Innovative Auto Creations C6.5 Corvette Wickerbill Spoiler Reviewed and Installed

[@InJasonsGarage]

I show you everything you want to know about the C6.5 Wickerbill Spoiler for the C6 Corvette. From initial unboxing to installation to driving impressions, check it out! Get yours: geni.us/c6wickerbill (IMPORTANT NOTE: As of early 2023, no longer available from the original source. Currently available from without the additional customization and serial number...at HALF THE PRICE!) Here's a quick walkaround video - facebook.com/1806821076074111/posts/2519843388105206/

[@armandoestrada8499]

The wickerball looks really good! But its meant to be on the c7 as it has too many sharp edges too much going on that doesn't flow with the smooth lines of the c6z06. I just did the morimoto headlights and they look so darn good! Looking forward to seeing that install soon on your car!

[@wyattoneable]

I'm not sure the spoiler is for me but you provided good information and your videos are well edited.

[@InJasonsGarage]

Thanks! Glad you like the vids, I have fun with them. I was on the fence with the spoiler, and I probably wouldn't have purchased it if there weren't reports of it actually being functional. Now that I have it, though...I really like it.

[@jamesditta2165]

I actually have to order the upgraded hardware, looks much better than the standard, nice touch

[@InJasonsGarage]

Yeah, it is well worth it.

[@InJasonsGarage]

I got some grief from my viewers for not showing more of the entire car. I suppose I deserve it...so here's a quick walkaround video! :D facebook.com/1806821076074111/posts/2519843388105206/

[@michaelyoshino9124]

Great video, just the tipping point I needed to purchase one, didn’t disappoint, exactly as you described, bitchin. My Z is all black so it looks even more sinister ! Keep up the great work and content ! PS, I just purchased the Eflex e85 kit, can’t wait to install it, 600rwhp !

[@Teramydog]

That spoiler is bad ass.

[@2coolentertainment]

Yeah it is

[@jamesditta2165]

Looks great, I used the same one on my 13 grand sport, always gets looked at and draws a lot of attention to the car !James long Island

[@InJasonsGarage]

I was afraid I wouldn't like it, but I definitely do. Do you run Stage 2 or State 3?

[@coledrevenj]

Stage 2 definitely looks the best.

[@InJasonsGarage]

I agree, and that's how I have been running it for the most part since I made this video. Still, zero regrets!

[@jayd1008]

why did you change the zr1 spolier ? does this new one give better downforce ? did you notice ?

[@InJasonsGarage]

I liked the look and wanted to see the differences. Pretty happy with it still. I am sure it provides more downforce, but I am unsure if I personally noticed or not.

[@Vffr1]

Looks great. Love the Stage 2. Stage 3 not so much.

[@InJasonsGarage]

I agree 100%!

[@leebub207]

pretty sweet but I just installed my zr1 spoiler from rpi and love it!

[@thedriverscorner]

Alright! Glad I found your channel. I’m semi local to you in Williamson Co. Let me know if you ever go to Cars and Coffee I’d love to check out your build! Getting my channel going, you have set the bar!

[@InJasonsGarage]

Awesome! I am alway up for meeting up in my area. I hit CandC once in a while in Franklin, and expect to be a lot in the coming year. I'll hit you up when I do. Until then, I am following your channel. Keep it up!

[@thedriverscorner]

Jason's Garage thanks! I’ll be there Saturday this week, unless I start installing my new heads and cam setup!

[@v8s105]

Hi Jason I want to say thank you very much for the video I ordered my spoiler 3 weeks ago it will be in in a few days I was told but I wanna let you know I ordered the same washers and bolts that you requested to use for a better look in stronger bolts for the spoiler,,, i let the company know about you so I gave a great shout out for you...

[@InJasonsGarage]

Cool, glad I could help! You are going to love the quality!

[@malcolmguidry158]

Are you still sporting the 6.5 Wickerbill and do you still prefer it to the ZR1 spoiler?

