RP500 LOOPER UPDATE

[@claytoncampbell7541]

Here I am eight years later to finally learn how to use this thing. Very tasteful playing and excellent lesson!

[@SergioFelix]

Can't believe I'm watching this in plain 2024 and still learning from it haha thank you very much man!

[@HumbleHeartMinistry]

Just bought this antique off of eBay for $105.00 and received it yesterday. Well, I’m selling my Headrush MX5. This thing blows it away! Easy to dial in all the tones I need, no menu diving, and sounds fantastic! Can be setup for presets, or use as a pedalboard, turn on cabinets, or use just effects with press of an exterior button! Makes my amp and me very happy! No more spending half the time I have for playing trying to search through menus and dial it in.

[@silent079]

Even though this video is 5 years old it was still extremely helpful. Thanks man!! :)

[@paulspielman2517]

Thank You, for Really good, clear info. So rare to find someone on youtube who can think, talk, and chew gum at same time!,

[@rmax5150]

WOW! AWESOME INFO!! I've been using the RP500 for quite a while now and had no idea there was a Looper function download. Thank you very much!

[@xaviercillope4445]

Already happens with the downloadable version on the official website puts the name of the first version, but when you start the program you select show all existing versions, and choose one that interests you :) This is a amazing multisoundpedal.

[@VintageRandom]

Hey there. Absolutely. The USB recording on the RP units is excellent. In fact, doing it through the USB allows you to record in stereo. The way you would set that up is to hook up the USB (run drivers on PC I believe) and you would just make the RP500 your sound interface. After I did this video, I started using the RP in just this way. I hooked up my monitors to the headphone jack of the RP and it sounded awesome. Just be sure to read the manual for setting the levels. Thanks!

[@BOUZOUKISIGNIS]

hi mate! can i ask you something? i use the rp in front of a hot rod deluxe.....and when i use the amp function on the rear button of the rp500 sounds terrible to my ears and when i switch to the mixer function sounds better.......some other owners here in GREECE noticed the same .....can you please tell how do you use the rp in front of an amp? with amp function or the mixer? thanks in advance

[@jakebrickhouse]

thanks man... i got one of these pedals and i had no clue that there were updates available that could do this... thanks

[@delacruzneili]

@ImageRiver thanks man.. the AMP/CABINET effects in RP500 are great! really great!..

[@VintageRandom]

Awesome. I think you'll like it very much. Have fun!

[@Phoenix_VanDerWeyden]

Hey there !! Thanks a lot for your feedback !! I´m getting this unit next month !!!

[@xaviercillope4445]

Where can I download the version 2.0?

[@luiscarlosscb7612]

How much time can the RP500 Loop ?

[@VintageRandom]

@dccowboys1 Sure can. The presets need to be within the same bank of 5 while your looping.

[@beamerstrumpet]

THANK YOU! I JUST ORDERED ONE FROM EBAY!

[@VintageRandom]

@BOUZOUKISIGNIS Hey, sorry for the delay!! I think it's all up to your ears (of course) but that amp/mixer button does matter in a direct-to-board situation. Not an answer to your question but you might want to try going from the RP into the effects return of the HRDx. Just make sure the volume is down on the RP. I think the issue is that your preamp on the HRDx is messing with the tone of the RP. By sending the modeled tone to the power amp only (FX return), you will get good results.

[@VintageRandom]

@delacruzneili right on man! happy you're happy!! Merry Christmas!

[@VintageRandom]

Hey kpdubbya, this is absolutely true. I noticed the same thing. I think the RP500 has it's uses and is a fantastic all in one for those who want effects AND amp modeling but like any effects unit, there are weaknesses. Overall, for the price, it's great. I also just picked up the Line 6 M13 which I will be doing a vid on shortly. Great unit for live use and it has a separate control bank for the looper. Better for live use. Thanks for your comment and please subscribe! Blessings, Joe.

[@Phoenix_VanDerWeyden]

I know you told us you use a Line6 Tone Port for recordings but can we use the RP500 as its own soundcard as well ?? I mean , can we record with a good quality through its usb port ?? Thanks a lot !!

[@VintageRandom]

@yashespa hey there. There is a setting that assigns the amount of pressure that is needed to actuate the way switch. Take a look at the manual (I forgot how to do it!!)

[@dylanchase6161]

With my board I press for 2 seconds and my board just switches to different sounds I can’t get to the looper. Do I need to update my board or something like that to get the feature?

[@VintageRandom]

Hey Neil. No, unfortunately you can't store loops on this thing. You would need a dedicated looping pedal for that like a Jamman or Boss RC-3. This is more for creating an idea or two. Thanks!

[@VintageRandom]

Hey there. Take a look at the calibration on the wah. I haven't heard this issue before so I'm certain it's something with the calibration. Thanks.

[@SRFDriver]

Is the RP500 Version 2.0 software still available anywhere?

