INCREDIBLE Buck Ranger Order! - [ How to Customize a 112 ]

[@kyle_noseworthy]

Thank you all for your support! You're fantastic! SHOP AT kylenoseworthy.com/shop for my available stock. Email me at [e-mail] for custom inquiries. [Note: I still get all emails sent to my old address at [e-mail]. The new email is a company domain that's easier to spell than the old one, but all mail is auto-forwarded into one inbox.]

[@mikeym1875]

Kyle, I’ve emailed you a few times checking on a custom request. It’s been about 2 months since I heard from you. I fear my emails are going to your spam folder. I hope all is well!

[@brianabbott6369]

Each and every one have their own distinct persona . Was thinking in the early stage that the pine cone was going to be a jaw dropper . I should of known, its a 4 way tie. They are all jaw droppers. Perfect my friend Perfect.

[@mutstumbo]

What great craftsmanship you do on all the knives. All of them are beautiful.

[@mialumsymclaxni4736]

The "jasper" with nickel was my favorite of these absolutely phenomenal builds. Keep up the fantastic work, sir!

[@PabloEscobar-i1o]

The jasper buck is beutiful absolutely stunning 🤩 they are all beautiful but the jasper or the bison are my favourites

[@jrod8009]

Very nice work Brother, the owner will be proud!

[@bert2530]

That droppoint with the bison…. It’s incredible, what a beauty.

[@robertmceuen3630]

That one with anvil insert is beautiful.

[@wazzeradk9398]

The 112 was meant to have a drop point blade! I have plenty with the clip but once I got my first drop point, that was it! Very nice work on all of them Kyle!

[@DaveMar-w6r]

I like all of them! Great idea with quad cinematography.

[@iansorenson4630]

Beautiful job, love the pine cone, then the buffalo.👍

[@Dreweldeenknives]

The horn is the most stunning absolutely . Pine number two for me . All very well done

[@Xxxero42]

oh my god. those are beautiful. I liked the first one, the black and red.

[@famasmaster2000]

Oh wow, hard to pick a favorite, they are all gorgeous !! Simply put, BEAUTIFUL!!!

[@davidtoastivine707]

I think the pine then the anvil but all four are so good it’s very hard to pick. Your camera work is getting as sharp as your knives, very classy and I like the fading and ghosting effect

[@ronthompson2366]

Absolutely beautiful... all four.

[@ralphiewigs2208]

Fabulous work! It's a toss-up between the Buffalo horn and the pine cone...edge to horn.

[@happyhippo2767]

You really got that Jasper one looking nice.

[@terryw.milburn8565]

Awesome Custom Work Kyle. I Love The Pine Cone & Bison, Thanks For Sharing ! ATB T God Bless

[@seanrobinson6407]

Beautiful. I cant decide. Want them all. The horn is the best in my opinion, but I would want thepincone to edc because it is so cool.

[@davidjensen4796]

I can't pick one because I like them all they all look so smart I'm cool a pleasure to the eye thumbs up

[@markkinna903]

The bison horn is beautiful, but I have to say the pinecone scales really jumped out at me!!

[@stevenchisholm2364]

Beautiful!!!..only word needed!!!!!

[@tobinlakeguideservices]

I really find the red pine cone very nice. The horn is beautiful, I agree

[@rossbrown9768]

That pinecone is a really beautiful

[@shannonlenz1098]

They were all very nice but I liked the pine cone one the most. Beautiful work as always

[@charliepeltier4038]

The pinecone handle is definitely my favorite

[@donc5220]

Wicked Man!!! Been Pondering one of these from you.. Very Cool beans Indeed.

[@andrewzach1921]

Those are some really nice looking knives there Kyle. I would say the pine cone is my favourite.

[@RaulBarbosa-k7d]

Amazing workmanship, congratulations! I’m a big fan of Buck Knives. Always carry one with me. Theology 👏🏽👍🏽👊🏽🙏🏽

[@paullambert4445]

I like the pine cone scales the best. 🔪🎸

[@typicalthrill]

Beautiful! Love that bison horn one! I don't know that I would have known it was a horn if you didn't tell me, but the pattern is really cool. Nice work!

[@natewilder1868]

How about that anvil pin! That was a cool touch, but they were all amazingly done.

[@johnhunt8807]

I liked all of them but I liked the anvil one most

[@Pollyanna-cc3et]

Scallop, fish scale, and engine turning... Pinecone 😁🙏

[@hanksbud2544]

Anvil pin buck is my favorite.

[@marklaramie7393]

Very very nice, beautiful work, and there's no way I could pick a favorite

[@RookieLock]

Beautiful work as always Kyle.. If I had to pick just one I'd have a really hard time trying to decide, lol

[@tedhart7708]

All beautiful!

[@Chevyv8man1]

Beautiful knives Kyle. My favorite is between the pine cone and the blood wood with the anvil. They are all great. You do some great work. Later

[@johnconklin5180]

Hey Kyle! The Tuckamore arrived yesterday and it’s a beauty! Thank you!

[@kyle_noseworthy]

Wonderful!

[@Mark-ew5jm]

What magnificent knives….a true testimony to your skills…I think my favourite is the Bison and brass…..BUT, really how can you choose….they are all my favourite.