[@InJasonsGarage]

I sure am and I still like it. I do sometimes miss the subtlety of the ZR1 spoiler, but I have no plans to go back to it, at least for now.

[@jimmielenior3779]

nice video I'm thinking about one for my grand sport kind of pricey but looks great

[@InJasonsGarage]

Go for it! If you like the look of it on mine, you will love the look of it on yours.

[@deanoconnell4541]

Did the spoiler come with hardware? Might have missed that

[@InJasonsGarage]

@6:30

[@Maximus091768]

I think I like the ZR1 spoiler better. Great vid.

[@InJasonsGarage]

Sometimes...I kinda think I do too...but then when I see my car as a whole...I do like it. The nice part is that I can switch any time I want...if I want. 😎

[@deanoconnell4541]

Question? Im wondering if water/rain gets in any of the holes?Did you have to do anything with the old or new holes? Your thoughts? Im waiting for my spoiler to arrive

[@InJasonsGarage]

Nothing to worry about. When you pull your old spoiler off, you can almost look straight down the holes and see the surface the car is sitting on. It is surprisingly hollow and open behind the rear bumper cover. Any rain that gets in the holes simply drops down to the underside of the car, no different than the factory spoiler. If anything, the C6.5 is better because it has that gasket.

[@Clemens-bar]

New 6.5 spoiler arrived. Sold by Online Extreme now all thru Amazon, but no hardware upgrade offered. Also received their splitter and side boards for my 2012 GS. Items impressed me with paint quality, had heard stories. Any last minute tips on installing these bad boys. Also still waiting for my bezels and airbag trim for my revesol steering wheel. Lots going on. 😊

[@InJasonsGarage]

I got word a little while ago that Innovative Auto Creations might be stopping the sales of the spoiler, but I wasn't sure how that was going to play out. Other than the serial number plate and the custom options for color and hardware and all that, do you see any difference between what I have in this video and what Extreme Online provides?

[@Clemens-bar]

Ya, saw that their website name was up for sale so I figured. The actual pieces for the wicker bill 6.5 looks just like your video but without what you mentioned, hardware, color, choices, and serial number. Paint looked excellent packed very well. I see no issues with the install, but did see one video that use the foam to seal gaps at the end. I’ll see how it looks and go from there, nothing difficult, really, just making it fit. Since it comes with its own third brake light, I need to return my European model LED third taillight and buy a little box that does the blinking third brake light routine. And install that as well. Now we are getting into your other territory of lighting. Lol.

[@huskymoto9207]

Man, this is Crazy. Most of the comments are on not liking the C6.5 looks. I've been looking for a more aggressive spoiler for my Z06 and then this shows up. I was like Ohh Hell Yes. But After seeing the way it looked installed well, I'm not to sure now. It's one thing going around thinking the new spoiler looks bad ass but when most other people think it looks kinda Gay well, makes ya second guess it now. Lol. Can you post some pics of it sitting out on the street at like a side angle and from a rear view(standing behind the car) getting the entire shot of the car in it. I think this might help. The vids are really close up and it just dont show the true beauty of it all. Thanks for all you do Bro. Great work👍👍

[@InJasonsGarage]

Yeah, I posted a video on my Facebook page here: facebook.com/1806821076074111/posts/2519843388105206/ Better? 😎

[@jayhilliard4365]

I wonder how the extra downforce affects the front (aero wise). I know the ZR1 spoiler was matched with front splitter to help minimize front end lift.

[@InJasonsGarage]

That's a really good point. Probably something that shouldn't be overlooked. I do have a ZR1 front splitter that I need to install to balance everything out, I'd better start working on that.

[@jayhilliard4365]

Jason's Garage make sure you install the splitter brace as the front is not strong enough when installing splitter only.

[@InJasonsGarage]

@@jayhilliard4365 I have one on order! That's one thing that has been holding me back.

[@InJasonsGarage]

Just in case you missed it: kzbin.info/www/bejne/ommVg6d_rMaIopo

[@fabian4213]

Hello J. If you want to get rid of your RPI spoiler, I'll buy it from you.

