IH Dresser TD25G bulldozer is back in the shop for some major engine and undercarriage repairs

[@jmistret419]

You guys are the only u tubers that i never have to fast forward through any of your videos. Great job

[@C_CEQUIPMENT]

Wow, thanks!

[@stephenmeeks684]

Clint, you are amazing.

[@LawrenceHicks-w9v]

Absolutely I love the content and don't want to miss ANY of it !

[@LawrenceHicks-w9v]

Love them old international dozers !!

[@patbullard9276]

Tucker don’t pay any attention to the trolls. Those of us who enjoy the videos for what they are don’t focus on any negatives. I watch because I like the content and the fact that I can watch without vulgar language. And I also do like the people, all of y’all.

[@logancarter2134]

I also appreciate not having to listen to music of any sort.

[@charleswelch249]

You did a great job, Tucker. And never apologize for being yourself. You're a hard-working young man who has a bright future. And the repairs went well.

[@michaelbrausch8874]

Bridgette brightens the day when she walks into the shop!

[@DacDac-w7r]

Love Tucker "Weld it", "Weld it", "Weld it" and he is a good camera man.

[@deanchapman6425]

It's great to see people that do things the right way even though it takes longer many times. Great video Clint, Kevin ,and Tucker. Keep it up gentlemen.

[@rayhewitt4688]

These guys. Do a damn good job

[@brandon2076]

Rockmount Reaearch and Alloy makes a stick electrode that's designed specifically for removing broken bolts deep down in holes, worth a look at their catalog. Stuff is expensive, but they don't sell junk!

[@lakehunter48p55]

As my Dad said in our garage, you charge $1 labor and $99 know how. You guys deffently know what your doing. Years of experience. Great to watch precision work.

[@T.McGarry]

Torch-master Clint versus seized up steel = Maximum scorch, ultimate victory

[@jimhooker5241]

Tucker stay being you, you are a vital part of C&C Equipment.

[@markbulva4188]

Try two things in conjunction with bolt building. Wax. When your item is smoking hot melt a candle into the threads. Next hit the master link with the biggest air hammer you have. Helps break the rust bond

[@ccclc6159]

kzbin.info/www/bejne/mHrYn4Vqi7ForMU

[@BrianFullerton]

An honest "that wasn't bad" after pressing that pin...after hours of burning, and restarts/ adjustments to the plan, while the special press hangs in the air off a forklift, with all kinds of other necessary gear is scattered about. Amazing how the spirit can be trained to endure. And that some folks calibrations are just different than others (after years of hard earned development). Much respect.

[@dansbrown1313]

Clinton and Kevin are the "A" Team! You never give up, till the job is done right!

[@jeffreyball8060]

I worked over 40 years in the underground mining industry. I have removed a lot of broken bolts by inserting black pipe nipples in bolt holes. It does not require welding the full length of the nipple. The nipple sticking out the holes was long enough to get a pipe wrench on to remove the broken bolt.

[@JeffM-fy8tz]

I was just going to make a similar suggestion using a piece of black. Not having threads makes the pipe a little stronger and more length gives a bit more for the pipe wrench to bite on.

[@anthonywilson4873]

Some bolts with the heads cut of and slotted ends two per gasket would hold gaskets in place and act as a guide for the inlet manifold. The guide pins can be used for lots of situations. We use them on engines sealing with RTV sealant as moving stuff around to install it can wipe it off. They help take the weight as well! Love the content not worked on Tracked vehicles.

[@stevemcfarland39]

When I was at CMI Corporation back in the 70's, the machine shop hated it when we fixed their screwups with 7018. We could hear them cussing two bays away.

[@everestyeti]

Even though those gaskets had gone, it was still in a better condition than Kevin's wreck. 🤣 That is definitely a big toy for a big boy, lets hope you get a good price for it. 👍

[@Chris-wb7ni]

Man I want that Milwaukee tool box loaded with those tools

[@mischef18]

Great video as always guys. Kevin blew up his engine with tooooo much turbo, oh dear the turbo strikes back. Safe travels. Ken.

[@mrjohnReview]

"It was exciting to see the IH Dresser TD25G bulldozer back in the workshop for engine and undercarriage repairs! Heavy machines like this need regular maintenance and repairs to ensure optimal performance on the jobsite. This is not just a repair, but a way to keep a legendary machine ready for action. Hopefully after the service it will come back stronger than ever!"

