Great video, I love 3ds Max tools that can be stacked up. One thing I haven't used much and doesn't seem to be covered much is the Parameters and wiring you mentioned in the video. That would be interesting to see more of this in action possible from a basic starting point and on to more advance uses.
@paulneale9 ай бұрын
Watch any of my rigging tutorials for wiring. I do it in many of my videos.
@artsayanart9 ай бұрын
Great to see how some rigging knowledge transfers over to modeling tasks like these. Very cool.
@alibekrayim9 ай бұрын
thanks for this video and telling about how 3ds max is so cool. I hate the fact that some people think 3ds max is no more good tool or its only for archviz.
@beecee7939 ай бұрын
Wow, still learning new useful tips from you almost 20 years since you helped me on some old cgtalk forums!
@studio3point39 ай бұрын
Paul the Great. Thank you🙌🏽🙌🏽🙌🏽
@hamed_ahmd6 ай бұрын
Very Helpful!
@pixelsbyprince9 ай бұрын
Some really interesting techniques in here, thanks for sharing.
@MrTeclis56859 ай бұрын
This is one of your best videos so far, really good stuff thanks!
@matiasfernandez56359 ай бұрын
Always nice to see you upload, you made some of the best 3dsmax content by far.
@roozbehparsa20849 ай бұрын
nice tip on weighted normals, its the magic
@anotherdoseofcorey78349 ай бұрын
You know I was really hoping someone would make an extensive video over this feature really appreciate paul
@xyzzzz69849 ай бұрын
I've always been a fan of such largerly non-destructive, procedural workflows, Autodesk should be enhancing such toolsets with every release. I'm very grateful for your videos, please make some paid ones if your time allows, your work should be rewarded.
@F10F11hm9 ай бұрын
A true master of the craft! You should totally consider your own Patreon, I'd be eager to learn from you especially in advanced rigging and animation department - I'm throwing money at the screen, yet nothing's happening for the time being.
@zohahs52766 ай бұрын
Nice I was looking for such tutorial you explained it really well this is why I love 3dsmax!
@giusmontreal9 ай бұрын
Always great material from you! I have to admit the viewport looks great :)
@paulneale9 ай бұрын
And I'm running a 1060!
@WaspMedia3D9 ай бұрын
Love the non-destructive worklflow. More videos! :)
@Gin_Gorilla9 ай бұрын
great video, I did not know that you can do that with Boolean really cool to see, keep it up
@renderstudio61613 ай бұрын
Excellent presentation.thanks a lot.you are in another level
@Bigalldone9 ай бұрын
Great stuff Paul. Thanks always.
@scgstudio5 ай бұрын
those "uneven" faces are even. it is just how max is calculating vertex normals. it takes them by angle between polygons / triangles and adjusts to the bigger one. So even flat faces can get wrong vertex normal directions. Weighted normals is readjusting them with different rules by overriding regular max algorithm and makes them explicit.
@paulneale5 ай бұрын
It weights them to the larger poly. So yes it over rides the typical averaging of the face normal.
@fadisoueidi41279 ай бұрын
Amazing tutorial. much appreciated.
@1981danielmn9 ай бұрын
great job as always Paul
@OfirGardy9 ай бұрын
Thanks again Paul. I wonder if there ever will be an Align Modifier ... I know you can do it with (some of it with) controllers (and there is even an external script that does that) but a modifier - like they did for array and symmetry (ex mirror modifier - which still exists) - I hope there will be.
@youngsiks5434Ай бұрын
Hello, teacher! I was truly impressed by your videos and feel like I've gained a new perspective on modeling. Thank you so much. Are there any paid or free lessons in your videos that cover the process of creating game assets from high-poly to low-poly and baking?
@paulnealeАй бұрын
I don't have any public ones at this point. I probably should do some.
@youngsiks5434Ай бұрын
@@paulneale Oh If you could record a lecture video for game hardsurface modeling, it would truly fulfill all my wishes. :)
@paulnealeАй бұрын
@@youngsiks5434 Be specific, what sort of models?
@youngsiks5434Ай бұрын
@@paulneale I would greatly appreciate it if you could create a tutorial on any topic but if I had to specify, I am interested in learning how to model firearms or waste containers using the Boolean modifier in a procedural manner. Additionally, I would like to learn about techniques for refining low polygon models during the modeling process.
