Infiniti Q50 and Q60 CAN Bus Flex Fuel Kit

[@spedsofter742]

do you guys have an installation video?

[@gumedelgado9984]

AMS is just the best of the market

[@AMSPerformance]

You are too kind! We appreciate that 🙏

[@RR-nl2ep]

What's up AMS! What mods can I do to my Q50 RS and G70 3.3T that will increase power and not void their warranties?

[@AMSPerformance]

Hello! Unfortunately we cannot answer for the G70 as we do not make any parts for that platform. As for the Q50, intakes and heat exchanger are good mods to start with that won't necessarily void the warranty. But what will void the warranty is not up to us as we are not the providers of the warranty. Typically, a warranty is not all or nothing. You can modify your vehicle and still retain the warranty, to an extent. If you modify something and experience a failure as a direct result, you likely will not be covered. But if you add an intake and have a suspension failure, you should have no issues with your warranty. Your best bet would be to call or email and our support team will be able to assist you further with any questions you may have. I will include our phone number and email below: 📲 847.709.0530 📩 [e-mail] We look forward to hearing from you and helping out in any way we can!

[@unwanted_zombie]

I assume my injectors and hpfp need to be beefed up for e85 on my 18 q60? Or are they fine for milder builds?

[@cjmitt1337]

need a whole fuel system for full e85 (LP+HPFP, injectors, lines, and ethanol sensor ) very expensive IMO prob would need a return system as well

[@AMSPerformance]

Good question, thank you for asking. My best recommendation in this regard would be to call in or email and our support team will be able to answer any questions you may have, I will include our phone number and email below. 📲 847.709.0530 📩 [e-mail] In short, those items may not be necessary depending on your goals. In order to run up to E30, we recommend at least the LPFP. For going above E30, then we also recommend the HPFP. Injectors may be fine if staying stock turbos. Your best bet would be to contact our support team and we will get you squared away! Thanks again

[@luisg.9125]

I bought a pair of intakes, the top stickers fell off the grommet on one side didn't fit just a crappy design overall and cheap for allot of money. Most of their products are not worth the money in my opinion..