Inmoov full body robot demo with speech and gestures presentation

#inmoov #robot #bambulabp1s #3dprintingtechnology #technology #diyroboitcs #fullbodyrobot

[@stefanw8203]

Very nice inmoov build. Thank you for sharing

[@kevinwhitcomb4495]

Fantastic! Are there servos that are silent available anywhere?

[@super_mingo]

How much did the full build cost

[@kax2137]

change the speaker

[@user-ms2vl8bl6c]

Ke bonito

[@rasuru_dev]

The design is terrifying. Many things, one of them no blinking. Still, very impressive

[@matthewwriter9539]

Good news, because this is open source you can modify your own and fix the errors.

[@Human-bc8hj]

I'm unable to find could you please give links of latest version of inmoov? ​@@matthewwriter9539

[@Yutani24]

Hello, I would like to ask for advice. Unfortunately, I couldn't find an answer anywhere. I have been assembling the Robot for a long time, due to a change in the type of printing material. I'm trying to rely on several sources, since Mr. Gael's website is not detailed.. I need to know if all servos except the hands (wrist and fingers) must have the latch pulled out? Another problem I'm solving is... that I can't set the trimmer to an intermediate position so that my servo doesn't move, unfortunately it always starts to turn in some direction, is this normal or should I solve it? I have to ask, do I always have to have all trimmer positions set to "0" position, i.e. not turned in any direction? And the last problem.. the lower Stomach has a nut attachment due to attachment to the plate with servos for swinging sideways.. the printout does not say how I should attach these four screws.. the plate for the low Stomach does not have holes through, but the printout counts with four nuts , how should I catch them? I will be very, very happy for your answer.

[@DIY.ROBOTICS]

Hello, i think you should join the discord server it’s very good place to troubleshoot but i will help with some of your questions as i can. You need to relocate the potentiometer on the biceps and the shoulders(all three of them) stomach and waist only as i remember. Most of the servos need to be at certain degree when it’s installed. And in regards of the lower stomach i remember that it has a ring attached with side screws that hold the upper plate with the bottom one.

[@Yutani24]

Good day. Thank you very much for your reply. Unfortunately, my English is not that good to communicate on a technical level. Even now I prefer to write through a translator, which is not the best, but at least he will understand me a little. I don't know if someone in my country also builds Inmoov, Maybe I could find such a person in the same time as learning English better :( Unfortunately, I have a lot of questions about building here, and the translator can't always translate exactly what I need to say. I have made the whole torso, and part of the biceps. The parts of the arms are not easy to print (ASA), the screw is too big according to Gael's design. Otherwise, the wrists and the bending of the fingers are a problem .. either they don't bend or they don't return, that will be a problem in the direction of the biceps.. and I don't see the point of it anywhere Gael a detailed description of the assembly, so I will help with the translation. But, if I were to assemble something now, there is a risk that I will have to tear off the structure. As it turned out, such a mistake cost me xx hours of additional printing :(

[@andreasmavronikolas6953]

Where did you find the leg files ? I thought whey still haven't made them

[@chaoticlabzdev]

the legs arent motorized meaning they dont work, the legs here are just so that the robot looks complete

[@gueguesaldivar]

T54r

[@moviearchive3718]

well done, now make it walk