! All lumber came from my lot and posts are 8x8 16 feet long and 6x6 for the awning roofs.

[@psgflier]

@@barnbuiltbearhawk7267 A fellow here built a Glastar, I gave him a little flight instruction in it, not too impressed. He sold it to a local fisherman who put a different prop on and performs much better now. He then went and bought a Sportsman 2+2. If I were going to build a personal use airplane it would be a BearHawk. I have a bunch of 10 X 10 16' and some 6 X 12 20" to build a warehouse, but it's just going to be post and beam not timber frame. Getting too old to manhandle those timbers anymore.

[@mxmanchris317]

Anyway you could share your plans? My wife and I want to build this for our Homestead.

[@robintaylor-mockingeemill8223]

That tractor paid for itself

[@barnbuiltbearhawk7267]

And then some!!!! 1968 Ford, just keeps working.

[@jakewatrous378]

Did you mill these trees green or let them dry for a while first?

[@barnbuiltbearhawk7267]

Some sat for a year. Others went from live tree to installed timber in a day

[@mstream39]

Making the spiral staircase is as impressive as the barn itself! Did you design them yourself as well?

[@barnbuiltbearhawk7267]

I did. It was a lot of fun. And way cheaper than buying pre made. The hand rail is plastic well line from HD screwed in. It worked out great

[@ericodell9069]

Where did you get the plans for this timber frame? I would like to build this on my land in the Ozarks.

[@barnbuiltbearhawk7267]

I designed it myself. If you would like to purchase the plans let me know and I could put a set together for you. It would be for the structural framework only. Joinery,etc.

[@dlsiefer]

Wow , i would like to get a set of plans also. That would make a great hunting cabin. Thanks Dan

[@dennissmyth2091]

What's the boom pole setup on the front of the tractor to help with the frame raising?

[@barnbuiltbearhawk7267]

I designed that in solidworks to hold the capacity I needed for the barn build at 1.5 safety factor. It's a 1/4" x 2" x 4" tube welded to a skid steer quick attach plate. The far padeye can support 300 lbs. The mid one can hold 1000lbs

[@gregrupar135]

Did you mill all Your lumber and if so how long did you wait for the stuff to dry before you started using it

[@barnbuiltbearhawk7267]

I did mill it all. Some of my wood was alive on a Monday, cut down on Tuesday, Milled on Wednesday and installed on Thursday. So, same week. All the structural wood sat for about a year. I have had no problems so far working with the wet wood.

[@DowneastThunderCreations]

👍👍👍

[@danmanley2525]

I see you used most or all of your own wood. What was the final cost? If you look to purchase a kit or have one built it's 200k without the foundation.

[@barnbuiltbearhawk7267]

Take off a zero. That was my final cost with the foundation included. A lot of work to mill your own wood and make my own stairs, hinges, brackets etc. But so worth it! All my trees were free.

[@danmanley2525]

@@barnbuiltbearhawk7267 I love it

[@jonsmith9708]

Nice barn but the wrong music for such a video, I’m thinking slow folk music

[@icecreamtruckog3667]

There is a flaw in your design, a floor beam should always sit on top of a support beam for maximum strength. When you cut into a support beam and put the floor beam into the hole you weaken both.

[@barnbuiltbearhawk7267]

The load calcs on the beams were completed using smaller dimensions. E.g. beam is 8x12 with one inch notches on either side. Load calcs were for a 6x12 beam. All is good! Thanks for the comment and good catch!

[@YarTraktor]

Красота 👍

[@adadventuresontimbermounta6764]

doing almost the same with a&d adventures with timber mountain

[@barnbuiltbearhawk7267]

I checked out your work. Super impressive!!

[@adadventuresontimbermounta6764]

@@barnbuiltbearhawk7267 Thank you

[@michaelsilberstein]

Where can I get the plans?

[@barnbuiltbearhawk7267]

I did the designs myself. I never made plans hust worked off a model in solidworks.

[@mikeyoung5211]

If you build it, HE will come

[@CleverGirlAAH]

This is going to be one of those barns that lasts 300 years.

[@barnbuiltbearhawk7267]

Heck yeah it is!!!

[@chadheidzig]

Dude your music is distracting. I can't watch.

[@dalekordes5406]

Turn it off … same as NFL ‘analysts’

[@dfoltz268]

Have to agree however, I did turn the sound off and watch but it is far less immersive and enjoyable. With that being said.. Beautiful work by all! love the barn and the way it was put together!

[@edcat6587]

Yeah,I had to turn the volume completely off.annoying as $#@%

[@AC-hv2lk]

Turn it down

[@EyeWokeVisuals]

Dude your comment is so unnecessary, I can’t not reply. what’s next, you don’t like the time-lapse style either 😂

[@fricknjeep]

hi there nice john

[@СтаниславБарахтин]

Can you give a project?

[@majcorbin]

new subscriber KILROY corbin WAS HERE IOWA DAD JOKE of the day [Q] when does a JOKE, become a DAD JOKE? [A] when it becomes, APPARENT

[@goldfalconoutdoors4325]

Kill the music takes away from the magnificent building

[@brooksmd1948]

Most obnoxious background noise. Turned sound off.

[@gatoathens1857]

👌👍👏👏👏👏👏👏❤

[@jonathanjessop6758]

Great build looks great. Your choice of music is horrible. I would love to finish watching this video, but I can’t handle this music.

[@Namemotorcycleturbo]

What species of trees did you use?

[@barnbuiltbearhawk7267]

All new England pine. Some spruce was used for the braces.

[@thrasheraustin9797]

Oh man if that tree doesn't hit he has such good accu.......... Nvm

[@johndemeen5575]

It’s better muted.

[@CascadePacificNW]

your tractor has a hydraulic leak

[@barnbuiltbearhawk7267]

It has a lot more than just one!

[@TJBennefield]

My ears are bleeding

[@carlmclelland7624]

Might have been an interesting video, but I couldn't tolerate your background noise.

[@gillie-monger3394]

Bloody annoying 'music'. Couldn't watch it after 2 minutes of it. Sorry. Good luck though, the finished barn looks cool judging by the thumbnail.

[@gerardfenn3988]

TURNED YOU OFF!!! The Music Wasted Your Video. It Might Have Been Such A Nice Accomplishment But I Couldn't"t Think Above The Awful Sound.

[@lloydgraves]

Nice content, but really annoying music.

[@kalisvarkrom9937]

To much noise.