How to change Engine Mounts - 2001 Toyota Solara

[@somcheezybread3677]

what about the other 2?the rear mount and the transmission mount

[@antoniowade3318]

Outstanding video

[@kaibaumgartner7721]

You forgot one important mount, the rear one that bolts to the engine block behind the engine, that the Right side CV axle goes through. I replaced that one on our 2003 Sienna and it was a chore. I had to cut the axle shaft in half due to the bearing seizing inside of the mount bracket. That one will take you all day if it has any corrosion on the bearing.

[@imports4lifetoyotalexus98]

He just got the other 2 mounts? Please show that video too.

[@jonathanpape3704]

Can broken motor mounts cause excessive vibrating when accelerating and coasting? I have a 2003 Toyota solara

[@lexus3577]

Shouldn't you tighten all bolts except the one on top of the mount before dropping the jack? If you dropped the jack first, then the bolts on the metal bracket that holds engine to the mount would be under tremendous stress and potentially may get bent.

[@mohdzahirullah4808]

nice video.

[@sipr6]

Do you have any videos of how a engine with good mounts move? I had mine replaced only 3 months ago and I feel like they're a bit looser than when they were brand new. I've replaced the dogbone and front mount twice in 2 years. Both mechanics say that the bottom right mount is ok, but I wonder why the first set only lasted 2 years. I have a 2002 Camry by the way.

[@InnovaAuto]

+sipr6 Thank you! Unfortunately we do not have a video to show how a good motor mount would work, but we shall look into making one! If you have any other recommendations on more How To Videos feel free to share! If you have any questions regarding our tools feel free to give us a call at [phone]. We are open 7 days a week from 6am to 6pm PST.

[@whyarentuavailible]

What do you do with the motor mount under the vehicle?

[@InnovaAuto]

+Welington Jimenez Thank you for your inquiry. This is a generic video on how to change the motor mounts. We suggest to consult with a service manual on how to properly change the motor mount step by step.

[@huipchn]

Nice

[@edparrish5411]

good video but what are the specs for the torque I know by experience that's very important

[@InnovaAuto]

+Ed Parrish Thank you for your inquiry. This is just a general video. To get manufacture torque specifications we suggest to consult a service manual for the vehicle.

[@tariqkh2tariq154]

Who can I change mount for Toyota Yaris 2006 ?

[@donfacey9973]

I have B15 when ever I Am in drive on hold the break the engine vibrating on make a lot of noice. could that be I need engine mount

[@InnovaAuto]

+Don Facey Thank you for your inquiry. We do not have service manuals for your vehicle to give you repair advice. We suggest referring to a service manual for the issues you are having with your vehicle.

[@koomo801]

I watched the entire video, waiting for him to remove the bad mount and show us whether there was any obvious play in it. Didn't happen. Then I waited for a post-installation repeat of the engine brake test to see the difference in engine rise, and it didn't happen. It didn't show what the rubber in the old dogbone mount looked like, either. On a positive note, it was under 8 minutes.

[@whyarentuavailible]

Im having a difficult time replacing it

[@InnovaAuto]

+Welington Jimenez Thank you for your inquiry. If you are having difficultly with replacing the part, we suggest to consult with a service book for your vehicle for proper installment.