Automating 12,300 Aluminum /min is INSANE - Satisfactory 1.0

[@ImKibitz]

New world save available to Patrons ➤ www.patreon.com/imkibitz

[@graydonpivec6728]

Why do you need so much aluminum?

[@mnmsaregood1]

@@graydonpivec6728 why not

[@aidanburns675]

The void is always calling...

[@atlas3104]

28:09 Prob one of the funniest things ive seen in satisfactory series

[@Regi572]

The comedic timing on that was something special lmao

[@TomFoolery-e]

"The voids call is strong today" best quote ever 🤣

[@AustrianDeathMachine9]

Just in time kibs, I was getting bored

[@StijnVanLishout]

Same

[@K_Katayama]

Real

[@Finn77448]

Same

[@Bob1324]

true i was so happy when i saw the Notifikation lol

[@squa_81]

you ceetainly didn't watch Dosh's latest run of Factorio : space age that just released

[@eysoare5801]

28:09 had me dying, just the silence and staring at the truck fall

[@Karagoth444]

4:23 I have some bad news Kibz. You need to buffer the station with dual outputs b/c of the traing loading animation output pause. Even with a 1200p/m output, it will never reach that throughput over time if the belt is not fed 100% of the time. It MAY work for 600p/m stations, depending on how often the station is working. Need to remember the loading action is slooooow.

[@pitrex111]

I am screaming internally at this. The beltwork looks horrendeus now and this won't even help. Not only this but I'm also pretty sure that the waterworks is not done properly and will clog somewhere in the future

[@johonn]

Yes exactly. Whenever I make train stations, I always put the output buffers right at the station. It can be underneath if you want to preserve aesthetics, but regardless you need two belts going in so that they can overcome the lost time for the unloading animation. The same goes for the input at the source - also needs a double-belted buffer storage container.

[@nicolasmurphy8412]

I saw a post about how to make sure your pipes prioritize certain inputs after battling with the excess water with aluminunumumum for hours and hours. Basically you want to set up your pipe junction not flat where the four inputs are going forward back left right. You want it where it is oriented where one is facing straight up and the other is facing straight down. It will always prioritize the down input so if you loop the excess water from the aluminum scrap machine back to the bottom input of the junction that goes into the Sloppy alumina machine it will always prioritize that input and therefore the aluminum scrap water will always get used. Absolute game changer for recipes that have excess water. No more needing to find a nearby limestone deposit sink the water

[@staris3712]

Another option Kibitz could have done would be to have the overclocked production in the middle so the valves are pointing in instead of to one side of the trio of .Refineries.

[@suicideskater1]

@@staris3712 Or not have valves at all. Pipes will self balance through backflow, because one machine can't take more than it needs, so the water will go to the other pipe and continue to the next machine.

[@GuagoFruit]

NO KIBITZ! It's 2am and I have a meeting at 9. You can't do this to me T_T

[@JustKidding158]

It’s 21:39 for me :)

[@Darkicec]

18 39 😊

[@m0llux]

I'm always anazed at other people being amazed that there are such things as time zones!

[@daviddinh9247]

@@m0lluxtrue unfortunately none here

[@Zenqiii]

That's 7 hours bro what are you crying for

[@cork1576]

28:21 "When you take small numbers and times it by big numbers, they become big numbers" - Mr. Kibs, 2024 Im getting that framed for my office.

[@philosopherofinfinite4558]

Thanks for the thanksgiving release.

[@BillyWilson-sg3du]

You should add drones flying over the void, they don't even have to have a purpose it'd look cool though

[@togares]

evening saved

[@mjrgdasb]

Happy thanksgiving kibz I love your videos

[@lightning_lord2137]

20:48 Finally something to prove my point about having clean hypertubes from point A to point B, no werid gaps or cannons

[@karadan100]

I don't think you're entirely sane lol. This is beyond crazy - something i'd never have the imagination and patience to make. Bravo.

[@Gaming1Doge]

26:00 Kibitz, you just got the sickest shot of your base when you went through it there, it was game trailer worthy, I'm telling you

[@eddiebriggs8813]

How dare KZbin hide this from me for 4 minutes!

[@pohodovejrybar5918]

4:02 men see this, men happy

[@NominalJoe]

Thanks for affirming my choice of the electrode recipe, I've been debating that for a while.

[@nejohnsonbooks]

Wait I'm confused. I thought the reason for connecting a storage bin to trains is because belts don't flow in or out of the train-station when its loading and unloading a train, so to catch up for that lag in time you have the bins connect to both ports of the station and then just have one belt out of the storage. If you just have a single belt in and out (or two in and out like you do in your other video at the mine) then the storage just empties at the same rate it fills and doesn't do anything. Am I missing something?

