INEXPENSIVE POTTERY WHEEL REVIEW | Unboxing a VEVOR Budget-Friendly Pottery Wheel HD 1080p

[@themousehousepottery2724]

Sarah your looking very well for 55! great videos and this wheel is a complete bargain to get into pottery without a huge outlay

[@SarahWaltonPottery]

Awww Thank you sooooo much!! I'll be 56 in March😬 🤭!! I apologize for my slow reply to your comment, I took a little time off over the holiday's as I had family staying with me and I'm just getting back into the swing of things!!! totally agree about the wheel and the noise that i had experienced was the packet of trimming tools that I thought they had not shipped were stuck up under the pulley system...noise is now gone..I use the wheel as my permanent trimming wheel! It works brilliantly!

[@divinewrath3142]

I got the one step up from this, 14inch I think and adjustable legs (still needed to put it on 2x4s. It was listed at 200, but discounted to 160 something. I just started lessons 6 weeks ago so it is perfect for me! I really like it so far. It is not the highest quality, but it works well. I equate it to a car. If you buy the base model you don't get heated leather seats. My tray leaks at the joints, I just pop some clay on it when I am going to throw and clean it off when I clean the tray out.

[@SarahWaltonPottery]

Oh Amazing!! I love this testimonial, i'm sure it will help someone make the plunge. I love my Vevor wheel, I use it to trim cups and smaller things. I typically throw on my Brent, but this wheel is a staple in my studio. When I started my pottery journey there wasn't an option like this, you had to go all in (a Bentley in comparison 🤭) I'm pleased that you are figuring it out and finding work arounds! Cheers!

[@bunty321j]

I looked this wheel up for the UK at only £110 I thought it would be perfect for doing Demos at markets and for trimming pots but sadly the postage cost was £440 so not the bargain I initially thought 😢

[@audreyb1155]

I ordered the 14in wheel head Saturday. I haven't gotten it yet but im so excited for it to arrive and give it a try! I love that you posted this video!

[@SarahWaltonPottery]

Hi Audrey! Thank you, I'm so glad that you enjoyed this video! You are going to just LOVE having a wheel at home!!

[@ginafeddersen8200]

Thank you Sarah for sharing this video, 🩷😊🩷 thoroughly enjoyed your thoughts thru the process! I bought one 3 years ago for spinning my art with the intention of using it for pottery. My husband made a wood plate stand so it fit and could be raised over the top of the splash bucket. I covered everything with plastic to protect from the paint so I could keep it clean. I took a Ceramic course 2 years ago, but it was not so easy on the wheel for me. Now I am defintely into potting and I have yet to try using Clay as I handbuild everything and have a great slab roller. But after seeing you demonstrate it, I feel ready to try it out. Love all your videos Sarah, you are so funny and honest. 🩷😊🩷

[@SarahWaltonPottery]

Hi Gina! Thank you sooo very much for you continued support and I'm so happy you enjoy my videos, its always encouraging to hear how I impact peoples process. You bring up some great ideas how other art forms can benefit from a wheel in their studio. It's also great to hear that you've had one for 3 years! Thanks again for watching! 🥰

[@dennismanning3964]

thanks for creating, inspiring and entertain us.

[@SarahWaltonPottery]

🥰🥰🥰

[@johnheishman6434]

I had a little box of tools up underneath mine by the pulley

[@SarahWaltonPottery]

Hi John! Yep, I found them! I had a few people mention that they had the same or similar wheel and that the noise was not normal and that something must have been rubbing. Well, guess what? The box of tools were jammed up by the pulley. I didn't even think to look up there. They were quite snug in there too, got them out and now the wheel is much quieter. Is it just me or is that a weird spot to put them? Anyhoo, the next video when I'm using the wheel I plan on sharing this titbit of info. Thnaks for sharing!!

[@SoulHavenPottery-gt2gf]

Nice review/unboxing :). I have my Brent wheel elevated and when I do the pulls I always stand up. It's been better for my back! Thanks for the video! And congrats on getting the review!! Good job...ever expanding!