[@megaluisdeth]

@801Current You a usb cable, the one you use for a printer. Then you connect it and download the update(takes a while). The rp500 does not come with a usb cable, you need to buy it separately. Hope this helps.

[@UNGfxDesign]

i still have this pedal cannot find the software update for it anymore :(

[@VintageRandom]

@delacruzneili Sorry for the delay in answering. Actually this is a great question. If you're using all three parts at once as a complete tonal solution, you will only hear the tones as they are supposed to be represented through a full range system (a PA system, computer monitors, studio monitors, headphones). When the engineers designed the models, they did it so that the output would emulate the total system. If you're playing through a cabinet, simply turn off the cab model in the unit.

[@delacruzneili]

@ImageRiver can't thank you more.. my amp sucks.. so i rely so much on RP500 for amp effects.. thanks again..

[@dccowboys1]

@ImageRiver Oh ok. So if I am on ballad preset 47 and record a loop, I can change to preset 46 or 48 which is Rockstar. How? When I hit down during a loop it goes to overdub mode, and up stops. Then when I hit the 1,2,3,4 or 5. It just adds the effects. Im assuming it has to be on pedalboard mode?

[@VintageRandom]

@Clandestine2233 Yes, it should have the firmware update already. When you power up the unit, see if it says Ver. 2.0

[@VintageRandom]

It just uses a standard USB cable; the same cable you would use with a printer. You can grab the updates from the Digitech website. Thanks!

[@olokunboyobabalolafikayo512]

Hi , Dennis is my name..my own RP500 don’t have loop effect, and how can put or how download it. Please help me out.

[@VintageRandom]

Thanks! Good wife indeed! You most certainly have the option of bypassing the preamp on the V22. (great amp btw). All you need to do is connect the RP500 output to the V22 effects return. That is basically turning the amp into a power amp without using the onboard preamp. So you'll have the RP as the preamp and the V22 as the EL84 power and cabinet. Note, you will get the best results when you BYPASS the RP500 cabinet model. Just choose "direct" on the cab model and you're good to go.

[@VintageRandom]

Hey Jim, not sure if my message came through. You can get the update off the Digitech website. They now have a "Looper Update" link in the upper right corner of their homepage. Merry Christmas!

[@Rickinch21]

Hey awesome demonstration there man! Keep it up! I'm getting my RP500 next year, I was going to buy another Looper pedal along with it, but with this I think I don't need it anymore THANK YOU DIGITECH!

[@jonathonbryant3419]

Do you know if the update is still available? I can’t seem to locate it anywhere!!!

[@jetharista121]

Its very useful video thank you so much😊

[@VIIIBr]

I know I am way late to this, but does anyone know how I can obtain the Digitech RP500 firmware (Version 2.0)? I can't seem to find it anywhere online anymore.

[@iBChaLuPAking]

Hey there! I recently purchased a used RP500 that was before the looper update so it’s not installed. I’ve looked everywhere for the software update to install it but can’t find it. If you have it could you please send me the file? I’d really appreciate it. Thanks!

[@stevieVantanna]

@801Current what specific USB cable do I need? thanks

[@joencindy2004]

Nice review and explenation... My wife just ordered me the 500, I was looking at the 255 and 355. Good wife! Now I can't wait for it to get here! Any trouble playing through your amp? I have a Bugera V-22 and don't think I have the option of bypassing the preamp....

[@basementcreatives7612]

How did you connect the rp 500 to your amp?

[@GigoTheDoctor]

Dude , what does this update contains , if you can explain me pls ? What are the improvements ?

[@VintageRandom]

Thanks man. Are you using the RP500 as the preamp for this setup or do you want to use the VK preamp and just use the RP for modulation, delay and reverb? I assume the first (which is how I used it with that exact amp). What you do is take the output from the RP and plug it in to the "return" of the VK. I would also choose 1/4 AMP because you're not sending the signal to a full range system. DEFINITELY turn off the cab modeling. Work with your levels and rock on. Thanks again!

[@dccowboys1]

Can you change presets during overdub?

[@VintageRandom]

@PatrickMcAlister Man sorry for not replying sooner... They are two very different animals. The M13 is, IMO, the best stomp modeler available. Absolutely fantastic effects and so many options. However, if you need to have amp modeling, go with the RP.

[@StrikeEagle14]

does the rp500 need to be connected to the computer to access looper?

[@adityaghosh5762]

after updating 2.0 version the padel is not working at all...what can I do in this regard?

[@suvrojyotighosh5731]

Plz bole Dao na dada kikore update krbo? Amarta version 1.2 ache.

[@gilgamexxx7928]

Hey I have a problem with the looping lengths. I start off with a simple measure, followed by another loop of one measure, but then when I want to loop a third overdub that is longer than a measure but it cuts off at one measure instead of recording all the way through, so i hear part of my third loop start replaying before I can finish it. Any insight?

