Folding Guitar Stand // Woodworking How To (RE-UPLOAD) | I Like To Make Stuff

I made a folding guitar stand out of walnut and brass! Thanks to
TOOLS & SUPPLIES:
kit.co/iliketo...
kit.co/iliketo...
In my old office, I had my guitars hanging on the wall. In the new house, I didn't want to lose that wall space so I wanted to make a guitar stand that was functional and portable.
I started designing the stand in Illustrator so that I could get an idea of how big each piece needed to be. The sizing and geometry is important because I wanted the stand to hit hard stops when it was unfolded without having to add any additional fasteners.
Unlike most of my woodworking projects, I used the Illustrator template to make a prototype out of some scrap plywood. I was very happy that I did, because my geometry was all wrong and I would have wasted some expensive hardwood. After a few iterations I had a working model and transferred the new design to some pieces of walnut. I used brass hardware to contrast the dark wood and even had to make a custom latch out of a brass sheet.
I used The Wood Whisperer Thread Taps to tap holes directly into the rotating legs so that I didn't need to use a nut on the outside. This choice helped keep a minimalistic look to the whole project and lets the beautiful walnut take center stage. I CA glued thin strips of EVA foam to the surfaces that would touch the guitar to prevent scratching and I finished the whole thing with two coats of Danish oil.
This stand is sturdy and elegant enough to show off my favorite vintage guitars and will add a custom touch to my new music room!
If you enjoyed this woodworking project, you'd love my others too.
Subscribe: bit.ly/ILikeToM...
Check out my TopVideos!: bit.ly/ILikeToM...
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestu...
Want to support ILTMS? Get exclusive content and more...
www.iliketomake...
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Folding Guitar Stand // Woodworking How To (RE-UPLOAD) | I Like To Make Stuff
• Folding Guitar Stand /...
I Like To Make Stuff
/ iliketomakestuff

[@Iliketomakestuff]

I had to make some changes to the original video and re-upload. Sponsor stuff... Sorry about that :/ I learned from previous comments that the foam I used MAY interact badly with nitro finishes on nicer guitars. Leather would be a safer option for padding. Also, extending the "feet" back behind the guitar will make it more stable , although mine is fine for me personal use.

[@elevierbeltran8703]

I Like To Make Stuff 4th like first comment

[@straight_edge_5139]

hi bob

[@patrickbertke7337]

Love it

[@elevierbeltran8703]

I Like To Make Stuff why does it say 2 days ago on your comment

[@lucassurgeon4122]

I Like To Make Stuff no prob Bob 😊 I'd probably rewatch this 4 times anyways

[@samshim3149]

Try putting blue tape on the wood and gluing the templates to the tape. It would make taking the templates off a bit easier.

[@adakhochalai]

More guitar stuff please

[@pablolynch1152]

Very nice.

[@moistsnailpoop5295]

Wow, that new shop is huge

[@hanswellenbrock9786]

Bobification bell 🔥🔥

[@Iliketomakestuff]

Ha! :) Love it

[@doubledarefan]

A bell that bobs, not rings.

[@Halsafe]

Even though I watched this before, I still watched it again. Love your videos man, keep up the amazing work

[@Iliketomakestuff]

Thanks Adam! I really appreciate that!

[@tysonshores507]

I like this a lot

[@iamaioshi]

I missed the entire project cause I was laughing hysterically at RGLRPRPR tm hahahaha that is gold

[@Iliketomakestuff]

:)

[@danthemakerman]

It looks classy! Nice build and prototyping.

[@Iliketomakestuff]

Thanks Dan!

[@federicoamato8782]

more guitar stuff

[@djAnakin]

Rewatching cause Bob deserves it! Also, where can I get some of that rglrprntrppr? XD

[@RPNocando]

I think this is a really nice build but also it's one where looks comes before practicality. Usually in your videos it's the other way around. As you said, the brass hinge is something that could be improved as it's the crucial piece keeping it all together. The stand looks awesome but also like it's about to collapse under the weight of a guitar so it leaves a feeling of disappointment because a lot of effort went into it.

[@yoitanthony]

Beautiful mustang at the beginning lol

[@MakeItSoph]

That looks awesome! I'm gonna try this!

[@CliffLewis28]

Brilliant! I love the portability of your design. I think I will have a go at making some. I haven't been a subscriber for very long, so apologies if you already built one, but how about a collapsible music stand? Thanks 🙂

[@thomasyacconi9695]

How do you know what finish to use for different types of wood or different projects?

[@snafu673]

That was a cool project video! : )

[@graphicartdude]

Nice design. I think it could be improved upon aesthetically though (better contours and tighter fitting connections where the stand folds); though taste is subjective. Thanks for sharing.

[@justasmeska1889]

any ideas how to make one for v shaped guitar ?