[@InJasonsGarage]

Sorry, it was sold a long time ago.

[@32krazy1]

nice video. im in Rutherford county with a c6 zr1. my buddy lives in greenbriar with a z51 c7 w/ a Procharger torch red im sure you have seen it.

[@InJasonsGarage]

Hey cool! Always nice to see from Corvette owners close to me. When I first moved to the area from Nashville, I lived in Greenbriar for a but. Now I live just a few miles south. I think I did see your buddy's car once or twice. Shoot me an email at [e-mail] if you guys wanna get together for beers one day.

[@32krazy1]

@@InJasonsGarage I will definitely do that. mine is on the lift for the winter getting blower ported and full bolt ons. we will be at beech bend on opening day to see how the cars run

[@InJasonsGarage]

@@32krazy1 Gimme a shout when you guys plan to head up that way on opening day.

[@32krazy1]

@@InJasonsGarage will do. im on your f/b page now

[@brianmiller5043]

I just ordered the spoiler but could not order from your link as that website is no longer active. The upgrade bolts were not mentioned or an option. Do you know where i can order them from? Thank you.

[@InJasonsGarage]

I got word that they might be stopping the sales of the spoiler, but I wasn't sure how that was going to play out. I am unsure where to get the upgraded hardware. I think it was exclusive to them. Where did you order yours from?

[@brianmiller5043]

@@InJasonsGarage I have replied to this twice now. Why is my reply being deleted?

[@InJasonsGarage]

@@brianmiller5043 No clue, I am not seeing them posted. But that one somehow managed to make it though. Are you including a link? Sometimes KZbin prevents that.

[@brianmiller5043]

@InJasonsGarage this is the place I ordered the spoiler from. Hopefully others see this and avoid ordering from this company. extremeonlinestore.com/?gclid=CjwKCAjwwb6lBhBJEiwAbuVUSrBfjJAwiHH0t0hc4IImvsfwDpQP21C0-uHUhQxpK1NG_bqgcJV2dRoCeyIQAvD_BwE

[@InJasonsGarage]

@@brianmiller5043 That one came through. Are you saying that people should avoid Extreme Online Store?

[@luckswym2106]

Will this fit my 2005 ? C6

[@InJasonsGarage]

Yes, it should fit any C6.

[@timwheaton7785]

Great video Jason as always love your channel! I see you live in Tennessee and was wondering if you were going to be at the Vette Fest in Pigeon Forge in October. It would give you a chance for meet and greet plus gain more subscribers. Just a thought, keep up the great work!! 😎👍

[@InJasonsGarage]

I am am hoping to!

[@silvafox07]

I wonder if that would fit on a C5.

[@InJasonsGarage]

I honestly do not think it would.

[@deanoconnell4541]

What did you pay for the spoiler? They say innovative on Amazon but the comments say fake Amazon they are 600 Any thoughts ?

[@InJasonsGarage]

I bought mine direct from Innovative Auto Creations. Yes, I paid more than what is on Amazon, but I wanted to know I received premium quality and I didn't want to have to pay to have it painted and to have to deal with potential issues like the 3rd brake light not working or fitting. In the end...it wouldn't have been that great of a difference if you factor in both time and money.

[@Paul32828]

I really like your information videos! I like the look of this spoiler but I have a APR carbon fiber one on my C6 and that costs too much money for me to replace. I had installed a set of the led tail lights on my C6 after you did the video for them and they look GREAT! I have just installed the C7 headlights on my car and they look much better than the stock units. If you are ever thinking of installing these headlights on your car I would recommend buying the from Radio Innovations because they have a wiring harness to be used to just plug and play the new units in your car. If you do not use the wiring harness only from them which is free with the headlights if bought form them it is more difficult in wiring up the new headlights. Check them out sometime! Please keep the videos coming!

