Hey everyone! It's always a bummer when you can't pass smog. Let me know how your SMOG Check went after the cleaning. Feel free to leave a tip 😊💲VENMO: @GarageDynamics
@leroysmith85147 ай бұрын
What P0 code did you have?
@joshforrest6363Ай бұрын
Thank youuu my wife has beeen crying this damn egr going on and off. So i said im going to just replace every hose for her. And clean the valve. Awesome video ❤🎉
@bnstalls89492 жыл бұрын
I just took time to read all the comments I can't say I've ever seen such a positive response. Thank you again!!
@GarageDynamics2 жыл бұрын
You're welcome B Nstalls! Oh, for sure! Everyone here are very kind and generous ❤😊 Thanks again for your support!
@michaelbisk931112 күн бұрын
Excellent video.Replace the EGR valve. It is full of carbon and the aftermarkets work fine.
@jasonkarriker3134 Жыл бұрын
Excellent video! Seeing how the worm shaped pipe is removed from the intake manifold both with and without the EGR attached is **SUPER** helpful.
@vicv95037 ай бұрын
Thank you so much! Proud owner of a ML320 with a clean EGR tube. with your help i finally did it on my second attempt.
@longhuynh52498 ай бұрын
Very good quality video and instructions - loved it
@L35inColorado Жыл бұрын
Thanks for posting this video - and thanks for the tip with the zip tie and the drill for cleaning the EGR pipe!
@franciscofranco72034 ай бұрын
Great and very useful video 💪 Thank you for the walk through
@GarageDriven5 ай бұрын
Thanks for a very detailed video…very helpful and I was able to swap my EGR valve and pipe 🤙🏽
@bnstalls89492 жыл бұрын
As always your videos are very helpful! One main difference between your videos and others is your explanations. It makes a DIFFERENCE! Keep up the AWESOME work! I especially like how you are in no rush! Watching a calm instructional video puts me at ease. Appreciate You Much! I followed your valve cover gasket video and it came out perfect! Thanks again!
@GarageDynamics2 жыл бұрын
Thank you very much for your kind words B Nstalls! It means a lot to me 🙏 It's always a pleasure to serve you and the community. I'll definitely keep up the awesome work! 😁 That's great! I'm so glad to hear the good news about your valve cover gasket!! 🙌 We gotta keep the S rolling strong 💪
@bnstalls89492 жыл бұрын
I actually have a E Class but yes gotta keep them rollin. I had a question I hope that you can answer for me. So you know how the engines look very similar from class to class. Ok so you know where you remove the EGR tube from manifold well just to the drivers side of is a uh Ill call it a black nipple. On mine I can grab the black nipple and pull it part ways out and then push it back into manifold. And Im not sure if it was on your car or someone elses but they had a hose coming out of it. Do you think mine is supposed to have hose in the center of black nipple also? What is the name of that part and what does it do? Thank you for your time.
@GarageDynamics2 жыл бұрын
@@bnstalls8949 Hummm, do you know if there is a hole in the black nipple? If so, then I would think there is a hose that is suppose to connect to it. It's hard to give a diagnosis without some sort of picture or diagram. Does your nipple look like this? www.benzworld.org/threads/vacuum-nipple.3014860/#lg=thread-3014860&slide=1 www.benzworld.org/threads/vacuum-nipple.3014860/#lg=thread-3014860&slide=0 If so, then It looks like you need a hose on the nipple.
@bnstalls89492 жыл бұрын
I was told my car does not have one and that it is for brake. Let me try to figure out how to post image
@GarageDynamics2 жыл бұрын
@@bnstalls8949 Ok sounds good
@kevinkelker43712 жыл бұрын
Another well.done video. Creative use of a zip tie! Would like to have seen how much gunk came off using it. Great job.
@GarageDynamics2 жыл бұрын
Thank you Kevin Kelker! It's much more flexible than a wire brush and just as effective. Wasn't too much gunk. I think the biggest issue with the EGR on the M113 engine is the heat exposure to the rubber hoses. Mine were so bad that they just started to crumble when I touched them.