[@NeonLightedDreams]

I'm sure we'll hear about why he reuploaded it on the podcast. I can't handle not knowing!!!

[@wazzap500]

Marco B What podcast?

[@NeonLightedDreams]

UrbanDanger ! Look up the "Making It" Podcast, it's on iTunes and Google play I believe. It's him, Dave from Make Something and Jimmy DiResta. I thought this was common knowledge by know, so I'm glad to introduce someone new to it!

[@greenkitty6482]

Why did you re-upload????

[@map1526]

MAKE A ELECTRIC GUITAR!!!!!!

[@averagegamer2125]

I want to be like u

[@JonathanRansom]

I watched this again because you know... support and all that... You're almost to 1.5 mil subs!

[@Iliketomakestuff]

I really appreciate that man!

[@ryandownie3574]

*Bob* starts off video explaining everything he did wrong and just makes a new one *Me* cuts wood wrong and ends up with my table saw catching on fire Lol

[@fella7291]

Ryan Downie My life in a nutshell

[@jdgindustries2734]

Sounds like an awesome video. Got a link?

[@DylansDIYWorkshop]

our work table saw actually caught fire once.

[@JoeldaSilvaVicenteFilho]

hey, at least you have a table saw :V

[@DylansDIYWorkshop]

Joel da Silva Vicente Filho I don't understand why people say that. Like I've never complained that I don't have a tool. There's always someone who has that tool that you can become friends with and learn how to use. Or you could just save up enough money to but that tool. I started off with nothing. Got a job at a lumber yard. Spent everything I made there on tools. Ended up with a cast iron table saw, a lathe, bandsaw and huge sander. So maybe people have actually put in the time and the effort to get to where they are. Just a thought

[@PaulJohnsLife]

Rewatched. No idea what you changed. :)

[@WorldlyAspects101]

You should make a headphone stand.

[@przvl824]

Toshi Harris definitely

[@markm4439]

Is the template available for public use? I would like to make this for someone and would love to use the template you made.

[@forestlampcraft472]

Bob starts off video explaining everything he did wrong and just makes a new one

[@Dialogue_SC]

#RGLRPRNTRPPR

[@Wolfie2TMX]

RGLRPRNTPPR of course

[@Ismail-xq9ry]

😂😂😂😂😂

[@coconut_milk7167]

"Im not worried about it falling at all" Puts his hand behind out of fear of it falling, but really nice build i might try it

[@oxfd611]

don't know if are aware of this but CA glue can have a thermal reaction with some foam rubber material . Friendly FYI.

[@_andy_au_]

"I am not worried about this thing falling backward" *Puts hand behind guitar* almost falls backwards. Seriously though, love your work Bob

[@aarushkundu6045]

I think it's very helpful for the people who have the necessary instruments like the machines u have but try to upload some craft work without using ur machines so that those who don't have the machines can also craft out something good.

[@eiderglast]

Great build, but it looks like it will topple easily once the guitar is in place.

[@mikerojas6626]

I would have used leather instead of foam but that's just me. If you are going to put that much work into it why would you use anything else.

[@johndube1731]

Nice Mustang.

[@rodrigoandresgonzalezcarva3539]

Habia mirado a huevo el proyecto, pero quedo bastante bueno...🖖😎👍

[@oregon.emergency2017]

“Im not worried aboit tjus thing falling over “ puts hand behind it to catch is to it doesnt fall

[@dmgallo]

Love this project! Are the plans available anywhere?

[@nobull-dozer3356]

If you were to add a u Shape it would enshore the guitar would stay weren’t supposed to and not fall over .

[@poephila]

COOL! I wanted to make one as Christmas gift this year. Perfect!

[@DylansDIYWorkshop]

I really like the look of this Bob, I'm really surprised with the fact the guitar didn't tip over. just because It looks so short. You've inspired me to stop surfing youtube and to get back to making something!

[@davehernandez4177]

What do you mean “the stand is not perfect?” It’s perfect!

[@mdmomen9124]

I am pretty sure that he didn't even do anything differently

[@Jsyrinsart]

What's the background music? It's super sick.

[@Oldman-Havok]

Just watched it for the second time.... Noticed no difference. Lol

[@MCsCreations]

Again?

[@charlesmanning]

Can you do a build where you don't use any power tools

[@hola123banano]

Alguien tiene los planos que nos los comparta

[@limitetpancake9459]

"Hey i'm Bob and i Like to reupload stuff"

[@pareshpanchal91]

Make an infinity mirror table

[@olivermac6882]

What are your favourite bar clamps

[@hola123banano]

me puedes facilitar plantillas para hacerla

[@edadpops1709]

Sorry man your fast forward is to fast and is frustrating. Your speaking style is like your late for work or something .cant watch

[@Iliketomakestuff]

Not for everyone, hope you find a channel that works well for you.