[@Fenikkusu14]

I really hope they fix that floor hole bug soon, I spent probably about 5 hours on both my aluminum and turbofuel builds trying to figure out wtf was going on

[@0o0ification]

3:22 Dude builds a base so big, that he needs Power Towers to get lines that far 😈

[@mechtechpotato4249]

Now we know who designed all those random bottomless shafts in Star Wars, it was kibz.

[@Esifex]

Hypertube room looks like something Blue Man Group would play on with wooden spoons

[@АлександрЛарионов-е4у]

this falling truck was so random XD

[@Franklin_Johanessan]

Time for some alumininimum ❤

[@dansamarco1610]

Seeing the craziness of vanilla load balancers really makes me appreciate the modular load balancers mod that much more (although imo the vanilla way looks cool, it can get out of hand very easily)

[@Faesharlyn]

Gosh I love this game so much, and you are so much fun to watch. Thanks so much for sharing what you do with us! You mentioned something a few videos back about how ficsit doesn't really care about their workers and sees them as property... i think the "miner" really is property, a digital consciousness plugged in to the suit... which is why the seamless respawn is possible, the base just prints a new avatar suit as necessary, pops the saved consciousness file in and resets the incident counter. What's left at the expiration site is some scrap metal from the old suit, ready to reclaim lol It also explains why ADA can hear the song, AI limiter or no (Unless this is common knowledge and I'm slow to the party lol)

[@atlas3104]

Love the idea of using more tubes! As useful as they are i was never a fan of launcher tubes cus of how ridiculous they look! Always loved properly using tubes around the base, specially since the speed cap is pretty much infinite

[@bloodyto91]

Absolute madman. I've always though Kibitz is right on the border between madness and genius.

[@ShiroArctic]

28:09 The intrusive thoughts won.

[@matthewdebeer8453]

28:10 Should have put some AI limiters in those self-driving trucks. That one cooked a little too much

[@willyg1776]

ya, didn't know if the floor hole pipe bug was still in the game, so I decided to only use them cosmetically by having the pipes go through the floors and putting the floor holes over top so that issue didn't happen. Positioning can be weird with the holes sometimes, so route the pipes through the floor hole first. Then, once you have the correct location for the holes, delete the pipes and reroute them directly together. Fixes both problems with minimal extra effort. Can't wait for the straight pipes to be added in next update

[@Und-ex]

Wake up babe kibitz just uploaded

[@TheHondor64]

if you want some more tickets. can easily send those ingots into constructors to make casings 90 ingots = 11790/min. 60 casing (using 90 ingots) = 23580 a min. :)

[@CalciumBrick]

I love satisfactory, but it takes way too much time, that’s why I love watching kibs. He plays the games so I don’t have to

[@Md936S]

Lesson to be learned: never use floor holes to attach pipes. Just line up the pipes and add in the holes as decor.

[@hiddensmith1]

4:10 Im am a cheff and my specialty is spagetti. This belt spagetti is 7/10

[@nutellasoos2298]

@ImKibitz 38:25 Thats why im always pretending to use floor holes,so build the pipe and then add the floor hole afterwards so it looks good and doesnt remove the head lift

[@staris3712]

Might as well have the resin turned into Plastic and Rubber with the Residual recipes, all it takes is the resin and water which you could use the water use saved from alumina production.

[@novawhite304]

Getting to the end of the video, I understand why uploading was a bit later than usual😅

[@E_200daloudlad]

I love satisfactory videos

[@Mr3ppozz]

Finally time for the A LU MI NI UM!! aluminumunumnumnum is just wrong! XD This is gonna be pure chaos and we love it

[@xenodestroyer4803]

Kibitz doing what I would have done if I was train lining all the bauxite just for giggles.

[@Skib-x8l]

You dont know how happy iam finiallly seeing youve uploaded

[@Bob1324]

the elymenimenemeim a battel Kibitz won and we will cheer for This Victory

[@IanTheWonderDog]

9:28 All Hail T H E V O I D .

[@Sinrise]

Consistently, your spaghetti looks way better than my best attempts to not do spaghetti.

[@cjsquad8316]

If you dont mind me asking why do you need SO MUCH aluminum?? Like i get the basic amount of this is tooooooooooo much, and that is hard to get

[@herpderp264]

Because he is insane and does nothing small

[@noremHUN]

28:06 Truck left the chat. XD

[@DustinM.Curtis]

Happy Thanksgiving!

[@14768]

The issue with floor holes is there are 3 snapping points. 2 near the floor on each side and one in the middle. Make sure you snap to the middle from both sides.

[@gnhatch]

just finished a Giant Iron factory that makes 6240 Ingots (92 pure refineries) and i cant imagine doing something as complex as that much alum.