@ahmadkamali85472 жыл бұрын
Exlent knowledge Personally i ike a professional demonstration , it is a real honest job, Thanks body , you'll have a good future.. i hope UTUBE should be knowing about the capabilities
@GarageDynamics2 жыл бұрын
Thank you very much for the kind words Ahmad Kamali 🙏
@corbana47436 ай бұрын
Great tutorial well explained. Thanks for sharing
@kevkline1 Жыл бұрын
Great video! Saved a ton of guesswork. Thank you.
@Omardottcom9 ай бұрын
What a great, clear, high quality video! 😮 Do you have more Mercedes Videos?
@emmanuelajoseph9772 жыл бұрын
Hey thanks for a great video. what’s the ranch adapted you use to remove the long pipe can you the links that tools
@GarageDynamics2 жыл бұрын
Thank you Emmanuela Joseph! I believe you are talking about this tool, yes? Here is the link: 24mm Crow Foot: amzn.to/3sViKoM
@roxyroxy48162 жыл бұрын
Great video, will do the same on my CL500 just to have new hoses and gaskets.
@GarageDynamics2 жыл бұрын
Hello roxy roxy, That's awesome! I just added the hose link to video description. It's a 5/32 or 4mm inside diameter hose. Happy wrenching!
@unrealriot Жыл бұрын
13:22 My w211 has a transmission filler in the way, so it make it difficult to torque the pipe..
@haramaschabrasir86627 ай бұрын
Same here, I hate it. I couldn't figure out how to remove that stupid dipstick pipe.
@awaomaka14304 ай бұрын
Great tutorial
@JohnsJohnson-ns5xm6 ай бұрын
Do you know where the idle air control valve is for a M113k engine is? Great video on the EGR.
@patrickhopping29282 жыл бұрын
This video helped me save lots of money at a garage. Thanks so much. I did have some difficulties getting to that EGR bolt underneath the fuel rail. I cussed a bit and then found a good tool to help.
@GarageDynamics2 жыл бұрын
Hello Patrick Hopping! That's awesome! I'm so glad to hear the good news! 🙌 Lol! Yeah, that bolt is tricky. Glad you got it though.
@bigqwertycat Жыл бұрын
What tool did you use
@patrickhopping2928 Жыл бұрын
@@bigqwertycat Craftsman Ratcheting Flex Head, part number CMMT87010
@shafi10a Жыл бұрын
Would u suggest doing this before or after valve cover gaskets?
@bnstalls89492 жыл бұрын
I did have one more question. On the EGR Valve the hose that has a plastic piece on it does it connect to anything? And all I could find was hose for windshield wiper fluid do you think this will work?
@bnstalls89492 жыл бұрын
I meant windshield wiper hose to replace EGR hose and not to connect to part I asked about.
@GarageDynamics2 жыл бұрын
Hello B Nstalls, in regards to that plastic piece. I think it just hangs next to the EGR valve. I wouldn't hook up the windshield wiper fluid hose to your EGR valve. That may cause a malfunction of the EGR valve.
@mikeh.75102 жыл бұрын
I been having secondary air check engine light on. Air Pump is good but somehow keeps blowing fuse for airpump. Causing motor to idle rough. I Clean front valves near air pump, I’m assuming could it be this Recirculation egr valve? But I have no check engine light for this egr valve 🤔 any ideas?
@mascho22 Жыл бұрын
My 05 e320 has a shaky idle sometimes but otherwise runs fine. I thinking it may be vacuum or air leak but could a dirty EGR valve cause this also!?
@dparham7 ай бұрын
Im getting EGR "A" code ( Forgot the number) I get occasionally rough idle at start up in morning but once warmed up it goes away.. mine is an M112 so Im assuming very similar . Ill try soon !
@blessedone13042 жыл бұрын
Wonderful video. Thank you. Question for you. If the end of EGR port that goes into the intake manifold is clogged, do I need to pull apart the intake manifold and clean whatever the pipe leads to/from inside the manifold?