[@gabisanmiguel3408]

Can you tell me the size so I can do it please

[@tooljunkie555]

Ahh!! i was gonna say!!.youtube's got some serious bugs..lol "Take it easy bob!"🍻🥞

[@randalosgood]

Oh lord, blue tape? Just wait 'til you try and finish it. They make double-sided woodworking tape just for situations like yours, use that!-)

[@tboylen1]

Very nice. Mine's welded steel. Yours looks a lot nicer, but I play live a lot and I don't think it would hold up to the amount of punishment I'd give it. Still, I might make one for home.

[@Agamimg360]

Also It looks great but I have Grand children running around and am afraid my guitar will get knocked off or some thing So I am looking for something I can hang on wall of stand in walk in closet.

[@PJGalati]

I don't have a guitar, but I do love stuff that folds up! I like the design, simple and classic. If you plan to make more, I have a suggestion on the back lock: You can cut a strip down the middle as a channel for the screw, then offset it lower on one side so it will slide into place and also slide closed. This makes it automatic and a little more stylish, don't you think?

[@SirBenJamin_]

Can you please change your intro to "Hi! I'm Bob *and* I like to make stuff!!" ... ever since I discovered it was "Hi I'm Bob *at* I like to make stuff" I haven't been able to concentrate on the video, I'm totally distracted by the fact that I thought it was "Hi I'm Bob *and* I like to make stuff!" and not "Hi I'm Bob *at* I like to make stuff". Do you see my problem?

[@mynameazeus4331]

Is it really? I need to see this...

[@mynameazeus4331]

No why

[@MarcosFPV]

I have two Guitars but never learned to play however i would like to make a stand like this or maybe a wall mount for the Guitar.

[@jhunphillip123]

Still watched anyways because I like to watch stuff

[@Oldman-Havok]

Why another upload???

[@Agamimg360]

Okay so while watching your build It came to me how about using leather for the hing? it is cheap and can be replaced the same.

[@cheesyswimmer7863]

Bob, I want to make a Mancala set but I don't know how. Can you make a video on making a Mancala set for me?

[@elian116]

Where can I get the template?

[@Herrnedomkull]

I Love this channel. such energy! I have Been a subscriber for a while now, I've watched almost every video. Yesterday i even watched some of them from your website

[@malininrn]

Like

[@Whiteoverred5]

Can you plz make plans?

[@jackeyboiii4019]

Watched again..... YOUR VIDS ARE THAT GOOD i can watch em multiple times NP

[@bobbygordenakaredneckbilly3856]

I like this idea. I may use it, but I would like to make it a double stand for two guitars that could be separated.

[@jaredcohen9552]

Whats the difference?

[@usmanworks2616]

hey i like all of your videos. please make a acoustic guitar too. you already make a guitar case and stand. now time for the guitar.

[@joicevincent2057]

I love watching everything you produce and I don't even make any of them. Your passion and perseverance is outstanding! Your family must be so lucky

[@rishiviyan]

Nice one. Really very simple and easy to make. It's really given me a good idea to make it myself. Tnx

[@bilalhaloui5073]

Can you share your template for use to print and use too ? I really like it and I would appreciate it a lot

[@dchristou8155]

Get a CNC router. It will change your life.

[@Iliketomakestuff]

+Dk92318 C I have one but using only that makes for pretty boring videos.

[@regi3.1]

Nice

[@davidkleinman4920]

I would love to see you build a guitar, maybe one from a kit and one from scratch.

[@p1ng1e81]

Hi

[@jaronevans9273]

Cool

[@goodgoat6019]

Will a dreadnought acoustic fit on that stand? Love the walnut and brass.

[@p1ll0wt0p]

Could also make for an iPad stand, or cookbook stand... I like it!

[@MTNurse]

What a great project!!! Thanks! I LOVE Walnut.

[@Shadow-zl5fv]

Make a bed with a hidden compartment. Haha .. this i say right?

[@graf_is_hyper1267]

hello

[@ROMEYYOUROCK]

Deja vu

[@FredMcIntyre]

👍👊

[@nickdesert7304]

Hi

[@njmcliffe]

How about making contrasting wooden bolts?

[@neroforte6183]

RGLRPRNTRPPR, now in the ILTMS shop!

[@droptopsalvador1864]

Yeet

[@cjberthold94]

I love it, you should sell them on your page I'd love to get my hands on one

[@John316Ross]

How did I miss this Gem! I have been following for at least a year!

[@korbinbrown4185]

nice I will do it for my woodworking class.

[@brandonkruse2266]

You should make a hanging guitar hook...

[@pinkponyofprey1965]

Cooooool! More music-oid projects, please! :D