[@InJasonsGarage]

Thanks, Paul. Glad you like the vids. I have fun making them. As I mentioned, I am on the fence with the Morimoto headlights because I think it gets closer to trying to make the car look like a C7...almost being a poser type of thing. I don't know if I am the minority of that thought, though. Definitely on the fence. How did you do the installation? Did you remove the bumper cover?

[@IZE83L]

did you ever sell the RPI spoiler?

[@InJasonsGarage]

Yes, I sold it shortly after this video was released.

[@RonTimmonsM1]

Personally my tastes are the one you took off lol Thanks for the video

[@InJasonsGarage]

You bet, thanks for the feedback. 👍

[@WideOpenThrottleC6]

ah damnit, just saw this one. it looks good too. unsure of which to go with now, this or the zr1. im thinking zr1. this one is a little pricey, but looks great

[@InJasonsGarage]

After having this installed for a while...I feel it is worth it. The more I look at it, the more I like it. Just enough for a modded C6. Maybe just a bit over enough, but as a friend of mine used to say, "too much is just enough". I use that advise sparingly, but it works here! 😎 I am still impressed by the quality. If you order one, you will see as soon as you open the box. If you like the look, get one. You won't be sorry.

[@michaelmcclaine2431]

Jason, I cannot find the Video in which you described the Harness which prevents Hyperflashing! Can you please forward that information to me and who I can purchase it from, thank you very much, Sir!

[@InJasonsGarage]

Are you talking about my other video about taillights? That would be Radioflyer Innovations, which is now Sharp Light Innovations (sharplightinnovations.com/). You might be looking for this: sharplightinnovations.com/shop?olsPage=products%2Fc6-corvette-plug-and-play-tail-light-resistor-pack-for-leds. If not, let me know and I can try to point you in the right direction.

[@casino8857]

What size lip do you have on your wheels

[@InJasonsGarage]

It is a step-lip, but about 1-3/4" in the front and 2" in the rear. More on them here: kzbin.info/www/bejne/iJbdhqpjqZKVg9k and here: kzbin.info/www/bejne/q32zpoWoqNqInbc.

[@johnsn10]

Can I buy your old spoiler?

[@InJasonsGarage]

Sorry friend, but it is long gone.

[@KevinsDatsun]

Considering selling the old spoiler?

[@InJasonsGarage]

Yes, I still have it in a box in my garage. I should put it up for sale...

[@KevinsDatsun]

Shoot me a text, I’m interested! 407-399-1363

[@InJasonsGarage]

@@KevinsDatsun Are you on Corvetteforum?

[@KevinsDatsun]

No just some z06 FB groups

[@InJasonsGarage]

@@KevinsDatsun OK...let's make it. easy. Shoot me an offer to [e-mail]. :)

[@gs3504]

I'm a bit surprised IAC didn't do a better job aligning the installation holes... Granted no one will see it, but it drives me crazy...

[@InJasonsGarage]

I do agree but I have to think there is a reason for it. I couldn't tell you what those reasons are at this point. :) At first, I had real crummy feelings about the holes, but I got to thinking...it will never not be covered and don't think I will have a reason to add more of them. And..the car car with side skirts (unknown company) that are screwed to the body and I didn't have problems with those holes. Can't change it now! :)

[@bsfunk44]

I'll be going with the carbon fiber zr1 spoiler from RPI that attaches with 3m double sided tape so no drilling

[@InJasonsGarage]

I have heard that the double sided tape installation works well. Let me know how it goes for you!

[@nickplenzick2602]

Looks like a quality product and nice video. However I think it looks too much like a race car item. If my C6 was going to me more for the track then this would be great. For the street I think the ZR1 spoiler looks better.

[@soadous]

excellent video

[@InJasonsGarage]

Cool, glad you like it. I am super happy with this spoiler.

[@gtab6936]

I’ve always liked these wickerbill style spoilers, and have only seen them on a few C6’s. Looks great! Any plans on doing the morimito C7 style headlights?

[@InJasonsGarage]

I am on stuck the fence with the Morimoto headlights because I think it gets closer to trying to make the car look like something it is not (a C7). It almost stopped me from getting the C6.5 Wickerbill Spoiler. What do you think?