[@texasproud3332]

Battery powered tools Milwaukee dewalt and others prolonged my work life probably 10 years these younger folks don’t even realize

[@I_Am_Your_Problem]

Then you vote for a clown. You're the product of undermining education for more than 70 years.

[@robertmccullough4822]

Never got to work around Heavy Equipment but have always been interested in "The Big Boy Toys". At 63 I still enjoy learning how to build and maintain things and look forward to each new video. Thanks for the Great videos.

[@garysoykin2783]

A lot of our local shops have gotten rid of their snap on cordless stuff and switched over to Milwaukee. Everybody that I know are really enjoying the Milwaukee tool. There’s a quarter of the price of Napa and they’re just as damn good if not better😊😊😊

[@robertkelley6765]

I like when you go to auction I see some suff I like, like that little tractor you bought with the front loader.

[@billtopka2584]

That TD25 is huge and the tools are just as big! 👍😎

[@jjmyers64]

Your guys’s videos are awesome, I sit here watching you guys work and you make everything look so easy. I’d love to come to work there on that equipment, nothing better to work on than heavy equipment. it really is a job of skill testing.

[@johnhampson7]

Good job guys. That's a lovely old dozer and deserved a decent job done on it.

[@thomasleonard1846]

Man up Tucker, nothing wrong with your attitude! Keep on keeping on on!

[@philstreeter9703]

Good to see Tucker having fun. That is one big dozer. Great video.

[@David-ce9hj]

Great walkthrough tutorial. Additionally a wise decision to fix it properly. Finally, that dozer is huge.

[@logancarter2134]

Another fantastic episode. Giving old machine new life. I enjoy the content and banter between y'all and not having to listen to music of any sort.

[@Freester86]

I hope Mr. Kevin paints this one like he did the last one. He did an amazing job on the last one yall had.

[@dennismackiewicz1032]

All that I use is Milwaukee tools. They have NEVER failed me.

[@riverflyswatter]

I don’t like to complain, I knew other commenters would do the dirty work I guess that makes them epic. I have confidence that you Sat down Tucker and gave him a little private talk after he suggested you continue with the shit show and weld the other MasterLink. Good job, Clint you’re teaching that boy, right

[@martinadler5951]

Once again fantastic work-the correct way.

[@MrPossumeyes]

Tucker, you just be you. Grumpy, sad, happy, whatever, you just be you. I like you, mate, even when you're a sourpuss. And I'm an old boy who understands young fellas, cos of what I once was.

[@Zerostar369]

Truth. Nobody cares, just be you. Everyone will bust your balls no matter what the trade. The only dudes that dont get hassled are the dudes we dont like!

[@jackgreen412]

I understand moodiness is all part of growing up. It all goes away as you as you age, then you turn into a grumpy old man.

[@MrPossumeyes]

​@@jackgreen412 I smile, now I'm a grump. But that helps me relate to young Tucker

[@leokeeney6673]

I discovered in my old age that I finally know everything about nothing

[@MrPossumeyes]

@@leokeeney6673 Cheers, Leo. Gotta admit, getting old has benefits. O'course, young fellas don't appreciate aches and pains.

[@dalebailey1844]

My dad had one of those monsters NEW FROM THE LOT. in One week, the motor was dusted due to that manifold being curved with the middle being warped. I hope you but a straight edge to it. i can remember the dealership, rebuilding the engine in are lot. they were to cheap to send it back to their yard for the build. It took them almost a month.

[@davebrookbank4831]

I would love to have that small tractor for a winter project. 😊

[@gordonagent7037]

Great job team, I love the look of the Dresser dozers, something cool about them. That hydraulic pin pusher is huge, goes to show what kind of forces are at play in a working machine of this size. Great vlog as always, nice to see the cameo from Mrs Clint and kudos to Tucker for coping with all the shit poked at him.

[@michaelhalfman9844]

I appreciate the way you share your thoughts and explain the options.

[@gwbuilder5779]

Tucker, The comment section is like a stranger driving by and honking their horn. You don't know them or why they are honking. That's it. Opinions are supposed to be ignored. By the way, the "Gun Show" reply was excellent.😂👌 Keep up the good work everybody.🤙

[@stevebeavers3754]

Lots more to track repair than I thought.