[@ErikWidlund]

Beautiful knives!

[@SuperSmoke1967]

Amazing once again. My choice would be the Buffalo horn , Great work

[@WildBORProductions]

Nice work as always Kyle!

[@scottstapleton2544]

Really great stuff. Nice, Kyle. True craftsmanship.

[@renepicard8113]

All look great can't make the decision witch one is best

[@mulepowerforge]

Of these I like the bison horn but personally I think green canvas or burlap micarta looks the best with brass.

[@Dreweldeenknives]

Awesome work man

[@terrillschneider3778]

Absolutely wonderful work Kyle God bless

[@shooterm2534]

amazing work as always

[@townieoutdoors8121]

I like the nickel bolster and red scale

[@mikebike8852]

Absolutely beautiful workmanship. And thank you for being an example of Romans 1:16

[@wyattkesler7805]

The pinecone for sure!

[@Woodswalker1965]

I’m always impressed by your skill level👊🔪

[@Woodswalker1965]

The Buffalo horn is🔥

[@richardabbott5601]

Thank you

[@PerfectBlade-zt9rz]

Such beautiful work!! What material is the black wheel your using at the end to polish?

[@darrenbrown9096]

I liked the pine cone

[@hiredgun7996]

Jasper plus nickel silver bolster and drop point = my favorite. I’m curious how you worked out the lock back on the bare heads when it seemed you had covered each side with scale material. Inquiring minds want to know! 😊. Great work Kyle.

[@rossleslie2498]

I really like the pinecone handle material! Is that a material you’ll be offering?

[@williammrdeza9445]

Outstanding work, Kyle! These all turned out amazing. I think my favorite is the Jasper handle, though I agree that the I prefer the brass bolsters over the nickel. The pine cone scales are wild--what a unique look to those. Honestly, each of these knives are gorgeous in their own right and picking just one is a toss up for me. If one was interested in having you make a custom Buck (I'm thinking 110), what is the process to get that started? I don't see reference to this type of custom work on your website. Thanks for sharing this beautiful work with us Kyle. I am sure your client will be extremely happy with the results.

[@davidbeau6715]

How do you take the bolster off and how do you sand the lock bar groove? Very nice work

[@63rdm97]

Kyle, I'm really interested in the high speed buffing pads you are using on your polisher. They look like they remove material really well and polish at the same time. I use different rouges but struggle with the pads. That process looks like it saves a great deal of time. The one at 8:29 in your video, can you let me know where to get them? Thanks, great work.

[@kyle_noseworthy]

I get all of my buffing wheels from Caswell Canada! Canton flannel, spiral sewn, burlap, etc

[@gzavnet]

Awesome 👍

[@billhatcher2984]

I like the blood wood the best then the buffalo horn I think the buffalo would look better with the nickel bolsters but they all look better than they did that's the first time I have seen anyone take the rear bolsters off

[@clintonroushff7068]

Interesting, a Buck without the rear bolster. If you're not careful you'll improve on perfection! Take care and GOD bless

[@xman870096]

It's impossible for me to say which I like best, as I would be proud to own any of them!!! Quick question, is it possible to replace a blade on a 110???

[@happyhippo4664]

Hey! Those will be mine. Nice to see the work in progress. Are you doing the silver one too? Those turned out great. I thought the blood wood one would be too plain, but it is great. Not sure which I like best. Probably pine cone, bloodwood, buffalo, and jasper, in that order.

[@kwipboy]

Pine cone my fav, but wish it was brass...

[@MASI_forging]

Beautiful 😍😍

[@joshuatichota5046]

Do you also do hidden tang knives?

[@gordiejones2039]

Kyle, question have you done any automatic bucks?

[@happyhippo2767]

I agree that brass can look nice but the reason I gravitate toward nickel is because brass tarnishes so easily.

[@brentelliott4764]

I messaged buck to rehandle my blade HQ exclusive 112. How much would you charge to add elk or stag scales?

[@Dreweldeenknives]

I mailed you some knives to customize scales and blade finish ! Case sj and a gec fixed blade

[@kyle_noseworthy]

great!

[@richardabbott5601]

I've been trying to find out if you can order a new buck knife with no scales. They will not respond. I was wondering if you know how

[@kyle_noseworthy]

I don't think this is possible. I remove the scales myself. Pretty simple process!

[@thomreynolds1318]

Pinecone!!!

[@wrecksricardus4911]

2nd .... I'm getting slow .... forget that .... I'm 3rd .... there's at least two greater super fans out there ... who woulda thunk it

[@kyle_noseworthy]

You're a busy man!

[@robertmceuen3630]

You want some wood that really pops? Get some Bocote.

[@HerbertWingfield]

1st like the old days...

[@kyle_noseworthy]

Thank you, my friend!

[@HerbertWingfield]

Cold? When you really had to man up by melting your motorcycle tires out of the ice in your shop/shed.

[@kyle_noseworthy]

You've been around for the long haul. Since the 'good old days', of which I DO NOT wish to return! I'm currently editing at my shop with my shoes off so my feet don't sweat. Times have changed, my friend.

[@HerbertWingfield]

@@kyle_noseworthy Rocky trained in Siberia for a reason...