InMoov i2Head build Part 1

Building the head's base, upper teeth, Upper lip servo and check puller servos.
Parts Used:
JX Servo PDI-1109MG
JX Servo PDI-6221MG
6 x M3 x 4mm long x 4mm Diameter Nutserts
6 x M3 Hex nuts
6 x M3 x 14mm Countersunk Screws
6 x 0.8 x 6mm long self tappiong screws
4 x Phillips Head 4g x 6.5mm Self Tapping Countersunk Screws
2 x M3 x 20mm long screws
Inmoov Head Stand For Articulated Neck by Maverick_makes on Thingiverse: www.thingivers...
NeckPlateHighV2.stl
NeckPlateV2.stl
NeckV2.stl
NeckJointLowerV4.stl
NeckPistonFrontV1.stl
2 x NeckPistonV2.stl
2 x NeckPistonSideV1.stl
MainGearV2.stl
GearHolderV3.stl
FaceHolderRightV4.stl
FaceHolderLeftV4.stl
ServoGearV2.stl
TeethTopHolderV1.stl
TopTeethV1.stl
CheekPullerV1.stl
UpperLipV1.stl
LowBackV5.stl
servoHornAdapterV1.stl
servoAdapterV1.stl
Please Like, Subscribe and ring the notification bell to be alerted when the next video is released.
It also a form of support that costs you nothing, but does help the channel a lot.
Also please consider joining my VIP Patreon's GoLucky and Louwrens Burger, as well as my Builder Patreon Lmorales45 in supporting the channel on Patreon.
/ cyber_one
Builder level Patreons get the videos a week before KZbin does,
VIP Patreons get the videos as they are created, from 1 week to 2 months before KZbin.
Alternatively you can help with a donation via paypal
www.paypal.com...
Maybe drop into the discord server for a chat :-)
/ discord
I have a number of Play-Lists that may also interest you:
Spot Micro build using MRL
• Spot Micro
Fred's modified Inmoov Robot Head created in the Fred's Head Series.
• Fred's Head, Inmoov Robot
Fred's Head, a better stand. (This series)
• Fred's Head a better s...
The Inmoov Walking Robot Series.
• Inmoov, Walking Robot
Fred's Static Leg build and attach series, now finished.
• Fred's Static Legs
The Creality CR10S5 3D Printer Series.
• Creality CR10S5
The Cocoon Create Touch 3D Printer Series.
• Cocoon Create Touch
My Industrial videos.
• Industrial
And finally some of my unboxing videos.
• My Reviews
See you in the next video :-).

[@carldawson7122]

Great job as always! I do hope that the stl versions available in the InMoov gallery will work with your tutorial. Some parts in InMoov are up to V3 or V5 while your stl list shows as using V1, there are numerous examples of this. Hopefully their changes are minor!

[@CyberOne]

Should be. I didn't notice any big issues with the files while I was building, so I don't see them changing soon

[@ambybot]

Very nice job andvtuto❤

[@CyberOne]

I've been liking this build. I just need to make the face now :-)

[@kifferbuddies8622]

Looks awesome. I like the clear plastic.

[@CyberOne]

Me too! Lets me see what's going on inside to a point :-)

[@kifferbuddies8622]

@@CyberOne reminds me of old school electronics of my childhood :D

[@CyberOne]

Yes in deed, but the parts were bigger and less sophisticated than when I was playing with them in my childhood :-)

[@NourMohamed-nz6cl]

We need part 2 ❤❤❤

[@CyberOne]

The next part covering the left eye assembly is scheduled for the 24th of this month. It is however already available for member and patrons :-)

[@perseuspfohl]

Awesome job as always cyber ❤

[@CyberOne]

Thank you! 😄 I'm glad you liked it 😄

[@shadowfighter7085]

Can you please post how to setup the i2 eyes

[@CyberOne]

That is already recorded and will be released in next weeks video 🙂

[@shadowfighter7085]

Please post it as early you can 🥺

[@CyberOne]

The next part covering the left eye assembly is scheduled for the 24th of this month. It is however already available for member and patrons :-)

[@ZenHulk]

I wish someone would design a none inmoov head, i have printed it 5 times in 8 years, not one works even close to acceptable, and that Gael guy is so rude he makes his country proud to everyone.

[@CyberOne]

There is a Canadian guy who has done a great job a couple of years ago. Goes by the name CyberSyntek and has a few videos on you tube as well. www.youtube.com/@CyberSyntek His github with all the STL and instructions can be found here: github.com/CyberSyntek/Syntek-Edition-Head-Remix