@GarageDynamics2 жыл бұрын
Hello Blessed One1, That isn't necessary because once you unbolt the two screws from the intake manifold the whole pipe comes out. I hope this helps. Cheers!
@simple8818 Жыл бұрын
When i went to detach the breather hose the plastic end of the three valve broke. Having problem finding it in the Mercedes diagram. Would you know what the breather three way valve is called? Thanks.
@GarageDynamics Жыл бұрын
Hello simple8818, sorry to hear that. I believe if you go to www.mercedespartscenter.com/ You can find it. I hope this helps. Cheers!
@JayScott-p7z4 ай бұрын
Hey, did u ever find it? Mine broke too
@dancreavin16692 жыл бұрын
Great video but I’m struggling to pull the hose from the side of the elbow below MAF, it won’t budge !! Any tips I’m a humble plumber not a car man
@jmlp1368 Жыл бұрын
Bien chingonnnn....(top notch)
@GarageDynamics Жыл бұрын
Thank you very much JM LP! 😊
@josequinterosescobar43738 ай бұрын
If I throw that egr in a sonic cleaner will it damage my egr?
@leonardopacheco59542 жыл бұрын
Where does that clip attach to from the egr I changed all hoses and noticed that part wasn’t connected to anything please help
@GarageDynamics2 жыл бұрын
Hello Leonardo Pacheco, Are you talking about the round black thing that connects to the EGR? That sits off to the side. It doesn't really attach to anything.
@ericsamson27622 жыл бұрын
What was the size for the vacuum hoses that need replacing?
@GarageDynamics2 жыл бұрын
Hello Eric Samson, The size is 5/32" or 4mm, inside diameter. I hope this helps.
@seriknoserikn8109 Жыл бұрын
Awesome video
@rafaelportuguez48782 жыл бұрын
Diligent tutorial.Thank you.
@terrencetaylor81962 жыл бұрын
Great! Great!! Great!!! video.
@megeorge41282 жыл бұрын
Thanks for the video. Can I just use a steam gun to blow and clean from the pipe of EGR, without disconnect anything? Thanks
@Pablo.Coppola2 жыл бұрын
Great, informative video!
@MishaelSandoval Жыл бұрын
Thanks, great video im getting a code for egr.
@eturk1 Жыл бұрын
Thanks bro very good
@leroysmith85148 ай бұрын
What P0 code were you getting?
@2texboy7 ай бұрын
My C43 check engine light came on a few days ago. The code was P0400 for EGR. I parked it until I have enough time to remove the EGR for cleaning and hose replacement.
@leroysmith85147 ай бұрын
I'm getting a P0410 code
@2texboy7 ай бұрын
@@leroysmith8514 I looked up P0410 and it references the air injection pump. Here's a link to a KZbin video that may give some direction to go. My car also had a prior issue with the air pump and it was a simple repair with tube replacement. kzbin.info/www/bejne/aXikh6uCrpqnq5I
@ahmedhshallal9145 Жыл бұрын
Thank you a lot i tried ur method and it turned off check engine light
@mousaabdulateef92056 ай бұрын
فيديو رائع ومفيد
@haramaschabrasir86627 ай бұрын
On my E500 the stupid transmission oil dipstick tube is in the way. I have no clue how to remove it. Does anybody know?
@vya98522 жыл бұрын
Engine was shaking before ?
@GarageDynamics2 жыл бұрын
Hello V, A little, not too heavy. The check engine light is off now thankfully.
@exceptionallife4768 Жыл бұрын
You never showed the other method of removal with the frozen pipe to the Egr valve
@chriscolvin98152 жыл бұрын
Misinformed here how did you take the metal bracket off and how on earth were you able to get the fuel line clips off with just your fingers had to use pliers to get the thing off
@simple8818 Жыл бұрын
I used two flat heads screw drivers to hold the clips in their groves.
@tannertaft1538 Жыл бұрын
What’s the size of the biggest nut🥲 I don’t want to buy a bunch of crow feet I just need 1
@GarageDynamics Жыл бұрын
Hello Tanner taft, haha I totally understand. The size of the biggest crow foot is 24mm