InkBird Wifi Aquarium Heater Controller: App Notifications; Dual Temp Probes and MORE!

[@kenbizzle8597]

I instantly subbed as soon as I saw those badass sideburns

[@jasoncrimmel]

I've been using this same wifi controller for a year now and it works great.

[@johnkidd3975]

I have two of these, one on each of my systems. I recommend getting one. I like knowing when the tanks temp is off its normal setting. I can check my phone and see what is going on. Not bad for 60 bucks. I haven't had a heater fail for me and with this controller hopefully never will experience that pain. If your new to the hobby pick one of these up, it is a good investment.

[@jaydenlayton4577]

instablaster...

[@sheldonpaula]

My only surprise with this unit was that you can not have both channels set to the same temperature, they have to be .5 degrees celsius apart. I divided the suggested heater size in two thinking 2 x 150 would be safer than 300, but, the lower set point is on so much more and trips the continuous heating alarm. Still a great product at this price point and the mistake was mine for not researching first. I did get an email alert while on a mini vacation a few weeks ago. I was able to reset while I was away as it was just the continuous heating alarm. I honestly believe this belongs in the essential equipment list if you do not have a controller for your system.

[@INKBIRD-official]

Dear, the ITC-306A is an on/off controller, which maintains a temperature range, so there needs to be a temperature difference between the heating on and off values. In addition, please note that the two heating outputs of the ITC-306A will be switched on and off at the same time, they cannot be set separately. If have any question, please feel free to contact us by email [e-mail]

[@sayurasem]

Just ordered the ITC 308S model for heating and cooling!

[@crankbait09]

can you plug two heaters into one controller, or do you need a controller for each heater?

[@truthfactreality6814]

I have this. It’s great. I use it in my discus tank after a heater malfunction and nearly cooked the tank. I use titanium heater with it

[@CalcioFan4Ever]

I just got one of these but its not the wifi version? Does it matter since i have a apex?

[@BRStv]

Shouldn't be a big deal then. Just set the Inkbird as the backup and the Apex as the primary. That way, you'll have WiFi control via the Apex 😀

[@fadijohn]

Quick question - if you're using this with a heater that already has a thermostat built-in, would you just set the temperature on that heater to something higher than what I want my tank? So basically then the heater will run continuously until the InkBird shuts it off, thus bypassing the heater's internal thermostat shut-off?

[@nathangriffin2027]

Exactly - correct.

[@BRStv]

You got it!

[@markpaulson1346]

​@BRStv I know this post is old, but, would you do that with both heaters if they're both plugged in to the inkbird 306A? Set the heaters at a higher temp than your target temp for the aquarium? Thanks!

[@johnfontaine1257]

I have had one of these protecting/controlling my nano with two 50 watt heaters. It works great. I had issues with it dropping WiFi and then the app wouldn’t receive the alarm conditions but updates fixed both of those issues. I bought one as a backup to have just in case of failure. They’re not expensive, easy to have a second on hand.

[@BadKittyNoMilk]

I’m mew to this. What’s a tank crash and when you say I have no idea how this works nor how to install it. Why would it turn off? My water is heating up because we don’t have AC in the area where the tank sits😢

[@صوفيالساعدي-ع7خ]

هل من الممكن وضعه كمتحكم في درجه حراره حاضنه البيض

[@jakespeed5337]

Which outlet is for T1 and T2? The two outlets are not labeled. Also what temp recommended for T1 and T2 when running two heaters?

[@BRStv]

T1 will always be the left outlet and T2 will be the right. 78-degrees is where we target our tank temps, so if you were using T2 as a backup, I would set it slightly lower than that to ensure the tank temp doesn't fall too low.

[@ryan9038]

Where should I put the probes? Both in the sump or both in the tank or one in the sump and one in the tank??

[@BRStv]

InkBird suggests putting the probes together before the heating element(s) in a high flow area.

[@crimson_010]

Can you turn off the alarm from your phone?

[@saramarie516]

Thanks for this Spotlight! A controller is next on my list...probably should have been higher than now, but my heaters are pretty new. I would certainly hate to have one fail on me and not be aware!

[@amplifiedlarry5449]

If my target is 86f…what should t1 and t2 be set at

[@markpaulson1346]

I'm trying to find out the same thing, can't find any answers so far

[@amplifiedlarry5449]

@@markpaulson1346 ya I got frustrated with using the two plug ins on the inkbird so I started using just one of the two provided(t1 I think)…and I use a finnex titanium heater with it,I kept breaking glass heaters….and in another plug in on the other side of the room I run another heater..my target is 85 so I run my finnex(inkbird) heater at 85 and the other heater that’s plugged in on the other side of the room at 84..it’s been doing it’s job

[@Brimmlinn]

Now if only BRS Titanium Heaters were ever in stock...... Same thing as many of these videos. Maybe pick something you have some stock of.

[@BRStv]

We hear you on the BRS heating element stock issues. Good news is that this controller works with just about any titanium heating element. Plus, BRS heaters should be here in about 2 weeks 🙂

[@leo2o915]

What’s the best titanium heater to pair with this controller ?

[@BRStv]

We suggest the Schego built BRS titanium heating element 🙂 www.bulkreefsupply.com/titanium-heater-element-bulk-reef-supply.html

[@ryan9038]

The only thing I don't like about the ink bird is the suction cup. It's white when almost every aquarium background is black and they don't work at all my probe is always floating around. I wish they made it magnetic!

[@INKBIRD-official]

Dear, thanks for your suggestion, we will feedback it!

[@BlueLagoonPoolsAndAquatics]

I was reading reviews on this controller and it looks like people are not happy with it at all

[@mewrongwayKOCXF]

Can you have 3 controllers on one app? I have 3 aquariums.

[@INKBIRD-official]

Dear, our app can connect to multiple controllers. If have any question, please feel free to contact us by email [e-mail]

[@vanstaal6598]

what is that haircut lmao

[@adamschaafsma5839]

I need one

[@smiles1969able]

mine will not connect to wifi no matter what i do ruined my day

[@INKBIRD-official]

Daer, sorry for inconvenience! If have any question, please feel free to contact us by email [e-mail]

[@sasfishadventures9729]

SAME

[@jachoreefer]

Now they need to make a wifi controller that also has cooling 👍

[@Mike__B]

Inkbird does make a controller that has a heating and cooling plug similar to this.

[@cael7919]

it's called inkbird ITC - 308 :))

[@jachoreefer]

@@cael7919 yeah that one is not Wi-Fi and the probe is metal not good for reef tank I have the ITC 308s and it comes with an aquarium probe, but is not wifi.

[@cael7919]

@@jachoreefer there is a wifi version! :)

[@jachoreefer]

@@cael7919 can you tell me what model for cooling and heating with aquarium probe and that is wifi, thanks 😊

[@reefmortician8361]

Buy it on eBay. 38 bucks. Brs is stealing your money

[@azhunter400]

I'm really surprised BRS is getting behind Ink Bird products. I've crashed several tanks due to these junk controllers. Never again

[@saramarie516]

The reviews aren't great. Do you have one that you like/recommend? I am looking to add one to my tank.

[@alexortega9645]

​@@saramarie516 innovative marine helios is peobably one of the best. Theres also the industrial style Ranco controller. Both are very good options with very great reviews.

[@spankyhp]

doesn't mention how it also works with some wifi plugs in your house so it can also do cooling etc. see this video for more info kzbin.info/www/bejne/r2XTpJaajK2Fos0