[@Hendrllx]

Where can I get this update?

[@DDSnags]

Is there a way to change the the preset though? Like you're in voxdelay, lets say I wanted to go to whammy or wahsup or something while I was looping, how would I go about doing that? That's what I really want to know haha :/ Cheers

[@VintageRandom]

@CoversGuy Hey CoversGuy, thanks for visiting. Yep, you're correct, this version of the RP line does not include an effects loop. The RP1000 does come with this functionality. Looks like the RP500 is going for $299 at GC and the 1000 is $100 more. For a lot of folks, this extra $100 is money well spent. All said, the RP500 is still a heck of a bargain for all that it does. Basically the cost of two good effect pedals. Blessings for 2010. Peace. Joe

[@Frankda70]

Hey bro, I have a Peavey VK 212 that I want to run my RP500 through the effects loop. Where do I run the cables on my 500 to the Peavey? And do I bypass the cabinet models on it after that? Thanks bro, good vid.

[@miguelruiz3193]

Joe we cant change the bank when we are looping?

[@ShredWithMe]

Another questing...What is that cable called that goes from the pedal to the computer? I can't find them anywhere also...can i still update if i've lost my disc that came with the rp500?

[@TobyEllisSongwriter]

I've plugged my rp500 into my computer, but how/where do I download this firmware update? I can only see the 1.4 one? Cheers for the vid :) Can't wait to start looping on it

[@VintageRandom]

@delacruzneili Right on! Yeah, if you're playing through a power amp and a standard guitar cabinet, definitely turn off the cabinet modeling. Basically the RP becomes your preamp. Enjoy!

[@alejandroinfante1245]

Excuse me how do I update my rp500? and investigated and failed

[@FrankZen]

Wow this vid is 9 years old!

[@apiratpumjang7859]

How to update for looper

[@delacruzneili]

hello, can anybody explain to me the concept of amp effects? I mean the randall/marshall/mezaboogie/ cabinet included in a multi-effects? please, I'm having real hard times understanding it. If i have a Laney cabinet, why do i still have to use the Marshall cabinet amp embeded in the multi-effect guitar processor? please, I am so green with those concepts. hope you understand..

[@TobyEllisSongwriter]

@TobyEllisSongwriter *3 hours later* I have the looping powar! can I save a loop on a preset or is that tooo much to ask of a free update? :P

[@RandyRhoadsFan96]

hey man how do u download the looper from the website?? mine is version 1.2

[@deepenwadhwa4027]

Can I connect it to a Windows laptop or is it only usable in a Mac?

[@VintageRandom]

@yashespa You're very welcome!

[@Cmbg32]

Can it save the loops you make?

[@yabyron7addy7]

ooooh yeah thanks man i just buy one and realy your video is realy useful

[@megaluisdeth]

How do I update my Rp500?

[@tmvir3258]

Hi i am tudor from roumania and i have a guestion how you can install the looper?

[@VintageRandom]

@Rickinch21 Hey thanks bro. The looper is great for creating and for live performances. Only thing the RP can't do is save the loop but I just record the ideas on the Mac anyway. The guitar I was using for this video was the Squier Classic Vibe Telecaster. Completely stock. I've owned a lot of guitars and I can honestly say that this is the top of the list for me. Best $349 I ever spent. Best of luck and be sure to subscribe for future updates and reviews on "stuff". God bless. Joe Faraldi

[@VintageRandom]

@RandyRhoadsFan96 Hey man. All you need to do is go to the Digitech website and click on the RP500 link. Then at the bottom right of the page is a "downloads" link. You need to download NetUpdater (either Windows or Mac). Then when you run it, it will walk you through the update. Merry Christmas!

[@joemama-kx6rk]

Great video!

[@ericklabra9875]

Can you explain how to download the free looper? please!

[@diomedesibalbalosa4863]

Does anyone know how to change the effect loaded in each of the 5 parameters when in pedalboard mode? Say the kind of distortion i can have. Thanks!

[@bryciferal]

You'll need to get down there with your hands and change the parameter using the two arrows and knobs. The best way to avoid using your hands is to create a separate bank of presets, with all the same parameters, except for the one you want to be different. The X-Edit software can be helpful with this.

[@MrVision14]

What do you do to get the looper in your stomp box? I just got one.

[@VintageRandom]

Hi Christopher. You simply go to the Digitech website and download the update for the RP500. Thanks!

[@philvanduyn]

Try the factory reset. Pg 27 of the manual. Should reset everything.

[@Rickinch21]

@ImageRiver I love that series of Squier Teles! I'm a telecaster user as well ! I have an MIM Standard Tele, looking forward to get some seymour duncans on it, and maybe change the stock bridge saddles which aren't that great, but overall guitar that can last forever, real telecaster tone in it ^^! A little bit expensive though, for the features..it should come with noiseless pickups AT LEAST! I bought mine on ebay at 300$ and its in pristine condition! haha :D Peace.