[@gtab6936]

Jason's Garage I agree with that. I’m partial to switching the stock headlights for black OEM ones to give the front a unique but more restrained look than the C7 style.

[@InJasonsGarage]

I have a set of OEM black headlights on the shelf, just needs new lenses. When I pull the front bumper off to add a front splitter reinforcement, I will likely install them.

[@TheBeastCarson94]

Spoiler looks great! I have a question about your RPI ZR1 Spoiler, did it bow out right under the third brake light? The thin plastic under the third brake light bows out on mine and I see it all over the corvette forums. Thanks.

[@InJasonsGarage]

It did a little bit, but I did some adjusting of the position on the rear bumper cover and I managed to get it pretty straight.

[@TheBeastCarson94]

Jason's Garage Thanks for the reply, Jason. I have a 2007 Z06 with around 19k miles and I am loving the videos. Keep them coming!

[@Itsjustac6]

Can I have your old ZR1 spoiler😭????

[@InJasonsGarage]

I may be putting it up for sale here in the near future. Make me a fair and reasonable offer on it! ;)

[@atravesdelvaso7516]

That gorgeous car needs some black exhaust tips 👌

[@InJasonsGarage]

Thanks, Kevin! I thought about that...for sure. I think if I get some headers installed (which is likely, stay tuned) I will get them painted.

[@RedPillBroadcast]

jOHNIES RIPPED OFF AT 167 in the half mile run last weekend

[@devendavidoff]

For both I would have used the factory holes and secured the rest with 3m doubled sided trim tape. No holes. Not worth drilling for something this cosmetic.

[@InJasonsGarage]

I thought about it. Maybe I shoulda...but since it would not be the last mod I did on the car, I just bit the bullet it started drilin'. 😬

[@ricardotenorio3815]

Nice. But for a grand there are better mods in my opinion.

[@InJasonsGarage]

Agreed! It is all up to the owner's priorities.

[@gustavomunoz7135]

Wanna sell your old spoiler?

[@InJasonsGarage]

Sorry buddy, it is long gone.

[@SilvernFit]

Very nice!!!! but $1K is steep.

[@InJasonsGarage]

Agreed, it is but like many things, you get what you pay for as the quality is top notch. I have been getting a lot of compliments on it since I installed it, more than I thought I would because I thought it would be a "love it or hate" it situation. Maybe it is one of those things where photo and video doesn't quite capture it but real like does?

[@SilvernFit]

@@InJasonsGarage Agrred!. It is a great mod!!!!

[@ChadWoodNC-PiedmontSkyCams]

Would you want to sell me your RPI spoiler?

[@InJasonsGarage]

Sorry, sold a long time ago.

[@DJStrikeItUp]

No way would I ever drill into the body of my car like this. If you are buying something thats an aftermarket and its a quality price, then the manufacturer should have made the part to align to the factory holes. Just my humble opinion.

[@InJasonsGarage]

I do agree but here's how I justified it. The car looks tame without at least the ZR1 spoiler on the back. Any mistakes I made would be covered by the spoiler and never be seen. I do agree about the lack of lining up with factory holes, but the non-ZR1 doesn't have the holes anyway. If I hadn't switched from the ZR1 spoiler to this one, I would have 4 less holes drilled. ;) If you see the video I just released kzbin.info/www/bejne/ommVg6d_rMaIopo there were holes in the front from a previous owner, too!

[@jfiler21]

You forgot to show us what the car looks like with the spoiler on...😐

[@InJasonsGarage]

Yes, you are correct. So here's the follow up video to solve that problem. 😎 facebook.com/1806821076074111/posts/2519843388105206/

[@90lxfox3]

too bad this wont fit a c5

[@InJasonsGarage]

I agree!

[@MT_53]

For $900???? No thanks. Too "look at me" for my tastes.

[@mattwist5125]

Looks rediculous.

[@InJasonsGarage]

Yeah, I agree. VERY rediculous. 😁