[@SarahWaltonPottery]

Thanks Star!! Now that I tried it out, I'm probably going to get some cinder blocks and prop up my Brent too. Since I've been home I'm not standing as much as I should, I used to put int 12-15k steps every day, so I need to figure out something and propping up my wheel might just be the fix I'm looking for! Psst, I've got my kiln and filmed my first fire...a test fire (empty) but I christen it...name reveal will be coming soon!

[@SoulHavenPottery-gt2gf]

@@SarahWaltonPottery 💗love it!! Looking forward to it

[@Maryzlem]

I got one of these in hot pink (you would love it). It's a nice little wheel for the price & for throwing small. I use mine on a work table. A pretty good if you don't feel like messing the big wheel 😊

[@SarahWaltonPottery]

Ohhh...yes PINK would have been perfect for me! lol...is it that obvious 🤭

[@WhiteStoneCottagePottery]

Thanks! Your comments are really helpful! I’d like to have a second wheel and this would be perfect!

[@SarahWaltonPottery]

Its a great little wheel. Problem solved with the noise too...tool pack was stuck under the pulley. SO if you get one, be sure to look up under the wheel!

[@eprohoda]

Hiya!. Sarah. amazing unboxing- 💫

[@SarahWaltonPottery]

Thank you 🤗

[@sashacali2425]

I bought the 14 inch wheel head, mine did come with the Japanese trim set, standard trim set as well as an apron very happy about it❤

[@SarahWaltonPottery]

Oh I love that you shared this! I think it will really help out some people make a decision. Is yours as loud as mine?

[@sashacali2425]

@@SarahWaltonPottery thanks so much I love your content as for the noise, not really. I think a lot of that has to do with you putting it on the table (mine is...I know...on the floor; I do yoga)🤣

[@janlewis9099]

Such an exciting kiln unloading 😂😂. Love the blue bowl with textured turquoise and blue rutile.....I don't think you should put gold lustre on as then it can't go in the microwave. Thanks for sharing those amazing combinations sooo much to try out. Happy Christmas!!!!🎄🎁

[@SarahWaltonPottery]

Thank you sooo much Jane!! At first when I saw the bowl I thought it needed something more but with all the feedback from you all I agree that it’s better to leave it as it is! 🤭 Merry Christmas to you and your fam! 🥂

[@readingwithmrsleaf]

Thank you for this! I’m in my last week of class right now and the next is not until Feb. :( This will be perfect for in between!

[@SarahWaltonPottery]

Amazing! I'm so glad I was able to help!!

[@estherljonesdotcomartist5505]

So I got the 14" head back in early summer. I got the one that has adjustable legs, but I ended up removing those completely because they made the wheel unsteady. It also came with only one half of the splash pan! They sent another. There's more to the story, but eventually I was able to start throwing on it, and I've been using it since then. Never have tried anything over about three pounds on it. I do use it standing up and have mine up on cinder blocks.

[@SarahWaltonPottery]

Thank you for this! Its great information for others to contemplate! psst...I got to the bottom of the noise(s)...my trimming tools were tucked snuggly up under the pulley system...weird place for them, I guess they shuffled around during shipping 😉

[@nadiamcgaughy8848]

Hi Sara, I think the noise is coming from the splash pan touching the wheel. If you adjust the pan it might stop making that noise. My dies that if I don’t mount the pan correctly. ❤

[@tegannottelling]

I have a similar wheel (I use something else now) I agree I think the splash pan is touching the wheel pivot. Was a great little beginner wheel.

[@SarahWaltonPottery]

Thanks Nadia! A few of you who've owned one of these or similar made this recommendation. Sooo, I had to get to the bottom of it, and I fixed the issue...Trimming Tools tucked under the pulley system makes for an awful noise(s). Problem solved! LOL! 🤭

[@saltrevino5292]

A few years ago Before I got into pottery a friend of mine had purchased a similar size wheel. Same problem it being real low to the ground. Anyway I cut some pvc pipe and fitted them to the height she licked. It worked perfectly.

