Install an Air Horn on Your Truck

[@13ghosts31]

To me, it sounded like only one of your stock horns were working. I had that issue on my 98 f150. Once I got both of my stock horns working, I added another set of similar snail horns and it sounded awesome.

[@DaylnD]

Excellent video brother! About to do the same to my F150

[@flintmichels3663]

Well done! I saw many vids showing a separate button to trigger the relay. No idea why people think that is needed.

[@joseferrer113]

Good video if you showed the splicing of the wires and the wire with the fuse and size of the fuse the video would clear the confusion. But overall great video

[@edwinguinyard219]

You didn't show the wiring from the main horn to the ad on horn, the two wires that you separated went where?

[@RaybuckAutoBodyParts]

I just spliced the new horn wires into the existing wires. So I cut the existing wires and then just twisted them together and put them into the end of the electrical butt connector that was on the new horn.

[@robhoffecker2086]

Could you please show a picture of the splicing? Thanks....

[@RandallPress]

Do I need the relay or can I just jump the pos and neg?

[@RaybuckAutoBodyParts]

You need the relay

[@karimbouabid7168]

Love the airhorn I would like to buy the same one. Can you send me some information on how to get one Thank you kindly

[@RaybuckAutoBodyParts]

Got this one on Amazon. Here's a link www.amazon.com/gp/product/B07TRBYC8Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

[@anamulgaming6456]

Can i install without reley

[@RaybuckAutoBodyParts]

you need the relay to provide power to the horn

[@Rj_preikschas]

What colours go to what? Does blue go to black or does blue go to yellow?

[@RaybuckAutoBodyParts]

For this horn, blue went to yellow.

[@aarongreen8257]

Your stock horn sounds dumb because only one of them was working. One horn is low tone, the other horn is high tone. Your low tone horn was broken so you were only hearing the high tone one.

[@robertread4000]

Makes it sound real easy if the whole front ends off your truck

[@jamoss2007]

Not deep enough