iFlight CineLR7 7 inch FPV Cinema Quad Review

[@AlbertKimTV]

🛒 SH CineLR 7 O4 - rb.gy/0newdy 🔋 3300mah 6S - rb.gy/q5jl36 🔋 8000mah 6S - rb.gy/iy8614

[@vanlifefpv6340]

iFlight makes the best 7-inch FPV drones on the market. No doubt about this one.

[@JoshFPV24]

Looks like the perfect long range bird with O4 in it.

[@frankcastillo8869]

That was some excellent smooth flying. Sure beats the crazy wild FPV flights I see posted elsewhere that just makes me nauseous.

[@AlbertKimTV]

Honestly that style of flying gets boring after seeing it once.

[@jlarson42]

Great review video. Nice location to fly larger drones. Smoooth flight footage. 😎

[@flyingfrogfpv]

Great Video. Looks like a nice bird. Just hope it isn't to expensive 😍👍

[@arthurgiourdjian9071]

Damn, video quality looks incredible!

[@AlbertKimTV]

No need for a GoPro anymore.

[@arthurgiourdjian9071]

@AlbertKimTV can't imagine what we're gonna see in the next like 5 years

[@Mr.JTMfpv]

Looks slick digging the top plate, I ended up installing my o4 Pro in my Moz7, which reminded me of this side plates,

[@RonJarek]

The flight footage is so smooth and the image quality looks way better than a gopro!

[@flyingfrogfpv]

@@RonJarek Better How?

[@daemn42]

Regarding extreme conditions, I was impatient to test mine when it arrived yesterday so I took it out in 40mph winds gusting over 50 and it handled them fine. But I did experience an occasional glitch that felt like a motor desync which would cause it to instantly rotate on roll axis about 20-30 degrees, which is pretty scary when you're proximity flying. Thought it might be reaction to the turbulence and me using some tired 5S packs. But flew again today in no wind conditions and experienced the same glitch, while just cruising along. Seems to happen when I'm just making a nice banked turn with a little G-loading. I've got some new 6S batteries on the way so maybe it'll behave better on 6S than 5S, but there's no reason it shouldn't be able to handle 5S voltages (which you could see on the bottom end of a 6S LiIon pack anyway). I'm curious if anyone else experiences the glitch.

[@frankcastillo8869]

It was probably tuned for 6S and a bad 5S battery probably has a lot of voltage drop and that could be the source of the glitch.

[@daemn42]

@@frankcastillo8869 That's what I was thinking but I've been digging through the blackbox logs (nice that this FC has 32GB flash) and I can see the glitch in the RC input on the roll axis. It's jumping to full left or right for a few ms. I saw it happen live a few times while monitoring the receiver tab, but after about 15-20 minutes of stick wiggling it stopped happening. Never was able to confirm if the bad RC input actually originated on the transmitter or is just between RC Rx and flight controller. If the Tx gimbals used old style potentiometers I'd say they were just dirty or worn out but it uses contactless hall sensors so it shouldn't do that. Will try to blow it out anyway.

[@modeminho]

wish they would sell the frame only.

[@arthurgiourdjian9071]

I'm sure they will in a couple months

[@MCsCreations]

Awesome flying and review, Albert! Thanks! 😃 Stay safe there with your family! 🖖😊

[@AlbertKimTV]

Appreciate it! 🙏