[@SarahWaltonPottery]

What a great fix!! I may try that too! I still have it up on the table and use this wheel for trimming, so you have me thinking that pvc may be the way to go! Thx!!

[@katrinabenson7207]

I got the 14” to use with grinding pads. I drilled top to put pins in.

[@SarahWaltonPottery]

Thank you for sharing this as it will help people decide! 😉 I would've, if given the choice, gone with the 14" as well as it easily fits bat systems etc. But it has been a staple in my studio and I often use it as a trimming wheel if I don't have a lot of pots. In which case, I use my Brent C and my Giffin Grip. Thanks for watching!! Cheers!

[@cherylmichelleceramics]

I have a version of this wheel as it's all I could afford.m it's not bad but I want me a Brent 😂 I'm looking to buy one in the new year😊 thanks for another great video

[@SarahWaltonPottery]

Thank you!! And when you do get your Brent you will be sooo much better at throwing pots because of your beginner when! My fingers are crossed that you get your Brent soon!!

[@lilig6422]

Hi Sarah! Great video, thank you. Would you have an update on this wheel? Have you continued to use it and if so, how is it holding up? I'm just starting out and would like to practice at home so I'm currently looking for a good wheel. Thanks!

[@SarahWaltonPottery]

Hi Lili! This wheel is GREAT! For the price you can’t beat it!! I still use it, mostly for trimming, as I throw on my Brent C. If you have the money then splurge and buy the best your money can buy. If cost is an issue then these VEVOR wheels are fab. I discovered that the ‘noise’ was bcuz the tool pack was stuck under the wheel. Anyway, once I removed the package the sound was reduced immediately. Hope this helps. A few thousand $ vs a few hundred $. I always say invest what you can afford. VEVOR wasn’t available when I bought my Brent. Cheers!

[@manpotrait]

Dear amazing ❤

[@SarahWaltonPottery]

Thank you!

[@marcinszczur4130]

Thank you for your review I bought something with your code 👩‍💻

[@SarahWaltonPottery]

Thank you!! I hope you like it! 🥰

[@lynnenewell6812]

Ok good to know as a good price point!

[@themis3396]

Thank you

[@SarahWaltonPottery]

You are most welcome!

[@SarahWaltonPottery]

Hey, As always, I'm over in the chat! Don't be shy, say hello!!!

[@Uncle_Bucks_Forge]

It sounds like something is scraping. investigate under the table to see of there is a pully rubbing or may be wheel is rubbing the splash pan. I think I am going to order one then I'll have a spare for my daughter or granddaughter to use.

[@tegannottelling]

yep splash pan rubbing mine makes the same noise if I don't have it installed correctly, can be a bit hit and miss but great little beginner wheel.

[@SarahWaltonPottery]

Well, you are absolutely correct! something was rubbing...the missing Trimming Tools were tucked under the pulley!!! 😵‍💫...removed and now fixed! I will be sharing this when I do a video using the wheel...Thanks for the suggestions! and if you get one and are missing the tools...you know where to look! 😉

[@melaniebaker1930]

How do I get the pan off to clean it?????? I got this one for Christmas, well the 1 I got is a little bigger and has adjustable legs, but same brand and I can't for the life of me figure out how to get pan off!

[@SarahWaltonPottery]

@@melaniebaker1930 The pan “clip” (for lack of better word) has a tight fit so you need to pull using a fair bit of strength..same when trying to snap them back together😵‍💫🤭 I hope this helps!

[@melaniebaker1930]

@SarahWaltonPottery thank you so much!!!

[@toniesolomon]

hmm interesting it don't have pegs for u to put bats on tho can u use it for trimming or making small things on it and the jiggly clay on it when ur trying to shape that was iffy

[@SarahWaltonPottery]

Your right. but for a couple hundred $$$ rather then a few thousand $$ it’s perfect for a beginner, and it’s geared to the beginner. To be able to practice and see if it’s something you’re going to keep up with, it makes sense to me. Not perfect by any means and I don’t know how long it will last…but if you get the opportunity to practice everyday and start your side hustle and save for a top of the line wheel. It makes sense to me!