[@General_Madness]

It’s always a good day when kibz posts a satisfactory video (pun intended)

[@JimBob-m6b]

This was the top of my recommended

[@TimGabriel-o1v]

i was wondering when the new video will show up, very nice

[@odeylo]

he is aluminunining the world

[@TheGoldDukeMusic]

the void is hungry

[@redevladar]

you can use the excess water and resin and convert it into rubber :)

[@johndoe-un9uq]

Finally my favorite part of the day

[@isothermicotter]

Happy Thanksgiving everyone!

[@aeronark4196]

Hey Kib! I'm planning and slowly building my megafactory, and i ran into this one comment. They explain how belts have a hard time maintaining their maximum throughput when there are a lot of objects in the world. Basically miners are mining 1200 items/min but due to the lag, the mk6 belt can't handle all of those items and in reality, it's speed is a lot lower than 1200 items/min. Have you encountered anything like this in your past playthroughs?

[@nickel2346]

looking good kibs, BUT, are you ready for fixmas to begin. i know i am.

[@gitakubova4792]

youre actualy crazy but youre good at it i woud quit when i see it My word is worse but youre soo good at it and kibtzi s dying inside

[@MMMMM999999999]

I was gonna send a comment saying I'm surprised he uploaded on Thanksgiving, but then I remembered he's Canadian...

[@qshfnx_]

Going to sleep after a long session of gaming, seing kibs post a video - who cares bout sleep

[@DavK9]

FINALLY. I was starting to experience withdrawal ☠️

[@The_Redstone_Robot]

You could have put hypertube enterances on both sides to make it two way

[@OniZai]

Huh, I guess I should avoid the pipe floor hole as I got the same problem for my coal power plants.

[@cluster7790]

28:10 Kibs why you have sacrifice the truck to the voids we all know it you behind that

[@devoidemralek7918]

tier 6 belts, feeds 6 refineries, but water, u can fuel 3 with water, and run 5 waste, into 3 refineries, an 3 back into 3, and underclock 1, doing so, the system runs in modules of 8, an ud need 3 6 lines for 24 machines

[@jacobhelyar937]

perfect timing for dinner

[@keno_9094]

thanks kibs.

[@MrTwisterOfficiaI]

Perfect timing

[@imaginesam]

whatching this as I'm playing satisfactory :)

[@mediumwarrior67]

Hi Kibitzzz

[@TheRealASN]

Kibz

[@SilverPhoenix020]

"Just kidding I got work"😅😂😂

[@SapphicNeko]

Do the maths with instant scrap alt recipie in the blender :)

[@miloz5558]

Im working on producing 100 ballistic missles/m and aluminum processing is driving me crazy dude

[@markhoddell1055]

You should do the next space elevator part

[@chompkin116]

FIRST 7 MINUTES AFTER THIS WAS POSTED LETS GOOOOOOOOO

[@SpilledPine8478]

W kibitz

[@lightning_lord2137]

25:51 Using clean, straight hypertubes would be easier tho

[@LukeWonderlich-un5ng]

HAPPY TURKEY DAY!!! 🦃

[@TvFilthyFank]

they should make an aluminum plate Alternate, since they have an a aluminum rod alternate

[@Goobashoobaguy]

👇under 1 hour gang

[@MattiCore]

Yesterday I created everything to pump water in my sky factory for 76 coal generators which use 1200 compacted coal/min from 20 assemblers - 12,6GW of power 😂😎🤘🏻

[@sonnyanderson2766]

All these conveyor issues can easily be solved with counting smart splitters or am I tripping. If that’s not already a mod it should be

[@NotSoGoodGamer69]

a mess of belts can always look intentional if you decorate them.

[@LegendaryDimitri]

Isn't the recipe with the mixer more efficient and easier?

[@volcano1979]

question: does the clock or the Fountain of Lions show the time exactly compared to the mobile phone? Not as in minutes exactly, but if it's 12 o'clock, if the fountain also shows 12 o'clock. I know bad idea

[@PrefabQuasar]

kibz, if youre only putting 720 into a buffer, and taking a full 720 out, it will never actually build up the buffer..

[@kenneth2519]

Omg having to redo all of this after you've basically finished the set up is painful

[@rupert7565]

serious question: Do you know the song of Albert Hammond - I'm a train. I think you might just like it.

[@JWAskew]

omg ive waited so longggg

[@Sinrise]

12,3000 Aluminumamin

[@quackyus]

Oh word

[@Whisper555]

I went with 3 x 20 smelters to serve 3 over-clocked refineries I cheated and used MK6 belts 🤣

[@astromarwar4279]

i dont have time to watch all this video, but how did you deal with water waste? did you loop it back to the system or do something else? i made simmilar factory that makes 6k casing and my water waste is looped back into system and it sometimes has too much or too less water, but i did calculate it and it should be working, every pipe has 600 water/min and going to the machines again that also consume 600water/min, but sometimes machine has 95-99%

[@tuijavirtanen4396]

Almost a week deprived of high quality Kibz SF content was so sad