[@ShredWithMe]

The clean tones for mine is awesome! Really, really love it. However the distortion or OD tones are horrible. I've tried messing with the mids and EQ..whatever it's called...The pedal recently stopped working completely. No wah, whammy or volume controls. I know how i did it too...i was tripping, like literally tripping over some cables and to save my Charvel i put my foot down on the chorus and distortion button...it then blinked on the screen and now i only get the sound and effectf

[@GeneCarrasca]

Can you still connect a separate looper to it?

[@santiagorivero8608]

Amigo como la actualizo, me da miedo estropearla

[@matiasgermanjuarez5308]

hi i'm from Argentina and I want to know how I can put in my rp 500 looper because nose como put

[@VintageRandom]

matias german juarez Hello. I think you're asking about how to install the update. You just have to go to the Digitech website and download the latest version. Thanks!

[@matiasgermanjuarez5308]

yes yes yes but I do it with usb cable?

[@valterbarberini]

matias german juarez Yes, but I had a bad luck, after updated my volume pedal stop working for some reason...

[@VintageRandom]

Hey sorry it took long to get back. All you do is download NetUpdater from the Digitech website and it will walk you through the firmware update, Good luck!

[@dccowboys1]

@XxicruffesionalxX Yeah I have had this pedal for a while now. So I have figured out every trick of the trade. This pedal is amazing! I have tone set for Gilmour on Dark Side, The Wall, some Hendrix tone nailed down to perfection. Some perfect Sabbath tone. Loops for days. This is def a must buy for anyone who doesnt have it.

[@tunogmalaya580]

hey joe! Good day! can you please help me to get that looper im having problems to get one., i bought my digitech a year ago and now i badly needed the looper because i play solo. thanks!

[@VintageRandom]

Hey there. Did you do the latest firmware update?

[@tunogmalaya580]

Joe Faraldi yes just got it yesterday!your vid help me a lot thanks!

[@VintageRandom]

Inky Simon Awesome! Very glad it helped! Please feel free to subscribe. Thanks man.

[@guyguitary]

Hi Is it possible to use it as pedal control? MIDI

[@SnatchValve]

I am trying to find that out for myself. There are apps on the iPad I am using to turn my guitar into midi and it is working. I will be trying to see if I can use the iPad as a pedal in my pedalboard. As far as turning it straight to midi is something I do not have the capability of doing due to lack of tech. But like I said there are apps on the iPad for midi.

[@RATREVI]

I have no idea how to use this pedal

[@VintageRandom]

Aah you've stumbled upon one of the key characteristics of looping. Remember, your overall loop is only as long as your first phrase. For example, let's say I play (in 4/4) a phrase for one measure. Then I play something over that where it goes a measure and a half. I'm going to be repeating that new phrase in the middle of the first measure. The RP will only give you enough new recording space for the length of the first phrase. Others may be different but that's how the RP works. Thx!

[@warisahmedyousufi]

@dccowboys1 no dude u shud use your looper on preset mode, where u can save 5 of ur presets in a bank..den after looping from on of ur preset u can choose any of the 5 while the looper is playing...

[@VintageRandom]

@jakebrickhouse Digitech is pretty good at posting this stuff but the forums are better sometimes. Glad it's working for you!

[@AlanGCarvajal]

Well I'm here 10 years later just to find out that in fact I can get a looper in this baby. Hope I can find the update!

[@rafaeldemoraessantos7773]

it´s an official update, get directly from digitech site.

[@ovlimber]

Where exactly can you find this update?

[@VintageRandom]

Great question. No it doesn't. Once it's installed, you can access the looper from the RP500 switches.

[@VintageRandom]

@JerkyTreat No sweat!

[@valterbarberini]

You can not compare the sound of digitech with line6. I tried and the quality of the digitech is superior.

[@VintageRandom]

+Valter Barberini I agree. I've had a lot of Line 6 stuff and for some applications, they're great. I feel overall, Digitech is better.

[@ShredWithMe]

thanks man

[@tomaszilinskas1425]

I am holding up button for fkn 1 min. nothing happens

[@VintageRandom]

Hey bud. Been a long time since I've had this unit. I've spoken to the people at Harman/Digitech in the past and they're actually great at customer service. Definiteky give them a call. It's probably something small. Let me know how you make out.

[@tomaszilinskas1425]

Yeah. Weel after I comented I realised that I need to install that update. Sory for bothering ya'll.

[@delacruzneili]

Hello, does this allow you to store those loops you created? Thanks for the demo man. Very nice progressions there!

[@Topher19801413]

press and hold the up button.

[@robertoaliaga2058]

podria hacerlo en español xfabor saludos de bolivia