[@corryg6403]

I have been debating about buying one to aid with my hand-building, Just trimimg and slip application doubt I could throw rheumatoid arthritis and my hands look like a garden claw lol but ya never know

[@SarahWaltonPottery]

Hi Corry, sorry for the slow response 🥹...I've figured out the noise issue...trimming tools tucked under the pulley...so if you get one and think they didn't ship your tools...now you know. I've dedicated mine for trimming / finishing...wax, and it's been working brilliantly...psst... 'garden claws' could be challenging on the wheel 🤭 😉🥰

[@corryg6403]

@@SarahWaltonPottery Thank you I need a banding wheel too sooo.

[@momadhis]

Thank you for posting this review. How did you lift the last jug off the wheel ?

[@SarahWaltonPottery]

Hello!! I'm so glad you enjoyed this video! Btw, the noise that the wheel was giving in this video I discovered later was the trimming tool package was lodged under the pulley system, I have since removed the cardboard box, and the wheel sound so much better! With that said and to answer your question, I removed the jug but cutting it off the wheel with a cut off wire and lifting it onto a bat that I had next to the wheel. If you dry your hand thoroughly and with flat palms it is relatively easy to move and not distort the rim. Cheers!

[@lifeon137acreswithmikeanni5]

May I ask where you got your Brent wheel? I have a Vevor wheel and I don’t love it. But I have the lower version, the orange one, with a solid base, not legs.

[@SarahWaltonPottery]

Hi, I bought my Brent C wheel back in 2018 from Tuckers Pottery Supply. They carry a variety of top end wheels and will ship.

[@joanpcloutier5897]

I use mine (2 Yrs old) for trimming

[@SarahWaltonPottery]

Oh this is great! It will help people make a decision. I too have been using it for trimming, and really like it. I figured out the noise...the tool pack was tucked in behind the pulley, weird spot...Mystery solved! 🤭

[@liianabanana6320]

Is the pan hitting the wheel ?

[@SarahWaltonPottery]

Hi! I found the tool set was jammed under the pulley under the wheel! It’s sooo much better now! Whew!

[@AnnaH-f6t]

Have you found it has been tripping the breaker at all? I have bought one of these second hand and the breaker is just constantly tripping it out!

[@SarahWaltonPottery]

Hi! No I’ve not had that problem at all. Mind you I don’t use it for throwing, (I use my Brent for that) but I use it as my trimming wheel and has been working marvellously.

[@AnnaH-f6t]

@@SarahWaltonPottery ooh here’s a question - when you press the reset button on the breaker does it make a click sound? I ask because mine feels like it’s not doing anything when I press that button and that could be the reason it keeps tripping!

[@desertblbuesman]

Is it the breaker on the wheel tripping or the house breaker?

[@SarahWaltonPottery]

@@desertblbuesman No, not at all! That sounds very concerning! Maybe get an electrician to take a look at it! I know that comes at a financial cost but the alternative is more expensive in my mind. I haven’t had any problems with mine, except for the tool packet being stuck up under the pulley. Once I removed that, it been a great wheel to work on. I use it as my trimming wheel.

[@AnnaH-f6t]

@@desertblbuesmanit’s the built in breaker - I have since bought a new wheel which seems to be working fine - this has now been sitting redundant 😅

[@lynnenewell6812]

The noise would drive me crazy. Sorry have to have a very quiet wheel and would not be able to make plates … thanks though for showing us.

[@tegannottelling]

the splash pan isn't quite sitting right. if she adjusts it the noise isn't an issue. I have one and I found the same thing if I didn't have the splash pan installed correctly.

[@SarahWaltonPottery]

Hi Lynne! Soooo, I got to the bottom of the jarring noise(s)...the trimming tools were jammed up under the pulley, weird spot, and I would have never looked for them had I not heard that the noises were not normal. Since I've removed the package the loud noises are gone. Whew! 😅

[@SarahWaltonPottery]

I got to the bottom of the noise(s). the trimming tools were stuck under the pulley system. pulled them out and the noises disappeared. Thanks!!

