Infusion Pump 101

[@sangeetasang9437]

Thank you Better BioMed. You're doing a great job educating people with right knowledge. :)

[@rn87mom94]

Using the AVI plums since 1988. Before then, we had iVacs. They had this laser that you’d attach onto the drip chamber that counted the drops.

[@bernardlum4467]

Please do a video on CADD Solis PCA pump by Smith Medical

[@daltondelaney9534]

You did make one video where you broke down an Alaris 8100 along with a little patient monitor and a vacuum regulator. I remember watching it before I started helping out with one of the hospitals in my district for IV pump month it was super helpful because you tore it down completely and we’re really thorough.

[@sangeetasang9437]

Agreed. You're very cleat and precise. You know the PULSE and what's needed...

[@orlandodiaz4059]

Very good 👍 nice information

[@josecampo5207]

Buén video amigo. Muchas gracias. ¿Sabes como ajustar la bomba de infusión Medcaptain MP 60? Es que me está bombeando más de lo programado. Saludos.

[@sonalsandeepchand1608]

Hi, thank you for sharing the informative video. Do you have any repair videos on Hospira plum A infusion pumps?? We have a few at our facility and we end up sending it to Hospira service center for repairs..

[@BetterBiomedChannel]

I don't yet but now I will.

[@sonalsandeepchand1608]

@@BetterBiomedChannel thanks and much appreciated 🙏

[@scarops]

This was helpful. Thank you.

[@jp3d2k]

I believe Alaris is a linear peristaltic pump.

[@yankoalejandromartinezamay7966]

Hello, I have a problem with an infusionplum A+ pump, brand "N184 Prox Occl A/ Air. Do you know how to repair it? The line is not clogged.

[@BetterBiomedChannel]

There are 2 plastic lobes on the disposable cassette which are used to detect air in line. There is a clear / white tiny button insider the cassette tray which is pressed to clear and reset any errors.

[@yankoalejandromartinezamay7966]

@@BetterBiomedChannel I already press the button and the equipment erases the errors, but when I put the cassette back in, the same error "N184 Prox Occl A/ Air" comes out. the pump has 2 plastics inside the cassette, one white and one black. black is broken. I think it's the occlusion sensors. I have a photo, I can send it to you by mail please help.

[@salembajrami9019]

Can you do pm and cm videos on this?

[@BetterBiomedChannel]

Sorry, I won't do PM videos. Too much liability

[@salembajrami9019]

@@BetterBiomedChannel Just started working as a biomed 1 and sometimes the manuals are overly complicated and it is really hard to find good pm videos. But anyways appraciate a lot what you do!

[@350zLeMans]

Hi any recommendations on where I can find some good study material for BMET1?

[@BetterBiomedChannel]

I'd start here: Biomed Basics: kzbin.info/aero/PL5CYegjtMCQ4U0JiMgKLch69AxSyAYDMW

[@derrick5380]

I am trying to study for the cbet. Any idea on the best source of study material?

[@BetterBiomedChannel]

There are several study guides available but cbet study groups might help more. I personally like the flash cards to find your strengths and weaknesses

[@derrick5380]

@@BetterBiomedChannel thanks, so I guess any of them will do. I was googling stuff and there were so many different ones. I did see a site with a book and flash cards though so thanks

[@zoubirdjelouah3273]

Good