[@beaverc2884]

28:00 I learned a long time ago when doing that procedure, the longer you let it cool on its own, the more chances of success you will have.

[@almaylin464]

My dad was always good at welding in a hole removing broken bolts. When the Mack E-tech came out we had a bunch of valvetrain issues including braking the pins for the cross bridges ( about 3/8 diameter) he could normally weld them up and snatch them out

[@MySORRELL]

THANKS!

[@Cemilodmir]

Nice job bro 👍

[@anthonywilson4873]

Had to be welded (Field fix I am guessing) or replaced as the teeth were worn on the track halves of the master link. The four bolts clamp the two components together but the teeth hold the location. Worn teeth is just going to chop the bolts or loosen them under load. Heavy work.

[@ipaddlemyowncanoe.7441]

Yeah that's quite the job. You did all right. Yeah it shouldn't take you long to get rid of that I think. Great job! New equipment that's quite The Press. 👍👍🙂🇨🇦

[@popmazzoc3632]

Outstanding, epic, I like it.

[@stephenmeeks684]

We love you, Tucker, because you are you.

[@Bman2020]

That’s some heavy duty work right there great watch what a beast 👍👋🇨🇦

[@King_TuTT]

I just love ultra heavy duty equipment ! good stuff

[@jerrykelly7052]

yall all do great work

[@markfuller9886]

It works You have to drill a hole in the broken bolt first because by the time u get the broken bolt hot enough for pen u have already moved up 3/13 anthen u just teist it off Hope this makes sense

[@ButchE30M3S14]

If you guys didn't put anti-cease on the link bolts I'm gonna go bananas LOL

[@C_CEQUIPMENT]

We always do

[@rayhewitt4688]

I. Don't know who train you but you do listen , that's what makes a good mechanic

[@bob-bf3ru]

Did not realize how the master links meshed together, neat experience

[@lordcaptainvonthrust3rd]

Always enjoy your videos Mr Clint And before you think about having a go at Tucker, keep in mind his Pops has a successful business and popular KZbin channel so everything you do is gonna be scrutinised. And in some cases criticised. He's still only a young man and personally I think he's a great kid with a no ego and a massive work ethic You be you Tucker 👍

[@terryrogers1025]

You look to be pretty handy with that gas axe (torch) young man. Thanks for the video, it brought back memories both good and bad😮, enjoyed watching, sweet piece of old iron, that dozer is.

[@peterwalton1502]

That wonderful machine is as big as my house in England 🏴󠁧󠁢󠁥󠁮󠁧󠁿😀😀

[@johnwenzel9252]

Thanks Clint!

[@andrewruble7706]

Another great video from the shop! The can do attitude by everyone is great to see. Always figure a way. Enjoy it and thanks for sharing.

[@MySynthDungeon]

Alright, back at the Shop! Tucker Rocks! Here we go! ;-)! Cheers!,,,and Kevin blew his engine ,,opppps! ;-)!

[@edwinhsingmaster9135]

So glad to see you guys using Maltby Penetrant, it's been impressing me for decades. Using a little vibration with it, it works ever better. H from Oregon

[@Barnagh1]

For a repair you’ve said you never did before, you tackled it calmly and logically as you always do. Dozer work is hard, heavy and potentially dangerous but your coolness makes it look straightforward and relatively easy.

[@alandawson2813]

Epic, Epic and more Epic

[@jeffalbee1921]

Just like every other video - Clinton does all the work and Kevin does his comedy routine.

[@kevinmurray7135]

She will make someone a very nice machine excellent job on the master link that was a very smart move the bolt stacking an welding tricks was a very good lesson that it can be done you guys rock Mr C 👍😎🇺🇸

[@heatherlane9270]

Nothing like a new challenge - always learning even for first time. Interesting that you attempted to fix and then had to purchase - at least you tried Mr C.

[@AdelinoGambiarras]

You guys did the right thing in putting the new master link is much much better.

[@UncleManuel]

It's always fun when two Army dudes appear: Major Damage and Major Repair. 😁🤘

[@NeilMaclachlan]

Shes a big dozer right enough...great job on the master link etc...stay safe and see you soon

[@ronaldheit196]

Another awesome episode of Clint and Sausage Fingers Kevin rebuilding a struggle bus master link on a Dozer. That has to be the hardest one they've done. Young Tucker looked like he's not getting enough sleep between school and worka part time job.