[@lynnenewell6812]

@@SarahWaltonPottery lol that’s the sort of thing I do! I had a mini hand held vacuum clearer that I religiously washed the filter etc but it took me five years to discover another filter that should have been washed that was hidden under the base and a pokey tool for tight corners!

[@marcinszczur4130]

I bought this wheel - can you tell me if it's okay with the wheel not aligned horizontally?

[@SarahWaltonPottery]

Hi Marc...I'm not sure I understand you question exactly. Do you mean that the wheel head is not level? or the entire machine? if the wheel head is wobbly you will definitely have issues throwing on it. let me know more details.

[@marcinszczur4130]

@@SarahWaltonPottery Yes, the wheel has no level. I reported it to vevor but the technicians do not see the problem. I will talk to them further I have a video recorded. Can you take a look at it - I'll send message on Instagram because I can't post a link here.

[@artwithmrs.rodriguez6306]

Bought this same wheel last month because it had a lot of good reviews. Unfortunately, the wheel head is off-centered and wobbling. VEVOR's customer service is the worst I have ever encountered. Their website says 30-day no-hassle returns, but getting a new wheel has been the biggest hassle ever! Their first reply was for me to wait 3 weeks for a repair kit so that I could fix it myself. We've gone back and forth several times and each time they refuse to let me return the wheel - they keep upping the incentive to keep it. So far they're giving me $125 to keep it. Does anyone know how to fix it? I have no idea and now I'm stuck with an off-centered pottery wheel.

[@SarahWaltonPottery]

Ouch! Thats not very good! I'm glad you shared this as I'm certain that it will help someone make a decision. My wheel is working fine now. I found the 'trimming tools' (that I though were short shipped), up under the pulley of my wheel and that what was causing the terrible noise. Now that I have removed the packet, my wheel is working perfectly and I use it as my trimming wheel. I hope somehow you get this resolved!

[@artwithmrs.rodriguez6306]

@@SarahWaltonPottery I hope so too! Thanks for all the great videos! Maybe someday I'll be able to throw somewhat decently! I soooo love your style!

[@desertblbuesman]

Is the wheel head easy to get off? I have read some say they believe the machine was damaged in shipping/bent wheel head or shaft to it. Did you discover what was wrong? Im considering buying one for a different purpose. Im also a potter. Thanks.

[@SarahWaltonPottery]

@@desertblbuesman hi, I did find the tool packet stuck up under the pulley, and that was what was making that noise. Now that I’ve removed the box of tools the noise is gone and I often use the wheel for trimming my pots. It’s been great to work on!

[@RoosterPootPottery]

It is a good backup. My Bailey is the best

[@SarahWaltonPottery]

I've used the Baileys wheel and it's a good one!! Brent, Shimpo, Skutt, Bailey are all the work horses for the pottery studio. With that said, I discovered that the noise during my testing of the Vevor wheel in this review was from the tool pack was jammed up into the pulley 🤪 must have got stuck during shipping. Now that I've removed them its much quieter, and I now use it for trimming. It's great!

[@rudyhermans4052]

For the a 10th of the cost of an established name it makes it a real easy choice . No matter how long they lastvor not

[@SarahWaltonPottery]

Right! It's a great wheel and I still use it sometimes for trimming. If I were just starting out I would absolutely buy one of these, that just wasn't an option back then. Cheers!

[@waiting4teatime]

❤

[@SarahWaltonPottery]

Thanks Michelle!!

[@Dystopiancircus]

I have seen other reviews of this wheel and they weren’t this loud. I bet something is rubbing on the splash pan.

[@SarahWaltonPottery]

Yep! I found the box of trimming tools tucked under the pulley. I'm guessing that they got stuck in there during shipping. Weird spot, if not for the sound I would have never looked up in there. Anyhoo, mystery is now solved and loud sounds are gone too. Thanks, your message had me dive deeper, I honestly thought it was just a loud wheel 🤭

[@Anointed77]

Hi😊

[@SarahWaltonPottery]

Hi! I'm over in the chat!