@youngsiks5434Ай бұрын
@@paulneale As a student currently learning 3D modeling, I have noticed that most of the paid hard surface modeling tutorials available in the market utilize the TurboSmooth modifier for their work. However, after discovering the OpenSubdiv modifier, I have found it to be more user-friendly for hard surface modeling. Unfortunately, I have been unable to find many tutorials that demonstrate its usage, which has made it a bit challenging for me to learn and practice.
@jasondorris81209 ай бұрын
Great job!
@BlulightStudios9 ай бұрын
wonderful!
@Linkitch8 ай бұрын
We haven't updated to 2024 yet, so I haven't tested the boolean modifier much. But wouldn't a chamfer modifier set to "Smooth Chamfers Only" and check "Smooth to Adjacent" also fix most of the issues, without needing a weighted normals modifier always?
@paulneale8 ай бұрын
Possibly, will give it a go. I tend to just go with Weighted normals as a habit.
@fabiobarros48799 ай бұрын
Great Master
@stragalet58639 ай бұрын
so goood! so much thanks for this videos!!
@T5JCS7 ай бұрын
Hello Paul, I'm following since a while and I really love your channel. Nice videos and content, but, please, turn off the viewport High Quality settings, because it updates too frequently and it is pretty uncomfortable to look at, especially when you want to show us subtle changes. (it flickers all time)
@paulneale7 ай бұрын
Just turn off the progressive skylight.
@T5JCS7 ай бұрын
I know@@paulneale, I was suggesting you to turn it off in your future recordings, thank you. Can't wait to see the nest video !
@paulneale7 ай бұрын
@@T5JCS You mentioned the High Quality setting which controls far more. Progressive Skylight is a setting within the high quality. I personally wish it was off by default as well.
@slizgi869 ай бұрын
If only max don't cost like a crazy. I was max user since version 5, when it was in discreet hands and really like it, but when they move to subscription model I just stay with 2012 and then later moved to 2016. Last year, I dropped it for a blender, and I am not going back, it is too expensive.
@Pavel_Gorbunov3 ай бұрын
These are very convenient techniques, but they are not suitable for everyone. When working on game assets with strict restrictions on the number of polygons, you need a super clean topology without N-gons, which allows you to have a geometry that is easily smoothed with the Open subdiv modifier in order to bake normal maps. To be honest, the topology you demonstrate in this video terrifies me XD
@paulneale3 ай бұрын
Why does it? It renders in Max and UE perfectly. This is not a deforming mesh. Backing works as it should as well if you were in need of it but it isn't in need of it. Note, that every mesh that you have ever made is just triangles. now if you are using Subdivisions then you want quads, but why would I need to subdivide it? It is, as it is, exactly what I was after.
@Pavel_Gorbunov3 ай бұрын
@@paulneale Yes, I know that in the end it will all turn into triangles, I have been working in gamedev for more than 10 years. The geometry needs to be smoothed when preparing a normal maps for assets with a stylized art style, so that all the faces are nice and soft. A high-quality low-poly topology is needed in mobile games, where every polygon counts. Our pipeline looks like this: Base sculpture (at this stage your technique will do) - High poly (Made by hands, based on sculpture. Consists mainly of quads) - low poly model (consists of quads and triangles). We don't use UE, we have our own engine.
@viktorstrife37168 ай бұрын
this is great but... how you turn on glowing in the viewport? ))
@paulneale8 ай бұрын
Active Viewport Settings.
@omarleyvaofficial8 ай бұрын
Gooooooooooooooooooooooooood
@1981danielmn9 ай бұрын
could you do a video on your data channels to select wighted chamfer edges
@TheNicpersson9 ай бұрын
How do you handle precise dimensioning?
@paulneale9 ай бұрын
I rarely need to but if I do I use lines or other objects to see the dimensions that I want. Procedural objects allow you to type in exactly what you need .
@Kakuro7Ай бұрын
Love it !! bye bye sub-d modeling
@paulnealeАй бұрын
Sub D is still very much a thing and very useful, all depends on what you are making.