[@ColinLennard]

It is good to watch the master at work. However the master is also the master at being the "being the master wind-up merchant" (the best part those that he winds up don't seem to realise that they are being wound up).

[@kevinkinney5445]

I'd never seen someone make a bolt before. Pretty creative, I gotta say.

[@allenandtammyterwilliger1201]

Tucker I just watched a story on history channel that @ some company's in Japan you can't even clock on to work without smiling 😊😊 enough to a computer screen to show happiness. A I is crazy isn't it

[@dustyroads834]

Those intake manifolds are known for warping. Had this problem on a KTA 600

[@btorkos5896]

If your happy and you know it 👏

[@tubeDude48]

At 49:00, that's one impressive tool! ✌

[@williamdriver4666]

Tucker, just do you!! Don't ever worry about what other people think!

[@philipberry2704]

Another EPIC Video!!! Tucker don’t let the haters get you down You are a very talented young man

[@Robert-ns7id]

Kevin blowing up his motor with too much boost means he's a more power guy he's one of us.😁

[@alandawson2813]

Just be who you are Tucker. Love the channel, keep on keeping on. I enjoy the content. From kiwi land.

[@jamesedwards7241]

Removing broken bolts by drilling was something we did a lot of back in the day and used a series of plugs. bar steel runoff in the lathe to match the bolt size and centre drilled with increasing sizes so you fed your drill through the plug onto the work leaving you always centered on the work right up to your threads.

[@clarencewiles963]

That sounds epic. Thumbs up 👍 and it looks great too😎

[@giggitygiggitygoofg6069]

Your son is correct. You should have just welded that as the pins have been rolled already and the chances are next time any works needed on those tracks it'll be time to replace the tracks and will be cut off and scrapped.

[@chuckolson5825]

Good job again always something new that I have never seen. Keep em coming!!

[@MySynthDungeon]

Lov Clints funniest! Cheers!;-)!

[@brianlowes1933]

Tucker I always say people that live in glass houses shouldn’t throw stones because every one get grumpy and people would still have something to say if you had a smile from ear to ear

[@RobertWelch-fs2fv]

Clint ,another excellent video .👍👍👍👍👍👍👍👍👍👍my condolences on the el Camino may it rest in peace ! Boston wise guy 🇱🇷🇮🇪🦉

[@giggitygiggitygoofg6069]

If I were you I be incurring Kevin to start another channel covering the painting side of your workshop. I assume you started your channel to help with exposure & showing off wot you guys do to the machine you sell etc. There are alot of people who are very interested in not only the painting side but Kevin, the man, the legend with the sausages for fingers. .

[@C_CEQUIPMENT]

Problem is I never get any views on those kind of videos so we don’t do them

[@Lee-At-Green-Pheonix-Rc]

Just be you Tucker lad only happy when the missus hangs out or he's racing lol

[@maxobara1496]

This baby is on the trailer and gone!! Nice work.💪 And Kevin needs supervision on the El Camino!!😂😂 And Kevin you’re better off with Mrs. C’s electric bike then that Dodge🤮 Keep them coming Mr. C and nice cameo Mrs. C💪🤗🇺🇸

[@alwatts3778]

I have the same issue as you Tucker, I try and say that my normal relaxed face just looks grumpy but it usually falls on deaf ears!! Be yourself!!

[@danmay9728]

Like the videos, keep up the good work. As allways be safe. Peace.🇺🇸

[@BossmanEight]

Agreed with Clint about Milwaukee tools. I've replaced all of my Dewalt, Porter Cable, & Bosch tools with Milwaukee. I can't afford the top-of-the-line Milwaukee Forge but even the mid-range brushless Milwaukee tools beat the socks off of anything else.

[@kevinstone3454]

You guys always deliver great videos no matter what you are doing or what you are working on its always entertaining to watch I've learned some helpful tips from your videos and I really appreciate the effort and hard work y'all put into everything you do keep up the great work thanks for sharing y'all's day to day lives with us.

[@rockman531]

Hey Clinton, You done did good!! I bet it sells within 10 days! Great video! Thumbs up. Stay safe. Jim

[@JohnJ-q5j]

I was just watching you pull that manifold and caught myself looking around the side of my monitor to see if I could see what is was hanging up on LOL

[@Mart-u2u]

Nice work, guys. And thanks for the videos!